Please note that our Terms & Conditions and Privacy Notice are applicable.
On Promotion in Home & Garden
Pay & Ship
Buy with confidence. Secure payment options & nationwide delivery. Learn more
Filter & refine
Clear All
Suggested
Results for used water tanks in "used water tanks" in Home & Garden Supplies in South Africa in South Africa
1
R 267.03
SavedSave
Please note that shipping and installation is not included.TANK SIZE: For tanks up to 5,000 liters use 1 In-tank chlorine
releasing tablet. For larger tanks (up to 7500 liters) use 2 or more
Water Tank Chlorine Dispenser. For larger tanks we recommend the use of
IN-LINE dispensing devices (such as the Klorman).WATER TESTING: To maintain necessary disinfectant levels, use
low-level chlorine test strips, or alternatively any ordinary swimming
pool chlorine test kit. In-tank chlorine releasing tablet protects against common water-borne bacteria, viruses and other pathogens
USE DIRECTIONS:
Remove dispenser from plastic pouch and unwind the anchor-cord.To adjust, turn dispenser upside down and tear off labels 1-3 to expose the desired number of apertures.DISPENSER DOES NOT FLOAT. Secure retrieval-cord
around an external anchor-point on tank BEFORE releasing the dispenser
into water. For optimal results ALWAYS suspend dispensers directly below
the incoming water flow, approximately 10cm below the water surface.It is useful to install a sampling valve at the reservoir exit-point
to enable testing. To test, open the sampling valve and run water for 5
seconds before taking water sample.
Carefully follow use-directions applicable to the test-kit or test method used.Disposal: Ensure contents are completely spent before disposal. Rinse thoroughly before disposal.
3d
Mbombela / Nelspruit1
R 54.10
SavedSave
Please note that shipping and installation is not included.Features of the Tank Angle Ball Valve 1/4″ :
100% brand new and high qualityQuick connect fittings.Simply push your 1/4″ poly tube firmly into the quick connect fittings located on outlet end and you are done.Tank ball valve 1/4″ OD x 1/4″ FTP , connect to RO water tank.
– position “close” to force the water to flow to the long reach faucet directly.
– position open” to allow the water flow in/out the water tank.Used on storage tanks for reverse osmosis systems1/4″ quick connect for quick and easy installations.Installation:
The push-fit connection allows for easy, tool-free installation. You
should apply 5-6 wraps of Teflon tape better known as thread tape to the
tank’s threaded connector before screwing the valve on.Function:
It is primarily used to stop the water flow to and from the RO tank,
which is essential for servicing the system or during periods of
non-use.
Specification of the Tank angle ball valve 1/4″:
Material: The valve is constructed of white polypropylene with food-grade EPDM O-rings, providing high chemical resistance.Dimensions: 51 x 52mm/2.01 x 2.05”(approx)Color: White & Gray with Blue handle for valve
6d
Mbombela / Nelspruit1
R 7,557.80
SavedSave
Please note that shipping and installation is not included.The Aquasystem
horizontal pressure tanks 100l – VAO 100 pressure tank with replaceable
membrane is an element used in hydraulic applications for sanitary
water circuits, such as pressure groups in combination with pumps or
devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure. In order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue Epoxy Coated
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard pee-charged pressure – 1.5 bar
Connection – 1″
Aquasystem Aquasystem Horizontal Pressure Tanks 100l Horizontal
The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be overlooked.
3d
Mbombela / Nelspruit1
R 4,023.85
SavedSave
Please note that shipping and installation is not included.The Aquasystem Horizontal
Pressure Tanks 50l Horizontal. Is an element used in hydraulic
applications for sanitary water circuits, such as pressure groups in
combination with pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
pre charged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue Epoxy Coated
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard pre charge pressure – 1.5 bar
Connection – 1″
Aquasystem Horizontal Pressure Tanks 50l Horizontal
The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be overlooked.
3d
Mbombela / Nelspruit1
R 3,844.45
SavedSave
Please note that shipping and installation is not included.The Aquasystem Vertical
Pressure Tanks With Replaceable Bladder 50L. Is an element used in
hydraulic applications for sanitary water circuits, such as pressure
groups in combination with pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
pre charged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard pre charge pressure – 1.5 bar
Connection – 1″
Aquasystem Vertical Pressure Tanks With Replaceable Bladder 50L
The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be over looked.
