Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Suggested
Results for fitter in Jobs in Port Elizabeth
1
Industrial Field TechnicianJob Position: Industrial Field TechnicianLocation: Port ElizabethSalary: Commensurate with experience and qualificationEmail your updated CV to recruit@onlinepersonnel.co.zaQualifications / Requirements:• Qualified Electrician/Fitter/Millwright• Minimum of 3 years working experience in a similar environment• Matric Certificate• Minimum of an N4 Technical certificate• Must be fast learner and must be able to work both independently and within a team environment• Good verbal and written communication skills• Valid driver’s licenseExperience and knowledge:• Secure the equipment/machinery to the floor – in some cases concrete work is required• Connect the machine electrically to – 230 Volt and 400 Volt. (Mostly 400V)• Connect the machine to the water supply – basic plumbing required• Connect the machine to the main drain system – basic plumbing required• Connect the machine to air ventilation system or to provide an exhaust solution• Program and setting of machines according to customers’ needs and provide training on the operation and maintenance of the machine• Complete all relevant paperwork i.e. invoice and job sheets• Identify electrical/electronic faults through a process of fault finding• Replace faulty electrical/electronic components/parts once the problem/s has been identified• Quote on repairs i.e. labour and parts involved or required to repair equipment/machinery• Identify when bearings need replacement (Mechanical requirement)• Replace bearings when needed• Repair gas and steam heated equipmentResponsibility:Email your updated CV to recruit@onlinepersonnel.co.zaQualifications / Requirements:• Qualified Electrician/Fitter/Millwright• Minimum of 3 years working experience in a similar environment• Matric Certificate• Minimum of an N4 Technical certificate• Must be fast learner and must be able to work both independently and within a team environment• Good verbal and written communication skills• Valid driver’s licenseExperience and knowledge:• Secure the equipment/machinery to the floor – in some cases concrete work is required• Connect the machine electrically to – 230 Volt and 400 Volt. (Mostly 400V)• Connect the machine to the water supply – basic plumbing required• Connect the machine to the main drain system – basic plumbing required• Connect the machine to air ventilation system or to provide an exhaust solution• Program and setting of machines according to customers’ needs and provide training on the operation and maintenance of the machine• Complete all relevant paperwork i.e. invoice and job sheets• Identify electrical/electronic faults through a process of fault finding• Replace faulty electrical/electronic components/parts once the problem/s has been identified• Quote on repairs i.e. labour and parts involved or required to repair equipment/machinery• Identify when bearings need replacement (Mechanical requirement)• Replace bearings when needed• Repair gas and steam heated equipmentJob Reference #:
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQyOTIwX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1155552&xid=1266_42920
.special-hidden
{
display: none;
}
2y
1
Industrial Field TechnicianJob Position: Industrial Field TechnicianLocation: Port ElizabethSalary: Commensurate with experience and qualificationEmail your updated CV to recruit@onlinepersonnel.co.zaQualifications / Requirements:• Qualified Electrician/Fitter/Millwright• Minimum of 3 years working experience in a similar environment• Matric Certificate• Minimum of an N4 Technical certificate• Must be fast learner and must be able to work both independently and within a team environment• Good verbal and written communication skills• Valid driver’s licenseExperience and knowledge:• Secure the equipment/machinery to the floor – in some cases concrete work is required• Connect the machine electrically to – 230 Volt and 400 Volt. (Mostly 400V)• Connect the machine to the water supply – basic plumbing required• Connect the machine to the main drain system – basic plumbing required• Connect the machine to air ventilation system or to provide an exhaust solution• Program and setting of machines according to customers’ needs and provide training on the operation and maintenance of the machine• Complete all relevant paperwork i.e. invoice and job sheets• Identify electrical/electronic faults through a process of fault finding• Replace faulty electrical/electronic components/parts once the problem/s has been identified• Quote on repairs i.e. labour and parts involved or required to repair equipment/machinery• Identify when bearings need replacement (Mechanical requirement)• Replace bearings when needed• Repair gas and steam heated equipmentResponsibility:Email your updated CV to recruit@onlinepersonnel.co.zaQualifications / Requirements:• Qualified Electrician/Fitter/Millwright• Minimum of 3 years working experience in a similar environment• Matric Certificate• Minimum of an N4 Technical certificate• Must be fast learner and must be able to work both independently and within a team environment• Good verbal and written communication skills• Valid driver’s