Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Some search tips we've found useful:
- Check the spelling of your search terms
- Use fewer or more general search terms
- Try browsing a category related to your search terms
Ads in other locations
1
Job Description and Responsibilities:
Repair faulty equipment and parts i.e., welding guns, servo-pneumatic valves, transmission modules, tucker guns, sealer equipment to ensure availability of spare parts and equipment (spare part management).Resolve robotic electronic communication faults by adjusting the robotic program to prevent re-occurring robot communication faults and ensure uninterrupted production process.Analyse, fault find, repair and optimise sealer, toxing, welding, laser, bolting and rivet joining technology equipment failure to ensure achievement of quality requirements and efficient production process.Analyse PLC programs to resolve errors and determine root causes of Interbus or Profinet network errors, determine corrective actions to continue with the Production process and ensure uninterrupted Production run.Fault find, set up and program SEW drives by using the appropriate diagnostics software/tools such as Movitools, Motion Studio to ensure uninterrupted Production run.Modify, update and improve diagnostic software on HMI to identify the faulty equipment to facilitate speedy resolution to Production stoppages.Analyse and investigate severe or reoccurring Production stoppages to determine the real root cause of the stoppage and determine the appropriate preventative action and counter measure to ensure that the reoccurring of the fault are eliminated and/or prevented.Contact equipment suppliers and technology experts within the company to enquire regarding solutions to complex equipment problems and failures to ensure pending or reoccurring faults are eliminated or prevented.Document Production stoppages, severe breakdowns, problem sheet, Knowledge Management System, TPM Sheets and PM schedules to ensure all maintenance activities are documented, distributed and knowledge is retained, made available and utilized to prevent future stoppages or breakdowns.Conduct root cause analysis of all breakdowns immediately after completing the breakdown, by analyzing the situation, causes, countermeasures and actions, ensuring that all is recorded and reported on required control sheets and documents.Ensure that the robot Safety circuit is in good working order and that all the required condition that meets the safety standards is installed.Download robot and PLC program backups to ensure quick recovery of the facilities in the event of a loss of data.
Education and Experience:
A National Nated Diploma/ National Diploma/ B Tech/B Eng./ B Sc. Degree in Electrical Engineering/ Mechatronics.At least 5 years in vehicle manufacturing maintenance and/or technical environment.
Skills, Attributes & Other requirements:
Siemens PLC and robot training would be a distinct advantage.Able to read E-Plan Electrical and Pneumatic drawingsHa...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zNjA3NTg1MjkwP3NvdXJjZT1ndW10cmVl&jid=1427992&xid=3607585290
3d
1
Type of Position:Applications from suitably qualified & experienced persons are invited to fill the above vacancy in the companys Production – Paint Shop Department.
Job Description and Responsibilities
Ensuring that all Paint shop electrical installations and PLC systems are maintained to company standards and requirements in order to ensure safe plant operation by means of structured maintenance systems such as PM’s, check lists, weekend work job cards etc.
Recommending, updating and modifying electrical installations to the latest engineering technology in order to stay in line with the latest technologies available on the market by constantly dealing with external suppliers and similar industrial companies.
Maintaining of electrical equipment to meet the required health & safety standards to ensure a safe work environment for all employees.
Making the necessary adjustments to facilities such as conveyor speeds, fan speeds, system pressures, tank levels etc. by means of PLC settings, controller adjustments and thereafter verify that the adjustments produced the required outcome by measuring the output performance/parameters.
Carrying out planned maintenance activities using the correct tools and testing equipment according to company systems, processes and procedures to ensure that all equipment is serviced at the required intervals as determined from time to time by the maintenance planner / original equipment supplier.
Activating participation on daily basis in the Shop Floor Management structure. This includes sectional meetings and problem resolution activities/implementation as driven by the team.
Education and Experience
NN Diploma/ National Diploma/Degree in Electrical Engineering (light current) / MechatronicsTrade test certificate Electrician /MillwrightMinimum 2-4years’ proven operations and maintenance experience within in the manufacturing environmentGood experience in VSD control system (Danfoss & SEW)Automation experience & Certified training (PLC’s Drives, etc.). Advantageous
Please forward CV and ALL supporting documentation to, Caree-Lee@profilepersonnel.co.za. Should you not hear from Profile Personnel within 14 days please consider your application unsuccessful for the vacancy. Please note all applications will automatically be added to our database for future vacancies.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zODkyODc4NjAyP3NvdXJjZT1ndW10cmVl&jid=1752796&xid=3892878602
3d
1
SavedSave
Type of Position:
Applications are invited from suitably qualified & experienced employees to fill the above vacancy in Quality Assurance - QA Purchase Parts Department.
