Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Suggested
Results for job vacancies in Jobs in Uitenhage
1
Applications are invited from suitably qualified and experienced employees to fill the above vacancy in the Component Engineering and Test department based in Uitenhage.Job Description and Responsibilities Responsibility for the design, development and release of chassis components for the Vivo platform, including Sub-Saharan Africa (SSA) requirements.The resolution of design related problems on manufactured platforms (ability to problem solve complex components).Supporting local, SSA and European supplier base with manufacturing and process improvement recommendations, thereby ensuring integrity of parts supplied.Project management of components under your responsibility, ensuring that chassis components are timeously introduced into production within the specified time and cost parameters.Preparing technical feasibility studies, cost analysis of components, systems and projects.Creating and tracking development timing plans.Evaluation and implementation of the Group design changes.Maintenance of Technical Data Systems for chassis components.Assist with line and quality problems, special investigations, etc.Evaluation and implementation of Product cost optimizations.Education and Experience National Diploma Mechanical Engineering / B-Tech Mechanical Engineering / BSc Mechanical EngineeringMinimum 5 years relative experience in the field.Knowledge of modern Chassis components and systems.Knowledge of modern automotive production methods. • Knowledge of project management principles.Understanding of basic financial principles.Skills, Attributes & Other requirements The ability to conduct Technical Presentations.The ability to work and communicate effectively with people at all levels.MS Office computer literacy.08 Drivers License.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzYzNjE3X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1224122&xid=1108_63617
.special-hidden
{
display: none;
}
2y
1
Applications are invited from suitably qualified & experienced employees to fill the above vacancy in Production – Final Assembly Job Description and ResponsibilitiesFor Bolting related changes (new model introduction, PDM Changes, etc.), update TORIS Matrices (Torque parameters per fastening of bolts) and ensure TORIS daily sample adherence to Group Standard. Liaise with relevant stakeholders to ensure that Process documentation such as Control Plans, MAC and SOS Sheets are maintained/updated regularly and that the Bolting problems are sufficiently addressed.Continuously monitor, update and calibrate Electronic Torque Transducers and DataMyte to ensure conformance to quality standards. Ensure proper protection of equipment to avoid damages and scratches.For proper analysis and feedback on TORIS Inspection data, ensure consistent downloading of Torque data from DataMyte onto computer through SPC Management software.Perform Annual review of TORIS Torque Verification Specifications to ensure the set-up specification stays relevant.For samples found to be out of specification, ensure that the necessary verification processes are followed by TORIS Inspectors that Production is informed of non-conformance and that actions are taken to address the risk. Where A & B Category Bolts are not performed with Smart Tools, ensure that the necessary controls are put in place to ensure adherence to Quality Requirements.Coordinate Bolting parameter changes on Torque Controllers in Final Assembly, document changes according to appropriate Quality Managements System requirements and ensure communication to all relevant stakeholders.Update Bolting Work Instructions, review FIS-eQS Bolting descriptions and Bolting Reports.Ensure continuous improvement of Bolting Processes, compliance to VW Bolting Standards and adherence to Bolting KPI’s. Form part of team for Audit Preparations; accompany auditors when requested and action Bolting relating findingsEducation and ExperienceA National Diploma/ Degree in Mechanical / MechatronicsMinimum 5 years’ experience in manufacturing industry.Experience in a maintenance / production environment.Skills, Attributes & Other requirementsESSENTIAL:Be proficient in MS Office, specifically MS Excel.Have a sound knowledge of SQL, with the ability to construct and write queries against various databases.Have a strong analytical and problem solving abilityHave knowledge of the companies processes, of Material properties, Tensile Strength and Hardness that can affect Bolting applications.Have good communication, presentation skills and be a strong team player.PREFERRED:Basic knowledge of the DAR system would be an advantage.Basic knowledge of the German language would be an added advantage Please forward CV and ALL supporting documentation to, recruiter@profilepersonnel.co.za. Should you not hear from Profile Personnel within 14 days please consider your application unsuccessful for the vacancy. Please note all applications will automaticall