licenseExperience and knowledge:• Secure the equipment/machinery to the floor – in some cases concrete work is required• Connect the machine electrically to – 230 Volt and 400 Volt. (Mostly 400V)• Connect the machine to the water supply – basic plumbing required• Connect the machine to the main drain system – basic plumbing required• Connect the machine to air ventilation system or to provide an exhaust solution• Program and setting of machines according to customers’ needs and provide training on the operation and maintenance of the machine• Complete all relevant paperwork i.e. invoice and job sheets• Identify electrical/electronic faults through a process of fault finding• Replace faulty electrical/electronic components/parts once the problem/s has been identified• Quote on repairs i.e. labour and parts involved or required to repair equipment/machinery• Identify when bearings need replacement (Mechanical requirement)• Replace bearings when needed• Repair gas and steam heated equipmentJob Reference #:
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQyOTIwX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1155552&xid=1266_42920
.special-hidden
{
display: none;
}
2y
1
Job Responsibilities General Demount and Fitting tyreKeeping the workplace Clean and TidyMust Wear PPE at All TimesBe able to complete Job TicketsBe able to deal with customersAdmin Matching Tyres with InvoicesRequirements Grade 12Forklift licenseLiterate (Must be able to Read and Write)Able to work under PressureAble to work as a TeamAble to work Overtime when requiredGood CommunicatorAttention to DetailReliable and honest
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5Xzc1NDgxX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1193016&xid=1109_75481
.special-hidden
{
display: none;
}
2y
1
Responsibilities: Investigate, diagnose and perform trade related maintenance and repair of equipment and machinery according to the maintenance requirements - scheduled, preventative & emergency maintainencePerform inspections in accordance with the relevent regulations, manufacturing and company standards.Report all defects and breakdowns on equipment and machinery.Develop, modify, construct and install related equipment required for the safe operation of all engineering equipment.Identify spares requirements and order according to departmental procedure.Work overtime, standby and be available for call-outs when required.Requirements and Qualifications: Qualified Fitter and Turner with Trade Certificate at recognised/accredited institution.At least 5 years experience in manufacturing.Matric or equivalentPlease consider your application unsuccessful should you not receive a response within 2 weeks.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzY1NTk5X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1161779&xid=1109_65599
.special-hidden
{
display: none;
}
2y
1
Industrial Field TechnicianJob Position: Industrial Field TechnicianLocation: Port ElizabethSalary: Commensurate with experience and qualificationEmail your updated CV to recruit@onlinepersonnel.co.zaQualifications / Requirements:• Qualified Electrician/Fitter/Millwright• Minimum of 3 years working experience in a similar environment• Matric Certificate• Minimum of an N4 Technical certificate• Must be fast learner and must be able to work both independently and within a team environment• Good verbal and written communication skills• Valid driver’s licenseExperience and knowledge:• Secure the equipment/machinery to the floor – in some cases concrete work is required• Connect the machine electrically to – 230 Volt and 400 Volt. (Mostly 400V)• Connect the machine to the water supply – basic plumbing required• Connect the machine to the main drain system – basic plumbing required• Connect the machine to air ventilation system or to provide an exhaust solution• Program and setting of machines according to customers’ needs and provide training on the operation and maintenance of the machine• Complete all relevant paperwork i.e. invoice and job sheets• Identify electrical/electronic faults through a process of fault finding• Replace faulty electrical/electronic components/parts once the problem/s has been identified• Quote on repairs i.e. labour and parts involved or required to repair equipment/machinery• Identify when bearings need replacement (Mechanical requirement)• Replace bearings when needed• Repair gas and steam heated equipmentResponsibility:Email your updated CV to recruit@onlinepersonnel.co.zaQualifications / Requirements:• Qualified Electrician/Fitter/Millwright• Minimum of 3 years working experience in a similar environment• Matric Certificate• Minimum of an N4 Technical certificate• Must be fast learner and must be able to work both independently and within a team environment• Good verbal and written communication skills• Valid driver’s licenseExperience and knowledge:• Secure the equipment/machinery to the floor – in some cases concrete work is required• Connect the machine electrically to – 230 Volt and 400 Volt. (Mostly 400V)• Connect the machine to the water supply – basic plumbing required• Connect the machine to the main drain system – basic plumbing required• Connect the machine to air ventilation system or to provide an exhaust solution• Program and setting of machines according to customers’ needs and provide training on the operation and maintenance of the machine• Complete all relevant paperwork i.e. invoice and job sheets• Identify electrical/electronic faults through a process of fault finding• Replace faulty electrical/electronic components/parts once the problem/s has been identified• Quote on repairs i.e. labour and parts involved or required to repair equipment/machinery• Identify when bearings need replacement (Mechanical requirement)• Replace bearings when needed• Repair gas and steam heated equipmentJob Reference #:
