Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Results for all jobs in General Worker Jobs in Port Elizabeth
FOR THE AUTOMOTIVE INDUSTRY
Purpose:
Audit & report on quality management system & to verify that the products are manufactured to specification of the customer
Personal Specifications:
· Excellent Communication skills &
interpersonal skills
· Ability to work any shift as well as rotating
shifts & weekends
· Strong organizational & administrative
skills
· Ability to multi-task
· Strong problem solving & conflict
management skills
· Have interactive skills & be able to
perform well under pressure
· Accuracy of work with attention to detail &
neatness
· Team Player
· Must willing to work shifts & overtime
where required
· Good command of English language
Qualifications &
Experience:
· Matric Certificate
or equivalent qualification
· MINIMUM 3 years Press Shop
Supervisor / Team Leader experience
Duties &
Responsibilities:
· 12 Months production
exp in a component manufacturing plant for the automotive industry
· Conduct internal
product audits & help with customer product audit
· Ensure corrective
actions are closed off within the required time & monitor daily, plan ahead
weekly
· Ensure that
operators manufacture parts to targets set & OEE requirements
· Notifies
the Shift Manager of any Jig/Machine malfunction immediately. Has authority to
stop production in this regard
· Checks product
visually or with checking fixture & notifies Manager of any
non-conformance
· Assist with PSW to
customers if & when required
· Ensure the last off
is left in welding jig for inspection
· Ensure correct
parts get packed into correct containers
· Conducts audit on
quality management systems
· Obey company safety
rules & report anything that seems unsafe to your Manager, or Safety
Representative
· Ensure compliance
to all Environmental rules, other requirements, regulations & legal
requirements as applicable to the company
· Comply with all
Safety regulations
· Ensure housekeeping
at the end of production & at the end of the shift is done
· Keeps machine &
working area clear of unnecessary equipment
· Makes sure that bin
cards are on the Containers/Stillages
· The incumbent will
be supervised daily, must be a self-starter & have a good self-management
skill to work independently with minimum of supervision
· Some errors may be
discovered before reaching the customer & other errors may only be
discovered by the customer
· Wear safety
equipment when working in designated areas
· Maintains quality
documentation systems
· Assist to generate
work-instruction & product specification documents
· Analyses &
maintains Statistical Process Control. (S.P.C)
· Maintains audit
schedules
· Assists with
solving quality related problems & customer plants
· Assists with quality development issues
· Assist quality staff in solving quality
problems online
· Assist with compilation & maintenance of
customer product files
· Assist with FMEA &
Capability Studies
· Authorised to
prevent non-conforming products from being shipped to the customer
EMAIL CV: scorocca@gmail.com
11min
1
Overview:An exciting opportunity for a committed and dedicated professional to lead our higher certificate programme at AFDA Gqeberha Campus in 2024. The successful candidate will deliver core modules and arrange specialist discipline lectures. In the process, the candidate will prepare students to either continue their studies in the bachelor of live performance programme or to join the creative industries on an entry level. The successful candidate needs to demonstrate a willingness to embrace AFDA’s unique pedagogy which is the basis of the applied and integrated work-simulated learning environment at AFDA.Key functions:The role can be summarised as follows:Devising termly timetables, course guides, lectures and associated assessment instruments in conjunction with their AFDA counterparts on other campuses.Implementing and reviewing the above with the purpose of improvement.Responsible for teaching core modules. Will be required to identify suitable part time staff for additional teaching. Booking, briefing, managing and reviewing part time lecturing ad hoc staff.Managing the day-to-day implementation of the programme, including facilities and equipment management.Preparing budgets and overseeing the acquisition of materials and equipment required for the implementation of the programme.Adhering to the requirements of management structures that ensure the delivery and quality of the programme.Key competencies:Willingness to adapt to AFDA's curriculum, syllabus and methodologies.Adhere to and embody AFDA valuesCapacity to teachAbility to research independently and showcase research outputs Ability to work co-operatively with other teaching staffExcellent time and deadline management skillsExcellent communication skillsAdaptable to changeAdvanced computer skills, including Microsoft Office SuiteInter-personal skillsAbility to manage a budgetAbility to manage inventory of facilities and equipmentIs culturally aware and sensitive.Selection criteria:A minimum of a bachelor’s degree (honours) with a motion picture medium discipline or skill, specifically producing. An honours degree will be preferred. Established work experience in tertiary education. Industry and/or academic knowledge at an industry level. Industry and/or knowledge of the film/television and/or performance industries.Experience in the television/film and entertainment industry. AFDA employs candidates in line with the Employment Equity Act and as such preference will be given to suitably qualified candidates from designated groups. Application procedure:Applications must be submitted by email to Pamela Sehunoe Pamela@afda.co.za and Mark Wilby MarkW@afda.co.za.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMzIwXzU3MTgzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1795102&xid=1320_57183