Job Description and Responsibilities
To ensure that the motor vehicle components perform consistently to specification throughout the life cycle of the component by:Initiating and managing the Qualifying Program for new part introduction.Implement continuous improvement by identifying the root cause for part deviation from specification and correct the deviation in all phases of the life cycle of the part.Testing and evaluating the performance of parts according to specification.Provide the required Technical Expertise for complete parts in respect of material and function.Initiate design improvements for complex problems on parts
Education and Experience
National Diploma /Degree in Mechanical Engineering /Electrical Engineering /Polymer /Quality)Minimum of 3 years relevant work experience in the manufacturing environment
Skills, Attributes & Other requirements
In-depth knowledge of applicable motor vehicle parts, their function, applicable specifications, part manufacturing processes and testing methods.Sound technical knowledge of motor vehicle components and systemsKnowledge and application of Quality Tools e.g., DOE, SPC, FMEA, 8DAbility to interpret drawings and related specifications.Strong analytical abilityComputer literate (Ms Office)Ability to effectively communicate and present to all levels within the company and externally. (Written and verbally)Ability to work independently.Be prepared to travel, local and overseas at short notice.Have a valid driver license.
Please forward CV and ALL supporting documentation to, Caree-Lee@profilepersonnel.co.za. Should you not hear from Profile Personnel within 14 days please consider your application unsuccessful for the vacancy. Please note all applications will automatically be added to our database for future vacancies
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yMjIxNTc5Mzk4P3NvdXJjZT1ndW10cmVl&jid=1695475&xid=2221579398
3d
1
SavedSave
Overview:
An automotive company based in East London IDZ is looking for an Electrical Technician with PLC experience, within the Manufacturing environment, to join their team.
Minimum requirements:
Trade Test Qualification (Electrician/ Millwright) or Electrical Engineering Diploma3-5 years in an automotive, manufacturing environmentPLC experience essentialServo Drives and MotorsSwitchgear and logic knowledge
Responsibilities:
Attending to all breakdowns in the plant with the replacement of worn and damaged components and support production with reinstating equipment, jig fixtures and testing equipment to the intended operational state.Attending to and supporting preventative maintenance tasks which includes the definition and work required to ensure uptime of equipment, jigs fixtures and testing equipment and support the administrative documentation and follow-up work required thereof.Participate and Support CI ProjectsAttend to any building maintenance as is needed from time to time which includes housekeeping in the workshop and respective production/ plant areasAdministration of critical spares and the electronic maintenance system which includes ordering and stock levels of the prescribed componentSupport the installation and commissioning of equipment jigs fixtures and control systems related to new program launches and participates in the team in all related activities which includes quality, OHS and productivity activities and verifications thereofParticipation in system audits of the areas of responsibility related to ISO 14000 and IATF and support corrective actions from agreed improvementsAny reasonable tasks as given by direct report and management
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zMTg0ODYyNjg4P3NvdXJjZT1ndW10cmVl&jid=1584175&xid=3184862688
3d
1
SavedSave
Duties and Responsibilities:
Lead and manage the maintenance department, ensuring smooth and efficient operationsDevelop and implement preventative maintenance and continuous improvement programs to minimize downtime and optimize equipment performanceMaintain OEE on all equipment in line with company specificationsCoordinate and supervise maintenance activities, including routine inspections, repairs, and equipment overhaulsProvide technical expertise and guidance to the maintenance team, troubleshooting complex issues as they ariseMonitor and maintain inventory of spare parts, ensuring availability for timely repairs and replacementsManagement of contractorsEnsure that the maintenance function operates in accordance with the relevant legislation, including but not limited to OHS Act and By-Laws. Ensure adherence with all health, safety and environmental policies and procedures to ensure the safety and wellbeing of staff and visitorsKeep maintenance logs and report on daily activitiesInspect building structures to determine the need for repairs or renovations. Oversee building projects and renovationsReview utility consumption and strive to minimize costsEnsuring that facilities meet government regulations, health and security standards and energy efficiency requirements.Identification of training needs for subordinates to aid achieving objectives
Qualification and Experience:
A Matric CertificateDiploma/Degree in Mechanical/Electrical Engineering or equivalent10+ years working experience in plant maintenance, preferably in the Automotive industry, with 3 years in a managerial position
Knowledge, Skills and Abilities:
Experience in planning maintenance operationsStrong knowledge of engineering concepts, including electrical, hydraulics and mechanical systemsStrong knowledge of tooling, equipment, engineering specifications, and cost reduction methods in automotive applications·Working knowledge of the IATF 16949, ISO45001 and ISO14001 standardsSound knowledge of the OHS ActProblem-solving and analytical SkillsPlanning and Organisational SkillsKnowledge of facilities managementProficiency in MS Office applicationsExcellent verbal and written communications skillsKnowledge of ERP systemsAttention to detailfAbility to handle multiple tasks in a fast-paced, team-oriented and multi-cultural environmentGood interpersonal skillsGood presentation skills
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS85NDYxNTA5MDU/c291cmNlPWd1bXRyZWU=&jid=1677164&xid=946150905
3d
1
Electrical Foreman – Boilers - Eastern Cape, RNeg + Benefits + Company housing
Minimum qualification - An Electrician Trade test and Wiremans licence(advantage)Medium voltage experience and certification required.A Diploma in Electrical Engineering (a distinct advantage)Experience in Boiler systems is requiredAt least 12 years post apprenticeship experience (of which at least 5 should be supervisory experience)Strong maintenance experienceComputer literateWilling to travel
Seeking a hands-on Electrical Foreman with at least 12 years post apprenticeship experience (of which at least 5 years supervisory experience) for a position in Eastern Cape .
