Please note that our Terms & Conditions and Privacy Notice are applicable.
Pay & Ship
Buy with confidence. Secure payment options & nationwide delivery. Learn more
Filter & refine
Clear All
Results for water pump in "water pump" in Mbombela / Nelspruit in Mbombela / Nelspruit
1
R 2,614
SavedSave
Please note that shipping and installation is not included.Firstly the DAB KPF Peripheral centrifugal pump with controller
0.37kW with compact dimensions. Able to generate high heads and suitable
for domestic installations, water supply systems, small gardening
applications, draining and filling cisterns, and for small industrial
uses.
Operating range: from 5 to 50 l/m with head up to 84 meters.
Brass pump body and motor support for KP 60/6 and KP 60/12. Cast iron
pump body with radial suction for KP and KPS, frontal suction for KPF.
Brass impeller. Carbon/ceramic mechanical seal. IP44.
Liquid temperature range: from 0 °C to +35 °C for domestic use, from -10°C to +50°C for other uses.
Controller Data:
Supply voltage: 1×230 Vac (+/- 10%) 50/60 HzMax. current: 12 AOutput: 1,1 – 2.2 kWProtection rating: IP 65Max. working pressure: 10 barMinimum flow rate: ≈ 1 l/minMale connection: 1’’ BSPRestart pressure setting: 1,5 Bar (non-adjustable)Max. working temperature: 60°C
The controller on the DAB KPF Peripheral centrifugal pump with
controller 0.37kW. Quick Press is an on/off device designed to control
the pump‘s starting and stopping based on demand. It stops the pump when
there is no water and protects it from dry running. It can be mounted
on surface and submersible pumps alike. The compact device is reliable
and designed, above all, for residential applications.
Correct quick press/pump pairingThe pump to be paired with the Quick Press device must not only meet
the system‘s water demand, but must also produce 1.5 bar more pressure
(with fixtures closed Q=0) than the Quick Press restart pressure. When
there is a water demand, namely when fixtures are opened, Quick Press‘s
preset restart pressure (1.5 bar) must overcome the back pressure
generated by the water column exerting pressure on the pump. Hence Quick
Press‘s restart pressure must be at least 0.5 bar higher than the back
pressure generated by the height of the water column.
11d
Mbombela / Nelspruit
1
R 4,769.05
SavedSave
Please note that shipping and installation is not included.The Aquasystem Vertical
Pressure Tanks With Replaceable Membrane Aquasystem-60L. In hydraulic
applications for sanitary water circuits, such as pressure groups in
combination with pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard precharge pressure – 1.5 bar
Connection – 1″
Aquasystem Vertical Pressure Tanks With Replaceable Membrane Aquasystem-60L
The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be overlooked.
2d
Mbombela / Nelspruit
1
R 1,008.55
SavedSave
Please note that shipping and installation is not included.The Aquasystem Vertical
Pressure Tanks With Replaceable Bladder 24L. Is an element used in
hydraulic applications for sanitary water circuits, such as pressure
groups in combination with pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
pre charged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 8 bar
Standard pre charge pressure – 1.5 bar
Connection – 1″
Aquasystem Vertical Pressure Tanks With Replaceable Bladder 24L
The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be overlooked.
2d
Mbombela / Nelspruit
1
R 7,243.85
SavedSave
Please note that shipping and installation is not included.The Aquasystem Vertical
Pressure Tanks With Replaceable Bladder 100L. Is an element used in
hydraulic applications for sanitary water circuits, such as pressure
groups in combination with pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard pre charge pressure – 1.5 bar
Connection – 1″Aquasystem Vertical Pressure Tanks With Replaceable Bladder 100L. The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be overlooked.
2d
Mbombela / Nelspruit
1
R 5,071.50
SavedSave
Please note that shipping and installation is not included.The Aquasystem Horizontal
Pressure Tanks 60l Horizontal. Is an element used in hydraulic
applications for sanitary water circuits, such as pressure groups in
combination with pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure. In order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard pre charge pressure – 1.5 bar
Connection – 1″
Aquasystem Horizontal Pressure Tanks 60l Horizontal
The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be overlooked.
2d
Mbombela / Nelspruit
1
R 3,844.45
SavedSave
Please note that shipping and installation is not included.The Aquasystem Vertical
Pressure Tanks With Replaceable Bladder 50L. Is an element used in
hydraulic applications for sanitary water circuits, such as pressure
groups in combination with pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
pre charged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard pre charge pressure – 1.5 bar
Connection – 1″
Aquasystem Vertical Pressure Tanks With Replaceable Bladder 50L
The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be over looked.