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQyOTIwX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1155552&xid=1266_42920
.special-hidden
{
display: none;
}
2y
1
Port Elizabeth - Provide complete customer satisfaction in a polite and professional manner. • Ensure proper communication between self, workshop staff (supervisor and controller) and customer. • Ensure OHSACT requirements are met in all actions on company and client premises; maintains a safe work environment by verifying vehicle safety device operations, following standards and procedures and in general complying with legal regulation. • Updates job knowledge by participating in educational opportunities. • Perform high quality workmanship on material handling components as well as manufacturing of new parts. • Operate lathes, milling machines, grinders, welders, etc in a safe, economic manner. • Perform according to the required industry standards Matric, Grade 12 or equivalent qualification • Trade test certificate (machinist, welding, fitter, boiler maker) • Code 8 driver's licence (for field service technicians) • Qualified welder, turner, machinist, fitter, boiler maker plus experience with forklifts or similar material handling minimum working experience of 5 years. • Excellent work ethic – honest, reliable, hardworking, dedicated and takes pride in work carried out • Highly developed prioritising and multi-tasking skills; strong sense of urgency; problem solving and decision-making skills • Excellent communication skills with people at all levels in an organisation • Dedication to service excellence in every aspect of work carried out; strong focus on attention to detail and accuracy
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQ4NTIzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1183915&xid=1266_48523
.special-hidden
{
display: none;
}
2y
1
Purpose of the Role: To deliver high quality production services (repair, overhaul, and modifications) in a safe and efficient manner, ensure success by ensuring long term availability, serviceability of locomotives and oversee maintenance plans of Locomotives as per required standards. Duties / Responsibilities: To carry out the heavy repair and overhaul of locomotives in line with industry standards;To ensure the maintenance of all locomotives according to RSR requirements, maintenance schedules and OEM standards;Maintenance and repairs for all sites and do rolling stock;Ensuring Health and Safety procedures as laid down in the Safety Management System; SANS 3000-2-3-2017 adhered (Requirements for systemic engineering and operational safety standards-rolling stock);Procuring and managing relevant parts from suppliers and ensure quality checks; To ensure all locomotives reports are captured on ACAP;To ensure all components repair are managed and controlled;Ensure spare parts inventory is up to date at Head Office and at all sites conduct regular audits;Ensure tracker and camera systems are installed and monitored:Monitor diesel fuel usage and gather monthly reports on consumption, shunting kilos, main line kilos, monthly hourly readings of locomotives; Minimum Requirements: Qualified Artisan (Must be Diesel Electric);Computer Skills (Safety Awareness);Able to draft reports;Able to identify hazards and Risk AssessmentsIncident investigations5 years relevant work experience as a senior diesel electric locomotive fitterValid driving license;Willing to work long and flexible hours including evenings, weekends and holidays as per operational requirements
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzYwOTQ3X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1140266&xid=1109_60947
.special-hidden
{
display: none;
}
2y
1
Reference: JC52256
Our client who specializes in automotive components is seeking a fitter and turner within the Port Elizabeth region
Duties include, but are not limited to:
* Must run a shift on his own.
* Must work shifts and overtime as required
* Assist the EMSEC GOLDWING in maintaining machine safety and meet deadline as required
* Do fault finding and repairs on machines.
* Ensure that TPM2 are done correctly and on time.
* Must be competent in hydraulics and pneumatics.
* Be able to do minor welding repairs.
* Be actively involve with continuous improvement of machinery.
* Be involved with apprentice training.
* Be able to do pipe fitting.
* Assist with projects.
* Must be able to work under minimum supervision.
* Ensure that minimum stock levels on critical spares are kept intact.
* Be able to do minor machining. (milling, grinding, turning)
* Be involve with machine upgrades.