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQ1NjAzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1168364&xid=1266_45603
.special-hidden
{
display: none;
}
2y
1
Applications are invited from suitably qualified & experienced employees to fill the above vacancy in Production – Final Assembly Job Description and ResponsibilitiesFor Bolting related changes (new model introduction, PDM Changes, etc.), update TORIS Matrices (Torque parameters per fastening of bolts) and ensure TORIS daily sample adherence to Group Standard. Liaise with relevant stakeholders to ensure that Process documentation such as Control Plans, MAC and SOS Sheets are maintained/updated regularly and that the Bolting problems are sufficiently addressed.Continuously monitor, update and calibrate Electronic Torque Transducers and DataMyte to ensure conformance to quality standards. Ensure proper protection of equipment to avoid damages and scratches.For proper analysis and feedback on TORIS Inspection data, ensure consistent downloading of Torque data from DataMyte onto computer through SPC Management software.Perform Annual review of TORIS Torque Verification Specifications to ensure the set-up specification stays relevant.For samples found to be out of specification, ensure that the necessary verification processes are followed by TORIS Inspectors that Production is informed of non-conformance and that actions are taken to address the risk. Where A & B Category Bolts are not performed with Smart Tools, ensure that the necessary controls are put in place to ensure adherence to Quality Requirements.Coordinate Bolting parameter changes on Torque Controllers in Final Assembly, document changes according to appropriate Quality Managements System requirements and ensure communication to all relevant stakeholders.Update Bolting Work Instructions, review FIS-eQS Bolting descriptions and Bolting Reports.Ensure continuous improvement of Bolting Processes, compliance to VW Bolting Standards and adherence to Bolting KPI’s. Form part of team for Audit Preparations; accompany auditors when requested and action Bolting relating findingsEducation and ExperienceA National Diploma/ Degree in Mechanical / MechatronicsMinimum 5 years’ experience in manufacturing industry.Experience in a maintenance / production environment.Skills, Attributes & Other requirementsESSENTIAL:Be proficient in MS Office, specifically MS Excel.Have a sound knowledge of SQL, with the ability to construct and write queries against various databases.Have a strong analytical and problem solving abilityHave knowledge of the companies processes, of Material properties, Tensile Strength and Hardness that can affect Bolting applications.Have good communication, presentation skills and be a strong team player.PREFERRED:Basic knowledge of the DAR system would be an advantage.Basic knowledge of the German language would be an added advantage Please forward CV and ALL supporting documentation to, recruiter@profilepersonnel.co.za. Should you not hear from Profile Personnel within 14 days please consider your application unsuccessful for the vacancy. Please note all applications will automaticall
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQ4Mjk5X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1182875&xid=1266_48299
.special-hidden
{
display: none;
}
2y
Ads in other locations
1
The successful candidate will be working closely with both the Production and Supply Chain Department. This role will be reporting to the Supply Chain Department.The current scope of work is as follows:Dealing with routings / work planChecking customer requirementsCreating a production plan for the week and daily follow-upsMaintaining and updating plan according the customer changesWorking with the BOE and requesting stock levels from the Material Planner to ensure that there are no shortagesCommunicate all raw material shortages to SCM / OPSCommunicate all changes in the production plan to the Production teamMonitoring and adjusting of Forcam systemQualificationsMechanical Engineering Diploma Experience5 – 10 years’ experience in Supply Chain1-5 years’ experience in in series production for AutomotiveSkills and AbilitiesComputer literacyMS OfficeSAP knowledgeCommunication at all levelsPlanning and organizingAdaptabilityAttention to detailAccuracyAnalysis / problem identificationCustomer service orientationInitiativeJudgement / problem solvingTeamwork / collaborationTolerance for stressThe SAP (PP) knowledge is as follows:Handling of COGI’sPSA / BDE stations queriesWorking with the MRP systemMaintain Master Data integrityPlease forward CV and ALL supporting documentation to, recruiter@profilepersonnel.co.za.Should you not hear from Profile Personnel within 14 days please consider your application unsuccessful for the vacancy. Please note all applications will automatically be added to our database for future vacancies.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzUxMjc4X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1193308&xid=1266_51278