.special-hidden
{
display: none;
}
5h
1
SUMMARY:The main goal of this position is to combine technology and design to create inviting, easy-to-use websites for consumers. This role will form part of the IT Product team and will regularly engage with teammates and clients to design, develop, test, implement and support current and future solutions. As a Front-end Developer, there will always be an expectation to help and upskill teammates, through knowledge and experience sharing. Likewise, to learn from past experiences and the knowledge of fellow teammates. PREFERRED EXPERIENCE:C#.NETBlazorMS SQL ServerAPIEntity Framework (beneficial)Azure DevOps (beneficial)Test Driven Design (beneficial)Software Architectural Design Patterns and implementation REQUIRED SKILLS:Self-Management – Applicants need to possess the drive and ability to run with the project and (From conception to user satisfaction)Technical – Experience in our core technology stack is essential, but recognise that many skills and technologies will be learnt on the wayBSc in Computer Science, Engineering or a related field.Minimum of 3 or more years of experience required ESSENTIAL FUNCTIONS:Design, develop, test and implementation of software solutionsWriting and implementing quality and high performing codeWorking with the product owner to develop the overall look and design of the productClient side development with programming languages such as BlazorProducing, maintaining and modifying the product’s look and feel to keep up to date with the latest trendsIncorporating applications, graphics, audio and video clips into the productEnsuring the product is accessible across many platforms, including laptops and smartphonesRoutinely testing websites for ease of use, speed and other quality factorsFixing any website issues or bugs that ariseMentor and train development team Please consider your application unsuccessful if you have not received a response within two weeks of applying.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzE4NTE0Ml9fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1794922&xid=1108_185142
.special-hidden
{
display: none;
}
5h
1
MAIN PURPOSE OF THE JOB:The primary purpose of this role is to be a great developer. You will form part of the Integration team and will regularly engage with your teammates and our clients to design, develop, test, implement and support the solutions that we have in place, and the solutions that we are planning to build. There will always be an expectation that you help to upskill your team-mates, through knowledge and experience sharing. And likewise, to learn from the past experiences and knowledge of your fellow teammates. PREFERRED EXPERIENCE AND QUALIFICATIONS:BSc in Computer Science, Engineering, or a related fieldMinimum of 8 or more years of experience required (kindly note that the years of experience is only a rough guideline, and the appropriate level will be ascertained during the interview process) TECHNICAL REQUIREMENTS:C#.NETMS SQL ServerWCF and Rest Web ServicesEntity Framework (beneficial)Azure DevOps (beneficial)TDD (beneficial)Software Architectural Design Patterns and implementation of suchProject and Product Management ESSENTIAL FUNCTIONS & RESPONSIBILITES:Design, develop, test and implementation of software solutions within the company.Internal and external (client) supportWriting and implementing quality and high performing codeWriting and implementing high quality unit testsDevelopment, maintenance and implementation of software tools, processes, and proceduresResearch and developmentTesting and evaluating new technologiesIdentification of improvement areasAssist with peer and code reviewsCollaboration with developers from other teams to implement the best solutions possibleHigh level of expertise required in all aspects of developmentHigh level of flexibility requiredServer UpdatesAssist with the Hiring Process Please consider your application unsuccessful if you have not received a response within two weeks of applying.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzE4NTE0M19fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1794923&xid=1108_185143
.special-hidden
{
display: none;
}
5h
1