Position requirements as follows:
* Education/Experience:
Trade tested artisan (Fitter Trade) with at least 5 years related experience in areas such as Preventative maintenance, machine breakdowns and safety systems. Must have a sound working knowledge of Hydraulics and Pneumatics.
* Reasoning Ability:
Ability to work as a team member, under pressure with good organizational skills and problem-solving capabilities.
* Computer Skills:
To perform this job successfully, an individual should be computer literate in MS Word and MS Excel.
Position requirements as follows:
* Education/Experience:
Trade tested artisan (Fitter Trade) with at least 5 years related experience in areas such as Preventative maintenance, machine breakdowns and safety systems. Must have a sound working knowledge of Hydraulics and Pneumatics.
* Reasoning Ability:
Ability to work as a team member, under pressure with good organizational skills and problem-solving capabilities.
* Computer Skills:
To perform this job successfully, an individual should be computer literate in MS Word and MS Excel.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI1MTY1X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1187491&xid=1555_25165
.special-hidden
{
display: none;
}
2y
1
*Reference: PE000728-NV-1*
Our client is seeking a Mechanical Fitter accountable for providing preventative maintenance, performing machining where necessary and attending to mechanical breakdowns to ensure Plant availability and minimize downtime.
Open position : Mechanical Fitter
Location : Port Elizabeth
Salary : Market related
Reporting to : Maintenance Supervisor
Type : Permanent position
Job requirements :
* Applicants must be a qualified Fitter with a recognized trade test.
* Must have 5 years’ post apprenticeship experience in a manufacturing environment.
* General machining experience as well as CNC, pneumatic / hydraulic maintenance experience is essential.
* Must be prepared to work shifts, stand-by and/or overtime at short notice.
* Must have own reliable transport.
* Basic computer literacy will be advantageous.
* Must be prepared to complete an assessment and interview.
Duties :
* Conduct breakdown maintenance, complete proactive maintenance / maintain plant & machinery.
* Assist with installation and commissioning of new equipment.
* Perform planned maintenance tasks on mechanical equipment.
* Adhere to industry environmental, safety & OHSA standards.
* Fault find / test and evaluate equipment for irregularities then repair the same.
* Investigate problem areas by reading and working from mechanical drawings.
* Perform machining operations relevant to associated maintenance or repairs.
* Perform safety installations and compliance.
* Efficiently utilise the planned maintenance system with reference to the inline maintenance schedules and shutdown maintenance schedules (i.e. EAM).
* Adhere to both industry quality standards and the requirements of ISO 9001.
* Where appropriate, oversee work of contractors on site.
* Provide support and assistance to all departments.
Should you meet the above job requirements, please email your CV to (nanette@kingrec.co.za)(mailto:nanette@kingrec.co.za)
Please add “Mechanical Fitter” into the subject line of your email.
No reply after 2 weeks indicates that you have been unsuccessful.
R
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzE1OTMzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1170660&xid=1555_15933
.special-hidden
{
display: none;
}
2y
1
Reference: JC04
Our client based in Newton Park is seeking a Industrial Field Technician within the Port Elizabeth Region.
Duties include, but are not limited to:
* Install and provide operating training on industrial equipment
* Prepare quotations and repair industrial equipment
* Carry out routine maintenance on industrial equipment
Position requirements as follows:
* Must be a Qualified Electrician/Fitter/Millwright.
* Have a minimum of 3 years working experience in a similar environment.
* Must have a Matric Certificate.
* Have a minimum of an N4 Technical certificate.
* Must demonstrated the ability to be a keen learner with a "make it happen attitude".
* Must be fast learner and must be able to work both independently and within a team environment.
* Must possess good verbal and written communication skills.
* Must have valid driver's license.