3d
Mbombela / Nelspruit1
R 16,504.80
SavedSave
Please note that shipping and installation is not included.The Aquasystem Vertical
Pressure Tanks With Replaceable Bladder 300L. Is an element used in
hydraulic applications for sanitary water circuits, such as pressure
groups in combination with pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
pre charged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard pre charge pressure – 2 bar
Connection – 1 1/2″
Aquasystem Vertical Pressure Tanks With Replaceable Bladder 300L
The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.
They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be overlooked.
3d
Mbombela / Nelspruit1
R 13,257.20
SavedSave
Please note that shipping and installation is not included.The Aquasystem Horizontal
Pressure Tanks 200l Horizontal. Is an element used in hydraulic
applications for sanitary water circuits, such as pressure groups in
combination with pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to pre-charge air pressure stored between the membrane and the internal metal
surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue Epoxy Coated
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard pre-charge pressure – 2 bar
Connection – 1 1/4″
Aquasystem Horizontal Pressure Tanks 200l Horizontal
The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be overlooked.
3d
Mbombela / Nelspruit1
R 25,022.85
SavedSave
Please note that shipping and installation is not included.The Aquasystem Vertical
Pressure Tanks With Replaceable Bladder 500L. Is an element used in
hydraulic applications for sanitary water circuits, such as pressure
groups in combination with pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
pre charged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard pre charge pressure – 2 bar
Connection – 1 1/2″Aquasystem Vertical Pressure Tanks With Replaceable Bladder 500L
The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safe guarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be overlooked.
3d
Mbombela / Nelspruit1
R 1,008.55
SavedSave
Please note that shipping and installation is not included.The Aquasystem Vertical
Pressure Tanks With Replaceable Bladder 24L. Is an element used in
hydraulic applications for sanitary water circuits, such as pressure
groups in combination with pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
pre charged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 8 bar
Standard pre charge pressure – 1.5 bar
Connection – 1″
Aquasystem Vertical Pressure Tanks With Replaceable Bladder 24L
The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be overlooked.
3d
Mbombela / Nelspruit1
R 7,243.85
SavedSave
Please note that shipping and installation is not included.The Aquasystem Vertical
Pressure Tanks With Replaceable Bladder 100L. Is an element used in
hydraulic applications for sanitary water circuits, such as pressure
groups in combination with pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard pre charge pressure – 1.5 bar
Connection – 1″Aquasystem Vertical Pressure Tanks With Replaceable Bladder 100L. The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be overlooked.
3d
Mbombela / Nelspruit1
R 5,071.50
SavedSave
Please note that shipping and installation is not included.The Aquasystem Horizontal
Pressure Tanks 60l Horizontal. Is an element used in hydraulic
applications for sanitary water circuits, such as pressure groups in
combination with pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure. In order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard pre charge pressure – 1.5 bar
Connection – 1″
Aquasystem Horizontal Pressure Tanks 60l Horizontal
The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be overlooked.
3d
Mbombela / Nelspruit1
R 3,836.40
SavedSave
Please note that shipping and installation is not included.The Aquasystem Vertical
Hot Galvanized Dipped Pressure Tanks With Replaceable Bladder 60L. Is
an element used in hydraulic applications for sanitary water circuits,
such as pressure groups in combination with pumps or devices such as
anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure. In order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
External finish color -Galvanized Steel
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard precharge pressure – 2 bar
Connection – 1″
Aquasystem Vertical Hot Galvanized Dipped Pressure Tanks Replaceable Bladder 60L
The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be overlooked.
3d
Mbombela / Nelspruit1
R 12,940.95
SavedSave
Please note that shipping and installation is not included.The Aquasystem Vertical
Pressure Tanks With Replaceable Bladder 200L. Is an element used in
hydraulic applications for sanitary water circuits, such as pressure
groups in combination with pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
pre charged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard pre charge pressure – 2.5 bar
Pressure after replacing bladder – 0.2 bar less than your cut-in pressure.
Connection – 1 1/2″Aquasystem Vertical Pressure Tanks With Replaceable Bladder 200L
The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be overlooked.
3d
Mbombela / Nelspruit1
R 17,590.40
SavedSave
Please note that shipping and installation is not included.The Aquasystem Vertical
Hot Galvanized Dipped Pressure Tanks With Replaceable Bladder 200L. Is
an element used in hydraulic applications for sanitary water circuits,
such as pressure groups in combination with pumps or devices such as
anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
pre charged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Galvanized Steel
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard pre charge pressure – 2 bar
Connection – 1 1/4″Aquasystem Vertical Hot Galvanized Dipped Pressure Tanks With Replaceable Bladder 200L
The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be overlooked.
