Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Suggested
Results for mechanic in Jobs in Graaff-Reinet
1
Our client, a market leader in the South African Pet Food Industry, is looking for an experienced and trade tested Fitter, (Day Shift) in their Engineering Department, in Graaff Reinet, Eastern Cape.
*Requirements:*
* Qualified Artisan (Pref Red Seal) with a minimum of 4-5 years' experience after trade test in a continuous manufacturing/FMCG environment in maintenance of heavy machinery
* Preferable red seal
* Valid drivers licence a must
* Standby experience.
* Ability to work independently without supervision.
* Reliable and trustworthy
*Essential Functions:*
Essential responsibilities include but are not limited to:
* Operating hydraulic and pneumatic pumps, chain conveyors, V belts, Chain drives, boiler/ steam, fans.
* Firsthand experience in welding, cutting, and grinding.
* Understanding of Milling and Lathes machines.
* Performing Fault Finding.
* Minimising downtime and breakdowns of equipment by conducting breakdown repair work on all plant equipment.
* Installation and repair of fans, valves, bearings, mechanical seals, pumps, etcetera.
* Execution of modifications and projects.
Salary on offer is R15 000 basic per month, dependent on experience and will include Sanlam provident fund, membership to Momentum Health4Me medical insurance which is covered by the employer and a discretionary bonus.
Fitter, Artisan, FMCG, Miling, Lathe, Grinding, Welding
Fitter, Artisan, FMCG, Miling, Lathe, Grinding, Welding
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI5MDUzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1199579&xid=1555_29053
.special-hidden
{
display: none;
}
2y
Ads in other locations
1
Overview:The position of general manager consists of planning, directing, or coordinating the operations of companies under the Group Holdings. The General Manager reports directly to the CEO and collaborates closely with the senior leadership team, Customers, Suppliers, and stakeholders. This is a full-time executive-level position with flexible working hours. The General Manager is based onsite at the corporate office. Occasional travel may be required for meetings, conferences, or business-related activities. Minimum Requirements:Grade 12/ MatricBachelor's degree in business administration, management, or a related field is a plus15 + years’ experience in mechanical, electrical, or electronic manufacturingProven experience as a Division Manager, Operations Manager, or in a similar executive leadership role Responsibilities:Oversee and manage cross-functional departments, including operations, finance, human resources, and technology, to ensure effective collaboration and performanceCollaborate with the CEO and senior team to set performance goals, establish metrics, and monitor key performance indicators (KPIs) to measure the company's progress and successMonitor and analyze key performance indicators (KPIs), financial data, and operational metrics to measure performance and identify areas for improvementCollaborate with department heads to set performance goals, establish targets, and ensure alignment with the company's vision and objectivesOversee budgeting, financial planning, and resource allocation to optimize cost management and achieve financial targetsDetermine staffing requirements, and interview, hire and train new employees, or oversee those personnel processesDirect and coordinate activities of businesses or departments concerned with the production, pricing, distribution or importing of productsDirect and coordinate organization's financial and budget activities to fund operations, maximize investments, and increase efficiencyOverseeing plant maintenance and reducing wasteful expenditureEnsuring acceptable levels of efficiency and staff productivityManaging stock levels both raw materials and finished goodsEstablish and implement departmental policies, goals, objectives, and procedures, conferring with CEO, organization officials, and staff members as necessaryLocate, select, and procure merchandise for resale, representing management in purchase negotiationsManage staff, prepare work schedules and assign specific dutiesOversee activities directly related to making products or providing servicesPlan and direct activities such as sales promotions and coordinate with other department heads as requiredReview financial statements, sales and activity reports, and other performance data to measure productivity and goal achievement and to determine areas needing cost reduction and program improvementCollaborate with the executive leadership team to report on business performance, share insights, and propose strategic recommendations Key
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzE4NTEyOF9fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1794909&xid=1108_185128
.special-hidden
{
display: none;
}
4h
1
