Please note that our Terms & Conditions and Privacy Notice are applicable.
Pay & Ship
Buy with confidence. Secure payment options & nationwide delivery. Learn more
Filter & refine
Clear All
Results for Mbombela / Nelspruit in Mbombela / Nelspruit
2
Contact f/price
SavedSave
Trailer partsDropsite hidges and spring bolt
1d
Mbombela / Nelspruit2
Lowveld PowerTech SolutionsLowveld Powertech Solutions)
Our
services
Solar Instalations, maintenance and cleaning servicesGenerators maintenance
Electrical Services
House or Industrial Maintenance Service
Our
“One-Visit Clarity” strategy
We aim to leave you with clear
answers and next steps—what’s urgent, what can wait, and what improvements
will give the best reliability and value (subject to availability and site
conditions).
For
major solar providers (Partnership)
If your solar company doesn’t have a
Lowveld footprint, we can be your local partner for installations
support, maintenance, troubleshooting, and panel cleaning—serving
Nelspruit/Mbombela and surrounding areas. (Lowveld Powertech Solutions)
Contact us (Call/WhatsApp):
admin@lowveldpowertechsolutions.comLowveld Powertech Solutions)
Website: lowveldpowertechsolutions.com
1d
Mbombela / Nelspruit1
R 2,080.35
SavedSave
Please note that shipping and installation is not included.Whole house system – double
Firstly the whole house system is designed to filter out sediments and remove odor from water. This is achieved by the use of sediment filter and an activated carbon filter.
The water first flows through the sediment
filter to remover sediments such as mud, dust particles, rust, and any
suspended solids. The water then goes through the activated carbon block
filter to remove bad odors and improve the taste of the water. Finally,
the water will pass through the final polishing sediment filter to
ensure that there are no sediments left in the water so you can enjoy
clean filtered water.
The Whole house system – double will work
flawlessly with municipal water that has been tested and the system was
recommended for. The system will also work with rainwater.
Specifications
Housings: 20” BB HousingsStand: Steel Stand/Bracket – Painted In WhiteInlet/Outlet Size: 1”Filters: 20” BB PP Filters & 20” BB Activated Carbon Block FilterMax. Pressure: 5 BarMax. Flow: 2000 Liters Per HourRequired Feed Pressure: 2.5 BarDouble O-Ring SealNOTE: Because some images are for illustrative purposes only. Please
refer to the product title for reference. Please confirm stock
availability prior to purchase*
1d
Mbombela / Nelspruit1
R 4,396.68
SavedSave
Please note that shipping and installation is not included.
Whole House 3 stage with 30W UV LightExcluding cartridgesThe function of the polypropylene sediment removal filter cartridge
filter is to separate substances or particles from the liquid. The
cartridge filter is a medium to filtrate substance that flows with
liquid. Cartridge filter in this project focuses on a water filtration
system that usually used at houses and small-scale industries. The
volume flow rate relates to the pressure of the water that flows through
the pipe system.
Cartridge filter function as a media that reduced pressure from the
water flow and call pressure drop. Sediment sand particles function as
particles that flow with the water and will filtrate with a cartridge
filter. Sediment sand makes contact on the surface of the cartridge
filter depend on the volume flow rate of water. This situation makes the
filtration system has different pressure on the entrance and the exit
of the cartridge housing. Different pressure call pressure drop
represents the pressure drop of the cartridge.
1d
Mbombela / Nelspruit1
R 2,481.52
SavedSave
Please note that shipping and installation is not included.Function of 3 Stage 20″ BB on frame (Excluding cartridges):
The function of the 3 Stage 20″ BB on frame (Excluding cartridges).
Firstly the polypropylene sediment removal filter cartridge filter is to
separate substances or particles from the liquid. The cartridge filter
is a medium to filtrate substance that flows with liquid. Cartridge
filter in this project focuses on a water filtration system that usually
used at houses and small-scale industries.
The volume flow rate relates to the pressure of the water that flows
through the pipe system. Cartridge filter function as a media that
reduced pressure from the water flow and call pressure drop. Sediment
sand particles function as particles that flow with the water and will
filtrate with a cartridge filter.
Sediment sand makes contact on the surface of the cartridge filter
depend on the volume flow rate of water. This situation makes the
filtration system has different pressure on the entrance and the exit of
the cartridge housing. Different pressure call pressure drop represents
the pressure drop of the cartridge.
The pressure drop can relate to the volume flow rate and determining
the life span and maximum condition of the cartridge filter. The maximum
clogging condition happens because the pressure of the cartridge filter
does not increase anymore and the cartridge filter has fully clogged
with sediment sand.