3d
Mbombela / Nelspruit1
R 17,590.40
SavedSave
Please note that shipping and installation is not included.The Aquasystem Vertical
Hot Galvanized Dipped Pressure Tanks With Replaceable Bladder 200L. Is
an element used in hydraulic applications for sanitary water circuits,
such as pressure groups in combination with pumps or devices such as
anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
pre charged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Galvanized Steel
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard pre charge pressure – 2 barConnection – 1 1/4″Aquasystem Vertical Hot Galvanized Dipped Pressure Tanks With Replaceable Bladder 200L
The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be overlooked.
3d
Mbombela / Nelspruit1
R 32,570.30
SavedSave
Please note that shipping and installation is not included.The Aquasystem Vertical
Galvanized Dipped Pressure Tanks Replaceable Bladder 500L is an element
used in hydraulic applications for sanitary water circuits, such as
pressure groups in combination with pumps or devices such as anti-water
hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
pre charged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Galvanized Steel
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard pre charge pressure – 2 bar
Connection – 1 1/4″
Aquasystem Vertical Galvanized Dipped Pressure Tanks Replaceable Bladder 500LA quality hydro press from AQUASYSTEM
that has a food-approved membrane that separates water and air inside
the container. The membrane is easily replaceable. All our vessels are
manufactured, tested and checked according to current European
regulations.
The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be overlooked.
3d
Mbombela / Nelspruit1
R 5,503.30
SavedSave
Please note that shipping and installation is not included.
10″ Diameter Water Softener With Manual Backwash Head
CATION RESIN
Different separation, purification, and decontamination processes use
ion-exchange resins. The most common examples are water softening and
water purification. In many cases, ion-exchange resins were used as a
more flexible alternative to natural or artificial zeolites in various
processes. Also, ion-exchange resins are highly effective in the
biodiesel filtration process.
Brine Tank
Salt Tank / Salt Tank Softener 100 Liter is a salt tank with a
capacity of 100 Liter which functions as a salt container where the salt
is usually used to regenerate softener / Ion Exchange Resin (Resin
Cation).
In a water treatment system, salt is needed to regenerate the media.
Which is often called Ion Exchange Resin (Resin Cation). Media softener /
Ion Exchange Resin (Resin Cation) will reduce the level of hardness in
water which can cause a white crust, by capturing Calcium and Magnesium
ions until the softener media reaches its saturation point.
If it is saturated, the cation resin must be activated/regenerated again so that it can be used again.
The way to activate/regenerate the cation resin is by using
industrial salt. Then the function of the Salt Tank / Salt Softener Tank
is to regenerate the cation resin which is filled with melted salt
inside.
10″ Diameter Water Softener With Manual Backwash Head Advantages
Due to the conic body, brine tanks can be packed one by one to any height. Generally saves over 70% freight for the buyers.For brine tanks 350L-2000L, each tank is designed with a small lid
on a large cover. It is more convenient for users to put salt into the
tank.For brine tanks 350-2000, the salt well in the tank is extended
upward to the top of the large cover, so that the effective capacity of
the salt solution is increased by over 15%.For new exterior design and precise mold, the quality of the product has been greatly improved.
4d
Mbombela / Nelspruit1
R 8,152.49
SavedSave
Please note that shipping and installation is not included.
13″ Diameter Water Softener With Manual Backwash Head
CATION RESIN
Ion-exchange resins are widely used in different separation,
purification, and decontamination processes. The most common examples
are water softening and water purification. In many cases ion-exchange
resins were introduced in such processes as a more flexible alternative
to the use of natural or artificial zeolites. Also, ion-exchange resins are highly effective in the biodiesel filtration process.
Brine Tank
Salt Tank / Salt Tank Softener 100 Liter is a salt tank with a
capacity of 100 Liter. Which functions as a salt container where the
salt is usually used to regenerate softener / Ion Exchange Resin (Resin
Cation).
In a water treatment system, salt is needed to regenerate the media.
Which is often called Ion Exchange Resin (Resin Cation). Media softener /
Ion Exchange Resin (Resin Cation) will reduce the level of hardness in
water. Following a white crust, by capturing Calcium and Magnesium ions
until the softener media reaches its saturation point.
