Please note that our Terms & Conditions and Privacy Notice are applicable.
On Promotion in Home & Garden
Pay & Ship
Buy with confidence. Secure payment options & nationwide delivery. Learn more
Filter & refine
Clear All
Suggested
Results for used plastic water tank in "used plastic water tank" in Home & Garden Supplies in South Africa in South Africa
1
R 838.35
SavedSave
Please note that shipping and installation is not included.Water treatment systems most likely use the black disc with a red
seal as a 6″ Flange plug. The system seals the bottom opening of
top-mounted FRP (fiber-reinforced plastic) filter tanks.
6″ Flange plug information
Purpose: Seals the bottom connection of an FRP
filter tank, providing easy access for maintenance, cleaning, or
installing a bottom filter distributor.Material: Typically made from ABS plastic with an O-ring (the red seal in the image) to ensure a watertight seal.Compatibility: This plug is suitable for use with tanks that have a 6-inch bottom connection.Applications: Primarily used in commercial and
industrial water treatment and purification systems, such as water
softeners, filter tanks, and other water management equipment.
4d
Mbombela / Nelspruit
1
R 380.36
SavedSave
Please note that shipping and installation is not included.A 4″ Threaded plug for an FRP (Fiberglass Reinforced Plastic) vessel.
Is a specific plastic fitting used to seal the tank’s top or bottom
opening. When a control valve or other fitting is not needed. Such as
during storage or for simple whole-house filtration systems that don’t
require access to the top.
4″ Threaded plug details
Material: The plugs are typically made from
durable, chemical-resistant plastics. Like ABS or reinforced
polypropylene (PP), which are suitable for water treatment applications
and are often food-grade.Threading: The plug features a 4″ male thread
designed to screw into the standard 4-inch female threaded opening found
on most residential and commercial FRP pressure vessels.Design: These are often a simple, robust design,
sometimes with a hex head or a flat top with an internal hex/square. For
use with a wrench during installation and removal.Sealing: A proper seal is typically achieved with a
built-in EPDM or similar gasket/O-ring. Ensuring a watertight
connection without the need for additional sealant in smooth-lined
tanks.
4d
Mbombela / Nelspruit
1
R 267.03
SavedSave
Please note that shipping and installation is not included.TANK SIZE: For tanks up to 5,000 liters use 1 In-tank chlorine
releasing tablet. For larger tanks (up to 7500 liters) use 2 or more
Water Tank Chlorine Dispenser. For larger tanks we recommend the use of
IN-LINE dispensing devices (such as the Klorman).WATER TESTING: To maintain necessary disinfectant levels, use
low-level chlorine test strips, or alternatively any ordinary swimming
pool chlorine test kit. In-tank chlorine releasing tablet protects against common water-borne bacteria, viruses and other pathogens
USE DIRECTIONS:
Remove dispenser from plastic pouch and unwind the anchor-cord.To adjust, turn dispenser upside down and tear off labels 1-3 to expose the desired number of apertures.DISPENSER DOES NOT FLOAT. Secure retrieval-cord
around an external anchor-point on tank BEFORE releasing the dispenser
into water. For optimal results ALWAYS suspend dispensers directly below
the incoming water flow, approximately 10cm below the water surface.It is useful to install a sampling valve at the reservoir exit-point
to enable testing. To test, open the sampling valve and run water for 5
seconds before taking water sample.
Carefully follow use-directions applicable to the test-kit or test method used.Disposal: Ensure contents are completely spent before disposal. Rinse thoroughly before disposal.
7d
Mbombela / Nelspruit
1
R 768.80
SavedSave
Please note that shipping and installation is not included.Product Characteristics
Simple structure and reliable sealingIt adopts
hermetic head faces with high degree pottery and corrosion resistance
for opening and closing. It combines with Service, Backwash, Brine &
Slow Rinse, Brine Refill and Fast Rinse.No water passes the valve of single tank type in regeneration.Various methods for installationThe valve can be top-mounted and side-mounted (Should be used with the side-mounted connector).Handle alternatives: Metal and plasticThe RUNXIN F64A1 Manual Softener Head adopts hermetic head faces
with high degree pottery and corrosion resistance for opening and
closing. No water passes the valve of single tank type in regeneration.
Various ways of installation: it can be top mounted or side-mounted.
Handle alternatives: metal Handle or plastic handle.
