Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Top ads in Manufacturing Jobs
We are seeking to employ an experienced automotive trimmer with at least 5 years experience in the industryFollowing Experience required- Making new templates- Recovering of Headlining's- Seat Repairs- Door panel repairs and recovering- steering wheel recovering- Gear Knob recovering- Boat / engine covers- Seat coversMust be a neat worker , that has a passion for the industry. Ability to work under pressure and still complete the project with precision.Overtime will be required from time to time that is why reliable transport is essentialToo apply send your CV / short description of your experience too the following email address:jobspe@gmail.com
5d
Port Elizabeth
Results for jobs in Manufacturing Jobs in Eastern Cape
Heydenrychs is a wholesale meat factory that manuafctures Fresh and Processed Products.Job: Qualified BlockmanSkills: Portion Cutting/ waist control Fully Skilled on breaking down meat Good time management is important To work under pressureWe are located in Markman so transport is a must however there is a lift club from bwb / sidwell , Cotswold-Westering and Hunters areas Please ONLY APPLY if you have the proper requirements.NO PHONE CALLS OR WHATS APP EMAIL CV TO Sharon@heydenrychs.com.
5d
2
We are seeking to employ an experienced automotive trimmer with at least 5 years experience in the industryFollowing Experience required- Making new templates- Recovering of Headlining's- Seat Repairs- Door panel repairs and recovering- steering wheel recovering- Gear Knob recovering- Boat / engine covers- Seat coversMust be a neat worker , that has a passion for the industry. Ability to work under pressure and still complete the project with precision.Overtime will be required from time to time that is why reliable transport is essentialToo apply send your CV / short description of your experience too the following email address:jobspe@gmail.com
5d
1
Opportunity Available!! Our leading client in the Manufacturing Sector is looking to employ a General Admin Manager to join their dynamic team in East London.
Job Description:
Responsible for liaising and coordinating with Headquarters (HQ) - operations and logistics
Responsible for the daily management, overall planning and coordination of the departments.
Responsible for the overall management of the company's administrative logistics services: supervise the execution of logistics work and provide suggestions for improvement.
Responsible for uploading and issuing company administrative affairs; responsible for the review and standard management of office expenses, responsible for coordination between various departments.
Propose improvement plans for the company's organizational structure design.
Responsible for the company's personnel recruitment, cooperate with the implementation of the company's personnel reserves, employee career development and talent retention plans to meet personnel vacancies in various positions.
Responsible for the preparation of the company's annual training plan, supervising the implementation of various departments, inspection, and summary.
Responsible for liaising with HQ Human Resources Department, handling the companies personnel appointments, interviews, recommendations, labour contract management
Responsible for implementing and improving the salary and welfare system and supervising its
implementation; during the implementation stage.
Assist the heads of each department to implement the performance appraisal of subordinates and
organize and analyze the performance appraisal results.
Responsible for corporate culture construction, department 6S management, and employee relationship
management.
Ensure the timeliness and accuracy of incoming and outgoing raw materials, inventory management.
The formulation of the organizational structure of the raw material warehouse personnel, coordination
of the work between the purchasing department, the planning, the production, and the warehousing department.
Review the raw material warehouse operating standards and the formulation, revision, and maintenance
of operating procedures.
Carry out the inventory of raw materials according to the requirements of the Finance Department.
Ensure the timeliness and accuracy of raw material warehousing as required and conduct routine
inventory every year.
Coordinate the product inspection department to put the components into storage in a timely and
accurate manner.
Complete the delivery task in a timely and accurate manner according to the planned arrangement.
Coordinate the production department and the inspection department to carry out the inventory of finished components.
Carry out the inventory of finished components according to the requirements of the Finance Department.
Responsible for checking the entry and ex
SECTOR: Manufacturing
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93ZWJhcHAucGxhY2VtZW50cGFydG5lci5jb20vd2kvYXBwbGljYXRpb25fZm9ybS5waHA/aWQ9c3RhZmZzb2xzJnZhY2FuY3lfcmVmPUUuTDAwMTgyMy9CRw==&jid=1775597&xid=E.L001823/BG
.special-hidden
{
display: none;
}
14d
Looking for a Welder/ Steel Fabricator that has expexperience in welding frames , trailers , steel constructions etc. Must be of SOBER habits , be able to work unsupervised , deliver on dead lines , work under pressure and willing to put in the extra hours to help the company succeed. Salary will depend on expertise of the applicant.Contact 0827822521 to arrange interview.
