Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Suggested
Results for welding jobs in Jobs in Mpumalanga
1
SavedSave
Requirements: Qualified MechanicMinimum of 2 years as a Motobike MechanicComputer Literate i.e MS OfficeDrivers licenseDismantle engines and repair or replace defective parts, such as magnetos, carburetors, and generators.Remove cylinder heads, grind valves, and scrape off carbon, and replace defective valves, pistons, cylinders and rings, using hand tools and power tools.Hammer out dents and bends in frames, weld tears and breaks; then reassemble frames and reinstall engines.Repair or replace other parts, such as headlights, horns, handlebar controls, gasoline and oil tanks, starters, and mufflers.Repair and adjust motorcycle subassemblies such as forks, transmissions, brakes, and drive chains, according to specifications.Replace defective parts, using hand tools, arbor presses, flexible power presses, or power tools.Reassemble and test subassembly units.Disassemble subassembly units and examine condition, movement or alignment of parts visually or using gauges.Please
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzgxMzcxX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1209863&xid=1109_81371
2y
1
SavedSave
Minimum requirements: Trade will be beneficialRepairs and service of all mechanical machinery, irrigators, trailers, water pumps etc.Responsible for all production, storage facility and the workshopWelding experience will be an advantageManagement and planning of all budgets, workshop activities, coordinating etc. within the workshopApplying health and safety policies and providing suitable training to employees Must have a valid drivers license Consultant: Anneke Kotze - Dante Personnel Mpumalanga
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzQ0NTgwX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1139919&xid=1108_44580
2y
1
SavedSave
Manganese Metal Company (“MMC”), based in Mbombela (Nelspruit, Mpumalanga Province), is the world’s largest producer of 99.9% electrolytic manganese metal (“EMM”). The company has been in operation since 1974, has a unique global marketing network and is a niche market supplier of EMM to an established international customer base.
We supply more than 120 customers in over 20 countries and our systems, equipment, safe operating philosophy and excellent business practices provide our customers with peace of mind, first-class quality and reliable supply. Our products are used in the top-end of the market, in the aluminium, steel, non-ferrous alloys, rechargeable lithium-ion batteries, chemicals and welding consumable industries.
*VACANCY: ENGINEERING ASSISTANT MECHANICAL X 2*
*MAIN PURPOSE OF THE JOB*
The job incumbent will be responsible for the safely carrying out preventive maintenance and repairs on equipment and installation work when required in line with documented work instructions.
*BACKGROUND INFORMATION REGARDING THE JOB*
In this position, the job incumbent will be part of the solution preparation wet engineering team. At MMC, the solution preparation wet engineering team performs the value-add activities of the process to ensure the solution is prepared and ready for electroplating in the cell house. The incumbent’s role is a key function to this team, as the person will be responsible for the smooth operation of the solution preparation wet section with specific attention required on thickeners, gearboxes, conveyor belting, filters, storage vessels, air, water and solution reticulation, centrifugal and mono pumps.
The equipment operates on a 24hr/365day basis. Success in this role happens through effective utilisation of staff and equipment in the working environment. Fitting and safety related tasks will form part of your daily work. Work planning will be part of duty and consist of regular shuts on equipment. MMC’s engineering team offers a very dynamic working environment, where the person will be part of the daily excitement of delivering the world’s highest quality EMM to customers all over the world, directly from Mbombela (Nelspruit).
* N3/ Matric with Maths and Science
* 1 years’ experience in a mechanical environment
* Computer Literacy (Basic)
*Competencies*
* Reliability
* Communicating
* Manually Capable
* Cost Conscious
* Quality Conscious
* Technically capable
* Team working
* Safety Conscious
* Perform the job as outlined in the work order and as per the detailed task list.
* Complete Work Order on ONKEY with the correct time and all details to the required standard.
* Provide feedback and recommendations to the maintenance Supervisor/Foreman on short comings, defects, further maintenance required to restore equipment to original safe operating conditions and on any task where there is a difference between the task instructions and the job requirements.