Model
F64A1
Handle material
Metal/plastic
Mount type
Top mount
Inlet/outlet
1″F
Drain
1/2″M
Brine line connector
3/8″M
Mounting base
2.5″-8NPSM
Riser pipe
1.05″OD
Flow rate
4m³/h
Filter tank
6″–18″
Water pressure
0.15-0.6Mpa
Water temperature
5-50℃
Water turbidity
Down-flow regeneration＜5FTU
Application
Ion exchange equipment, water softener for boiler system, RO pre treatment system
4d
Mbombela / Nelspruit
1
R 61
SavedSave
Please note that shipping and installation is not included.Bottom Strainer 27mm
The top and bottom strainers are used to block big particles and the media leaving the vessel.
Water distributor is generally installed inside FRP tanks. Including
softening water tanks, quartz sand filters and activated carbon filters
plays the role of distributing water evenly. Lowering flow rate and
impact and preventing filter material leakage.
It is generally made of PP, ABS, PVC and features
simple structure. Easy operation, easy to install and remove, low energy
consumption, small footprint and long lifespan. It is often used in pre
filtration systems, softened water treatment equipment, filter tanks or
mixing tanks.
Bottom Strainer 27mm might vary in shape, size, diameter and other
characteristics that are tailored to the specific requirements of the
water treatment system. However, in general, the switch gear is a
compact piece made from durable, impact-resistant plastic. In the walls
of the distributor housing there are threaded bore holes. As well as a
hole through which the device is connected to the water-lifting tube.
In general, the switch gear is a compact piece made from durable,
impact-resistant plastic. In the walls of the distributor housing there
are threaded bore holes. As well as a hole through which the device is
connected to the water-lifting tube. There are calibrated slots and
connecting threads in the housing or the beams (extending to all sides
of the side plastic tubes). This eliminates the need for gravel beds in fine mesh resin systems without sacrificing flow.
11d
Mbombela / Nelspruit
1
R 215.80
SavedSave
Please note that shipping and installation is not included.You need a specific 4″ Reducer to 2.5″ mount designed for FRP
(Fiberglass Reinforced Plastic) vessels. To connect a standard 2.5-inch
control valve or head unit to a tank with a larger 4-inch top opening.
4″ Reducer to 2.5″ mount details
Purpose: This adapter is a bushing that reduces the 4-inch vessel
opening to the standard 2.5-inch size. Allowing for the installation of
most standard control valves or multi-port valves (MPVs).Material: These reducers are typically made from durable,
corrosion-resistant ABS plastic or similar high-grade plastic materials.
To ensure longevity and a secure, leak-proof fit in water treatment
applications.Threading: The adapter features a 4″-8 UN (Unified National) outer
threads to fit into the tank opening and a 2.5″-8 NPSM inner threads to
connect to the control valve.Compatibility: It allows compatibility with a wide range of common
2.5-inch control heads. From brands like Runxin, Fleck, Autotrol, and
others, offering flexibility in system design.Riser Pipe: The reducer is designed to accommodate the standard 27mm
(3/4″) riser pipe used with 2.5″ control heads, ensuring proper flow
distribution within the tank.
4d
Mbombela / Nelspruit
1
R 101.75
SavedSave
Please note that shipping and installation is not included.Bottom Distributor for a 13″ to 16″ tank – 2.5″ mount
The top and bottom strainers are uses:
Firstly in cleaning systems, Bottom Distributor for a 13″ to 16″ tank
– 2.5″ mount . The upper ones protect the control valve from being
clogged by particles of a granular load. The lower ones evenly
distribute the flow of water leaving the lifting tube in different
directions. Also collect the already filtered water and send it back to
the lifting tube.
Water distributor is generally installed inside FRP tanks. Including
softening water tanks, quartz sand filters and activated carbon filters,
and plays the role of distributing water evenly. Lowering flow rate and
impact and preventing filter material leakage.
It is generally made of PP, ABS, PVC and features
simple structure. Easy operation, easy to install and remove, low energy
consumption, small footprint and long lifespan. It is often used in pre
filtration systems, softened water treatment equipment, filter tanks or
mixing tanks.
Bottom Distributor for a 13″ to 16″ tank – 2.5″ mount might vary in
shape, size, diameter and other characteristics that are tailored to the
specific requirements of the water treatment system. However, in
general, the switch gear is a compact piece made from durable,
impact-resistant plastic. In the walls of the distributor housing there
are threaded bore holes. As well as a hole through which the device is
connected to the water-lifting tube. There are calibrated slots and
connecting threads in the housing or the beams (extending to all sides
of the side plastic tubes).Finally
the Bottom Distributor for a 13″ to 16″ tank – 2.5″ mount works great
for water softeners, iron filters, carbon filters, sediment filters, and
all other back washing and up flow tank filter systems. This eliminates
the need for gravel beds in fine mesh resin systems without sacrificing
flow.
