M c motors Ads | Gumtree Classifieds South Africa

Clear All

Results for m c motors in "m c motors" in South Africa in South Africa

DAB grinder FX submersible pump 1.1kW single phase

R 31,659.01

Save

Please note that shipping and installation is not included.DAB grinder FX submersible pump 1.1kW single phase with a shredder designed for lifting and transferring wastewater in civil and commercial environments. Grinder FX is certified EN 12050-1.The presence of the shredder makes the pump suitable for systems with small diameter pipes or those requiring high pressures. Shredder in AISI 630 stainless steel. Ideal pump for replacements thanks to its reduced dimensions and to both flanged and threaded delivery ports. Technical Data of the DAB grinder FX submersible pump 1.1kW single phase Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies Construction features of the pump: Pump body and impeller in cast iron, shredder in AISI 630. Motor shaft in AISI 304 stainless steel. Double mechanical seal in SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid, independent of the direction of rotation. Delivery port both flanged and threaded. Construction features of the motor: Single-phase asynchronous motor (MA / MNA versions) and three-phase version motor (TNA versions). The rotor is mounted on lubricated bearings. Continuous operation in S1 with the motor completely immersed.Dry running for a maximum time of 10 minutes. Over-temperature sensors in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase versions with starter and capacitor in a separate panel, MA versions with float for automatic operation. In the three-phase motors the over-temperature sensor connection is responsibility of the user.

Mbombela / Nelspruit

DAB grinder FX submersible pump 1.5kW single phase

R 34,823

Save

Please note that shipping and installation is not included.DAB grinder FX submersible pump 1.5kW single phase with a shredder designed for lifting and transferring wastewater in civil and commercial environments. Grinder FX is certified EN 12050-1.The presence of the shredder makes the pump suitable for systems with small diameter pipes or those requiring high pressures. Shredder in AISI 630 stainless steel. Ideal pump for replacements thanks to its reduced dimensions and to both flanged and threaded delivery ports. Technical Data of the DAB grinder FX submersible pump 1.5kW single phase Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies Construction features of the pump: Pump body and impeller in cast iron, shredder in AISI 630. Motor shaft in AISI 304 stainless steel. Double mechanical seal in SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid, independent of the direction of rotation. Delivery port both flanged and threaded. Construction features of the motor: Single-phase asynchronous motor (MA / MNA versions) and three-phase version motor (TNA versions). The rotor is mounted on lubricated bearings. Continuous operation in S1 with the motor completely immersed. Dry running for a maximum time of 10 minutes.Over-temperature sensors in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase versions with starter and capacitor in a separate panel, MA versions with float for automatic operation. In the three-phase motors the over-temperature sensor connection is responsibility of the user.

Mbombela / Nelspruit

DAB grinder FX submersible pump 0.7kW single phase

R 28,495

Save

Please note that shipping and installation is not included.DAB grinder FX submersible pump 0.7kW single phase with a shredder designed for lifting and transferring wastewater in civil and commercial environments. Grinder FX is certified EN 12050-1.The presence of the shredder makes the pump suitable for systems with small diameter pipes or those requiring high pressures. Shredder in AISI 630 stainless steel. Ideal pump for replacements thanks to its reduced dimensions and to both flanged and threaded delivery ports. Technical Data of the DAB grinder FX submersible pump 0.7kW single phase Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 \ ATEXSpecial versions on request: different cable lengths, different voltages and frequencies Construction features of the pumpPump body and impeller in cast iron, shredder in AISI 630. Motor shaft in AISI 304 stainless steel. Double mechanical seal in SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid, independent of the direction of rotation. Delivery port both flanged and threaded. Construction features of the motorSingle-phase asynchronous motor (MA / MNA versions) and three-phase version motor (TNA versions). The rotor is mounted on lubricated bearings. Continuous operation in S1 with the motor completely immersed. Dry running for a maximum time of 10 minutes. Over-temperature sensors in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase versions with starter and capacitor in a separate panel, MA versions with float for automatic operation. In the three-phase motors the over-temperature sensor connection is responsibility of the user.