SUMMARY: The primary purpose of this role is to be a great developer. You will form part of the Integration team and will regularly engage with your teammates and our clients to design, develop, test, implement and support the solutions that we have in place, and the solutions that we are planning to build. As a Mid-level Developer, you will be expected to upskill your team-mates, through knowledge and experience sharing. And likewise, to learn from the past experiences and knowledge of your fellow team-mates. PREFERRED EXPERIENCE AND QUALIFICATIONS:BSc in Computer Science or equivalentA minimum of 3 or more years of experience requiredStrong programming, business, and administrator know-howC#.NETMS SQL ServerWCF and Rest Web ServicesAzure DevOps (advantageous) ESSENTIAL FUNCTIONS:Design, develop, test and implementation of software solutions within the companyInternal and external (client) supportWriting and implementing quality and high performing codeDevelopment, maintenance and implementation of software tools, processes and proceduresResearch and developmentTesting and evaluating new technologiesIdentification of areas of improvementAssist with peer review and code reviewsCollaboration with developers from other teams to implement the best solutions possibleDocument software processes and solutionsFollowing strict source control procedures Please consider your application unsuccessful if you have not received a response within two weeks of applying.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzE4NTEzN19fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1794917&xid=1108_185137
.special-hidden
{
display: none;
}
5h
1
The Integration Specialist will form part of a dynamic and fast-paced team that will be responsible for building solutions based on our Company’s global application suite to meet the needs of external trading partners and internal customers. There will be a strong focus on electronic data interchange and data integration.The Integration Specialist will work closely with other members of the Integrations team, the broader IT group and other functional areas within our Organisation. These areas include Operations, Sales, Finance and external parties which include our customers and suppliers to understand the business requirements and provide the best technical solution to meet the needs within time lines and budget as defined by the business. PREFERRED QUALIFICATIONS:Bachelor’s degree in information technology or Logistics related field or equivalent experience3+ years of professional experience in common application and integration concepts, including relational databases, XML, Web Services, Electronic Data Interchange (ANSI X12, EDIFACT etc.) EXPERIENCE AND SKILLS:Experience in using no-code/low-code data mapping and transformation toolsKnowledge and experience of common application and integration concepts including relational databases, XML, Json, REST and SOAP WebServices, Electronic Data Interchange (ANSI X12, EDIFACT etc.)Ability to understand, write and run SQL QueriesKnowledge and experience of integrating disparate systems via electronic exchange of data using a variety of methodologies and communication protocols.Experience of the freight forwarding / logistics industry and processes (preferred)Detail oriented, able to multitask and meet deadlinesExcellent written and verbal skills (multi lingual a plus)Customer focusedSelf-motivated, able to work in a team and independently ESSENTIAL FUNCTIONS & RESPONSIBILITES:Understand the functional and technical capabilities of the Organisation’s global application suite to create optimized, high performing, robust solutions given the business requirements and applications involved.Translate business requirements documentation into a viable technical solution that meets the stated objectives.Ability to estimate work effort and timelines for deliverables based on business requirements, priorities and existing workloadsMaintain status of activities in the Organisation’s project tracking toolWork with cross functional groups within the organizationProduce technical documentation of all solutions deliveredSupport and enhancement of implemented solutions via the Change Management processAdhere to all published organization and safety policies and procedures as defined in theOrganisation’s Forwarding Employee Handbook Please consider your application unsuccessful if you have not received a response within two weeks of applying.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzE4NTEzMF9fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1794911&xid=1108_185130
.special-hidden
{
display: none;
}
5h
1
SUMMARY:The Solutions Architect creates the overall technical vision for a specific solution to a business problem. They design, describe, and manage the solution. The successful candidate will form part of the Contract Logistics Integration team and will be responsible for assisting the team with any complex problems. There will also be an expectation that you will help to upskill teammates, through knowledge and experience sharing. Likewise, to learn from past experiences and the knowledge of fellow teammates. PREFERRED EXPERIENCE AND QUALIFICATIONS:BSc in Computer Science, Engineering, or a related field.Minimum of 10 or more years of .NET full stack development experience and MS SQL experience.Minimum of 10 or more years of experience working with internal and external clients architecting new software products and solutions.Minimum of 5 or more years of experience in