11d
Mbombela / Nelspruit
1
R 101.75
SavedSave
Please note that shipping and installation is not included.The top and bottom strainers uses:
The effectiveness of all filter and ion exchange media is a function
of the surface area in contact with the solution to be treated.
Distributors help spread the water throughout the media for increased
contact and the prevention of channeling.
Firstly in cleaning systems, Top distributor for a 13″ to 16″ tank –
2.5″ mount. The upper ones protect the control valve from being clogged
by particles of a granular load. The lower ones evenly distribute the
flow of water leaving the lifting tube in different directions. Also
collect the already filtered water and send it back to the lifting tube.
Top distributor for a 13″ to 16″ tank – 2.5″ mount might vary in
shape, size, diameter and other characteristics. That are tailored to
the specific requirements of the water treatment system. However, in
general, the switch gear is a compact piece made from durable,
impact-resistant plastic. Certainly in the walls of the distributor
housing there are threaded bore holes. As well as a hole through which
the device is connected to the water-lifting tube. There are calibrated
slots and connecting threads in the housing or the beams (extending to
all sides of the side plastic tubes).
Water distributor is generally installed inside FRP tanks including
softening water tanks, quartz sand filters and activated carbon filters,
and plays the role of distributing water evenly, lowering flow rate and
impact and preventing filter material leakage.It is generally made of PP, ABS, PVC and features
simple structure, easy operation, easy to install and remove, low energy
consumption, small footprint and long lifespan. It is often used in pre
filtration systems, softened water treatment equipment, filter tanks or
mixing tanks.
11d
Mbombela / Nelspruit
1
R 47.66
SavedSave
Please note that shipping and installation is not included.The effectiveness of top strainer 27mm and ion exchange media is a
function of the surface area in contact with the solution to be treated.
Distributors help spread the water throughout the media for increased
contact and the prevention of channeling.
Firstly in cleaning systems, top strainer 27mm. The upper ones
protect the control valve from being clogged by particles of a granular
load. The lower ones evenly distribute the flow of water leaving the
lifting tube in different directions. Also collect the already filtered
water and send it back to the lifting tube.
Top strainer 27mm might vary in shape, size, diameter and other
characteristics. That are tailored to the specific requirements of the
water treatment system. However, in general, the switch gear is a
compact piece made from durable, impact-resistant plastic. Certainly in
the walls of the distributor housing there are threaded bore holes. As
well as a hole through which the device is connected to the
water-lifting tube. There are calibrated slots and connecting threads in
the housing or the beams (extending to all sides of the side plastic
tubes).It is generally made of PP, ABS, PVC and features simple structure,
easy operation, easy to install and remove, low energy consumption,
small footprint and long lifespan. It is often used in pre-filtration
systems, softened water treatment equipment, filter tanks or mixing
tanks.
11d
Mbombela / Nelspruit
1
R 113.34
SavedSave
Please note that shipping and installation is not included.27mm Riser pipe for 14” – 18” vessels with 2.5” inlet
To sum up what a riser pipe is. Specifically to connect the top and
bottom strainer to a manual. As well as a automatic filter head inside a
FRP vessel.
What is top and bottom strainers?
For you to use a 27mm Riser pipe for 14” – 18” vessels with 2.5”
inlet you will need top and bottom strainers. For this purpose the top
and bottom strainers is designed to block large particles and the media
exiting the vessel
Bottom Distributor as well as Top distributor mount might vary in
shape, size, diameter and other characteristics that are tailored to the
specific requirements of the water treatment system. However, in
general, the switch gear is a compact piece made from durable,
impact-resistant plastic. In the walls of the distributor housing there
are threaded bore holes. As well as a hole through which the device is
connected to the water-lifting tube. There are calibrated slots and
connecting threads in the housing or the beams (extending to all sides
of the side plastic tubes).Water distributor is generally installed inside FRP tanks. Including
softening water tanks, quartz sand filters and activated carbon filters,
and plays the role of distributing water evenly. Lowering flow rate and
impact and preventing filter material leakage.
