Mobil 1 oil Ads | Gumtree Classifieds South Africa

Clear All

Results for mobil 1 oil in "mobil 1 oil" in South Africa in South Africa

DAB grinder FX submersible pump 1.1kW single phase

R 31,659.01

Save

Please note that shipping and installation is not included.DAB grinder FX submersible pump 1.1kW single phase with a shredder designed for lifting and transferring wastewater in civil and commercial environments. Grinder FX is certified EN 12050-1. The presence of the shredder makes the pump suitable for systems with small diameter pipes or those requiring high pressures. Shredder in AISI 630 stainless steel. Ideal pump for replacements thanks to its reduced dimensions and to both flanged and threaded delivery ports. Technical Data of the DAB grinder FX submersible pump 1.1kW single phase Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies Construction features of the pump Pump body and impeller in cast iron, shredder in AISI 630. Motor shaft in AISI 304 stainless steel. Double mechanical seal in SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid, independent of the direction of rotation. Delivery port both flanged and threaded. Construction features of the motor Single-phase asynchronous motor (MA / MNA versions) and three-phase version motor (TNA versions). The rotor is mounted on lubricated bearings. Continuous operation in S1 with the motor completely immersed. Dry running for a maximum time of 10 minutes. Over-temperature sensors in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase versions with starter and capacitor in a separate panel, MA versions with float for automatic operation. In the three-phase motors the over-temperature sensor connection is responsibility of the user.

10h

Mbombela / Nelspruit

DAB grinder FX submersible pump 1.1kW three phase

R 30,389

Save

Please note that shipping and installation is not included.DAB grinder FX submersible pump 1.1kW three phase with a shredder designed for lifting and transferring wastewater in civil and commercial environments. Grinder FX is certified EN 12050-1. The presence of the shredder makes the pump suitable for systems with small diameter pipes or those requiring high pressures. Shredder in AISI 630 stainless steel. Ideal pump for replacements thanks to its reduced dimensions and to both flanged and threaded delivery ports. Technical Data of the DAB grinder FX submersible pump 1.1kW three phase Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies Construction features of the pump Pump body and impeller in cast iron, shredder in AISI 630. Motor shaft in AISI 304 stainless steel. Double mechanical seal in SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid, independent of the direction of rotation. Delivery port both flanged and threaded. Construction features of the motor Single-phase asynchronous motor (MA / MNA versions) and three-phase version motor (TNA versions). The rotor is mounted on lubricated bearings. Continuous operation in S1 with the motor completely immersed. Dry running for a maximum time of 10 minutes. Over-temperature sensors in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase versions with starter and capacitor in a separate panel, MA versions with float for automatic operation. In the three-phase motors the over-temperature sensor connection is responsibility of the user.

10h

Mbombela / Nelspruit

DAB grinder FX submersible pump 1.5kW single phase

R 34,823

Save

Please note that shipping and installation is not included.DAB grinder FX submersible pump 1.5kW single phase with a shredder designed for lifting and transferring wastewater in civil and commercial environments. Grinder FX is certified EN 12050-1. The presence of the shredder makes the pump suitable for systems with small diameter pipes or those requiring high pressures. Shredder in AISI 630 stainless steel. Ideal pump for replacements thanks to its reduced dimensions and to both flanged and threaded delivery ports. Technical Data of the DAB grinder FX submersible pump 1.5kW single phase Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies Construction features of the pump Pump body and impeller in cast iron, shredder in AISI 630. Motor shaft in AISI 304 stainless steel. Double mechanical seal in SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid, independent of the direction of rotation. Delivery port both flanged and threaded. Construction features of the motorSingle-phase asynchronous motor (MA / MNA versions) and three-phase version motor (TNA versions). The rotor is mounted on lubricated bearings. Continuous operation in S1 with the motor completely immersed. Dry running for a maximum time of 10 minutes. Over-temperature sensors in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase versions with starter and capacitor in a separate panel, MA versions with float for automatic operation. In the three-phase motors the over-temperature sensor connection is responsibility of the user.

10h

Mbombela / Nelspruit

DAB grinder FX submersible pump 0.7kW single phase

R 28,495

Save

Please note that shipping and installation is not included.DAB grinder FX submersible pump 0.7kW single phase with a shredder designed for lifting and transferring wastewater in civil and commercial environments. Grinder FX is certified EN 12050-1. The presence of the shredder makes the pump suitable for systems with small diameter pipes or those requiring high pressures. Shredder in AISI 630 stainless steel. Ideal pump for replacements thanks to its reduced dimensions and to both flanged and threaded delivery ports. Technical Data of the DAB grinder FX submersible pump 0.7kW single phase Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 \ ATEXSpecial versions on request: different cable lengths, different voltages and frequencies Construction features of the pump Pump body and impeller in cast iron, shredder in AISI 630. Motor shaft in AISI 304 stainless steel. Double mechanical seal in SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid, independent of the direction of rotation. Delivery port both flanged and threaded. Construction features of the motorSingle-phase asynchronous motor (MA / MNA versions) and three-phase version motor (TNA versions). The rotor is mounted on lubricated bearings. Continuous operation in S1 with the motor completely immersed. Dry running for a maximum time of 10 minutes. Over-temperature sensors in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase versions with starter and capacitor in a separate panel, MA versions with float for automatic operation. In the three-phase motors the over-temperature sensor connection is responsibility of the user.