.special-hidden
{
display: none;
}
2y
1
Main Purpose:
To sell policies, recruit, develop and train representatives to achieve the set targetTo be developed into a Sales Manager when vacancies are available (Key Individual)
- 1 year ProgrammeCourses- Full-Time Academic School: 0 – 1 month- Commissions and Finance- Compliance- Reports- Practical School (2 – 12 months)- COB Long term and Investments- CPD- Supervision (FSP 4.1);- Recruitment process orientation (On-Boarding)- MS Office (Spread over 12 months – if necessary)- Digital training- Sales reports Orientation- Sales performance management orientation- Disciplinary action
Requirements
Formal Education
• Matric• Relevant Full Qualification as per the FSCA Board Notice
Technical/Legal Certification
• Registered as an Employee Representative (FSCA)• Regulatory Examination Level 1: Representatives (RE5)• Regulatory Examination Level 1: Key Individuals (RE1)• Class of Business: Long Term Insurance & Investment (Advantage)• Updated CPD points
Experience
• 2 Years’ Experience in the Insurance Industry• Experience in Category A, B1, B2, C and Retail Benefits• Fit and Proper Rep for all Tier 1 products • Fit and Proper Rep for all Tier 2 products
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zMzA2NDQzODU4P3NvdXJjZT1ndW10cmVl&jid=1490664&xid=3306443858
.special-hidden
{
display: none;
}
13h
1
Calling all Senior Sales Development Consultants in Mthatha (Eastern Cape)
The successful candidate will sell policies, recruit, develop and train representatives to achieve set targets, and to ultimately be developed into a sales Manager when vacancies are available (Key Individual)
1-year Programme
Courses
- Full-Time Academic School: 0 – 1 month
- Commissions and Finance
- Compliance
- Reports
- Practical School (2 – 12 months)
- COB Long term and Investments
- CPD
- Supervision (FSP 4.1).
- Recruitment process orientation (On-Boarding)
- MS Office (Spread over 12 months – if necessary)
- Digital training
- Sales reports Orientation
- Sales performance management orientation
- Disciplinary action
Formal Educational requirements
MatricRelevant Full Qualification as per the FSCA Board Notice
Technical/Legal Certification
Registered as an Employee Representative (FSCA)Regulatory Examination Level 1: Representatives (RE5)Regulatory Examination Level 1: Key Individuals (RE1)Class of Business: Long Term Insurance & Investment (Advantage)Updated CPD points
Experience (Not Negotiable)
2 Years’ Experience in the Insurance IndustryExperience in Category A, B1, B2, C and Retail BenefitsFit and Proper Rep for all Tier 1 productsFit and Proper Rep for all Tier 2 products
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zMjcyMjQyODA5P3NvdXJjZT1ndW10cmVl&jid=1426233&xid=3272242809
.special-hidden
{
display: none;
}
13h
5
We have a vacancy for Installation Technicians or installers to work on Access Control, CCTV & Fire Detection Systems in the Knysna and George Areas. You must be able to work with hand and power tools to install cable, equipment and conduit. We are well established within the industry and this might just be the opportunity that you have been waiting for.
Minimum of 2 years experience as a technician or installer is required. You must be able to work with your hands and do quality installations. Responsibility:You have to live in Knysna or George Areas to apply for this position as you will work in these areas mostly.
In return for your commitment and dedication we offer:
• On the job training and skills development
• Market related Salary
Please apply by e-mailing a detailed professional CV with references and a recent colour photo to: hr@integratek.co.za
You have to live in the George and Knysna Areas to apply for this position as you will work in these areas mostly. Please do not reply if you live outside these areas.
You have to be a SA citizen with a SA ID and NO criminal record.
If you do not hear from us within 2-3 weeks please consider your application unsuccessful.