PRODUCTION ENGINEER/ EAST LONDON Main job purpose: Responsible for monitoring and improving manufacturing and Engineering processes by detecting and reducing waste in the manufacturing area in order to optimize production through continuous process improvement.Critical requirements;Grade 12National Diploma in Engineering (Chemical, Industrial, Mechanical or Analytical Chemistry) or Plastic Injection/Extrusion experience3 years production and/ or engineering experience3 years ManufacturingWorking knowledge in analytical fault detectionPlastic Extruder/Injection or similarSound working knowledge of SPC, FMEA, SOP’s,Communication Skills (Verbal and written)Interpersonal SkillsMS OfficeProblem Solving TechniquesAnalytical Skills Main ObjectiveTo reduce waste and optimize production through continuous investigation, analysis and problem solving relevant to applicable processes and machines within in the area in order to minimize downtime.Responsible for developing and up skilling Production personnel in line with process requirements to ensure that production is enabled to conduct their tasks efficiently and effectively and waste is kept to a minimum.Responsible for establishing fault identification and problem solving in order to take timorous and effective corrective actions and to keep downtime to a minimum.Responsible for ensuring that Work Instructions, procedures and processes are standardized across all shifts in line with legal, production and environmental standards, so as to ensure zero findings during audits.To support R&D and process requirements for each new product according to project plan and specifications whilst ensuring that waste are maintained or improved upon.To effectively communicate with stakeholders to ensure that changes, concerns and learnings are effectively communicated to facilitate process understanding and minimize risk.To Manage Production staff to achieve targetsMaintaining staff safety/training documentsSalary – Negotiable depending on experienceApplication Process:
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzE4NDgxOV9fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1794462&xid=1108_184819
.special-hidden
{
display: none;
}
5h
1
Instructional Offerings:• Mathematics N3.• Engineering Mathematics N4 – N6.• Engineering Science N3 – N4.• Engineering Drawing N3.• Industrial Electronics N3 – N4• Electrotechnics N3 – N4• Mechanical Draughting N4.• Power Machines N5 – N6.Requirements:• National Diploma/Bachelor’s degree in manufacturing, Electrical or Mechanical Engineering.• A minimum of 1 year of relevant, lecturing/industry experience.• Management and Teaching in the tertiary environment (preferably FET College)• Computer literacy is essential, especially in MS Outlook, MS Word, and MS Excel.• Curriculum and assessment knowledge.• Demonstrate a history of student throughput, pass rate, and understanding.Duties and responsibilitiesTutors are responsible for leading one-on-one or small group lessons that cater to the needs and goals of their students. This position entails the following responsibilities:• Offer academic and educational leadership.• Assisting students with homework, test preparation, papers, and other academic tasks.• Working with students to help them understand key concepts, especially those learned in the classroom.• Participate in and manage all other related teaching responsibilities.• Teaching skills to improve academic performance, including study strategies, note-taking skills, and approaches to answering test questions• Developing and distributing teaching materials to supplement classroom lessons, including study guides• Conducting practice tests to track progress, identify areas of improvement, and help set goals for examination preparation.• Providing positive and constructive feedback to students• Building meaningful connections with students from diverse backgrounds.• Diagnosing student needs through active listening techniques and questioning strategies• Recognizing different learning styles and student preferences.• Designing differentiated learning goals.• Staying up to date with the NATED curriculum.Skills:• An in-depth understanding of a specific academic topic or significant test preparation experience. • Strong communication skills to explain challenging concepts, give instructions, and provide feedback clearly. • Effective goal-setting strategies for motivating and encouraging students to improve their academic performance • Flexible and creative learning approach to tailor learning to individual students. • A patient and compassionate attitude towards students as they develop skills and improve their performance. • Demonstrated academic excellence.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzE4NDU3MV9fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1793959&xid=1108_184571
.special-hidden
{
display: none;
}
5h
1