10h

Mbombela / Nelspruit

DAB grinder FX submersible pump 1.5kW three phase

R 32,907

Save

Please note that shipping and installation is not included.DAB grinder FX submersible pump 1.5kW three phase with a shredder designed for lifting and transferring wastewater in civil and commercial environments. Grinder FX is certified EN 12050-1. The presence of the shredder makes the pump suitable for systems with small diameter pipes or those requiring high pressures. Shredder in AISI 630 stainless steel. Ideal pump for replacements thanks to its reduced dimensions and to both flanged and threaded delivery ports. Technical Data of the DAB grinder FX submersible pump 1.5kW three phase Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies Construction features of the pump Pump body and impeller in cast iron, shredder in AISI 630. Motor shaft in AISI 304 stainless steel. Double mechanical seal in SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid, independent of the direction of rotation. Delivery port both flanged and threaded. Construction features of the motorSingle-phase asynchronous motor (MA / MNA versions) and three-phase version motor (TNA versions). The rotor is mounted on lubricated bearings. Continuous operation in S1 with the motor completely immersed. Dry running for a maximum time of 10 minutes. Over-temperature sensors in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase versions with starter and capacitor in a separate panel, MA versions with float for automatic operation. In the three-phase motors the over-temperature sensor connection is responsibility of the user.

10h

Mbombela / Nelspruit

DAB grinder FX submersible pump 0.7kW three phase

R 27,226

Save

Please note that shipping and installation is not included.DAB grinder FX submersible pump 0.7kW three phase with a shredder designed for lifting and transferring wastewater in civil and commercial environments. Grinder FX is certified EN 12050-1. The presence of the shredder makes the pump suitable for systems with small diameter pipes or those requiring high pressures. Shredder in AISI 630 stainless steel. Ideal pump for replacements thanks to its reduced dimensions and to both flanged and threaded delivery ports. Technical Data of the DAB grinder FX submersible pump 0.7kW three phase Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies Construction features of the pump Pump body and impeller in cast iron, shredder in AISI 630. Motor shaft in AISI 304 stainless steel. Double mechanical seal in SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid, independent of the direction of rotation. Delivery port both flanged and threaded. Construction features of the motorSingle-phase asynchronous motor (MA / MNA versions) and three-phase version motor (TNA versions). The rotor is mounted on lubricated bearings. Continuous operation in S1 with the motor completely immersed. Dry running for a maximum time of 10 minutes. Over-temperature sensors in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase versions with starter and capacitor in a separate panel, MA versions with float for automatic operation. In the three-phase motors the over-temperature sensor connection is responsibility of the user.

10h

Mbombela / Nelspruit

DAB grinder FX submersible pump 2.2kW three phase

R 36,071

Save

Please note that shipping and installation is not included.DAB grinder FX submersible pump 2.2kW three phase with a shredder designed for lifting and transferring wastewater in civil and commercial environments. Grinder FX is certified EN 12050-1. The presence of the shredder makes the pump suitable for systems with small diameter pipes or those requiring high pressures. Shredder in AISI 630 stainless steel. Ideal pump for replacements thanks to its reduced dimensions and to both flanged and threaded delivery ports. Technical Data of the DAB grinder FX submersible pump 2.2kW three phase Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies Construction features of the pump Pump body and impeller in cast iron, shredder in AISI 630. Motor shaft in AISI 304 stainless steel. Double mechanical seal in SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid, independent of the direction of rotation. Delivery port both flanged and threaded. Construction features of the motor Single-phase asynchronous motor (MA / MNA versions) and three-phase version motor (TNA versions). The rotor is mounted on lubricated bearings. Continuous operation in S1 with the motor completely immersed. Dry running for a maximum time of 10 minutes. Over-temperature sensors in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase versions with starter and capacitor in a separate panel, MA versions with float for automatic operation. In the three-phase motors the over-temperature sensor connection is responsibility of the user.