Job Reference #: KnysnaTechs
13h
1
Main Purpose:
To sell policies, recruit, develop and train representatives to achieve the set targetsTo be developed into a Sales Manager when vacancies become available (Key Individual)
- 1 year ProgrammeCourses- Full-Time Academic School: 0 – 1 month- Commissions and Finance- Compliance- Reports- Practical School (2 – 12 months)- COB Long term and Investments- CPD- Supervision (FSP 4.1);- Recruitment process orientation (On-Boarding)- MS Office (Spread over 12 months – if necessary)- Digital training- Sales reports Orientation- Sales performance management orientation- Disciplinary action
Requirements
Formal Education
• Matric• Relevant Full Qualification as per the FSCA Board Notice
Technical/Legal Certification
• Registered as an Employee Representative (FSCA)• Regulatory Examination Level 1: Representatives (RE5)• Regulatory Examination Level 1: Key Individuals (RE1)• Class of Business: Long Term Insurance & Investment (Advantage)• Updated CPD points
Experience
• 2 Years’ Experience in the Insurance Industry• Experience in Category A, B1, B2, C and Retail Benefits• Fit and Proper Rep for all Tier 1 products • Fit and Proper Rep for all Tier 2 products
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yNzE1MzY4MzkwP3NvdXJjZT1ndW10cmVl&jid=1497784&xid=2715368390
.special-hidden
{
display: none;
}
14h
1
Main Purpose:
To sell policies, recruit, develop and train representatives to achieve the set targetTo be developed into a Sales Manager when vacancies are available (Key Individual)
- 1 year ProgrammeCourses- Full-Time Academic School: 0 – 1 month- Commissions and Finance- Compliance- Reports- Practical School (2 – 12 months)- COB Long term and Investments- CPD- Supervision (FSP 4.1);- Recruitment process orientation (On-Boarding)- MS Office (Spread over 12 months – if necessary)- Digital training- Sales reports Orientation- Sales performance management orientation- Disciplinary action
Requirements
Formal Education
• Matric• Relevant Full Qualification as per the FSCA Board Notice
Technical/Legal Certification
• Registered as an Employee Representative (FSCA)• Regulatory Examination Level 1: Representatives (RE5)• Regulatory Examination Level 1: Key Individuals (RE1)• Class of Business: Long Term Insurance & Investment (Advantage)• Updated CPD points
Experience
• 2 Years’ Experience in the Insurance Industry• Experience in Category A, B1, B2, C and Retail Benefits• Fit and Proper Rep for all Tier 1 products • Fit and Proper Rep for all Tier 2 products
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS84NjU3NDQzNTY/c291cmNlPWd1bXRyZWU=&jid=1484475&xid=865744356
.special-hidden
{
display: none;
}
14h
1
Surgo (PTY) Ltd, a global award winner in the BPO industry, has partnered with an industry leading Retail Group in South Africa.
If you are a qualified Shop / Floor Assistant, experienced in Retail / FMCG, please apply here!
Job Purpose:
To deliver service excellence through efficient customer service, point of sale (POS) operational activities and merchandising in store that leads to a positive customer experience.
Key Performance Areas (but not limited to):
• To efficiently execute all operational activities at the point of sale in a timely and efficient manner
• To maintain high levels of accuracy when scanning merchandise and collecting payment for goods purchased
• To ensure the safe handling of cash at all times
• To make customers aware of promotions in order to positively affect sales and to ensure customer satisfaction
• To deliver superior customer service by acting as a brand ambassador, being visible and offering a friendly and professional service
• To efficiently execute and maintain all merchandising and general housekeeping duties according to store and visual merchandise standards
• To support the Groups vision to be the customers first choice health and beauty retailer by living and driving the company values
• To maintain updated knowledge on products, ranges, promotions and events in order to provide the correct information to customers at all times Requirements:
• Grade 12
• 1 - 2 years' experience in a customer facing role within a retail/FMCG store operations environment
• Understanding of merchandising and promotions principles
• Understanding of stock management procedures
• Skills in customer service excellence
• SA ID / Valid Work Permit (if applicable)
• Well versed in English and any other official South African Language
• Clear criminal record
• Computer Literate Working hours:
• As per operational requirements Salary:
• Market related based on level of experience Position Location:
• Gqeberha, Eastern Cape Should you wish to apply for the position, please apply directly via this job board, please ensure that you quote reference number 202374 subject heading or email body.
Surgo (Pty) Ltd will consider all applications in terms of its Employment Equity (EE) and is committed in maintaining diversity in its appointments. Surgo (Pty) Ltd, therefore also encourages people with disabilities and from other diverse backgrounds to apply. Due to the high volume of applications, should you not receive feedback within three months upon submission, you can assume your application was unsuccessful and we encourage you to reapply. Please note that as a registered member of APSO, Surgo (PTY) Ltd. does not hold applicants accountable for any application fee.