2d
Mbombela / Nelspruit
1
R 16,504.80
SavedSave
Please note that shipping and installation is not included.The Aquasystem Vertical
Pressure Tanks With Replaceable Bladder 300L. Is an element used in
hydraulic applications for sanitary water circuits, such as pressure
groups in combination with pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
pre charged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard pre charge pressure – 2 bar
Connection – 1 1/2″
Aquasystem Vertical Pressure Tanks With Replaceable Bladder 300L
The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.
They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be overlooked.
2d
Mbombela / Nelspruit
1
R 25,022.85
SavedSave
Please note that shipping and installation is not included.The Aquasystem Vertical
Pressure Tanks With Replaceable Bladder 500L. Is an element used in
hydraulic applications for sanitary water circuits, such as pressure
groups in combination with pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
pre charged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard pre charge pressure – 2 bar
Connection – 1 1/2″Aquasystem Vertical Pressure Tanks With Replaceable Bladder 500L
The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safe guarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be overlooked.
2d
Mbombela / Nelspruit
1
R 13,257.20
SavedSave
Please note that shipping and installation is not included.The Aquasystem Horizontal
Pressure Tanks 200l Horizontal. Is an element used in hydraulic
applications for sanitary water circuits, such as pressure groups in
combination with pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to pre-charge air pressure stored between the membrane and the internal metal
surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue Epoxy Coated
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard pre-charge pressure – 2 bar
Connection – 1 1/4″
Aquasystem Horizontal Pressure Tanks 200l Horizontal
The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be overlooked.
2d
Mbombela / Nelspruit
1
R 7,557.80
SavedSave
Please note that shipping and installation is not included.The Aquasystem
horizontal pressure tanks 100l – VAO 100 pressure tank with replaceable
membrane is an element used in hydraulic applications for sanitary
water circuits, such as pressure groups in combination with pumps or
devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure. In order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue Epoxy Coated
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard pee-charged pressure – 1.5 bar
Connection – 1″
Aquasystem Aquasystem Horizontal Pressure Tanks 100l Horizontal
The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be overlooked.
2d
Mbombela / Nelspruit
1
R 4,023.85
SavedSave
Please note that shipping and installation is not included.The Aquasystem Horizontal
Pressure Tanks 50l Horizontal. Is an element used in hydraulic
applications for sanitary water circuits, such as pressure groups in
combination with pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
pre charged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue Epoxy Coated
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard pre charge pressure – 1.5 bar
Connection – 1″
Aquasystem Horizontal Pressure Tanks 50l Horizontal
The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be overlooked.
2d
Mbombela / Nelspruit
1
R 17,590.40
SavedSave
Please note that shipping and installation is not included.The Aquasystem Vertical
Hot Galvanized Dipped Pressure Tanks With Replaceable Bladder 200L. Is
an element used in hydraulic applications for sanitary water circuits,
such as pressure groups in combination with pumps or devices such as
anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
pre charged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Galvanized Steel
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard pre charge pressure – 2 barConnection – 1 1/4″Aquasystem Vertical Hot Galvanized Dipped Pressure Tanks With Replaceable Bladder 200L
The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be overlooked.
2d
Mbombela / Nelspruit
1
R 12,940.95
SavedSave
Please note that shipping and installation is not included.The Aquasystem Vertical
Pressure Tanks With Replaceable Bladder 200L. Is an element used in
hydraulic applications for sanitary water circuits, such as pressure
groups in combination with pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
pre charged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard pre charge pressure – 2.5 bar
Pressure after replacing bladder – 0.2 bar less than your cut-in pressure.
Connection – 1 1/2″Aquasystem Vertical Pressure Tanks With Replaceable Bladder 200L
The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be overlooked.
2d
Mbombela / Nelspruit
1
R 17,590.40
SavedSave
Please note that shipping and installation is not included.The Aquasystem Vertical
Hot Galvanized Dipped Pressure Tanks With Replaceable Bladder 200L. Is
an element used in hydraulic applications for sanitary water circuits,
such as pressure groups in combination with pumps or devices such as
anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
pre charged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Galvanized Steel
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard pre charge pressure – 2 bar
Connection – 1 1/4″Aquasystem Vertical Hot Galvanized Dipped Pressure Tanks With Replaceable Bladder 200L
The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be overlooked.