Should you want to apply for the position, please send through your CV and qualifications to the following email address and use the reference number for the position as the subject of the email
Email: (Email Address Removed)
Should you not get an email from us within 2 weeks, consider your application unsuccessful
*Desired Skills: *
* Industrial
* Technician
* Field technician
*Desired Work Experience: *
* 2 to 5 years
*Desired Qualification Level: *
* Certificate
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU0XzcyMjlfXzQ5Nz91dG1fc291cmNlPWd1bXRyZWUmdXRtX21lZGl1bT1mZWVkJmtleXdvcmQ9&jid=1159840&xid=1554_7229
.special-hidden
{
display: none;
}
2y
1
Responsibilities: Investigate, diagnose and perform trade related maintenance and repair of equipment and machinery according to the maintenance requirements - scheduled, preventative & emergency maintainencePerform inspections in accordance with the relevent regulations, manufacturing and company standards.Report all defects and breakdowns on equipment and machinery.Develop, modify, construct and install related equipment required for the safe operation of all engineering equipment.Identify spares requirements and order according to departmental procedure.Work overtime, standby and be available for call-outs when required.Requirements and Qualifications: Qualified Fitter and Turner with Trade Certificate at recognised/accredited institution.At least 5 years experience in manufacturing.Matric or equivalentPlease consider your application unsuccessful should you not receive a response within 2 weeks.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzY1NTk5X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1161779&xid=1109_65599
.special-hidden
{
display: none;
}
2y
1
Our client is looking to employ a Fitter in their organization based in Port Elizabeth. Requirements: Grade 12/N3.Must be a qualified, trade tested Fitter.Minimum of 3 years working experience in a factory environment with dust units.Electrical knowledge will be advantageous.Must be able to work at heights and in confined spaces.Problem solving skills with ability to take initiative.SHE awareness.Ability to work as an integral team member.Honesty and integrity.Oral and written communication skills.Tolerance for stress, ability to work under deadline pressure.Must be able to work shifts. Duties and Responsibilities: Maintain machineryDo fault finding on machineryTo report problems timeouslyDaily housekeepingDay to day pipe work, valves, pumps, motors, welding or brazing parts. If you are not contacted within two weeks of applying, please consider your application unsuccessful.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5Xzg1NjE5X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1216839&xid=1109_85619
.special-hidden
{
display: none;
}
2y
1
Responsibilities: Investigate, diagnose and perform trade related maintenance and repair of equipment and machinery according to the maintenance requirements - scheduled, preventative & emergency maintainencePerform inspections in accordance with the relevent regulations, manufacturing and company standards.Report all defects and breakdowns on equipment and machinery.Develop, modify, construct and install related equipment required for the safe operation of all engineering equipment.Identify spares requirements and order according to departmental procedure.Work overtime, standby and be available for call-outs when required.Requirements and Qualifications: Qualified Fitter and Turner with Trade Certificate at recognised/accredited institution.At least 5 years experience in manufacturing.Matric or equivalentPlease consider your application unsuccessful should you not receive a response within 2 weeks.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5Xzc5MzI0X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1205279&xid=1109_79324
.special-hidden
{
display: none;
}
2y
1
We are seeking a Trade Tested Fitter with injection moulding experience within the automotive sector.Requirements: Minimum 3 to 5 years’ experience within plastic injection mouldingInjection or blow moulding experience is a mustMust have experience within automotive sectorSound experience in fault finding and preventative maintenanceTurning and Milling experienceMust be able to work under pressureAbility to work without direct supervisionReliable transport
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5Xzg1OTY1X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1216919&xid=1109_85965
.special-hidden
{
display: none;
}
2y
1
Reference: JC52256
Our client who specializes in automotive components is seeking a fitter and turner within the Port Elizabeth region
Duties include, but are not limited to:
* Must run a shift on his own.
* Must work shifts and overtime as required
* Assist the EMSEC GOLDWING in maintaining machine safety and meet deadline as required
* Do fault finding and repairs on machines.
* Ensure that TPM2 are done correctly and on time.
* Must be competent in hydraulics and pneumatics.
* Be able to do minor welding repairs.
* Be actively involve with continuous improvement of machinery.
* Be involved with apprentice training.
* Be able to do pipe fitting.
* Assist with projects.
* Must be able to work under minimum supervision.
* Ensure that minimum stock levels on critical spares are kept intact.
* Be able to do minor machining. (milling, grinding, turning)
* Be involve with machine upgrades.
Position requirements as follows:
* Education/Experience:
Trade tested artisan (Fitter Trade) with at least 5 years related experience in areas such as Preventative maintenance, machine breakdowns and safety systems. Must have a sound working knowledge of Hydraulics and Pneumatics.
* Reasoning Ability:
Ability to work as a team member, under pressure with good organizational skills and problem-solving capabilities.
* Computer Skills:
To perform this job successfully, an individual should be computer literate in MS Word and MS Excel.