Your CV will be kept on our database for us to contact you should any future vacancies become available. If you do not wish for us to keep your CV for any other positions, please email recruitment@surgo.co.za
Surgo (PTY) Ltd. reserves t...Job Reference #: 202374
14h
1
Position – Human Resource Consultant
Location – Emalahleni Mpumalanga
Responsibilities
source and short-list appropriate applicants for vacancies as identified for department managersGuide the applicant selection processAssist disciplinary and grievance enquiry participants to maintain fair procedures and substantivenessAnalyses HR data (e.g., exit interviews; disciplinary hearings) and presents insightful and added-value reportsAssist employees to resolve personal issuesAdd value to line management by assisting them with performance consultingEnsure HR administration is accurate and kept up to dateStrengthen the company’s vision, mission, and values through OD interventionsCo-ordinate EE committee activities and initiatives ensuring compliance with the company’s EE plan and EE legislationAre committed through their actions to build constructive employee relations and resolving disputes.
Qualifications Requirements
Matric (NQF 4)
HR Diploma or Degree (NQF 6)
Customer service focus, energy and drive to get the job done
3 years’ experience in a similar position.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zODcwMTkwMzgwP3NvdXJjZT1ndW10cmVl&jid=1124464&xid=3870190380
.special-hidden
{
display: none;
}
14h
1
Main Purpose:
To sell policies, recruit, develop and train representatives to achieve the set targetTo be developed into a Sales Manager when vacancies are available (Key Individual)
- 1 year ProgrammeCourses- Full-Time Academic School: 0 – 1 month- Commissions and Finance- Compliance- Reports- Practical School (2 – 12 months)- COB Long term and Investments- CPD- Supervision (FSP 4.1);- Recruitment process orientation (On-Boarding)- MS Office (Spread over 12 months – if necessary)- Digital training- Sales reports Orientation- Sales performance management orientation- Disciplinary action
Requirements
Formal Education
• Matric• Relevant Full Qualification as per the FSCA Board Notice
Technical/Legal Certification
• Registered as an Employee Representative (FSCA)• Regulatory Examination Level 1: Representatives (RE5)• Regulatory Examination Level 1: Key Individuals (RE1)• Class of Business: Long Term Insurance & Investment (Advantage)• Updated CPD points
Experience
• 2 Years’ Experience in the Insurance Industry• Experience in Category A, B1, B2, C and Retail Benefits• Fit and Proper Rep for all Tier 1 products • Fit and Proper Rep for all Tier 2 products
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zMzkwNjU4OTI3P3NvdXJjZT1ndW10cmVl&jid=1500803&xid=3390658927
.special-hidden
{
display: none;
}
14h
1
New Vacancy Available!! Our leading client in the Business Development Sector is looking to employ a Senior Communications, Corporate & Office Manager to join their dynamic team in East London.
Strategic Planning and Governance
Provide input to the organisational strategy, as well as reviewing organisational activities and recommend corrective actions if necessary.
Develop unit operational plans and align all activities undertaken in the unit to ensure delivery of corporate objectives.
Enhance and implement treasury regulation systems, processes, procedures, tools, and control systems.
Ensure monthly, quarterly, and annual reports are prepared accurately, maintained, and submitted timeously to all stakeholders.
Implement controls within the section which minimize potential risk to stakeholders.
Manage preparation and support of all internal and external audits.
Participate in management forums within the company, contributing expertise to enable sound decision making.
Facilitate departmental communication through appropriate structures and systems.
Develop and manage relationships with all internal and external stakeholders.
Oversee Corporate Communications
Develop and manage the relevant communication strategies for projects, initiatives and campaigns.
Communicate Unit operational plans and strategy to staff and shareholder department.
Enhance relationships with key stakeholders through the effective handling of the media, and other relevant communication channels.
Create, implement and measure success of comprehensive communications interventions and public relations programmes that will enhance the image and position of the company in the market and the general public.
Ensure strong and preferential media relations are built and maintained.
Define and implement the communication policies.
Provide advice to Board, Executive Management and business units on effective internal and external communication structures and processes.
Plan, formulate, evaluate, recommend and implement programmes, systems and procedures for Corporate Communications.
Develop and manage a Corporate Communications Calendar.