2d
Mbombela / Nelspruit
1
R 32,570.30
SavedSave
Please note that shipping and installation is not included.The Aquasystem Vertical
Galvanized Dipped Pressure Tanks Replaceable Bladder 500L is an element
used in hydraulic applications for sanitary water circuits, such as
pressure groups in combination with pumps or devices such as anti-water
hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
pre charged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Galvanized Steel
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard pre charge pressure – 2 bar
Connection – 1 1/4″
Aquasystem Vertical Galvanized Dipped Pressure Tanks Replaceable Bladder 500LA quality hydro press from AQUASYSTEM
that has a food-approved membrane that separates water and air inside
the container. The membrane is easily replaceable. All our vessels are
manufactured, tested and checked according to current European
regulations.
The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be overlooked.
2d
Mbombela / Nelspruit
1
R 3,836.40
SavedSave
Please note that shipping and installation is not included.The Aquasystem Vertical
Hot Galvanized Dipped Pressure Tanks With Replaceable Bladder 60L. Is
an element used in hydraulic applications for sanitary water circuits,
such as pressure groups in combination with pumps or devices such as
anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure. In order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
External finish color -Galvanized Steel
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard precharge pressure – 2 bar
Connection – 1″
Aquasystem Vertical Hot Galvanized Dipped Pressure Tanks Replaceable Bladder 60L
The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be overlooked.
2d
Mbombela / Nelspruit
1
R 6,463
SavedSave
Please note that shipping and installation is not included.Firstly the feka bvp submersible pump 0.75kW application. Following
the powerful submersible pumps for draining and emptying applications.
Suitable for pumping dirty water with solid particle size up to 38 mm.
Automatic version with float switch for automatic pump start and stop
also available.
Construction features of the pump
Hydro resistant techno polymer pump body, wear-free impellers, cover,
and suction grid. Corrosion and oxidation resistant materials.
Construction features of the motor
Submersible type continuous duty asynchronous motor. Thermal overheating protection. Wear-resistant motor shaft.
Technical Data of the Feka bvp submersible pump 0.75kW
Operating range: From 1 to 18 m3/h with head up to 12 meters.
Liquid temperature range: From 0 °C to +35 °C.
Pumped liquid: Dirty water with maximum solid particle size 38 mm.
Max. immersion depth: 7 meters.
HP: 1
Important to realize to ensure the proper operation of the pump, it is important to comply with the following recommendations:
The pump must never be allowed to run dry.Never leave the pump in operation when the delivery pipe is clogged.The pump must be positioned so that the holes on the suction side cannot be partially or totally clogged by dirt.The pump must only be used when it is immersed in water. If the
water runs out, the pump must be stopped immediately by removing the
plug from the power supply.Pay careful attention when the pump is operated in manual mode.The pump must be placed in a stable position inside a collection pit or in the lowest part of the place where it is installed.
11d
Mbombela / Nelspruit
1
R 4,874
SavedSave
Please note that shipping and installation is not included.First thing to remember is the DAB nova for salt water 0.2kW a multi-
purpose submersible pump specifically constructed for use in salt
water. Furthermore anti-corrosive and rust-proof materials. As well as
motor casing, shaft, screws and nuts made of stainless steel AISI 316.
The pumps are designed to pump clean water or water containing solids
with a diameter from 5 to 10 mm.
Cable with tin plated conductors. Motor with thermic overload
protection. Wear resistant shaft and impeller. Excellent cooling of the
motor that enables the pump to operate even when it is partially
submersible. Manual and automatic version with start/stop float switch.
Supplied with power cable with plug and self-sealing fitting.
Technical Data of the DAB nova for salt water 0.2kW
Operating range: from 1 to 7.5 m3/h with head up to 6 meters.
Liquid temperature range: from 0 °C to +35 °C for domestic use.
Pumped liquid: dirty water, without fiber, including salt water.
Max. immersion depth: 7 meters.
Power input: 1 x 230 V
Application
The vertical delivery draining submersible pump has been specifically
built for draining applications in salt water installations. It may
also be used as a portable pump in emergency situations. The built-in
float level switch, in the automatic version, allows fixed installation,
ensuring automatic operation.
Construction features of the pump
Hydro resistant techno polymer pump body, cover, and suction grid.
AISI 316 stainless steel motor, rotor shaft, and bolts and screws.
Cable with tin plated conductors.
Construction features of the motorFinally submersible type continuous duty asynchronous motor. Thermal overheating protection.
11d
Mbombela / Nelspruit
1
R 142,082.31
SavedSave
Please note that shipping and installation is not included.