11d
Mbombela / Nelspruit
1
R 100.46
SavedSave
Please note that shipping and installation is not included.27mm Riser pipe for 8” – 13” vessels with 2.5” inlet
To sum up what a riser pipe is. Specifically to connect the top and
bottom strainer to a manual. As well as a automatic filter head inside a
FRP vessel
What is top and bottom strainers?
For you to use a 27mm Riser pipe for 8” – 13” vessels with 2.5” inlet
you will need top and bottom strainers. For this purpose the top and
bottom strainers is designed to block large particles and the media
exiting the vessel.
Water distributor is generally installed inside FRP tanks. Including
softening water tanks, quartz sand filters and activated carbon filters,
and plays the role of distributing water evenly. Lowering flow rate and
impact and preventing filter material leakage.
Top and Bottom Strainers is generally made of PP, ABS, PVC and
features simple structure. Easy operation, easy to install and remove,
low energy consumption, small footprint and long lifespan. It is often
used in pre filtration systems, softened water treatment equipment,
filter tanks or mixing tanks.In general, the switch gear is a compact piece made from durable,
impact-resistant plastic. In the walls of the distributor housing there
are threaded bore holes. As well as a hole through which the device is
connected to the water-lifting tube.
11d
Mbombela / Nelspruit
1
R 991.76
SavedSave
Please note that shipping and installation is not included.Bottom Distributor – high flow – bayonet for 36″ tank – 4″ mount
Filter diameter, (inch / mm) 30 ” / 600 mm
Filter mounting hole 4″
In cleaning systems, top and bottom distributors are used. The upper
ones protect the control valve from being clogged by particles of a
granular load. The lower ones evenly distribute the flow of water
leaving the lifting tube in different directions, and also collect the
already filtered water and send it back to the lifting tube.
Distributors vary in shape, size, diameter and other characteristics.
That are tailored to the specific requirements of the water treatment
system. However, in general, the switch gear is a compact piece made from
durable, impact-resistant plastic. In the walls of the distributor
housing there are threaded bore holes, as well as a hole through which
the device is connected to the water-lifting tube. There are calibrated
slots and connecting threads in the housing or the beams (extending to
all sides of the side plastic tubes).
Dim -L1 – 331
Dim-L2 – 710
Dim-L3 – 175
Tank Dia -36″
Slots (Area) – 0.2 (=15.84cm2)
Overall effectiveness of all filter and ion exchange media is a
function of the surface area in contact with the solution to be treated.
In addition distributors help spread the water throughout the media for
increased contact and the prevention of channeling.Obviously it is effectiveness of all filter and ion exchange media is
a function of the surface area in contact with the solution to be
treated. In a word Bottom Distributor high flow will help spread the
water throughout the media. For increased contact and the prevention of
channeling. Finally top and bottom distributors, as well as risers are
available for tanks ranging from 6” to 63” in diameter.
11d
Mbombela / Nelspruit
1
R 176.46
SavedSave
Please note that shipping and installation is not included.50mm Riser pipe for 14″-36″ with 4″ inlet
To sum up what a riser pipe is. Specifically to connect the top and
bottom strainer to a manual. As well as a automatic filter head inside a
FRP vessel
What is top and bottom strainers?
For you to use a 50mm Riser pipe for 14″-36″ with 4″ inlet you will
need top and bottom strainers. For this purpose the top and bottom
strainers is designed to block large particles and the media exiting the
vessel.
Water distributor is generally installed inside FRP tanks. Including
softening water tanks, quartz sand filters and activated carbon filters,
and plays the role of distributing water evenly. Lowering flow rate and
impact and preventing filter material leakage.
Top and Bottom Strainers is generally made of PP, ABS, PVC and
features simple structure. Easy operation, easy to install and remove,
low energy consumption, small footprint and long lifespan. It is often
used in pre filtration systems, softened water treatment equipment,
filter tanks or mixing tanks.
In general, the switch gear is a compact piece made from durable,
impact-resistant plastic. In the walls of the distributor housing there
are threaded bore holes. As well as a hole through which the device is
connected to the water-lifting tube.
11d
Mbombela / Nelspruit
1
R 158.98
SavedSave
Please note that shipping and installation is not included.Functions Of A GAC Granular activated carbon 10 inch big blue filter:GAC Granular Activated Carbon 10 Inch Big Blue Filter. Highly effective filtration of water for certain Chlorine, odor and improve the taste. To keep your filter system operating effectively, replace this cartridge annually or by recommendation of your experienced water condition dealer.