1mo
1
Verskeie poste beskikbaar in Nederland vir jong Afrikaanse kandidate onder die ouderdom van 28 jaar. CNC Miller/Programmeerder, Millwright, PLC Scada Ingenieur, Junior Elektriese Ingenieur
2mo
Ads in other locations
We are seeking to employ a junior secondary cutter in our upholstery department. If you are interested, please send your CV and hourly rate expectation to us.info@blocoutdoor.co.zaWe are based in Epping 1
1h
A manufacturing company based in New Germany Pinetown is
seeking an Assembler.
Requirements :
·
Grade 12
·
Must be able to assemble electrical appliances.
·
Good physical condition
·
Ability to work in a team and alone.
·
ability to read and understand instructions.
Responsibilities :
·
To assemble electrical components
·
Align material and put together parts to build units.
·
Collaborating with other team members
·
Resolving any assembly problems
·
Meet all safety requirements.
·
Maintaining a clean and tidy work environment
·
Report on issues, malfunction or defective parts.
Experience :
·
Ability in using tools (e.g. clamps) and machines (e.g. electronic
drills)
Kindly email CV to careers@gpsplastics.co.za , quote
job description in subject line.
2h
1
Are you a skilled Hydraulic Technician looking for a
challenging and rewarding career opportunity? We are seeking a motivated
individual to join our team and play a key role in maintaining and servicing hydraulic
systems. If you have a strong background in hydraulic equipment maintenance,
troubleshooting, and repair, we want to hear from you!
3h
Looking for Semi Skilled Welder . Must Reside in East Rand area prefared Brakpan, Boksburg or Springs, Benoni Whatsapp your Cv to : 0684258406
4h
Job descriptionDuties:Operating and setting of a Fanuc bridge milling machine.Previous CAM experience essential.Programming using Mastercam would be advantageous.Complete QC checks on parts throughout the shift.Maintain good housekeeping.Daily machine maintenance.Competencies:Good planning and organising skills, with regards to daily job planning, tools and equipment preparation and checking of information (correct drawing revision number, queries of any confusing information or instructions prior to machining).Attention to detail, meticulous and accurate.Decisiveness and ability to initiate action.Good understanding and adherence to principles, values, instructions and procedures.Ability to work effectively with people.Coping with pressures and setbacks.Must be able to do repetitive work without losing focus and making mistakes.Job Qualification & Experience -Preferred Requirements:3-5 years of CNC milling experience is a requirementKnowledge Fanuc operating systems..Must be able to read and interpret technical drawings, especially tolerances and surface finishes.Own transport is a requirementWilling to work long hours/ nightshift rotation.Job Type: Full-timeExperience:CNC Turning: 3 years (Required)Ability to Commute:Bellville South, Western Cape (Required)Email Copy of CV and ID to recruitment@sppsa.co.za Subject: REF:CNC001
7h
2 - 3 years
of hands-on carpentry experience
Great hand
dexterity and an eye for detail
Excellent
understanding of carpentry techniques and methods of installation and
construction
Proficient
in using electrical and manual equipment and measurement tools (powered saws,
hammers, rulers, etc.)
Ability to
read and understand technical documents and drawings
Must follow
safety guidelines at all times
Good
knowledge of English
Good
physical condition and endurance
Ability to
work evenings, weekends, and holidays if needed.
Job Type:
Full-time and Part-timePlease email your CV to: jobs@supersonicafrica.co.za
7h
1
Our client in the manufacturing sector is looking for a Health & Safety Officer / Store Manager to join their team based in Germiston JHB.
Duties:
Developing and implementing safety policies, procedures, and guidelines in line with local laws and regulations.
Development and maintenance of guidelines to reinforce adherence to safety protocols.
Compiling all the Health and Safety Files for various sites / projects
Responsible for overseeing the development and execution of the Health and Safety Plan for each site. This entails ensuring that the plan is adequately prepared, considering all necessary safety measures and protocols.
Create a system for recording incidents as well as any safety concerns.
Develop a system for managing the documentation and keeping it up to date with site changes.
Develop and enforce a safe operation of all workplace machinery and equipment by establishing comprehensive guidelines, ensuring all equipment is used correctly, and reinforcing adherence to safety protocols.
Ensure that all tools and equipment used in the workplace are adequate and safe for use. This involves regular checks to verify that the equipment is properly maintained and in good working order.
Conduct daily site inspections on staff, and site conditions.
Checks and issuing of PPE
Keeping all the Health and Safety Files for various sites / projects up to date and relevant.
Monitor the site for compliance, as well as provide advice and guidance to the site manager.
Implement and monitor all HSE management systems on site, including, but not limited to HSE guidelines, objectives, and practices.
Keep HSE registers up to date, including renewals of permits, licenses, etc.