Provide support to institutional events, initiatives, and programmes
Direct the sharing developing and sharing of corporate communications material relating to key organisational events, missions and other stakeholder related events
Content Generation and Management Oversight
Responsible for building a brand identity and online presence through the creation and dissemination of multimedia content online.
Develop various organisational internal and external electronic and hard copy documentation like magazines, information brochures, investor and board packs, etc.
Collate valuable information, track quality and lucrative flagship projects and worthy milestones created as source of attraction to products and services.
Develop content of good quality for the Corporate Plan and reports for circulation to all relevant stakeholder
SECTOR: Business
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93ZWJhcHAucGxhY2VtZW50cGFydG5lci5jb20vd2kvYXBwbGljYXRpb25fZm9ybS5waHA/aWQ9c3RhZmZzb2xzJnZhY2FuY3lfcmVmPUUuTDAwMTg1OC9CRw==&jid=1779472&xid=E.L001858/BG
.special-hidden
{
display: none;
}
14h
1
VACANCY ALERT!!An opportunity has arisen with our client, a 5-star lodge near Paterson, for a Chef de Partie. This is a live-in position.
Duties:
Knowledgeable and ability to produce a variety of authentic and innovative cuisines
Support the kitchen management team to ensure that the kitchen is ready for service before the beginning of each shift
Stay up to date with changes in policies, ways of working and standards in the industry
Responsible for ensuring all equipment, tools and machinery are properly handled and cared for
Follow all standard operating procedures for service to guests, ensuring exceptional food quality is provided to guests at all times
Support the kitchen management team to ensure that all kitchen records are appropriately maintained
Ensure adherence to all relevant food safety, security and health and safety policies, processes and procedures ensuring compliance with local legislation
Support the other kitchen sections to ensure that the work is completed in a manner that allows guests to receive the highest level of personalised service at all times
Requirements:
Diploma or other formal qualification in Culinary Arts
Completed commercial cookery apprenticeship or equivalent
At least 3 years experience in producing up-market cuisine
Demonstrated previous experience in this position at a 5-star Lodge/Hotel
Hold a current food handler health card or HACCP/Food Safety certificate
Be able to speak and understand English
Knowledge of GAAP POS and MS Excel
Good knowledge of food costing and wastage control
Sober habits
Ability to work well in a team and under high levels of pressure
Good knowledge of F&B Service
SECTOR: Hospitality / Hotel
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93ZWJhcHAucGxhY2VtZW50cGFydG5lci5jb20vd2kvYXBwbGljYXRpb25fZm9ybS5waHA/aWQ9c3RhZmZzb2xzJnZhY2FuY3lfcmVmPVBFMDA1ODQ3L0FL&jid=1781659&xid=PE005847/AK
.special-hidden
{
display: none;
}
14h
1
Main Purpose:
To sell policies, recruit, develop and train representatives to achieve the set targetTo be developed into a Sales Manager when vacancies are available (Key Individual)
- 1 year ProgrammeCourses- Full-Time Academic School: 0 – 1 month- Commissions and Finance- Compliance- Reports- Practical School (2 – 12 months)- COB Long term and Investments- CPD- Supervision (FSP 4.1);- Recruitment process orientation (On-Boarding)- MS Office (Spread over 12 months – if necessary)- Digital training- Sales reports Orientation- Sales performance management orientation- Disciplinary action
Requirements
Formal Education
• Matric• Relevant Full Qualification as per the FSCA Board Notice
Technical/Legal Certification
• Registered as an Employee Representative (FSCA)• Regulatory Examination Level 1: Representatives (RE5)• Regulatory Examination Level 1: Key Individuals (RE1)• Class of Business: Long Term Insurance & Investment (Advantage)• Updated CPD points
Experience
• 2 Years’ Experience in the Insurance Industry• Experience in Category A, B1, B2, C and Retail Benefits• Fit and Proper Rep for all Tier 1 products • Fit and Proper Rep for all Tier 2 products
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yMTAyNjMwMzk1P3NvdXJjZT1ndW10cmVl&jid=1492364&xid=2102630395
.special-hidden
{
display: none;
}
14h
1
Main Purpose:
To sell policies, recruit, develop and train representatives to achieve the set targetTo be developed into a Sales Manager when vacancies are available (Key Individual)