The Whole house system is a simple way of removing unwanted particles from the water supply to your home.Household
drinking water treatment. The three-stage filtration system can
effectively improve the quality of household drinking water, remove
harmful substances such as silt, residual chlorine, heavy metals, etc.
in the water, and ensure the health of family members.
1d
Mbombela / Nelspruit1
SavedSave
Minimum requirements: MatricTertiary qualification in Business Management or related5 Years experience in a similar roleMust have experience in client relationships and new business developmentMust be willing to travel across the whole of SAComputer literateValid drivers license and own reliable transportConsultant: Liandri van Blerk - Dante Personnel Mpumalanga
https://www.executiveplacements.com/Jobs/B/Business-Development-Manager-1229773-Job-Search-10-13-2025-10-33-06-AM.asp?sid=gumtree
1d
Executive Placements
1
SavedSave
Minimum requirements: Matric certificate1 to 2 years experience in a similar roleProficient in MS OfficeFully bilingual in English and AfrikaansStrong verbal and written communication skillsValid drivers license and reliable transportConsultant: Mine van Wyk - Dante Personnel Mpumalanga
https://www.jobplacements.com/Jobs/A/Administrator-1253740-Job-Search-01-20-2026-04-34-54-AM.asp?sid=gumtree
1d
Job Placements
1
SavedSave
Job Introduction: Branch Security Officer (Senior / Management level) G4S Cash Solutions (SA), a leading provider of integrated cash management solutions, has a vacancy for Branch Officer in Nelspruit. The Branch Officer would be assisting the Branch Manager by maintaining effective branch security and ensuring that standard security operating procedures are adhered to by all relevant staff The successful incumbent is a self-starter with a proven track record in maintaining company policy, adopting best practices, and is able to exercise sound judgement in the pursuit of the achievement of the goals of the organisation, and understanding the role which Security plays within a successful business unit. The incumbent will be expected to be results driven and to live the values of the organisation Main Responsibilities:- Responsible and accountable for effective Branch Security- Reports and Registers- Implement and evaluate security operating procedure- Control and maintenance of equipment- Management and Supervision of staff- Health and Safety Skills:- Police, Military or 2 years in CIT field- Investigations - Computer skills- Acting professionally- Communication skills (written & verbal)- Numerical skills- Analytically strong Requirements: - Grade 12 (Matric Certificate)- Driver Licence- PSIRA Grade B with CIT - Firearm competency : Handgun, Shotgun - with business purposes- Clear credit and crim record- Not be registered as a director of any business
https://www.jobplacements.com/Jobs/B/Branch-Officer-1253519-Job-Search-1-20-2026-5-09-12-AM.asp?sid=gumtree
1d
Job Placements
1
SavedSave
ENVIRONMENT:Our client, a South African-based company specialising in the sale and marketing of fresh fruit and vegetables on behalf of farmers across multiple channels, including markets, export, retail, and e-commerce, is seeking a dynamic Sales Representative to service the Nelspruit and surrounding areas. The ideal candidate will be responsible for building and maintaining strong relationships with buyers, driving sales growth, and ensuring exceptional customer satisfaction while consistently achieving and surpassing targets. A post-matric qualification in Sales, Marketing, or a related field will be advantageous, along with a proven track record in sales, preferably within FMCG, agricultural products, or fresh produce.DUTIES:Identify, prospect, and call on Buyers, including retailers, wholesalers, food service businesses, and distributors.Present product offerings, negotiate pricing and terms, and secure new business opportunities.Build and maintain strong, long-term relationships with existing customers to ensure repeat business.Understand Buyer requirements and provide tailored solutions to meet their needs.Meet or exceed monthly, quarterly, and annual sales targets.Develop and execute a sales plan for the territory, highlighting key Buyers and growth opportunities.Monitor market trends, pricing, and competitor activities, and provide accurate sales forecasts.Work closely with internal teams to ensure timely delivery of products and maintain high service standards.REQUIREMENTS:Matric / Grade 12 is essential.A post-matric qualification in Sales, Marketing, or a related field will be an advantage.Proven track record in sales, preferably within FMCG, agricultural products, or fresh produce.Experience calling on Buyers in retail or food service sectors would be beneficial.A valid driver’s license and own reliable vehicle are required.Knowledge of local languages (such as Setswana or Afrikaans) will be an advantage.ATTRIBUTES:Strong communication, negotiation, and relationship-building skills.Ability to work independently, be self-motivated, and driven by targets.Must be reliable, trustworthy, and able to travel extensively within the Rustenburg region