Compile and maintain relevant records, registers to ensure compliance for safety inspections.
Monitor all employee training certificates and arrange new training for employees with expired documents.
Monitor all employee medical certificates of fitness and arrange renewals of medicals prior to the expiry date.
Conduct in house training in the form of toolbox talks, risk assessments, HSE Plans, Fall Protection, Safe Working
Procedures, etc.
Engage with staff, contractors, and other relevant parties with respect to HSE matters related to the site.
Provide guidance and support to management and employees on safety-related matters.
Ensure employees are well-prepared and the emergency response plan is accessible and understood by all.
Coordinate emergency procedures.
Implement emergency and crisis management plans on site.
Carry out risk assessments on a continuous basis on site.
Monitor and evaluate potentially dangerous and unsafe conditions and provide recommendations.
Identify hazardous waste and disposing of it correctly.
Have first line responsibility for incident investigations, including but not limited to investigating, making initial
recommendations, and putting measures in place to prevent reoccurrence.
Assist with the rehabilitation of employee
SECTOR: Manufacturing
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93ZWJhcHAucGxhY2VtZW50cGFydG5lci5jb20vd2kvYXBwbGljYXRpb25fZm9ybS5waHA/aWQ9c3RhZmZzb2xzJnZhY2FuY3lfcmVmPVBFMDA1ODcxL0tC&jid=1795027&xid=PE005871/KB
.special-hidden
{
display: none;
}
18h
An established CMT factory in the South Coast of Durban is seeking a
Quality Assurer / Quality Controller
Minimum Requirements
1.
Matric - essential
2.
Ability to read, write &
count
3.
Good understanding and
communication of English
4.
Attention to Detail
Key Competencies
·
A Quality personnel has to
maintain a right Quality Management System to ensure quality of product;
·
Ensure that buyer’s
specifications are properly understood;
·
Ensure that Acceptable Quality
Level of the company is properly maintained & exceeded.
·
Ensure that all incoming,
in-process & final goods are properly inspected, & report any issues to
QA Supervisor / Management
·
Ensure continuous training of
personnel to enhance their skill.
·
Ensure control of repairable
& washable garments.
·
Implementation of standards for inspection
·
Following
up with the appropriate channels when mistakes are found
·
Implementation of appropriate
corrective actions
·
Communicating with other team
members to solve problems
·
Ensuring samples sent to buyers
meet specifications
Email: jobs@limcogroup.co.za
Whattsapp:
083 821 9572
v Strictly email c.v. applications only will be taken into
consideration
v No Phone Calls will be taken due to large volume of calls
v Successful applicants will be contacted telephonically for an
interview
v Salary will be based on experience and market related
1d
Our client in the Body and Trailer manufacturing industry is looking for a Branch Manager who can grow the branch capabilities as well as lead and develop their team. Related experience is essential.
1d
SUPPLY CHAIN & LOGISTICS MANAGER (AUTOMOTIVE) 12 Month Contract - R 60K - R 70K per month. Contract Supply Chain Manager urgently required for an automotive company in Pretoria for 12 month contract. R 60,000 - R 70,000 per month. Please send your CV to tinashe.hove@gmail.com or WhatsApp 069 636-8139 for consideration.They are a global leader with a commitment to innovation and excellence. They partner with leading automobile manufacturers to create cutting-edge solutions that enhance the driving experience.Key Responsibilities:● Develop and implement strategic plans for optimizing the supply chain and logistics operations, covering procurement, inventory management, transportation, and distribution.● Collaborate with cross-functional teams to forecast demand, plan production schedules, and manage inventory levels to meet customer requirements efficiently and cost-effectively.● Negotiate contracts with suppliers and third-party logistics providers, ensuring favorable terms and conditions that align with company objectives.● Monitor supplier performance through regular evaluations to maintain high standards of quality, reliability, and cost-effectiveness.Requirements:● Minimum of 7 years of experience in automotive industry supply chain management, logistics, or operations, with at least 3 years in a leadership role.● Proven track record of success in optimizing supply chain and logistics operations, improving efficiency, and reducing costs in the automotive industry.Please let me know if you would be interested in this opportunity by emailing your CV with your notice period, your current and required salary to tinashe.hove@gmail.com or whatsapp 0696368139 for consideration. Please ensure location Rosslyn, Pretoria is suitable before applying. Emails & whatsapps only. No phone calls. South African citizens only.
1d
6
We have a LARGE number of Vacancies available!
As Chicano's Customs is growing we are looking for more hands on deck to join us as we restore, build and customize classic cars.