* Request con
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzEwMTAyX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1139629&xid=1555_10102
2y
Ads in other locations
10
WE SPECIALIZED IN DECKING, CLADDING, PERGOLAS AND WELDING WORKS
2h
2
SavedSave
Looking for an Experienced Workshop Fitter & Turner to join our team.Must be excellent in the following:*Fitting and Turning on mill and lathe- a MUST*Hydraulics and Pneumatics- a MUST *Welding-Optional *Working on Hydraulic Cylinders & Hydraulic equipment will be an advantageous Please send CV's urgently
3h
SavedSave
Vacancy
– Workshop Foreman
Engineering company, mainly in the automotive industry, are
seeking to fill the vacancy for a workshop foreman. Work consists of mainly
manufacturing in mild steel and stainless steel.
Duties:
-
Plan and manage jobs for the day/week so that it
is completed efficiently.
-
Delegate and assign work to workshop employees.
-
Maintain discipline in the workplace.
-
Timekeeping (or delegating it) efficiently.
-
Ensure that all employees work in a safe manner.
-
Be responsible for the quality each step of the
manufacturing process.
Requirements:
-
Artisan skills. Qualifications and experience
will be an advantage.
-
Able to read drawings.
-
Strong leadership skills. Past experience of
leadership positions essential.
-
Able to work both alone and within a group.
-
Good communication ability, both to management
and employees.
-
Minimum of 5 years experience in manufacturing
and/or engineering.
Having a driver’s license is not strictly required, but will
be advantageous. General engineering work experience, especially if it involves
Mig and/or Tig welding, will also be an advantage.
Salary dependent on qualifications and experience. If interested, send your CV to wallyjonck@gmail.com
7h
1
*Reference: PE000790-MVDM-1*
Our client is seeking a Sheet Metal Fabricator to join their team.
Open position : Sheet Metal Fabricator
Location : Port Elizabeth
Salary : Market related
Type : Contract position
Job requirements :
* Relevant mechanical engineering qualification beneficial
* Previous work experience as a metal fabricator.
* Certification and advanced welding experience.
* Advanced knowledge of engineering design and manufacturing procedures.
* Ability to read and interpret technical drawings.
* Proficiency with metal fabrication tools including shears, rollers, and drill presses.
* Advanced mathematical and engineering skills.
* Ability to lift and manipulate large metal objects.
Duties :
* Reading and interpreting drawings
* Constructing base templates if necessary.
* Measuring and marking out cutting and bending lines.
* Setting up metalwork machinery including rollers, drill presses, brakes, and shears.
* Double-checking design specifications before commencing with cutting work.
* Fabricating and constructing metal components.
* Grinding and finishing completed products.
* Performing quality checks on completed products.
* Conforming with state and company safety regulations.
* Completing job reports.
Should you meet the above job requirements, please email your CV to (jason@zwanda.co.za)(mailto:jason@zwanda.co.za)
Please add “Sheet Metal Fabricator” to the subject line of your email.
No reply after 2 weeks indicates that you have been unsuccessful.
R
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzU0MjMxX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1241612&xid=1555_54231
2y
1
SavedSave
Welders needed for a 1 month Contract in Boksburg
*THIS IS A 1 MONTH CONTRACT !!!*
Welding with MIG and MAG doing CLADDING.
Must be Trade Tested.
Trade Test
R130.00 to R150.00 per hour depending expereince.
Trade Test
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzU0MjQzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1241621&xid=1555_54243
2y
1
SavedSave
Clifford Machines & Technology provides industrial welding, grating and wire working equipment. For over 50 years, Clifford has been a leader in their field and we are looking for a new addition to our Design Team.
If you have experience in the machine building industry, we want to hear from you. Read further or visit (www.cliffeng.com)(https://www.cliffeng.com) for further details.
*
* Design of automated machinery using 3D CAD (Solidworks) from conception through to issuing of manufacturing drawings.
* Attention to detail and the ability to complete a job 100% accurately is a key requirement.
* Candidate must have the ability to do new concept creation quickly, using hand sketches, white board drawings or other means to capture and scale design intent quickly.