Position requirements as follows:
* Education/Experience:
Trade tested artisan (Fitter Trade) with at least 5 years related experience in areas such as Preventative maintenance, machine breakdowns and safety systems. Must have a sound working knowledge of Hydraulics and Pneumatics.
* Reasoning Ability:
Ability to work as a team member, under pressure with good organizational skills and problem-solving capabilities.
* Computer Skills:
To perform this job successfully, an individual should be computer literate in MS Word and MS Excel.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI1MTY1X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1187491&xid=1555_25165
.special-hidden
{
display: none;
}
2y
1
*Reference: 39032725*
Orion Engineered Carbons (NYSE: OEC) is a leading global supplier of carbon black, a solid form of carbon produced as powder or pellets. The material is made to customers' exacting specifications for tires, coatings, ink, batteries, plastics and numerous other specialty, high-performance applications. Carbon black is used to tint, colorize, provide reinforcement, conduct electricity, increase durability, and add UV protection. Orion has innovation centers on three continents and 14 plants worldwide, offering the most diverse variety of production processes in the industry. The company's corporate lineage goes back more than 160 years to Germany, where it operates the world's longest-running carbon black plant. Orion is a leading innovator, applying a deep understanding of customers' needs to deliver sustainable solutions. For more information, please visit orioncarbons.com.
To install, maintain and repair mechanical, equipment. To assist with planning and communicate /report within maintenance team. Update computer systems (SAP). Must be familiar with requirements for safety systems on plant equipment and be able to maintain them in working condition. Detects and reports faulty equipment.
* *Maintenance Support Service*
* Inspect all plant equipment for wear or possible defects, execute repairs if necessary.
* Load job cards daily on faulty equipment after inspections.
* Lubricate equipment.
* Clean grease nipples and equipment after lubrication.
* Remove access grease from the equipment daily.
* Ensure that all rotating equipment is cleaned and kept in good painted condition.
* Maintain all equipment as per planned maintenance system, as well as requested maintenance or breakdowns.
* Update completed planned maintenance schedules on computer.
* Drive forklift to move equipment to workshop for maintenance.
* Maintenance includes:
- - change seals
- vee belts & couplings
- reactor sections
- filter bags & cages
- pillow - blocks
- taper lock
- parallel & hanger bearings
- rollers on conveyers
- Fit lubricating extension pipes
- filters & steam traps
- make gaskets for flanges
- overhaul machines.
* Do safety checks on all equipment.
* General housekeeping :
* Ensure that all bolts, nuts, gaskets, lagging, cladding, metal, welding rods and anything else is removed from the plant after the work is done.
* Construct / assemble new equipment.
* Install & commission new equipment.
* Upgrade/modify existing equipment.
* Minor gas or arc welding and plastic related welding.
* On a daily basis job cards must be updated to reflect the exact work done on the equipment.
* Close off the job cards that are completed daily.
* Maintain the computer maintenance system.
2. *Scheduled Maintenance*
* Perform preventive and corrective maintenance activities as per plant safety regulations, maintenance plans and procedures.
* Must be thoroughly familiar with safety requirements and installed safety systems
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzQ3NTUwX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1235092&xid=1555_47550
.special-hidden
{
display: none;
}
2y
1
Duties and Responsibilities:Repairs and maintenance to machinery and equipment in line with prescribed regulations and standards;Regular inspections, fault finding and preventative maintenance jobs;Innovation and business improvements in support of operational and segment goals;Implemented initiatives of business plans;Turning, milling, welding and fitting for fabrication of components;Participate in the mini-business activities (E²);Adhering to relevant health, risk & safety regulations and quality standards.Key Skills Repairs and maintenance to machinery and equipment in line with prescribed regulations and standards;Regular inspections, fault finding and preventative maintenance jobs;Innovation and business improvements in support of operational and segment goals;Implemented initiatives of business plans;Turning, milling, welding and fitting for fabrication of components;Participate in the mini-business activities (E²);Adhering to relevant health, risk & safety regulations and quality standards. Qualifications N3 equivalent Mechanical qualification (NQF 4), Mechanical Trade (Fitter/ Turner/ Millwright)2 years experience in a Manufacturing environmentN4 N6 Technical qualification will be advantageousExperience in an FMCG environment will be advantageousWorking experience with high speed bottling machinery a distinct advantageLabelling experience advantageous
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5Xzc2MTEyX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1195226&xid=1109_76112