system integration and agile software development and implementation.Minimum of 5 or more years of experience in mentoring team members.Minimum of 3 or more years of experience in Azure technology.Excellent organizational skills.Excellent mentoring skills.Excellent written and verbal skills (multilingual a plus).Detail oriented, able to multitask and meet deadlines.Self-motivated, able to work in a team and independently.Working knowledge of the contract logistics industry and processes (preferred) ESSENTIAL FUNCTIONS & RESPONSIBILITES:Providing recommendations and roadmaps for proposed solutionsUnderstand the functional and technical capabilities of the products to create optimal solutions given the businessrequirements and applications involved.Providing clear communication internally and externally.Assisting clients and team members to resolve complex scenarios.Produce technical documentation of all solutions delivered.Ability to estimate work effort and timelines for deliverables based on business requirements, priorities, and existing workloads.Performing design, debug, and performance analysis on solutions.Working closely with the team to ensure that the team stays cutting edge.Reviewing and validating solutions designs from other team members.Writing testable and efficient codeProviding technical leadership and guidance.Attending training courses as requested by the Development Manager Please consider your application unsuccessful if you have not received a response within two weeks of applying.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzE4NTEzM19fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1794913&xid=1108_185133
.special-hidden
{
display: none;
}
5h
1
Qualifications and Experience National Diploma/degree in Electrical or relevant Engineering qualificationKnowledge of programming software such as PLC’s robotics, HMI and automationMust be able to take initiative and be pro-active.More than 5 years working experience in paint shop/bodyshop/assembly electrical equipment management in automotive main plant or independent experience in electrical installation and commissioning of automatic production lineFamiliar with various sensors, relay control circuits, frequency converters, electrical drawings, and soSolid professional electronic knowledge, electrical operation and maintenanceMust be familiar with programming software such as PLC, HMI and industrial Duties and Responsibilities:Responsible for the installation and commissioning of electrical equipment, PLC\HMI programming, and programming of industrial robots and the repair and maintenance of robot-related equipment.Maintenance analysis of electrical related equipment (e.g., fault analysis and resolution, measures, improvement countermeasures, effectiveness verification, ) and on-site technical supportResponsible for developing maintenance plans for electrical equipment, carrying out daily inspections, regular maintenance, regular backup procedures and parameters and other daily management tasks, as well as developing relevant technical documents such as safety operating procedures, technical standards and operating instructions.Develop a plan for electrical spare parts and keep abreast of the stock situation to ensure a safe stock of electrical spareResponsible for the review of electrical design drawings and filing of technicalEnsure construction quality and compliance according to governmentIdentify problems, snag list and ensure quality snag close-out.Sign-off and handover of constructionResponsible for the health and safety of subordinates and safety compliance ofRisk assessment development for Paint shopTraining of production and new maintenance staff on all Paint shop production lines risks and safe
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzE4NDgwNl9fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1794448&xid=1108_184806
.special-hidden
{
display: none;
}
6h
1
Instructional Offerings:• Mathematics N3.• Engineering Mathematics N4 – N6.• Engineering Science N3 – N4.• Engineering Drawing N3.• Industrial Electronics N3 – N4• Electrotechnics N3 – N4• Mechanical Draughting N4.• Power Machines N5 – N6.Requirements:• National Diploma/Bachelor’s degree in manufacturing, Electrical or Mechanical Engineering.• A minimum of 1 year of relevant, lecturing/industry experience.• Management and Teaching in the tertiary environment (preferably FET College)• Computer literacy is essential, especially in MS Outlook, MS Word, and MS Excel.• Curriculum and assessment knowledge.• Demonstrate a history of student throughput, pass rate, and understanding.Duties and responsibilitiesTutors are responsible for leading one-on-one or small group lessons that cater to the needs and goals of their students. This position entails the following responsibilities:• Offer academic and educational leadership.• Assisting students with homework, test preparation, papers, and other academic tasks.• Working with students to help them understand key concepts, especially those learned in the classroom.• Participate in and manage all other related teaching responsibilities.