We are looking for the following positions:
- Stripper and Fitter (automotive)
- Automotive Painter
- Driver
- Polisher (Automotive)
Please take a look at the posts above for more in depth detail about the positions available.
Please note that this does not include a full list of what the responsibilities will be (summarized)
Please also note that should we not get back to you within 1 Week consider your application unsuccessful.
Should you meet the listed requirements, please feel free to send your cv to:
Info@chicanoscustoms.com
1d
1
Our client specializes in the design and development of displays for the retail market. They are on the lookout for enthusiastic and driven Assemblers to join their team.
Minimum Requirements
• Matric (certificate will be requested)
• Minimum of 2 years’ experience in a similar position
• Experience in the Manufacturing / Engineering sector
• Ability to use tools (e.g., clamps) and machines (e.g., presses)
• Excellent hand-eye coordination and physical condition
• Bilingual (Afrikaans and English)
• Forklift License (beneficial)
Responsibilities:
• Maintains equipment and conveyors and performs basic repairs when needed
• Performs other related duties as assigned
• Read and comprehend instructions and follow established procedures
• Responsible for assembling materials using hands or tools
• Responsible for following assembly guidelines
• Inventory and manage all stock products within a warehousing environment
• Uses various machines and hand tools to accomplish assigned tasks
• Keeping a clean and tidy workspace
• Meeting all safety requirements of the company and industry
• Assembles machinery, fabricated metal products, electrical equipment, appliances, and more according to directions
• Reads blueprints, schematics, or similar documentation, then builds to those specifications
• Take precision measurements to ensure perfect fit of components
• Align material and put together parts to build more complex units
• Check output to ensure highest quality
• Maintains logs, records, and reports concerning production, machine maintenance, and product inconsistencies
• Report on issues, malfunction, or defective parts
HOW TO APPLY: Send your CV and all documents to liza-nelle@personastaff.co.za or phone 021 975 8297 for more information.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our cJob Reference #: AssemblersConsultant Name: Liza-Nelle Swanepoel
1d
1
Our client within the Manufacturing industry, based in Brackenfell, is seeking to employ an experienced Bending Operator who is available immediately.
Requirements:
• Matric Certificate
• Proven experience as a Bending Operator or similar role
• Proficiency in reading technical drawings and blueprints
• Familiarity with various bending machinery and equipment
• Strong attention to detail and commitment to producing high-quality results
• Ability to work in a fast-paced environment and meet production deadlines
• Good communication and teamwork skills
Key Responsibilities:
• Operate bending machinery to shape materials according to precise specifications
• Read and interpret technical drawings and blueprints to ensure accurate bending processes (beneficial)
• Conduct quality checks to guarantee the precision and consistency of the bent materials
• Collaborate with the production team to meet project deadlines and targets
• Perform routine maintenance on bending machines to ensure optimal functionality
HOW TO APPLY: Send your CV and all documents to liza-nelle@personastaff.co.za or phone 021 975 8297 for more information.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.Job Reference #: B/OpConsultant Name: Liza-Nelle Swanepoel
1d
1
Our client, based in Stikland, is seeking to employ Assistant Operators for a project (Contract position) that is available immediately.
If you have a matric certificate with at least one year working experience and are willing to work 12-hour shifts that include nightshifts and weekends then contact me today!
STRICT REQUIREMENTS:
• Completed Grade 12 / Matric Certificate (certificate will be requested).
• Machine operating experience.
• Welding experience (Advantageous)
• Forklift license is beneficial.
• Must be hardworking and dedicated.
• Ability and willingness to work 12-hour shifts, including nightshifts and weekends.
• Clean criminal record.
HOW TO APPLY: Send your CV and all documents to liza-nelle@personastaff.co.za or phone 021 975 8297 for more information.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act PSalary: R59 p/hJob Reference #: A/OConsultant Name: Liza-Nelle Swanepoel
1d
1
Assistant Operator
Our client is based in Stikland and they are seeking to employ Assistant Operator. Do you have a matric certificate and at least one year’s manufacturing experience?
Are you willing and able to work 12-hour shifts that include nightshifts and weekends?
STRICT REQUIREMENTS:
• Completed Grade 12 / Matric Certificate (certificate will be requested).
• Machine operating experience.
• Must be hardworking and dedicated.
• Ability and willingness to work 12-hour shifts, including nightshifts and weekends.
• Clean criminal record.
AREA: Stikland (Transport will be own responsibility)
PAY RATE: R59 per hour
APPLY: Send your CV and all documents to megan@personastaff.co.za or phone 021975 8297 for more information.
Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
Consultant Name: Megan Ockhuis
1d
Save this search and get notified
when new items are posted!