Internal Auditor required for a reputable automotive manufacturing company based in East London, Eastern Cape Requirements:Minimum requirements: National Diploma in Mechanical Engineering / BTech Quality ManagementVDA – QMC – certified, VDA6.3 Auditor, Core Tools VDA-QMC & ISO 19011 knowledge as well as VDA 6.5At least 5 years Quality Assurance experience in the Automotive manufacturing sector with a proven track recordQualifications on ISO9001; IATF16949 standards and VDA6.3 Process AuditorFully conversant in G8D, APQP, PPAP, PSW, FMEA & Control PlansProduct Safety & Conformity Representative (PSCR)Ability to interpret engineering drawingsKnowledge of CMM gages and fixturesKnowledge of Measurement System AnalysisStrong analytical, problem-solving and decision-making abilitiesSound technical capabilities and understandingComputer literacy in MS OfficeExcellent communication and interpersonal skillsAbility to work in a team Responsibilities: Conducting internal and supplier process audits according to VDA6.3 Process AuditConduct internal audits system and process audits as per audit schedulePrepare for external system audits including IATF16949Prepare for external customer process audits VDA6.3Close out all audit findings within the stipulated time frames (i.e. internal process / supplier customer / system)Maintain the Quality Management SystemConducting customer product & dock audits according to customer specific requirements (VDA 6.5)Implement and manage the Layered Audit processParticipate in continuous improvement initiativesShould you wish to apply please email your CV through to Kerry O’Hagan at
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzE4NDU1OV9fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1793947&xid=1108_184559
.special-hidden
{
display: none;
}
5h
1
Auto electrical experience on Earthmoving equipment + 5 years earth moving mechanical experienceMust have worked as a Field Service TechnicianReporting to the Technical Support Manager, the technician performs tasks in the electrical andmechanical field including Maintenance, Servicing, Component change out, Repairs, Rebuilds and Troubleshooting on related Earthmoving equipmentFacilitates efficient technical, engineering and after-sales service to customersDiagnoses, overhauls, repairs, tunes, maintains and service diesel powered Earthmovingequipment and machinery in the field as well as in the workshopPrepares and submits detailed field reportsMaintain professional customer relationshipsDetects electrical and mechanical faults by using specialized tooling and equipmentRepairs and maintains electrical, hydraulic and mechanical components and systems of diesel-powered equipment including attachments.Follows work assignments received in the form of general oral or written work instructionsDetermines the extent of the needed repair and determines the nature thereof and implementPerform checks and services on a regular basis and detects possible faults and flaws on affected equipmentRepairs and/or replaces and fit new sections or new partsImprovises necessary solutions as and when neededTravels from one site to another often in remote areas and at unusual work hoursWorks with specialized equipment in order to perform daily duty requirementMaintains a good level of physical health and fitnessMaintains a legal vehicle drivers license at all timesAdheres to all health and safety legislationProduct Support FunctionMaintaining punctual and high-quality paperwork / reportsAnalytical and problem solverSafety and Security - Observes safety and security proceduresTime management
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzE4NzY4NF9fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1792694&xid=1109_187684
.special-hidden
{
display: none;
}
6h
Qualified
Diesel Mechanic required.
The successful
applicant will be responsible for services and maintenance of trucks and buses.
Duties & Responsibilities
·
Vehicle Inspections and
General Repairs
·
Ensure all vehicle
detail is accurately recorded on the job card system.
·
Ensure defects are
comprehensively recorded on the job card system.
·
Comply with all company
policies and procedures regarding inspection sheets.
·
Ensure all special tools
and equipment is available and in working conditions.
·
Job Cards - Complete all
related faults identified.
·
Log
all other identified faults found on vehicle.
·
Ensure post-repair check-lists are done.
·
Ensure safety is managed at all breakdowns.
·
Manage any breakdown from call received to solution
implemented.
·
Ensure problem is analyzed and probable causes identified.
·
Complete all relevant documentation with breakdown
information.
Desired Experience & Qualification
·
Requirements specific to the job
·
Qualifications: •
Grade 12 • Code EC license
·
Trade Test Certificate (Must be a qualified Diesel Mechanic)
·
Experience: Min 4-7 years’ work experience (POST
APPRENTICESHIP AND TRADE COMPLETION)
Knowledge /
Abilities:
·
Able to work independently as well as in a team
·
Able to focus and provide work of an extremely high quality
·
Able to perform after hours breakdown on a rotational basis