• Teaching skills to improve academic performance, including study strategies, note-taking skills, and approaches to answering test questions• Developing and distributing teaching materials to supplement classroom lessons, including study guides• Conducting practice tests to track progress, identify areas of improvement, and help set goals for examination preparation.• Providing positive and constructive feedback to students• Building meaningful connections with students from diverse backgrounds.• Diagnosing student needs through active listening techniques and questioning strategies• Recognizing different learning styles and student preferences.• Designing differentiated learning goals.• Staying up to date with the NATED curriculum.Skills:• An in-depth understanding of a specific academic topic or significant test preparation experience. • Strong communication skills to explain challenging concepts, give instructions, and provide feedback clearly. • Effective goal-setting strategies for motivating and encouraging students to improve their academic performance • Flexible and creative learning approach to tailor learning to individual students. • A patient and compassionate attitude towards students as they develop skills and improve their performance. • Demonstrated academic excellence.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzE4NDU3MV9fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1793959&xid=1108_184571
.special-hidden
{
display: none;
}
7h
1
We are looking for an experienced Master Technician!Requirements:Must be willing to relocate to Port Elizabeth or currently be residing in the area.All applications must be accompanied by your brand diagnostic / master technician certificationMake sure references are contactableClear CRIM and ITCValid Drivers licenseSupply current pay slips qualificationsSupply updated, completed CVPlease note your full name, surname and diagnostic or master tech as reference
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzE4NDU2MV9fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1793949&xid=1108_184561
.special-hidden
{
display: none;
}
7h
1
Tasks: Coordination of deliveries of spares to internal / external customers.To ensure and carry out Inspection of Incoming Deliveries for spares.To continually review and report on shipment statusTo carry out inspection on incoming deliveries for sparesGRV of stock for all projects and 2 departmentsCreate Picking List for receiving clerk to draw stock.Create delivery note and notify Spares of delivery going out for invoice to be processed.Responsible for operating and controlling the stores area including day-to-day management of all incoming and outgoing goods.Tracking of Spares shipments with Forwarder, completing clearing instruction and sharing shipping updates with the team.Ensure customer deliveries are made in a timely manner.Ensure signed POD’s are loaded and linked electronically to SAP.Closing off workflows ad forwarding to responsible person for shipping invoicesAd hoc requests from internal support and Managing Director Skills: MatricFurther studies advantageous in correct field for positionAttention to detail.Basic background in accounting essentialAbility to work individually and form part of a team.SAP experience advantageousMust be able to solve queries via investigating of process taken.Ms Office – Outlook, Excel, and WordExcellent Organisational skills and communication skillsDriver’s License essential
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzE4NzMyMl9fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1791714&xid=1109_187322
.special-hidden
{
display: none;
}
8h
1
CODE 10 DRIVER WITH PDP TO BE BASED IN PORT ELIZABETH DEAL PARTY. Applicants residing in the area or close to Deal Party will be preferredMINIMUM REQUIREMENTSValid Code 10 license with PDPMinimum of 2 years hands-on driving experience of 4 to 8 ton vehicles with a gross vehicle mass of between a 1000kg and 16000kg.Physically fit and able to lift heavy goods of up to 25kg per box.Physically fit to handle picking, loading, offloading of vehicle.Ability to Read, write, count, calculateNeat and presentable as the driver is the ambassador of the Company and has to interact and communicate with customers and staff alikeResponsible as the driver is responsible for all the stock in the truck, money being collected, cashing up, general assistant and need to conduct himself in a professional mannerFMCG/Wholesale/Retail/Catering experience in handling food itemsHygiene and safety consciousHardworking, honest and reliable and of sober habitsKnowledge of Port Elizabeth and surrounding including Kenton, Alexandria, Garden route and Inland Graaf Reinett, Cradock, Middelburg etc.Forklift Driving experience added advantageSalary - Market Related + monthly performance based bonusAPPLICATION PROCESS:
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzE4NjgwMl9fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1789992&xid=1109_186802
.special-hidden
{
display: none;
}
8h
Vinyl Applicator with at least 2 years experience is required. Traceable References essential. Signage Experience essential. Candidate must be willing to come for an interview and will be asked to demonstrate their abilities with vinyl.Only applications with a full CV will be considered.