* Research of components, materials, and processes to enhance machine designs and efficiency.
* Working to business systems in line with ISO9001.
* Contact suppliers for availability of components to ensure kitting schedules are met.
* Place POR’s when necessary.
* Machine building and assembly of parts when necessary.
* Site commissioning if required.
* Project management.
* Willing to travel internationally.
*
* Must have 5 years of CAD 3D (Solidworks or similar 3D) design experience – Design, Assembly and Drafting of complex assemblies.
* Knowledge and use of PDM/PLM systems would be advantageous.
* A tertiary technical qualification would be advantageous buy not compulsory.
* Proficient in MS Word, Excel and Outlook.
* Excellent verbal and written communication skills.
Negotiable for the right candidate
*
* Must have 5 years of CAD 3D (Solidworks or similar 3D) design experience – Design, Assembly and Drafting of complex assemblies.
* Knowledge and use of PDM/PLM systems would be advantageous.
* A tertiary technical qualification would be advantageous buy not compulsory.
* Proficient in MS Word, Excel and Outlook.
* Excellent verbal and written communication skills.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzUzMjUxX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1241064&xid=1555_53251
2y
1
SavedSave
Welding with MIG and MAG doing CLADDING.Must be Trade Tested. Desired Experience & Qualification Trade Test Package & Remuneration R130.00 to R150.00 per hour depending expereince.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzkzODAyX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1240441&xid=1109_93802
2y
1
SavedSave
Reference: JC52256
Our client who specializes in automotive components is seeking a fitter and turner within the Port Elizabeth region
Duties include, but are not limited to:
* Must run a shift on his own.
* Must work shifts and overtime as required
* Assist the EMSEC GOLDWING in maintaining machine safety and meet deadline as required
* Do fault finding and repairs on machines.
* Ensure that TPM2 are done correctly and on time.
* Must be competent in hydraulics and pneumatics.
* Be able to do minor welding repairs.
* Be actively involve with continuous improvement of machinery.
* Be involved with apprentice training.
* Be able to do pipe fitting.
* Assist with projects.
* Must be able to work under minimum supervision.
* Ensure that minimum stock levels on critical spares are kept intact.
* Be able to do minor machining. (milling, grinding, turning)
* Be involve with machine upgrades.
Position requirements as follows:
* Education/Experience:
Trade tested artisan (Fitter Trade) with at least 5 years related experience in areas such as Preventative maintenance, machine breakdowns and safety systems. Must have a sound working knowledge of Hydraulics and Pneumatics.
* Reasoning Ability:
Ability to work as a team member, under pressure with good organizational skills and problem-solving capabilities.
* Computer Skills:
To perform this job successfully, an individual should be computer literate in MS Word and MS Excel.
Position requirements as follows:
* Education/Experience:
Trade tested artisan (Fitter Trade) with at least 5 years related experience in areas such as Preventative maintenance, machine breakdowns and safety systems. Must have a sound working knowledge of Hydraulics and Pneumatics.
* Reasoning Ability:
Ability to work as a team member, under pressure with good organizational skills and problem-solving capabilities.
* Computer Skills:
To perform this job successfully, an individual should be computer literate in MS Word and MS Excel.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI1MTY1X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1187491&xid=1555_25165
2y
1
SavedSave
Regional Branch Manager (Northern Cape and Bloemfontein)
Our client, a leader in the Plant and tool Hire industry is looking for a Branch Manager take responsibility for the Northern Cape and Bloemfontein area. The successful candidate will have minimum 7yrs in similar a role.
JOB PURPOSE
* Directing all operational aspects including Debtors/Creditors, Health and safety, Gas rentals, Equipment Rental Hire, Stores and Stock Management, customer service, Human Resources administration, Payroll and administration.
* Skills Development - Providing training, coaching, development and motivation for personnel
* Accounting duties - Developing forecasts, financial objectives and business plans
* Sales
* The employee must provide complete and appropriate solutions for every customer in order to boost tip-line revenue growth, customer acquisition levels and profitability.