Skills
·
Planning and organizing
·
Reliable and honest
Other
·
You may be
required to perform other or general work due to operational requirements, for which
you are either qualified and/or capable of doing so, or any duties that may be
reasonably expected of youEmail CV to vacancies4u2024@gmail.com
17h
1
DescriptionTo plan, define, coordinate and be accountable for Quality audits and inspections in Press, Body, Paint and Assembly shops.To maintain and improve product surface quality and mechanical joints by monitoring and reporting on nonconformances and processes.To drive product improvements based on top faults detected by investigating route causes and initiating corrective actions to meet Konzern Quality standards and provide continuous improvements.Duties:Establishing root causes and implement corrective actions for allocated quality problems.Interfacing with various departments within the Group.Present findings/reports at various forumsLiaising with overseas counterparts with regard to build/quality mattersCo-ordinate and be accountable for Quality issues.Lead cross functional teams when required.Monitor and reporting of non-conformances and processes and initiating corrective actions to drive early detection.Qualification requirementsHave National Diploma or Degree in Chemistry/Polymer/Mechanical EngineeringPreference : BSc Degree /B-Tech Chemistry or PolymerExperience Required:Have 3 -5 years experience within the manufacturing industry.Essentials:Have good report writing and presentation skillsHave proven analytical and problem solving skillsKnowledge of Body and Paint Shop production processesSound knowledge of colouristics of colour management to analyze and interpret resultsSound knowledge of paint processes and corrosion preventionBe computer literate in MS Office (Excel, PowerPoint, Word)Be assertive and have the ability to motivateBe a team player and be able to work under pressureAdded Advantage:Ability to communicate fluently in German (verbally and written)Experience in automotive process material application
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzE4NTA0OV9fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1794657&xid=1108_185049
.special-hidden
{
display: none;
}
1d
1
Our client, in the Manufacturing industry, is seeking a Mechanical Engineering OR Industrial Engineering Intern to join their team, based in East London for a 1-year contract.Minimum Requirements:-Relevant Tertiary QualificationNo previous working experience requiredTo start ASAP
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzE4NTAxN19fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1794528&xid=1108_185017
.special-hidden
{
display: none;
}
1d
1
GENERATOR TECHNICIAN (DIESEL MECHANIC / EAST LONDON – This role requires a lot of out-of-town travel to Mthatha, Butterworth and Eastern Cape surrounds, applicants must be flexible, willing to travel, and of sober habits. After hour call outs will also be required. Valid Code 08 Drivers license is required for this position.
The purpose of this role is to ensure the proper functioning, maintenance, repair, and installation of generators. The successful Candidate will play a crucial role in various industries and settings where reliable backup power is essential, such as hospitals, data centres and manufacturing plants
Minimum Requirements
Matric, Grade 12 or equivalent qualification
Trade Test qualification will receive preference
Minimum 3 years’ experience working on Generators
Physically fit with good energy levels
Minimum Code 08 Driver’s license
Excellent work ethic – Positive attitude, honest, reliable, hardworking, dedicated and takes pride in work carried out, Team Player
Sober habits
Strong knowledge of Health & Safety
Responsibilities
Installation of Generators – Volvo Penta, Caterpillar, Deutz, Perkins
Maintenance – routine maintenance tasks, inspecting and replacing filters, checking fluid levels, cleaning components, preventative maintenance
Repairs – Diagnosing faults, troubleshooting issues, perform necessary repairs to restore the generator to working condition i.e.: replacing components such as engines, alternators, fuel systems, control panels and electrical wiring.
Testing and commissioning – Load testing, voltage regulation testing, frequency testing and synchronization testing to ensure the generator can handle the required load
Emergency Response – Call outs on a roster basis to troubleshoot and repair generator issues to restore power as soon as possible, this requires the ability to work efficiently under pressure and prioritize tasks to minimize downtime.
Documentation and reporting – maintaining accurate records of maintenance activities, repairs and service history for each generator.
Compliance – ensure that generators comply with all relevant safety and regulatory standards, performing inspections, conducting tests and implementing necessary modifications or upgrades to meeting compliance regulations.