20h
1
Job Position: Legal Secretary
Ref: 4668
Location: PE / Gqeberha
Salary: R15 000 to R30 000 per month commensurate with qualification and experience
Hours: 8 AM to 4.30 PM weekdays
On occasion, may be required to work overtime after hours or on weekends
Starting date: 2nd May 2024
Email your updated CV to recruit@onlinepersonnel.co.za
Qualifications / Requirements:
• Must be computer literate
• Minimum of 5 years Legal Secretary experience highly advantageous
• Enabled Typist
• Ability to administer the office
• Software packages worked on:
- MS Outlook
- MS Word
- MS Excel
- Olympus Dictation
• Experience with:
- Typing of various documents such as affidavits, heads of argument, letters, opinions etc
- Office administration
- Management of the practice
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18yMzIzXzkxODVfXzQ5Nz91dG1fc291cmNlPWd1bXRyZWUmdXRtX21lZGl1bT1mZWVkJmtleXdvcmQ9&jid=1794343&xid=2323_9185
.special-hidden
{
display: none;
}
2d
1
The ideal candidate will promote and market the business and all its products to prospective customers both locally and in nearby regions.KEY PERFORMANCE AREAS: Focal points will be targeting car washes/valets, Laundries and Resellers all the way from Port Elizabeth as far as East London and George or further.Establish, develop and maintain positive business and customer relationships.Reach out to customer leads through cold calling daily.Expedite the resolution of customer problems and complaints to maximize satisfactionAchieve agreed upon sales targets and outcomes within schedule.Coordinate sales effort with team members and other departments.Analyze the territory/market’s potential, track sales and status reports.Supply management with reports on customer needs, problems, interests, competitive activities, and potential for new products and services.Keep abreast of best practices and promotional trends.Continuously improve through client feedback.Other duties – Perform other duties as may be assigned by higher authority.Sales Software – Daily updating of sales activities on Skynamo.Please note: 2-3 Years relevant sales experience, in the cleaning field, as well as own transport, will be beneficial. Please consider your application unsuccessful should you not receive a response within 2 weeks of applying.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzkxMDkzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1228662&xid=1109_91093
.special-hidden
{
display: none;
}
2y
1
Our client is looking for an experienced FMCG Sales Representative based in Port Elizabeth. MINIMUM REQUIREMENTS: Grade 12 / MatricValid driver’s licenseExperience in FMCG salesExperience in hygiene would be highly advantageous.Experience in new business development / cold calling. KEY PERFORMANCE AREAS: New business development / cold calling.Source leads and convert to closed sales deals.Quote for business opportunities.Maintain a regular call cycle with clients.Meet client deadlines.Compile and submission of reports according to the pre-determined deadlines / dates.Meet and exceed sales targets.Demonstration of products. Please note: Should you not be contacted within 2 weeks after applying, please consider your application as unsuccessful.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzY3ODE5X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1167192&xid=1109_67819
.special-hidden
{
display: none;
}
2y
1
Our national client is looking for a dynamic Internal Sales Representative to join their successful company.The successful candidate will be responsible for selling financial services (Debt Collection Services), within the medical sector. Requirements: Must have an understanding of medical tariff codes and invoicing with medical aids.Strong administration skillsPrevious marketing or sales experience in a similar role highly advantageousKnowledge on medical practice management or financial services will be advantageousExcellent selling, communication, negotiating and relationship mangement skillsPrioritization, time management and organisational skillsAbility to deliver presentations tailored to the audience needs.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzY4MDczX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1168121&xid=1109_68073
.special-hidden
{
display: none;
}
2y
1
Our client based in Deal Party, Port Elizabeth is seeking to employ a young, recently qualified Junior Software Developer. An awesome career opportunity awaits - don''t miss out. Requirements include but not limited to:Relevant tertiary qualification; viz. degree or diplomaAndroid background preferableExperience in : PhP 5 ,7MySQLHtmlJavascript / JQueryBasic linux backgroundThe following not mandatory : Mobile dev for AndroidYii frameworkOther : Good organization skillsMust be able to work under pressureWill be mainly responsible for maintenance on current system, and adding limited new functionalityCandidate will be exposed to mobile development at a later stage. Permanent position with a minimum of 3 months probation period.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzY3NzMwX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1167147&xid=1109_67730