https://www.jobplacements.com/Jobs/S/Sales-Representative-Nelspruit-1253512-Job-Search-01-20-2026-02-00-19-AM.asp?sid=gumtree
1d
Job Placements
1
SavedSave
Vehicle Dealership is looking to fill a position for a Costing & Warranty Clerk for their Service department in Mbombela.Duties and responsibilities: Responsible for controlled costing, by accurately costing warranty job cards against actual work done; Achieving and maintaining Dealer standards; Ensure accurate costing on job cards and credit notes; General administration; Up to date filing system for all costing/warranty documents; Ensure that all claims adhere to policies & procedures for audit purposes.Requirements:Minimum 2 years’ experience in the motor industry as a Warranty and Costing Clerk.Experience working within a Vehicle dealership and with a corporate brand like BMW, Toyota, Mercedes-Benz, etc.Attention to detail, focused and excellent communication skills.Experience with motor industry systems such as Kerridge, Autoline etc.Motor industry experience specifically.Grade 12.Clear criminal record.Send your CV to:
https://www.jobplacements.com/Jobs/W/Warranty--Costing-Clerk-1253494-Job-Search-01-20-2026-02-00-18-AM.asp?sid=gumtree
1d
Job Placements
1
Negotiable
SavedSave
We buy empty printer ink cartridges WhatsApp or call 0670395308
1d
1
SavedSave
To hire staff from R307.00 to R351.00 per day casually or
permanently, call Kershnee at RENT A MAID - NELSPRUIT on 084 8822 012. Mon -
Fri 7am to 4pm. The Rent A Maid group has been operating for 30 years and
consists of 26 franchises across SA. No matter how big or small your cleaning
needs are, Rent A Maid provides professional and affordable domestic cleaning
services for all your regular household and corporate chores. The group has
established a 32 year reputation for supplying skilled and reliable domestic
help to homeowners across the country. Our regular house cleaning services
include a wide range of domestic duties such as laundry, ironing, vacuuming and
polishing to name a few. For a free quote contact us. We look forward to
proving why Rent A Maid is still SA's market leader in the industry. Rent A
Maid has chosen to remain a non-app based brand as we prefer the human contact
with our customers and are able to offer better support.
1d
Mbombela / Nelspruit1
R 4,405.99
SavedSave
Please note that shipping and installation is not included.The new DAB Nova submersible pump 0.55kW were redesigned to mark the
occasion of forty years on the market and to make them even more
reliable, robust and ergonomic.
As has been noted high performance. NOVA and FEKA have professional
features such as the oil chamber triple seal and lubricated bearings.
Being that better protection against corrosion Motor in AISI 304
stainless steel and shaft in AISI 431 steel for better protection
against corrosion.
Technical Data
Operating range:
Flow rate up to 16 m3/h with head up to 10.2 meters
Liquid temperature range:
From 0 °C to +35 °C for domestic use. From 0 °C to +50 °C for other uses.
Output
1.1/4″ F
Pumped liquid:
Cesspool sewage water.
Max. immersion depth: 7 meters.
Maximum dry run time: 1 minute.
Protection class: IP 68.
Insulation class: F.
Free Passage: 10 mm
Most important the DAB Nova submersible pump 0.55kW line with open
impeller is suited to all clean and waste water with solids measuring up
to 10 mm. It can be used to empty tanks, vats or cisterns, drain
flooded basements, cellars and garages, and prevent flooding when
installed in rainwater wells.It can also be used as a portable pump in emergencies to drain water
out of flooded rooms. They can also be used for emptying tanks or
cisterns. The pumps are suitable for drainage of flooded basements,
cellars and garages or to prevent flooding when installed in rainwater
collector wells, which can also be used as a portable pump in emergency
situations to drain water from flooded premises.
1d
Mbombela / Nelspruit1
Contact f/price
SavedSave
Please note that shipping and installation is not included.The new DAB Nova submersible pump 0.25kW were redesigned to mark the
occasion of forty years on the market and to make them even more
reliable, robust and ergonomic.
As has been noted high performance. NOVA and FEKA have professional
features such as the oil chamber triple seal and lubricated bearings.
Being that better protection against corrosion Motor in AISI 304
stainless steel and shaft in AISI 431 steel for better protection
against corrosion.
Technical Data
Operating range:
Flow rate up to 16 m3/h with head up to 10.2 meters
Liquid temperature range:
From 0 °C to +35 °C for domestic use. From 0 °C to +50 °C for other uses.
Output
1.1/4″ F
Pumped liquid:
Cesspool sewage water.
Max. immersion depth: 7 meters.