Salary – market related depending on experience
Application Process: Online applications will receive preference, ensure you upload a head and shoulder photo, alternatively e-mail CV with a recent head and shoulders photo to solutions@workafrica.co.za, ensure you use "GENERATOR TECHNICIAN" as a reference in the subject field. Please deem your application as unsuccessful if you receive no feedback after 3 weeks
Job Reference #: GeneratorTechConsultant Name: Claire O'Reilly
13d
1
DIESEL TECHNICIAN – SEMI-SKILLED / EAST LONDON
Semi-skilled, NOT Trade Test qualified Diesel Technician required. MUST have experience working on Diesel trucks, Trailers and (Forklifts – advantageous). Must have at least Code 08 License (Code 10 or 14 preferable)
Minimum Requirements
Matric, Grade 12 or equivalent qualification
Must be able to write and speak English
Physically fit with good energy levels
Excellent work ethic – honest, reliable, hardworking, dedicated and takes pride in work carried out
Ensure OHSACT requirements are met
Team Player
Hours of work – Monday to Friday – 07h00am – 17h00pm; On Stand-by every second week;
Work every 2nd Saturday morning for +- 3 hours (overtime paid)
Salary – market related
Application Process: Online applications will receive preference, ensure you upload a head and shoulder photo, alternatively e-mail CV with a recent head and shoulders photo to solutions@workafrica.co.za, ensure you use "DIESEL TECHNICIAN SEMI-SKILLED" as a reference in the subject field. Please deem your application as unsuccessful if you receive no feedback after 3 weeksJob Reference #: DieselMechConsultant Name: Claire O'Reilly
13d
1
The purpose of this position is to maintain, service and repair material handling equipment, systems, and products on company premises or at customer sites in a timely and cost-effective manner so that customer and company requirements are met, maintaining of vehicle records.Key Performance Areas:Servicing of material handling equipment and maintaining forklift serviceability to specified standards and according to set procedures by delivering quality service / maintenance.Perform accurate diagnosis / troubleshooting in event of breakdown of equipment; communicate what repairs are needed by advising customer and/or supervisor.Maintains vehicle maintenance and operational data / history by updating and timeously communication information that must go on record.Promote service / maintenance programs.Provide complete customer satisfaction in a polite and professional manner.Ensure proper communication between self, workshop staff (Field Service Team Leader and Controller) and customer.Ensure OHSACT requirements are met in all actions on company and client premises; maintains a safe work environment by verifying vehicle safety device operations, following standards and procedures and in general complying with legal regulation.Updates job knowledge by participating in educational opportunities Required Minimum Knowledge, Skills Education / Training and Experience Requirement(s):Trade test certificate, mechanicCode 8 driver's licence (for field service technicians)Valid forklift operator licenceMatric, Grade 12 or equivalent qualificationQualified Diesel and/or Petrol Mechanic, plus experience with forklifts or similar material handling equipment; or Qualified Forklift MechanicMinimum of 3 - 5 years’ mechanical, hydraulic and electrical experience pertaining to forkliftsGeneral working knowledge of auto electrical systems (ignition, starting, charging, illumination)Dedication to service excellence in every aspect of work carried out; strong focus on attention to detail and accuracyExcellent communication skills with people at all levels in an organisation – must be able to converse fluently and comfortably in English; must be able to read and write EnglishAbility to understand and follow safety measures and precautionsAbility to interpret and apply technical informationAbility to read and interpret schematics, diagrams, operations manuals and manufacturer’s specificationsAbility to identify and correctly utilise relevant diagnostic equipment and specialised toolsWillingness and capability to continue learning and growing with new technology and modelsAbility to receive constructive criticismMaintain work area in clean and orderly conditionAbility to work under extreme pressureMust be of sober habits, have high energy levels and general good health – must be declared fit for physical performance requirements of these tasks - physically able to carry, lift, and move heavy objects; must be able to stand and sit for long periods of time; must be able to be
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzE4MzIwM19fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1791129&xid=1108_183203
.special-hidden
{
display: none;
}
3d
Qualified Diesel Mechanic requiredREQUIREMENTS:- Qualified with experience on heavy commercial vehicles essential (trucks and traler maintenance and construction equipment maintenance)- Valid drivers license - SA citizenship or valid work permit essential - Own reliable transport- Contactable referencesEmail your CV to infopiximanzi27@gmail.com or whatsapp on 072 776 5963
4d
1