KEY PERFORMANCE AREAS
* Sales and Branch Targets
* Managing
* Operations
* Human Resource Finance
* Logistics
* General Management
Qualifications and Experience:
* Matric
* Related tertiary qualification
* 7yrs minimum experience in similar position
* Welding/Tools/Generators knowledge will be advantageous
*Desired Skills: *
* Welding
* Tools
* Generators
* Management
* Sales
* Branch Targets
* Targets
* Operations Management
* Human Resources
* Finance
* Budgets
* Logistics
* General Management
*Desired Work Experience: *
* 5 to 10 years
*Desired Qualification Level: *
* Diploma
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU0Xzk3NjZfXzQ5Nz91dG1fc291cmNlPWd1bXRyZWUmdXRtX21lZGl1bT1mZWVkJmtleXdvcmQ9&jid=1183210&xid=1554_9766
2y
1
*Purpose*
Set up and operate a variety of machine to produce Valve parts. Includes precision machining in the fabrication, modify, or repair of any valves. May also fabricate and modify parts to make or repair valves as and when require. Also, require applying knowledge of mechanics, shop mathematics, metal properties, layout, and machining procedures.
* Calculate dimensions and tolerances using knowledge of mathematics and instruments such as micrometers and Vernier calipers.
* Machine parts to specification.
* Measure, examine, and test completed units to detect defects and ensure conformance to specifications, using precision instruments such as micrometers.
* Set up, adjust, and operate all the basic machine tools and many specialized or advanced variation tools to perform precision machining operations.
* Align and secure holding fixtures, cutting tools, attachments, accessories, and materials onto machines.
* Monitor the feed and speed of machines during the machining process
* Make use of drawings, and engineering information to determine methods and sequences of operations needed to fabricate products and determine product dimensions and tolerances.
* Select the appropriate tools, machines, and materials to be used in preparation of machinery work.
* Lay out, measure, and mark metal items to machine work pieces.
* Observe and listen to operating machines or equipment to diagnose machine malfunctions and to determine need for adjustments or repairs.
* Check workpieces to ensure that they are properly lubricated and cooled.
* Position and fasten workpieces.
* Operate equipment to verify operational efficiency.
* Clean and lubricate machines, tools, and equipment to remove grease, rust, stains, and foreign matter.
* Confer with engineering, supervisory, and manufacturing personnel to exchange technical information.
* Establish work procedures for the fabricating of new items needed to construct a valve.
* Evaluate procedures and recommend changes or modifications for improved efficiency and adaptability to setup and production.
* Set up and prepare work pieces for brazing, heat-treating, and welding.
*Requirements:*
* Grade 10+
* Or Trade tested
* 3 years’ post apprentice experience
*SKILLS AND EXPERIENCE*
Working experience on different types of Boring Mills.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU0Xzk4MjJfXzQ5Nz91dG1fc291cmNlPWd1bXRyZWUmdXRtX21lZGl1bT1mZWVkJmtleXdvcmQ9&jid=1184337&xid=1554_9822
2y
1
SavedSave
Our client, a Stikland-based company, is looking to hire Assistant Operators for a current project (contract position).
Apply today if you are willing to work 12-hour shifts, including nights and weekends, and you have a Matric certificate with at least one-year of work experience.
STRICT REQUIREMENTS:
• Completed Grade 12 / Matric Certificate (certificate will be requested).
• Machine operating experience.
• Welding experience (Advantageous)
• Forklift license is beneficial.
• Must be hardworking and dedicated.
• Ability and willingness to work 12-hour shifts, including night shifts and weekends.
• Clean criminal record.
HOW TO APPLY: Send your CV and all documents to liza-nelle@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.Job Reference #: AsssitOP/NSConsultant Name: Liza-Nelle Swanepoel
1d
1
SavedSave
Our client based in the Northern Suburbs is seeking to employ Welders that is available immediately.
If you have a Matric certificate and at least one years working experience with welding.
STRICT REQUIREMENTS:
• Machine operating experience.
• Welding experience (Arc / Mig / Stick)
• Must be hardworking and dedicated.