.special-hidden
{
display: none;
}
2y
1
Our client has a position available for an Account in their company, based in Coega, Port Elizabeth. The main purpose of this position is to handle, prepare, compute, manage, research, and analyze all accounting data, to provide quantitative information on performance, financial position, solvency, liquidity and cash flows of the business. Requirements: Matric or equivalent.Tertiary qualification (advantageous).Minimum 3 - 5 years’ experience.SAICA (advantageous).Citrus experience Advantageous.Exposure to and understanding of implementation of OHSAS.Microsoft Office Packages.High Attention to Detail.Organization Skills.Ability to work under pressure.Deadline Driven.Above average communication levels.Excellent report writing skills. Responsibilities: Finance:Reconcile Inventory control by comparing the inventory account.Capture all the inventories in the system.Develop Inventory journal entry to document inventory transactions.Check the inventory sheet of goods received and stock issue notes.Responsible for matching invoices to statements.Reviewing of incoming post.Matching purchasing orders to supplier invoices received.Review payments to suppliers/creditors and loaded batches for payments.Evaluate rates and taxes.Maintain asset register.Accounts Recon:Reviewing creditor recons performed monthly.Expense claim reconciliation and payment.Reviewing weekly producer statement. Accounting:Monthly Nominal Ledger Capture and Trial Balance preparation.Fixed Assets:Maintaining Fixed Asset Register.Depreciation calculation and journal entries.Banking:Authorization of payments (one of dual signing).Load all bank payments.Monthly debit order check.Vat Returns:Complete and submit VAT return. If you are not contacted within two weeks of applying, please consider your application unsuccessful.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzQ4OTM4X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1174629&xid=1108_48938
.special-hidden
{
display: none;
}
2y
1
Job Position: Sales Representative (FMCG)
Ref: 4666
Location: PE / Gqeberha
Salary: R12 000 per month commensurate with qualification and experience + commission, company car and petrol card
Email your CV to recruit@onlinepersonnel.co.za
Qualifications / Requirements:
• Matric certificate
• Minimum 3 to 5 years experience as a Sales Rep
• Experience in FMCG will be advantageous
• Highly self-motivated, energetic and the ability to motivate others
• Ability to interact and communicate on all levels
• Strong planning and organisational skills
• Customer orientated
• Honest and trustworthy
• Good, sound, reliable track record
• Ability to be assertive and high level of integrity
• Willingness to work overtime when required
• Willingness to travel out of town
• Valid driver’s license essential
• Fully computer literate in Outlook (email) Excel (spreadsheets) and Word
• Smart mobile phone with good camera and email functionality in good working order
Key Performance Areas:
• Responsible for driving sales and placing orders for designated stores as per route schedule
• Complete “fill in orders” as may be required
• Floor-walk to be undertaken during call on store
• Display building and acquiring additional display areas and price flashers
• Control stock rotation ie. short-dated and expired stock
• Negotiate with Store Manager regarding advertised products and promotions and additional space and display areas
• Control and manage shelf pricing, pricing flashers, product flows and maximize forward shares for all Principles in stores
• Complete all required Principal report forms and trackers when requested
• Complete weekly price surveys
• Motivate and manage the Merchandisers in your assigned stores, ensuring they are implementing the requirements of their positions in stores
• Responsible for submitting photos of all areas of activity when necessary
• Responsible for attending to returns within the store
• Attend Monday morning meetings at the office
• Ensure stores are fully stocked at all times
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18yMzIzXzkxNjRfXzQ5Nz91dG1fc291cmNlPWd1bXRyZWUmdXRtX21lZGl1bT1mZWVkJmtleXdvcmQ9&jid=1794191&xid=2323_9164
.special-hidden
{
display: none;
}
3d
Save this search and get notified
when new items are posted!