GAC Filters Significantly Reduce the Following Contaminants:ChlorineChlorine By-Products like trihalomethanes (THMs) – A Group of organic chemicals suspected of being carcinogenic.Bad Tastes & OdorsTurbidity (Cloudy Water)Pesticides, Herbicides & InsecticidesVolatile Organic Chemicals – Organic Chemicals that turn into vapor.Fit most standard residential and commercial housings, for easy replacement into existing systems.They are offered in residential to commercial sizes (10” standard to 20” big blue), our filter cartridges can be used with most standard filter housings and as replacements in existing systems or assemblies.Granular activated carbon filters can be used as pretreatment or post-treatment in residential and commercial reverse osmosis systems, or as a stand-alone at the point of use water treatment solution for clean, fresh-tasting drinking water.Best suited forApartments or houses occupied by 2-5 people using a domestic 3-stage reverse osmosis filter.Key advantagesTasty water, thanks to 100% granular coconut shell carbonExtended capacity of 10 000 litersReduction of chlorine and organic matter, improvement of the taste, color and odor of waterFilter housing made of pure European food-grade plasticApplicable for use on reverse osmosis filters produced by other manufacturersBenefits of using the filter
Timely servicing and replacement of the cartridge ensures water will remain filtered and delicious.No unpleasant odours or flavours and sophisticated sweetish flavour of the purified water.
17h
Mbombela / Nelspruit
1
R 438.43
SavedSave
Please note that shipping and installation is not included.RUNXIN F56A1 Manual Filter Head
Technical Specification:
Water Pressure: 0.15—0.6MPaWater Temperature: 5℃-50℃Water Turbidity: ＜20FTUInlet/Outlet: 1/2″or 3/4″ FemaleDrain: 1/2″or 3/4″FemaleBase: 2.5″-8NPSMRiser Pipe: 1.05″ODMax Flow Rate: 4 m3/hSuitable Tank Size (in): 6″～10″
Range of application:
The RUNXIN F56A1 Manual Filter
Head can be used with several different Filtration Medias such as
Activated Carbon, Silica Sand, Birm, Crystal Sand, Katalox Light or AFM
Glass Media.
To point out the Manual Backwash Head allows you to manually backwash
out sediment, dirt, rust, and other large particles that are caught
between the media granules.
Seeing that RUNXIN
F56D1 Manual Filter Head low cost manual control valve with metal handle
is designed for non-reagent wash filters. To conclude it is used in
industrial water treatment systems, high performance. In summary it has
three job positions: service mode (working), backwash mode, direct
flushing mode.
In that case it is used in water filtration . Simple and reliable
valve, has a disk design, during washing the exit from the filter is
closed. On the positive side this does not require a network connection.
To put it another way the frequency of flushing depends on the quality
of the source water, the size of the filter and the nature of the water
consumption.
Manual filter valve parameters:
It adopts hermetic head faces with high degree pottery and corrosion
resistance for opening and closing. No water passes the valve in rinse
in single tank type. Reasonable design of the flow passage: Service→Fast
Rinse →Backwash→Fast Rinse→Backwash-Service. It can be changed to be
side-mounted valve with side-mounted connector. It can operate under
pressure,without leakage.
Model
F56A1
Handle material
Metal/plastic
Mount type
Top mount
Inlet/outlet
1″F
Drain
1″F
Mounting base
2.5″-8NPSM
Riser pipe
1.05″OD
Flow rate
4m³/h
Filter tank
6″–12″
Water pressure
0.15-0.6Mpa
Water temperature
5-50℃
Water turbidity
＜20FTU
Application
Activated carbon filter, sand filter
Filter media
Quartz sand, activated carbon
4d
Mbombela / Nelspruit
1
R 10,143.41
SavedSave
Please note that shipping and installation is not included.Technical Specification WC FRP Pressure tank 18″ x 65″ (260L):
Specifications:
Firstly Opening Size (Inches) : 4″Also a Recommended Flow Rate (Liters Per Hour) : 3200– 4600 l p/hVessel Volume (Liters) : 148Polyethylene inner shell.Maximum operating pressure – 150 psi.Maximum operating temperature – 120°F (threaded); 150°F (flanged).
Why WC FRP Pressure tank 18″ x 65″ (260L)?