We're looking for a candidate to fill this position in an exciting company.Responsibilities / Accountabilities: Knowledge and understanding of ISO 9000 / ISO 14000 / TS 16949Initiates measures to improve equipment performance, methods, and qualityManage all software and hardware installed on different types of continuous process equipment while ensuring minimal down times, proper documentation, and version controlProgram, Design using PLCs, HMI and SCADA while commissioning and overseeing the installation of equipmentAssists in creating, modifying, and revising automation controls instructions and process flow documentationAutomotive Assembly Process Knowledge and ExperienceAbility to read blueprints, AutoCAD, EPlan, interpret and modify electrical schematics6 Sigma Certified/TrainedPerforms other work-related duties as assignedPerformance measures/ success criteria: Improve Assembly equipment uptime using data analysis and preventative maintenance planningDevelop and implement short-, medium- and long-term improvement plans for implementation within the automated systemsTake responsibility for investigating and introducing new engineering technologies and strategiesUndertake root cause analysis and ensure Permanent Corrective Actions (PCA's) are implementedJob Qualification & Experience: Qualifications and experience:National Diploma: Electrical Engineering / Mechatronics3-5 Years PLC ExperienceMinimum of 2-3 years within the Automotive IndustryKnowledge, skills and abilities (KSA):Good behavioural and leadership skillsExcellent English Oral and Written communicationAbility To analyse and interpret data analysisGood teamwork AbilitySelf-Motivated And Results Driven IndividualRead mechanical and electronic schematics to ensure specifications, adherence to standards is metTroubleshoot equipment; manage calibration and preventative maintenance processes.Extensive knowledge of a variety of electronic and digital controls systems and experience to test and writes modifications in multiple languages of systems software (Siemens and Bosch/Rexroth).Strong understanding of networking, Ethernet, remote IO, ProfiBus and ProfiNetFault finding and continuous improvement execution and implementationEngine functionally knowledge beneficial
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18zMTdfMjAyNjQ2X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1226182&xid=317_202646
.special-hidden
{
display: none;
}
2y
1
Global Automotive company requires the technical skills of a trade tested, experienced Technical Specialist (Millwright) with 6 years experience within the automotive industry. You will be responsible for plant maintenance and breakdowns (mechanical and electrical) on a shift basis). Responsibilities: Investigate and solve maintenance issues and provide solutionsProvides support in troubleshooting equipment to ensure effective and efficient operationsRepairs equipment as necessaryPerform all requested tasks professionally and in a reasonable time frameCommunicate status of all maintenance activities and projects with managementInterpret work orders, job plans, drawings, technical specification and equipment/manufacturer manualsComplete all housekeeping assignmentsRequirements: Grade 12Millwright / Electrician trade test6 years automotive / manufacturing experience5-10 years experience within a similar role Pneumatic, hydraulic, gearbox drives and PLC experienceProven skills at cultivating strong working relationships and working well within a team to learn and share knowledgeShould you wish to apply please email your CV through to recruiter2@profilepersonnel.co.zaOnly shortlisted candidates will be contacted
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQ3NzA3X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1178967&xid=1266_47707
.special-hidden
{
display: none;
}
2y
1
Bachelors Degree or BTECH in Mechanical or Metallurgical Engineer2-3 years related technical sales experience in minerals processing equipment and mining environmentThe successful candidate will need to be energetic and have a passion for salesThey should be technically sound Have the ability to promote and generate new business from existing customers Grow the market share by providing value adding solutions to products and processes for our customersHigh level of computer literacy using Microsoft Office suite Increase sales of full range and increase process engineering services offered to customers making the branch a solutions providerProactive in seeking growth in all productsAlways adhere to all Safety Health Environment (SHE) and housekeeping requirements at the branch and customer sites
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzYyODY0X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1221273&xid=1108_62864
.special-hidden
{
display: none;
}
2y
1
East LondonMinimum requirements:Qualified electrician3-5 years of working experience in facilities maintenanceGood understanding of electrical, plumbing, and carpentryAbility to work with minimal supervisionMust demonstrate strong communication and interpersonal skillsMust be organized, detail oriented, self-motivated, and able to multi-taskRole requirements:Perform ongoing preventive maintenance and repair work on facility mechanical, electrical, and other installed systemsMaintain, operate all HVAC systems and associated equipment, electrical equipment, plumbing systems, building management system, and building repairsPerform facility inspections and report on condition affecting operationsPrepare and submit summary reports of conditions in buildings and recommend actions to be takenSupervise contractors for both facilities and production maintenance when requiredSupports the production maintenance team when requiredComply with all safety procedures and requirements
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQ3MTkwX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1177882&xid=1266_47190
.special-hidden
{
display: none;
}
2y
Transport company based in Markman, Port Elizabeth is looking for a Diesel Mechanic. JOB DUTIES:- Perform regular maintenance on our vehicles- Replace and repair worn parts- Diagnostic on vehicles , Fault finding - Filling in job cardsJOB REQUIREMENTS:
- Mechanical experience - Certificate of trade (Advantage)