Mbombela / Nelspruit

DAB grinder FX submersible pump 1.1kW three phase

R 30,389

Save

Please note that shipping and installation is not included.DAB grinder FX submersible pump 1.1kW three phase with a shredder designed for lifting and transferring wastewater in civil and commercial environments. Grinder FX is certified EN 12050-1.The presence of the shredder makes the pump suitable for systems with small diameter pipes or those requiring high pressures. Shredder in AISI 630 stainless steel. Ideal pump for replacements thanks to its reduced dimensions and to both flanged and threaded delivery ports. Technical Data of the DAB grinder FX submersible pump 1.1kW three phase Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies Construction features of the pump: Pump body and impeller in cast iron, shredder in AISI 630. Motor shaft in AISI 304 stainless steel. Double mechanical seal in SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid, independent of the direction of rotation. Delivery port both flanged and threaded.Construction features of the motor: Single-phase asynchronous motor (MA / MNA versions) and three-phase version motor (TNA versions). The rotor is mounted on lubricated bearings. Continuous operation in S1 with the motor completely immersed. Dry running for a maximum time of 10 minutes. Over-temperature sensors in the motor windings with intervention threshold at +130°C.Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase: versions with starter and capacitor in a separate panel, MA versions with float for automatic operation. In the three-phase motors the over-temperature sensor connection is responsibility of the user.

Mbombela / Nelspruit

DAB grinder FX submersible pump 0.7kW three phase

R 27,226

Save

Please note that shipping and installation is not included.DAB grinder FX submersible pump 0.7kW three phase with a shredder designed for lifting and transferring wastewater in civil and commercial environments. Grinder FX is certified EN 12050-1. The presence of the shredder makes the pump suitable for systems with small diameter pipes or those requiring high pressures. Shredder in AISI 630 stainless steel. Ideal pump for replacements thanks to its reduced dimensions and to both flanged and threaded delivery ports. Technical Data of the DAB grinder FX submersible pump 0.7kW three phase Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies Construction features of the pump: Pump body and impeller in cast iron, shredder in AISI 630. Motor shaft in AISI 304 stainless steel. Double mechanical seal in SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid, independent of the direction of rotation. Delivery port both flanged and threaded.Construction features of the motor: Single-phase asynchronous motor (MA / MNA versions) and three-phase version motor (TNA versions). The rotor is mounted on lubricated bearings. Continuous operation in S1 with the motor completely immersed. Dry running for a maximum time of 10 minutes. Over-temperature sensors in the motor windings with intervention threshold at +130°C.Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase: versions with starter and capacitor in a separate panel, MA versions with float for automatic operation. In the three-phase motors the over-temperature sensor connection is responsibility of the user.

Mbombela / Nelspruit

DAB grinder FX submersible pump 2.2kW three phase

R 36,071

Save

Please note that shipping and installation is not included.DAB grinder FX submersible pump 2.2kW three phase with a shredder designed for lifting and transferring wastewater in civil and commercial environments. Grinder FX is certified EN 12050-1. The presence of the shredder makes the pump suitable for systems with small diameter pipes or those requiring high pressures. Shredder in AISI 630 stainless steel. Ideal pump for replacements thanks to its reduced dimensions and to both flanged and threaded delivery ports. Technical Data of the DAB grinder FX submersible pump 2.2kW three phase Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies Construction features of the pump: Pump body and impeller in cast iron, shredder in AISI 630. Motor shaft in AISI 304 stainless steel. Double mechanical seal in SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid, independent of the direction of rotation. Delivery port both flanged and threaded.Construction features of the motor: Single-phase asynchronous motor (MA / MNA versions) and three-phase version motor (TNA versions). The rotor is mounted on lubricated bearings. Continuous operation in S1 with the motor completely immersed. Dry running for a maximum time of 10 minutes. Over-temperature sensors in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase versions with starter and capacitor in a separate panel, MA versions with float for automatic operation. In the three-phase motors the over-temperature sensor connection is responsibility of the user.

Mbombela / Nelspruit

DAB grinder FX submersible pump 1.5 kW three phase

R 32,907

Save

Please note that shipping and installation is not included.DAB grinder FX submersible pump 1.5kW three phase with a shredder designed for lifting and transferring wastewater in civil and commercial environments. Grinder FX is certified EN 12050-1. The presence of the shredder makes the pump suitable for systems with small diameter pipes or those requiring high pressures. Shredder in AISI 630 stainless steel. Ideal pump for replacements thanks to its reduced dimensions and to both flanged and threaded delivery ports.Technical Data of the DAB grinder FX submersible pump 1.5kW three phaseFlow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies Construction features of the pump: Pump body and impeller in cast iron, shredder in AISI 630. Motor shaft in AISI 304 stainless steel. Double mechanical seal in SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid, independent of the direction of rotation. Delivery port both flanged and threaded.Construction features of the motor: Single-phase asynchronous motor (MA / MNA versions) and three-phase version motor (TNA versions). The rotor is mounted on lubricated bearings. Continuous operation in S1 with the motor completely immersed. Dry running for a maximum time of 10 minutes. Over-temperature sensors in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase versions with starter and capacitor in a separate panel, MA versions with float for automatic operation. In the three-phase motors the over-temperature sensor connection is responsibility of the user.

Mbombela / Nelspruit