- 1 year ProgrammeCourses- Full-Time Academic School: 0 – 1 month- Commissions and Finance- Compliance- Reports- Practical School (2 – 12 months)- COB Long term and Investments- CPD- Supervision (FSP 4.1);- Recruitment process orientation (On-Boarding)- MS Office (Spread over 12 months – if necessary)- Digital training- Sales reports Orientation- Sales performance management orientation- Disciplinary action
Requirements
Formal Education
• Matric• Relevant Full Qualification as per the FSCA Board Notice
Technical/Legal Certification
• Registered as an Employee Representative (FSCA)• Regulatory Examination Level 1: Representatives (RE5)• Regulatory Examination Level 1: Key Individuals (RE1)• Class of Business: Long Term Insurance & Investment (Advantage)• Updated CPD points
Experience
• 2 Years’ Experience in the Insurance Industry• Experience in Category A, B1, B2, C and Retail Benefits• Fit and Proper Rep for all Tier 1 products • Fit and Proper Rep for all Tier 2 products
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yNjEyNTE2MTQxP3NvdXJjZT1ndW10cmVl&jid=1426235&xid=2612516141
.special-hidden
{
display: none;
}
14h
1
A well-established citrus farming group based in the Eastern Cape Midlands (Fort Beaufort area) has a vacancy for an experienced Technical/Farm Manager.
The position is responsible for accurate and timely compliance with various operational requirements on a daily basis.
Awesome job opportunity awaits with this progressive and dynamic operation!
Attributes:
People’s person with the ability to communicate at all levels.Must have solid working knowledge of citrus production.5 - 10 years practical experience in citrus production.Excellent record keeping.MS Office literate.Must be able to transfer skills and knowledge.Must be organised, able to work under pressure and committed.Technical competence with a proven track record in farming.Familiar with legal and market access requirements.Good working knowledge of LRA.Knowledge of automated irrigation systems.Proven ability at calibrating spray machinery is essential.Experience in basic trial and comparison of products will be advantageous.Mechanical experience and knowledge will be advantageous.
Qualifications
Not essential but advantageous.Valid Drivers Licence essential.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yOTIyMTkwOTc3P3NvdXJjZT1ndW10cmVl&jid=1484181&xid=2922190977
.special-hidden
{
display: none;
}
15h
1
Objective of function
Operation and control of development processes in accordance with BOS / PLUS for automotive trim development from concept to production readiness as project responsible Trim Engineer
Main tasks/important responsibilities
Technical project coordination in close cooperation with program managementPattern development responsibility for prototype and serial production trim covers until serial production release utilizing the CAD System OPTITEX as well as technically leading the supporting team members (Technician / Specialist) and ensuring the fulfilment of the intended project maturity, Bill of Material management in TPDM , TC11, Excel , Word and PPTX knowledgeCreation, Documentation and Maintenance of technical drawings via Canvas Drawing ProgramMaintenance of the project folder (technical part / Masterfile)Competent project contact partner for all internal and external customersTo create and update the DFMEA and application in daily job. responsible of DFMEA introduction to the TeamSupport of the Cut &Sew and JIT plant(s) in the production launch phases. (DV, PV, SOP and PS)Supports the Complete Seat team at all interfaces to the trim cover like A-surface definition of the foam pads, example BBP, SMTE, ENG Responsible to define overbuild of the foam parts, trim attachment to the metal structure, etc.Supporting Complete Seat with Seat development.
Education (technical and/or commercial)
Job related technical degree like dressmaker / upholster / interior decorator
Job experience
Minimum 5 years of job experience in the production orientated Trim Development
Professional knowledge: in detail when specialist function
Well-founded knowledge in all areas of sewing techniques and their application.
Knowledge about the processes in Cut & Sew and JIT Plants.
Experienced in all current construction methods in the areas of Trim Development.
Good Technical abilities.
Experienced in the use of OPTITEX, LECTRA, ASSYST, GERBER.