If it is saturated, the cation resin must be activated/regenerated again so that it can be used again.
The way to activate/regenerate the cation resin is by using
industrial salt, then the function of the Salt Tank / Salt Softener Tank
is to regenerate the cation resin which is filled with melted salt
inside.
Advantages
Firstly by the conic shape of the brine tanks, buyers can save over
70% on freight for each tank individually placed to any height.Evidently each brine tank, including 350L-2000L, has a large cover
with a small lid. It is more convenient for users to put salt into the
tank.For brine tanks 350-2000, the salt well in the tank is extended
upward to the top of the large cover. Increase the effective capacity of
the salt solution by over 15%.Finally the new exterior design and precise mold have greatly improved the product’s quality.
4d
Mbombela / Nelspruit1
R 10,754.48
SavedSave
Please note that shipping and installation is not included.
13″ Diameter Water Softener With An Automatic Backwash Head
CATION RESIN
Ion-exchange resins are widely used in different separation,
purification, and decontamination processes. The most common examples
are water softening and water purification. In many cases ion-exchange
resins were introduced in such processes as a more flexible alternative
to the use of natural or artificial zeolites. Also, ion-exchange resins
are highly effective in the biodiesel filtration process.
Brine Tank
Salt Tank / Salt Tank Softener 100 Liter is a salt tank with a
capacity of 100 Liter which functions as a salt container where the salt
is usually used to regenerate softener / Ion Exchange Resin (Resin
Cation).
The water treatment system requires the addition of salt to
regenerate the media. Ion Exchange Resin is referred to as “Ion Exchange
” or ” Cation Resin”. Media softener / Ion Exchange Resin (Resin
Cation) will reduce the level of hardness in water which can cause a
white crust, by capturing Calcium and Magnesium ions until the softener
media reaches its saturation point.When saturated, the cation resin must be activated or regenerated to be used again. The way to activate/regenerate the cation resin is by using
industrial salt, then the function of the Salt Tank / Salt Softener Tank
is to regenerate the cation resin which is filled with melted salt
inside.
Advantages
With a conic body, brine tanks can be filled one at a time to any height. As a result it saves over 70% freight for the buyers.For brine tanks 350L-2000L, each tank is designed with a small lid
on a large cover. Altogether it is more convenient for users to put salt
into the tank.For brine tanks 350-2000, the salt well in the tank is extended
upward to the top of the large cover. Afterwards increasing the
effective capacity of the salt solution by over 15%.The new exterior design and precise mold have greatly improved the product’s quality.
5d
Mbombela / Nelspruit1
R 9,038.03
SavedSave
Please note that shipping and installation is not included.
10″ Diameter Water Softener With An Automatic Backwash Head
CATION RESIN
Ion-exchange resins are widely used in different separation,
purification, and decontamination processes. The most common examples
are water softening and water purification. In many cases ion-exchange
resins were introduced in such processes as a more flexible alternative
to the use of natural or artificial zeolites. Also, ion-exchange resins are highly effective in the biodiesel filtration process.
Brine Tank
Salt Tank / Salt Tank Softener 100 Liter is a salt tank with a
capacity of 100 Liter which functions as a salt container. But the Resin
Cation is usually regenerated with salt.
The Ion Exchange Resin in a water treatment system requires the
addition of salt to regenerate effectively. Media softener / Ion
Exchange Resin (Resin Cation) will reduce the level of hardness in
water. Which can cause a white crust, by capturing Calcium and Magnesium
ions until the softener media reaches its saturation point.
When the cation resin is saturated, it must be activated or regenerated in order to be used again.
The way to activate/regenerate the cation resin is by using
industrial salt, then the function of the Salt Tank / Salt Softener Tank
is to regenerate the cation resin which is filled with melted salt
inside.
Advantages
Firstly by the conic shape of the brine tanks, buyers can save over
70% on freight for each tank individually placed to any height.Each brine tank, including 350L-2000L, has a large cover with a
small lid. It is more convenient for users to put salt into the tank.The large cover of brine tank 350-2000 is raised upward to extend
the salt well, increasing the effective capacity of the salt solution in
the tank by over 15%.Lastly the new exterior design and precise mold have greatly improved the product’s quality.
5d
Mbombela / NelspruitSave this search and get notified
when new items are posted!