• Fabrication experience is beneficial
• Ability and willingness to work 12-hour shifts, including nightshifts and weekends.
• Clear criminal record.
TO APPLY: Send your CV and all documents to liza-nelle@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.Job Reference #: Welding/NSConsultant Name: Liza-Nelle Swanepoel
1d
1
SavedSave
Our client based in the Northern Suburbs; Cape Town is seeking to employ a Fabricator/ Manufacturer to join their team.
Requirements:
·Grade 12 / Senior Certificate
·Completed a Welding short course or certificate.
·Welding experience is a must (Arc / Mig / Tig / Stick).
·Fabrication experience is a must.
·Must be hardworking and dedicated.
·Must be available immediately.
·Worked in a manufacturing / factory environment before.
Please forward your CV to reception@personastaff.co.za
Please note that only shortlisted candidates that meet the requirements will be contacted. If you have not been contacted within 48hours, your application is unsuccessful.
Persona Staff (Pty) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
reception@personastaff.co.za
1d
1
SavedSave
EXPERIENCE IN WELDING WITH ALUMINIUM
EXPERIENCE WORKING IN ALUMINIUM COMPANY /COMPANIES
LOOKING FOR DEDICATED AND HONEST EMPLOYEES
Responsibility:REPAIRS AND MAINTAIN ALUMINIUM PRODUCTS
ARRANGE THE DELIVERY OF FINISHED OR ASSEMBLED PRODUCT.
INSTALLING WITH OTHER FACADE MATERIAL REQIREMENTS
NEED WELDING SKILLS
ABILITY TO WORK WITH METAL SHEETS
ABILITY TO SCREW OR WELD ALUMINIUM
CUTTING , MARKING OUT SHAPING , FORMING , INSTALLING ALUMINIUM DOORS ,WINDOWS , GATES
Job Reference #: GENERALConsultant Name: Renel Pillay
1d
1
SavedSave
* Must be Qualified Welder (Red Seal)* MINIMUM 5-8 Years experience as a WelderDuties & ResponsibilitiesSCH Pipe schedule - wall thickness series for the steel pipe in the same diameter 40SExperience: Weights of pipe, XXS - double extra strong wallStainless steel welding experienceISO 128 international standard (ISO), general principles of presentation in technical drawings, specifically the graphical representation of objects on technical drawings.Have to pass the relevant welding tests as required by ISO before employment will be considered.Good communication skills.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzE4Mjk3OV9fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1776280&xid=1109_182979
1d
1
SavedSave
* Must be Qualified Fitter/Hydraulic Fitter (Red Seal)* MINIMUM 5-8 Years experience as a HYDRAULIC FITTERDuties & ResponsibilitiesBoilermaking experience, but qualification not needed. (Semi-skilled)Measuring and marking pipes for cutting and threading.Assembling and welding pipe components and systems.Place new parts into equipment and ensure the machinery is working effectively.Securing pipes to walls and fixtures with brackets, clamps, and welding equipment.Ordering required materials such as pipes, hangars, brackets, hydraulic cylinders, etc.Meet the exact specifications of technical drawings, able to read and interpret technical drawings.Good communication skills.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzE4Mjk3OF9fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1776276&xid=1109_182978
1d
1
SavedSave
Our client, who is based in the Northern Suburbs, is needing Welders who can start working right away.
If you have a matric certificate and at least one years working experience with welding or semi-skilled Boiler making, then apply today.
STRICT REQUIREMENTS:
• Machine operating experience.
• Welding experience (Arc / Mig / Stick)
• A forklift license is beneficial.
• Must be hardworking and dedicated.
• Fabrication experience is beneficial
• Ability and willingness to work 12-hour shifts, including night shifts and weekends.
• Clear criminal record.
TO APPLY: Send your CV and all documents to liza-nelle@personastaff.co.za or phone 021 975 8297 for more information.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.Job Reference #: Weld/NSConsultant Name: Liza-Nelle Swanepoel
1d
Save this search and get notified
when new items are posted!