You will be responsible and accountable for the execution of all electrical projects and maintenance of equipment to ensure maximum effectiveness and productivity.
Hands-on management of the electrical departmentPlan, schedule, assign and supervise all electrical maintenance and projectsEstimate the time and material required for project electrical jobsEnsure that all projects are completed within the relevant timeframe and budgetSupervision of electricians, assistants, apprentices and contractorsPlan and manage preventative maintenance on all equipment, including BroilersRoot cause analysis and troubleshooting of electrical issuesEnsure compliance with the Companys Health and Safety and Quality Control policies
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yOTIxOTU0NDY2P3NvdXJjZT1ndW10cmVl&jid=1322342&xid=2921954466
3d
1
SavedSave
Our client in the Automotive sector based in East London, is looking to employ a Senior Technical Manager.
An awesome career opportunity awaits.
Requirements:
Minimum degree/diploma with qualification in Mechanical/Electrical Engineering or equivalent.PLC experience will be an added advantage.At least 10 years’ experience in a similar environment.Minimum of 10 years managerial experience.Familiar with project management principles.
Responsibilities:
Oversee both Engineering and Maintenance department to maximize full capacity.Liaise with the customers regarding product and process specific requirements.Develop and maintain the plant layout and process flows to create the best optimized process area to be effective and efficient.Develop project plans and project costing data.Develop APQP plans for implementation to ensure the best possible process specifications are met.Controls Engineering, project and APQP meetings.Oversee departmental responsibilities for engineering changes and development programs.Oversee process related downtime and find ways to eliminate this.Improve processes to reduce scrap energy and other related matters to ensure a cost saving drive within the department.Develop and implement engineering systems and maintenance procedures.Manage the implementation various programs and projects in both Engineering and Maintenance departments.Effectively manage subordinates and resources.Prepare engineering product information for quotation purposes.Liaise with the customers and suppliers regarding related technical issues.Ensure the YFAI Vision is upheld at all levels.Ensure adequate staffing and direct subordinates to achieve relevant goals timeously.Plan resources and budgets.Responsible for training, coaching, and guidance of subordinates.Monitor, manage and report on the performance of the Engineering function.Planning, organizing, controlling skills.Critical thinking and innovation.Excellent interpersonal and communication skills.
Please note should you not receive a response within two weeks of applying please consider your application unsuccessful.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yMDUxMDY2NTQxP3NvdXJjZT1ndW10cmVl&jid=1485052&xid=2051066541
3d
1
SavedSave
Our client in the Automotive Sector, based in East London is currently looking to employ a Software Engineer.
An awesome career opportunity awaits.
Requirements:
Minimum National Diploma Electrical / B.Eng. Mechatronics.2 – 5 Years’ experience in Automation.Mechanical, Electronics and Electrical Troubleshooting.Strong Understanding of Electrical Processes.Wonderware and Siemens WinCC advantageous.Ability to work shifts, weekends, and overtime.Excellent Communication Skills.Good Presentational Skills.Quality Focus and Team player.Driver’s License and Own Transport essential.
Responsibilities:
Knowledge of PLC Software Systems (Siemens).Strong understanding of SCADA and HMI systems (MES is advantageous).Setup of complex PLC hardware configurations.Setup of Interfaces to various devices.Project Planning, Installation and Commissioning support for installations.Mechanical, pneumatic & paint related service and project activities on paint and sealing robots.Responsible for commissioning and service activities.Build good business relationship with customer related to service activities.Site safety implementation during projects and service work.Attend site meetings and project meetings.Technical assistance during Production support time (Breakdowns).Verify and compile data records of all test readings.Meeting Project deadlines.
Please note should you not receive a response within two weeks of applying please consider your application unsuccessful.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yNTk4MTMxODExP3NvdXJjZT1ndW10cmVl&jid=1445332&xid=2598131811
3d
Successfully Added to List
View and manage your saved ads in your account.