10h

Mbombela / Nelspruit

Save

We offer car diagnostics to pinpoint the root of any issues your car may be experiencing. Our diagnostics include a thorough inspection of your car’s engine, transmission, suspension, and more to ensure that no problem goes undiscovered. And with our mobile service, you don’t have to waste any time driving to a mechanic – we’ll come to you and get the job done quickly and efficiently. Diagnostic scan/reset include Crank sensor Cam sensor Map sensor O2 oxygen sensor Throttle body sensor Coolant temp sensor Engine knock sensor Oil control valve sensor Gearbox range selector And many more. We are also offering View4You services: If you are looking at buying a used car or bakkie call us to View4You at a very affordable price. We can also assist in Cluster Correction on Volkswagen Polo vivo, Golf Mk1,3,5. Volkswagen Jetta 3,4,5 Seat Ibiza, if your original cluster burned or not working as it should anymore. Call/Whatsapp me for more details 0..7..2..6..1..3..1..5..8..9 0..6..7..2..7..7..6..6..8..0 Audi diagnostics Bmw diagnostics Ford diagnostics Opel diagnostics Mercedes diagnostics Hyundai diagnostics Nissan diagnostics Peugeot diagnostics Porsche diagnostics Proton diagnostics Renault diagnostics Rollsroyce diagnostics Rover diagnostics Saab diagnostics Seat diagnostics Skoda diagnostics Smart diagnostics Spark diagnostics Sprinter diagnostics Ssanyong diagnostics Subaru diagnostics Suzuki diagnostics Tata diagnostics Toyota diagnostics Vauxhall diagnostics Volkswagen diagnostics Volvo diagnostics Please enquire if your vehicle isn't listed Car idle problems diagnostic Car smoking diagnostic Car accelerator diagnostic Car no power diagnostic Car high fuel diagnostic Car overheating diagnostic Car missfire diagnostic Car injector coding Car dpf diagnostic Car catalyst diagnostic Car throttle body learning Car idle learning diagnostic Car turbo learning diagnostics Car gearbox learning diagnostics Dpf Regeneration diagnostics Brakpan car diagnostics | Benoni car diagnostics | Boksburg car diagnostics | Springs car diagnostics | Kempton Park car diagnostics | Bonaero Park car diagnostics | Germiston car diagnostics | Alberton car diagnostics | Primrose car diagnostics | Jetpark car diagnostics | Edelweiss car diagnostics | Nigel car diagnostics | Visagiepark car diagnostics | Dal Fouche car diagnostics | Minnebron car diagnostics | Sally's car diagnostics | Impala park car diagnostics | boksburg north car diagnostics and all areas in between

VERIFIED

Boksburg

Save

VERIFIED

Springs

Save

VERIFIED

Brakpan

Save

VERIFIED

Other

Save

VERIFIED

Germiston

Save

VERIFIED

Benoni

Save

14d

VERIFIED

Boksburg

Save

14d

VERIFIED

Brakpan

Save

Salary will be R31 per hour and overtime will be paid for working more than 45 hours in a week cycle. Salary with tips can range from R7000 - R11 000Valid Drivers License: a Code C1 (Code 10) license is essential.Professional Driving Permit (PrDP): Required for anyone transporting goods for an income.To obtain this, you must:? Be at least 18 years old for goods vehicles.Pass a police criminal background check (no serious driving or violent offenses in the last five years).? Provide a medical fitness certificate from a doctor.Identification: A valid South African ID or a work permit for foreign nationals.Cold Chain Maintenance: Drivers must be able to maintain proper temperature control to ensure product safety.Physical Fitness: Ability to lift heavy loads (up to 20kg) and stand for extended periods.Communication: Proficiency in English for professional customer interaction.Technical Skills: Familiar with GPS navigation and basic mobile device usage, we use an app called Loop that has all the drop-offs that require a driver to complete each task and upload a photo of a signed invoice.Experience: at least 12 years of delivery or customer service experience.Other duties might include helping around the factory after deliveries are done.Will need to pack orders in Walk in Freezer ( should be able to work in colder conditions)Requires a hard working individual that can work every second Saturday (will then have an off day in the week) and working hours are from 8am-6pm with 60min lunch and 15min paid tea break.Factory in Retreat and need to be able to get to work easily.Drop off locations can reach from 4-12 stops in a day. We have 6 of our own shop locations and up to 30 Engen locations. Daily routes normally consider Muizies, SSW, Stellies, other Engens in Northern Suburbs in case they ordered and this route will be on mostly a Monday, Wednesday and Friday. The other route will be for our CPT shops in Constantia, Noorhoek, Newlands and other incoming orders in the Cape Town region on Tuesdays, Thursdays and Saturdays.Might be required to do sleep-over work trips when we deliver to the Garden route (accomodation provided by company)Need to keep vehicles & Walk-in freezer tidy without fail.Need to monitor vehicles box temperature to ensure ice cream remains frozen on longer trips and work fast when opening the doors, monitor oil levels and fuel in order to fill up at certain fuel depots available to us. https://www.jobplacements.com/Jobs/A/Assistant-Driver-Code-10-License-1248955-Job-Search-1-7-2026-6-22-46-AM.asp?sid=gumtree

13d

Job Placements

Bo-Kaap

Save this search and get notified

when new items are posted!

"mobil 1 oil" in South Africa

mobil 1 oil in South Africa (96 results)

Results for mobil 1 oil in "mobil 1 oil" in South Africa in South Africa