Maximum dry run time: 1 minute.
Protection class: IP 68.
Insulation class: F.
Free Passage: 10 mm
Most important the DAB Nova submersible pump 0.25kW line with open
impeller is suited to all clean and waste water with solids measuring up
to 10 mm. It can be used to empty tanks, vats or cisterns, drain
flooded basements, cellars and garages, and prevent flooding when
installed in rainwater wells.It can also be used as a portable pump in emergencies to drain water
out of flooded rooms. They can also be used for emptying tanks or
cisterns. The pumps are suitable for drainage of flooded basements,
cellars and garages or to prevent flooding when installed in rainwater
collector wells, which can also be used as a portable pump in emergency
situations to drain water from flooded premises.
1d
Mbombela / Nelspruit1
R 2,986
SavedSave
Please note that shipping and installation is not included.The new DAB Nova submersible pump 0.20kW were redesigned to mark the
occasion of forty years on the market and to make them even more
reliable, robust and ergonomic.
As has been noted high performance. NOVA and FEKA have professional
features such as the oil chamber triple seal and lubricated bearings.
Being that better protection against corrosion Motor in AISI 304
stainless steel and shaft in AISI 431 steel for better protection
against corrosion.
Technical Data
Operating range:
Flow rate up to 16 m3/h with head up to 10.2 meters
Liquid temperature range:
From 0 °C to +35 °C for domestic use. From 0 °C to +50 °C for other uses.
Output
1.1/4″ F
Pumped liquid:
Cesspool sewage water.
Max. immersion depth: 7 meters.
Maximum dry run time: 1 minute.
Protection class: IP 68.
Insulation class: F.
Free Passage: 5mm
Most important the DAB Nova submersible pump 0.20kW line with open
impeller is suited to all clean and waste water with solids measuring up
to 10 mm. It can be used to empty tanks, vats or cisterns, drain
flooded basements, cellars and garages, and prevent flooding when
installed in rainwater wells.
It can also be used as a portable pump in emergencies to drain water
out of flooded rooms. They can also be used for emptying tanks or
cisterns. The pumps are suitable for drainage of flooded basements,
cellars and garages or to prevent flooding when installed in rainwater
collector wells, which can also be used as a portable pump in emergency
situations to drain water from flooded premises.
1d
Mbombela / Nelspruit1
R 4,690
SavedSave
Please note that shipping and installation is not included.The new DAB Feka submersible pump 0.55kW were redesigned to mark the
occasion of forty years on the market and to make them even more
reliable, robust and ergonomic.
The submersible pump of the FEKA series is suitable for lifting
sewage water from cesspools, and is capable of handling suspended solid
matter with size up to 25 mm.
As has been noted high performance. NOVA and FEKA have professional
features such as the oil chamber triple seal and lubricated bearings.
Being that better protection against corrosion Motor in AISI 304
stainless steel and shaft in AISI 431 steel for better protection
against corrosion.
Technical Data
Operating range:
Flow rate up to 16 m3/h with head up to 7.5 meters
Liquid temperature range:
From 0 °C to +35 °C for domestic use. From 0 °C to +50 °C for other uses.
Output
1.1/4″ F
Pumped liquid:
Cesspool sewage water.
Max. immersion depth: 7 meters.
Maximum dry run time: 1 minute.
Protection class: IP 68.
Insulation class: F.
Free Passage: 25 mm
Most important the DAB Feka submersible pump 0.55kW with back flowing
impeller is suited to all clean and waste water loaded with solids
measuring up to 25 mm.It can be used to empty tanks, vats or cisterns,
drain flooded basements, cellars and garages, and prevent flooding when
installed in rainwater wells.It can also be used as a portable pump in
emergencies to drain water out of flooded rooms where there is mud or
detritus.
Domestic waste waterRainwater or groundwaterEmptying of wells or collection tanksEmptying of swimming pools or rooms prone to flooding
1d
Mbombela / Nelspruit1
R 36,071
SavedSave
Please note that shipping and installation is not included.DAB grinder FX submersible pump 2.2kW three phase with a shredder
designed for lifting and transferring wastewater in civil and commercial
environments. Grinder FX is certified EN 12050-1.
The presence of the shredder makes the pump suitable for systems with
small diameter pipes or those requiring high pressures. Shredder in
AISI 630 stainless steel. Ideal pump for replacements thanks to its
reduced dimensions and to both flanged and threaded delivery ports.
Technical Data of the DAB grinder FX submersible pump 2.2kW three phase
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
Construction features of the pump
Pump body and impeller in cast iron, shredder in AISI 630. Motor
shaft in AISI 304 stainless steel. Double mechanical seal in
SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid,
independent of the direction of rotation. Delivery port both flanged and
threaded.