- Hydraulic experience ( Advantage) - Team Player- Work under pressure
Please send your CV to elricafs@gmail.com
6d
1
We're looking for a candidate to fill this position in an exciting company.Responsibilities / Accountabilities: Knowledge and understanding of ISO 9000 / ISO 14000 / TS 16949Initiates measures to improve equipment performance, methods, and qualityManage all software and hardware installed on different types of continuous process equipment while ensuring minimal down times, proper documentation, and version controlProgram, Design using PLCs, HMI and SCADA while commissioning and overseeing the installation of equipmentAssists in creating, modifying, and revising automation controls instructions and process flow documentationAutomotive Assembly Process Knowledge and ExperienceAbility to read blueprints, AutoCAD, EPlan, interpret and modify electrical schematics6 Sigma Certified/TrainedPerforms other work-related duties as assignedPerformance measures/ success criteria: Improve Assembly equipment uptime using data analysis and preventative maintenance planningDevelop and implement short-, medium- and long-term improvement plans for implementation within the automated systemsTake responsibility for investigating and introducing new engineering technologies and strategiesUndertake root cause analysis and ensure Permanent Corrective Actions (PCA's) are implementedJob Qualification & Experience: Qualifications and experience:National Diploma: Electrical Engineering / Mechatronics3-5 Years PLC ExperienceMinimum of 2-3 years within the Automotive IndustryKnowledge, skills and abilities (KSA):Good behavioural and leadership skillsExcellent English Oral and Written communicationAbility To analyse and interpret data analysisGood teamwork AbilitySelf-Motivated And Results Driven IndividualRead mechanical and electronic schematics to ensure specifications, adherence to standards is metTroubleshoot equipment; manage calibration and preventative maintenance processes.Extensive knowledge of a variety of electronic and digital controls systems and experience to test and writes modifications in multiple languages of systems software (Siemens and Bosch/Rexroth).Strong understanding of networking, Ethernet, remote IO, ProfiBus and ProfiNetFault finding and continuous improvement execution and implementationEngine functionally knowledge beneficial
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18zMTdfMjAyMzEzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1205495&xid=317_202313
.special-hidden
{
display: none;
}
2y
1
Industrial Field TechnicianJob Position: Industrial Field TechnicianLocation: Port ElizabethSalary: Commensurate with experience and qualificationEmail your updated CV to recruit@onlinepersonnel.co.zaQualifications / Requirements:• Qualified Electrician/Fitter/Millwright• Minimum of 3 years working experience in a similar environment• Matric Certificate• Minimum of an N4 Technical certificate• Must be fast learner and must be able to work both independently and within a team environment• Good verbal and written communication skills• Valid driver’s licenseExperience and knowledge:• Secure the equipment/machinery to the floor – in some cases concrete work is required• Connect the machine electrically to – 230 Volt and 400 Volt. (Mostly 400V)• Connect the machine to the water supply – basic plumbing required• Connect the machine to the main drain system – basic plumbing required• Connect the machine to air ventilation system or to provide an exhaust solution• Program and setting of machines according to customers’ needs and provide training on the operation and maintenance of the machine• Complete all relevant paperwork i.e. invoice and job sheets• Identify electrical/electronic faults through a process of fault finding• Replace faulty electrical/electronic components/parts once the problem/s has been identified• Quote on repairs i.e. labour and parts involved or required to repair equipment/machinery• Identify when bearings need replacement (Mechanical requirement)• Replace bearings when needed• Repair gas and steam heated equipmentResponsibility:Email your updated CV to recruit@onlinepersonnel.co.zaQualifications / Requirements:• Qualified Electrician/Fitter/Millwright• Minimum of 3 years working experience in a similar environment• Matric Certificate• Minimum of an N4 Technical certificate• Must be fast learner and must be able to work both independently and within a team environment• Good verbal and written communication skills• Valid driver’s licenseExperience and knowledge:• Secure the equipment/machinery to the floor – in some cases concrete work is required• Connect the machine electrically to – 230 Volt and 400 Volt. (Mostly 400V)• Connect the machine to the water supply – basic plumbing required• Connect the machine to the main drain system – basic plumbing required• Connect the machine to air ventilation system or to provide an exhaust solution• Program and setting of machines according to customers’ needs and provide training on the operation and maintenance of the machine• Complete all relevant paperwork i.e. invoice and job sheets• Identify electrical/electronic faults through a process of fault finding• Replace faulty electrical/electronic components/parts once the problem/s has been identified• Quote on repairs i.e. labour and parts involved or required to repair equipment/machinery• Identify when bearings need replacement (Mechanical requirement)• Replace bearings when needed• Repair gas and steam heated equipmentJob Reference #:
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQyOTIwX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1155552&xid=1266_42920
.special-hidden
{
display: none;
}
2y
Save this search and get notified
when new items are posted!