User knowledge of a 2D-CAD system
Please forward CV and ALL supporting documentation to, careee-lee@profilepersonnel.co.za. Should you not hear from Profile Personnel within 14 days please consider your application unsuccessful for the vacancy. Please note all applications will automatically be added to our database for future vacancies.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xNTI4MzgxMTAyP3NvdXJjZT1ndW10cmVl&jid=1328673&xid=1528381102
.special-hidden
{
display: none;
}
15h
1
Our client, a manufacturing business based in Port Elizabeth, is seeking to employ an experienced (in manufacturing) and qualified Management Accountant to join their dynamic team.
A prosperous long-term career awaits the appointed candidate.
ONLY CANIDATES BASED IN PORT ELIZABETH WILL BE CONSIDERED.
Qualifications:
BCom with (CIMA - Preferable - not essential)
Experience:
3 - 5 Years’ experience in a similar roleManufacturing experience is essentialPastel experience essential
Duties include:
Financial AnalysisCash Flow Forecast and AnalysisReview Budgets and Forecasts (including variance and trend analysis)Monthly Analysis (reporting of operation results and financial controlling)Costings (calculations)Cost AnalysisCapital Expenditure AnalysisCash Book ManagementDebtorsCreditorsSales ForecastingStakeholder engagements (supplier, client, and auditors)Oversee Payroll (outsourced)Evaluating, analysing, and documenting cost saving & improvement suggestions
Other:
Support the Business Directors in a proactive manner, ensuring that the internal department relationships are properly maintainedGood knowledge of sound internal controlsManage work efficiently and effectivelyAlways perform high quality of work / have a strong / high work ethicDemonstrated analytical and problem-solving skillsEffective internal and external relationship building via good communicationEnsuring an effective control of company costs and assetsGood time management and priority setting skillsMust be able to take ownership and accountability of / for tasksMust have a questioning / probing mindResponsible for assisting with any financial audit requirements or compliance work
Must be:
AccountableBusiness mindedCollaborative mindsetDecisiveDedicatedDisciplinedDrivenDynamicEnergeticFlexible and agile thinking in a dynamic business environmentHigh attention to detailHighest integrityInnovativeSolutions focused
Should you apply for an advertised vacancy, kindly note that your application is deemed to be unsuccessful should you not receive a response from our offices within 2 weeks of application.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xMjkxODQ5ODQ2P3NvdXJjZT1ndW10cmVl&jid=1465761&xid=1291849846
.special-hidden
{
display: none;
}
15h
1
Type of Position:Applications from suitably qualified & experienced persons are invited to fill the above vacancy in the company's Production – Paint Shop Department.
Job Description and Responsibilities
Ensuring that all Paint shop electrical installations and PLC systems are maintained to company standards and requirements in order to ensure safe plant operation by means of structured maintenance systems such as PM’s, check lists, weekend work job cards etc.
Recommending, updating and modifying electrical installations to the latest engineering technology in order to stay in line with the latest technologies available on the market by constantly dealing with external suppliers and similar industrial companies.
Maintaining of electrical equipment to meet the required health & safety standards to ensure a safe work environment for all employees.
Making the necessary adjustments to facilities such as conveyor speeds, fan speeds, system pressures, tank levels etc. by means of PLC settings, controller adjustments and thereafter verify that the adjustments produced the required outcome by measuring the output performance/parameters.
Carrying out planned maintenance activities using the correct tools and testing equipment according to company systems, processes and procedures to ensure that all equipment is serviced at the required intervals as determined from time to time by the maintenance planner / original equipment supplier.
Activating participation on daily basis in the Shop Floor Management structure. This includes sectional meetings and problem resolution activities/implementation as driven by the team.
Education and Experience
NN Diploma/ National Diploma/Degree in Electrical Engineering (light current) / MechatronicsTrade test certificate Electrician /MillwrightMinimum 2-4years’ proven operations and maintenance experience within in the manufacturing environmentGood experience in VSD control system (Danfoss & SEW)Automation experience & Certified training (PLC’s Drives, etc.). Advantageous
Please forward CV and ALL supporting documentation to, Caree-Lee@profilepersonnel.co.za. Should you not hear from Profile Personnel within 14 days please consider your application unsuccessful for the vacancy. Please note all applications will automatically be added to our database for future vacancies.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zODkyODc4NjAyP3NvdXJjZT1ndW10cmVl&jid=1752796&xid=3892878602
.special-hidden
{
display: none;
}
15h
Save this search and get notified
when new items are posted!