Construction features of the motor
Single-phase asynchronous motor (MA / MNA versions) and three-phase
version motor (TNA versions). The rotor is mounted on lubricated
bearings. Continuous operation in S1 with the motor completely immersed.
Dry running for a maximum time of 10 minutes. Over-temperature sensors
in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase
versions with starter and capacitor in a separate panel, MA versions
with float for automatic operation. In the three-phase motors the
over-temperature sensor connection is responsibility of the user.
1d
Mbombela / Nelspruit1
R 32,907
SavedSave
Please note that shipping and installation is not included.DAB grinder FX submersible pump 1.5kW three phase with a shredder
designed for lifting and transferring wastewater in civil and commercial
environments. Grinder FX is certified EN 12050-1.
The presence of the shredder makes the pump suitable for systems with
small diameter pipes or those requiring high pressures. Shredder in
AISI 630 stainless steel. Ideal pump for replacements thanks to its
reduced dimensions and to both flanged and threaded delivery ports.
Technical Data of the DAB grinder FX submersible pump 1.5kW three phase
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
Construction features of the pump
Pump body and impeller in cast iron, shredder in AISI 630. Motor
shaft in AISI 304 stainless steel. Double mechanical seal in
SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid,
independent of the direction of rotation. Delivery port both flanged and
threaded.
Construction features of the motorSingle-phase asynchronous motor (MA / MNA versions) and three-phase
version motor (TNA versions). The rotor is mounted on lubricated
bearings. Continuous operation in S1 with the motor completely immersed.
Dry running for a maximum time of 10 minutes. Over-temperature sensors
in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase
versions with starter and capacitor in a separate panel, MA versions
with float for automatic operation. In the three-phase motors the
over-temperature sensor connection is responsibility of the user.
1d
Mbombela / Nelspruit1
R 30,389
SavedSave
Please note that shipping and installation is not included.DAB grinder FX submersible pump 1.1kW three phase with a shredder
designed for lifting and transferring wastewater in civil and commercial
environments. Grinder FX is certified EN 12050-1.
The presence of the shredder makes the pump suitable for systems with
small diameter pipes or those requiring high pressures. Shredder in
AISI 630 stainless steel. Ideal pump for replacements thanks to its
reduced dimensions and to both flanged and threaded delivery ports.
Technical Data of the DAB grinder FX submersible pump 1.1kW three phase
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
Construction features of the pump
Pump body and impeller in cast iron, shredder in AISI 630. Motor
shaft in AISI 304 stainless steel. Double mechanical seal in
SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid,
independent of the direction of rotation. Delivery port both flanged and
threaded.
Construction features of the motor
Single-phase asynchronous motor (MA / MNA versions) and three-phase
version motor (TNA versions). The rotor is mounted on lubricated
bearings. Continuous operation in S1 with the motor completely immersed.
Dry running for a maximum time of 10 minutes. Over-temperature sensors
in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase
versions with starter and capacitor in a separate panel, MA versions
with float for automatic operation. In the three-phase motors the
over-temperature sensor connection is responsibility of the user.
1d
Mbombela / Nelspruit1
R 27,226
SavedSave
Please note that shipping and installation is not included.DAB grinder FX submersible pump 0.7kW three phase with a shredder
designed for lifting and transferring wastewater in civil and commercial
environments. Grinder FX is certified EN 12050-1.
The presence of the shredder makes the pump suitable for systems with
small diameter pipes or those requiring high pressures. Shredder in
AISI 630 stainless steel. Ideal pump for replacements thanks to its
reduced dimensions and to both flanged and threaded delivery ports.
Technical Data of the DAB grinder FX submersible pump 0.7kW three phase
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
Construction features of the pump
Pump body and impeller in cast iron, shredder in AISI 630. Motor
shaft in AISI 304 stainless steel. Double mechanical seal in
SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid,
independent of the direction of rotation. Delivery port both flanged and
threaded.
Construction features of the motorSingle-phase asynchronous motor (MA / MNA versions) and three-phase
version motor (TNA versions). The rotor is mounted on lubricated
bearings. Continuous operation in S1 with the motor completely immersed.
Dry running for a maximum time of 10 minutes. Over-temperature sensors
in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase
versions with starter and capacitor in a separate panel, MA versions
with float for automatic operation. In the three-phase motors the
over-temperature sensor connection is responsibility of the user.
1d
Mbombela / NelspruitSave this search and get notified
when new items are posted!