.special-hidden
{
display: none;
}
2y
1
Our client in the Manufacturing / Supply industry is seeking two Trainee Block Makers to join their company, based in Port Elizabeth / Gqeberha. Requirements:Available Immediately.Technical or Trade (Fitter).At least N3 (Matric) plus trade qualification.Minimum 3 years’ experience in automated production plants as an operator (mechanical maintenance and repairs).Numerical literacy.Experience leading a small team in a similar environment.Solid technical experience.Experience operating SCADA systems.Competent Microsoft Office (Advantageous)Good reading and writing skills.Good communication skills.Accuracy and attention to detail.Responsibilities:Know concrete and continuously monitor the batching for accuracy and consistency per product.Plant and equipment availability.Understand the block machine, setup, and its settings per mould.Understand the concept of Throughput (TP).Make exceptional quality the first time.Choose, know, and guide your team.Health and safety.Record keeping and reporting.Hand over to the next shift Block Maker and writing the information of the past shift with all its achievements and failures.Have a meetings to highlight the safety, quality, production and attendance issues from the previous shifts and the targets for the shift.Ensure that the machine is set up correctly.Continually inspect the various sections of the production process to ascertain correctness and to correct where necessary.In the case of day shift, the machine is to be stopped for no more than 4 hours for cleaning and maintenance. In this time the BM must ensure that all areas are cleaned correctly.Moulds should be planned for and changed in this cleaning time, ensuring mould change downtime is kept to a minimum.Before the end of the shift the BM must check and sign off the Daily Production Sheet for their shift and prepare the handover log/register to ensure that all plant and production issues are brought clearly to the relieving BM’s attention. If you are not contacted within two weeks of applying, please consider your application unsuccessful
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQ4ODY2X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1185384&xid=1266_48866
.special-hidden
{
display: none;
}
2y
1
SJ04
*Key Performance Areas would include, but are not limited to:*
* Repairs and maintenance to machinery and equipment in line with prescribed regulations and standards;
* Regular inspections, fault finding and preventative maintenance jobs;
* Innovation and business improvements in support of operational and segment goals;
* Implemented initiatives of business plans;
* Turning, milling, welding and fitting for fabrication of components;
* Participate in the mini-business activities (E²);
* Adhering to relevant health, risk & safety regulations and quality standards.
*The successful candidate must preferably have the following experience/skills:*
* N3 equivalent Mechanical qualification (NQF 4), Mechanical Trade (Fitter/ Turner/ Millwright)
* 2 years experience in a Manufacturing environment
* N4 – N6 Technical qualification will be advantageous
* Experience in an FMCG environment will be advantageous
* Working experience with high speed bottling machinery a distinct advantage
* Labelling experience advantageous
* Ability to work accurately and according to precise measurements and specifications
* Competent in turning, milling, argon and arc welding
* Competent in pneumatics and hydraulics
* Reflect good leadership behaviour - towards colleagues, superior and company values
* Able to do in depth problem solving and fault finding
* Able to cope with the inherent physical demands of the position
* Able to work shifts, on weekends and flexible hours
* Have reliable transport to and from work
*Qualification required:*
* N3 equivalent Mechanical qualification (NQF 4), Mechanical Trade (Fitter/ Turner/ Millwright)
Market Related
*The successful candidate must preferably have the following experience/skills:*
* N3 equivalent Mechanical qualification (NQF 4), Mechanical Trade (Fitter/ Turner/ Millwright)
* 2 years experience in a Manufacturing environment
* N4 – N6 Technical qualification will be advantageous
* Experience in an FMCG environment will be advantageous
* Working experience with high speed bottling machinery a distinct advantage
* Labelling experience advantageous
* Ability to work accurately and according to precise measurements and specifications
* Competent in turning, milling, argon and arc welding
* Competent in pneumatics and hydraulics
* Reflect good leadership behaviour - towards colleagues, superior and company values
* Able to do in depth problem solving and fault finding
* Able to cope with the inherent physical demands of the position
* Able to work shifts, on weekends and flexible hours
* Have reliable transport to and from work
*Qualification required:*
* N3 equivalent Mechanical qualification (NQF 4), Mechanical Trade (Fitter/ Turner/ Millwright)
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI0NzI2X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1185916&xid=1555_24726
.special-hidden
{
display: none;
}
2y
Save this search and get notified
when new items are posted!