Firstly a sales agent must recommend the above pretreatment setup
based on a water analysis report from the lab for it to be guaranteed to
work. As shown above for your 2000LPH RO system – 4 x 4080 membrane – 3
phase pump.
A water analysis report is very important as it
determines the pretreatment setup needed to be installed before the
reverse osmosis system. As you can see on the sketch above, the
pretreatment consists of a Sand/Glass Filter, Carbon Filter, and
Antiscalant Dosing system.
Pre treatment
setups can consist of even more items installed before the 2000LPH RO
System. The water analysis report lists items that may be needed.
Chlorine Dosing SystemUltrafiltration SystemDmi-65 Iron Removal Media Filter SystemOzone GeneratorFlocculant System
All in all we have our own qualified technicians train by the
manufacturers of the equipment to do the installation running of the
setup.
Training can also be offered to the people you want to be the ones installing your setup instead of our technicians.
TWC’s 2000 l/ph Reverse Osmosis System is part of a family of reverse
osmosis units specifically designed for operation with fresh and
brackish feed waters having TDS
values below 1,500ppm. As a result customers can access these Models
with permeate output of 2000 liters/hr as shown in the specifications.
Benefits
Specialized Micro-Computer ControllerFully Equipped and CustomizableSuper-Quiet Horizontal 3 phase PumpLow Energy ConsumptionHigh Flow Low-Energy MembraneLow MaintenanceCompact Space Saving Design
The reverse osmosis systems have been widely used for commercial
purposes such as treatment of wastewater, desalination, minerals
reclamation, and purification of water. If you have been searching for
the best and most efficient Industrial RO system, then you have landed
at the right place. At TWC, we provide the best quality RO water units
that can meet your needs, expectations, and budget.
As a matter of fact we provide the highest standard and compact
commercial reverse osmosis system at an affordable pricing range. All
our RO systems are highly durable and we guarantee that they can be last
for many years with proper care and maintenance.
Standard Features
Pre-filtered water is fed to the RO system by means of the vertical
centrifugal pump. The pump is controlled by the following parameters,
namely:
Product tank high level, indicated by a float level switch.Raw supply tank low level, indicated by a float level switch.Low pressure condition, indicated by the pressure switch.Timer unit contact.
The RO system generates two steams of water, a purified stream
(permeate) is directed to the product tank, while the concentrated
stream is directed to the drain. A ball valve on the concentrate line
allows for manual flushing of the RO system.
Flow rate through the system can be
monitored by the in-line rotameters on the permeate and concentrate
lines.
1d
Mbombela / Nelspruit
1
R 4,630
SavedSave
Please note that shipping and installation is not included.First thing to remember the DAB Novapond submersible pump 0.2kW is
specifically designed for the re circulation of water in ponds. To
create waterfalls and water features. They are designed to pump clean
water containing solid particles with a maximum diameter of 10 mm.
Suitable for continuous operation. Designed for horizontal or vertical
installation. Environmentally safe. Materials resistant to corrosion and oxidation. Motor with thermal
overload protection. Adjustable suction filter to enable transit of
solid particles with a diameter from 5 mm to 10 mm. Supplied with power
cable and plug, and self-sealing coupling.
Construction features of the pump
Hydro resistant techno polymer pump body, wear-free impellers, cover,
and suction grid. Corrosion and oxidation resistant materials.
Construction features of the motor
Submersible type continuous duty asynchronous motor. Thermal overheating protection. Wear-resistant motor shaft.
Technical Data of the DAB Novapond submersible pump 0.2kW
Operating range: From 1 to 14 m³/h with head up to 9.4 meters. Suitable for continuous operationLiquid temperature range: From 0 °C to +35 °C.Pumped liquid: Clean water, without fibers and with particles with maximum diameter of 10 mmMaximum immersion depth: 7 meters. Power input 50 Hz: 1 x 230 VHP 0.28In & Outlet: 1.1/4″Water Quality: Designed to pump clear water with soft solid particles up to 10mm in diameterConstruction: Made from corrosion and oxidation-resistant materials, including stainless steel componentsSubmersible pumps work by
converting rotary energy into kinetic energy to push fluids upwards.
They are designed to be submerged in the liquid, which allows them to be
self-priming. Meaning they don’t require a suction pipe or manual
priming before use. Includes thermal overload protection, an adjustable suction filter, and a long power cable with a plug.
11d
Mbombela / NelspruitSave this search and get notified
when new items are posted!