Undeniably More Advanced Production Line: By Automatic Robots.Also a Higher Testing Standards and Requirements.Safer and high quality materials: Food Grade, HDPE Liner.More Certificates: NSF and ACS certificated, KTW and W270 are being applied.More Packing methods: single box, large box and pallet packing.Longer Warranty: 1 year for residential tanks and 1 year for commercial and industrial tanks.More combined components reduce costs: such as central tube, resin, cabinet etc.Lower Price and Faster delivery time.An FRP (Fiber Reinforced Plastic) vessel with a dome hole on the side
(often called a “dome hole vessel” or “side access vessel”). Is
designed for use in water treatment systems. Specifically to facilitate
easy access for checking, adding, or replacing filtration media without
needing to remove the main control valve and internal piping.
4d
Mbombela / Nelspruit
1
R 2,220.70
SavedSave
Please note that shipping and installation is not included.Technical Specification:
Water Pressure: 0.15—0.6MPaWater Temperature: 5℃-50℃Water Turbidity: ＜20FTUInlet/Outlet: 2″FDrain: 1.5″FBase: 4″-8UNRiser Pipe: 1.5″D-GBMax Flow Rate: 10 m3/hSuitable Tank Size (in): 10″～24″
Range of application:
The Manual Backwash Header
Valve can be used with several different Filtration Medias. Such as
Activated Carbon, Silica Sand, Birm, Iron Removal Resin, Crystal Sand or
AFM Glass Media. To put it another way the Manual Backwash valve Head
allows you to manually backwash sediment, dirt, rust, and other large
particles from the filter media.
Seeing that
RUNXIN F56D1 Manual Filter Head low cost manual control valve with metal
handle. We designed it for non-reagent wash filters. To conclude,
industrial water treatment systems use it for high performance. In
summary it has three job positions: service mode (working), backwash
mode, direct flushing mode.
In that case,
they use it in water filtration. Simple and reliable valve, has a disk
design, during washing the exit from the filter is closed. On the
positive side this does not require a network connection. The frequency
of flushing depends on the quality of the source water, the size of the
filter and the nature of the water consumption.
It adopts hermetic head faces with high degree pottery and corrosion
resistance for opening and closing. No water passes the valve in rinse
in single tank type. Reasonable design of the flow passage: Service→Fast
Rinse →Backwash→Fast Rinse→Backwash-Service. It can be changed to be
side-mounted valve with side-mounted connector. It can operate under
pressure,without leakage.
RUNXIN F56D1 Manual Filter Head
Finally the F56D manual multi port filter valve provides a flow rate
of 10m³/h and adopts a corrosion resistant gasket for opening and
closing. It can be applied as a service, backwash, or fast rinse valve.
It can also work under pressure. With a rotating hand wheel, you can
easily switch the settings without turning off the pump. The filter can
be used in residential filtration systems, swimming pool filtrating and
RO pre treatment filtration systems.
Model
F56D1
Handle material
Metal/plastic
Mount type
Top mount / side mount
Inlet/outlet
2″F
Drain
2″F
Mounting base
4″-8UN
Riser pipe
1.5″D-GB
Flow rate
10m³/h
Filter tank
10″–24″
Water pressure
0.15-0.6Mpa
Water temperature
5-50℃
Water turbidity
＜20FTU
Application
Manganese and iron removal
Filter media
Quartz sand, activated carbon, manganese sand
4d
Mbombela / Nelspruit
1
R 294.35
SavedSave
Please note that shipping and installation is not included.Functions Of A GAC Granular Activated Carbon 20 Inch Big:GAC Granular Activated Carbon 20 Inch Big Blue Filter. Highly effective filtration of water for certain Chlorine, odor and improve the taste. To keep your filter system operating effectively, replace this cartridge annually or by recommendation of your experienced water condition dealer.
GAC Filters Significantly Reduce the Following Contaminants:ChlorineChlorine By-Products like trihalomethanes (THMs) – A Group of organic chemicals suspected of being carcinogenic.Bad Tastes & OdorsTurbidity (Cloudy Water)Pesticides, Herbicides & InsecticidesVolatile Organic Chemicals – Organic Chemicals that turn into vapor.Fit most standard residential and commercial housings, for easy replacement into existing systems.They are offered in residential to commercial sizes (10” standard to 20” big blue), our filter cartridges can be used with most standard filter housings and as replacements in existing systems or assemblies.Granular activated carbon filters can be used as pretreatment or post-treatment in residential and commercial reverse osmosis systems, or as a stand-alone at the point of use water treatment solution for clean, fresh-tasting drinking water.Best suited forApartments or houses occupied by 2-5 people using a domestic 3-stage reverse osmosis filter.Key advantagesTasty water, thanks to 100% granular coconut shell carbonExtended capacity of 10 000 litersReduction of chlorine and organic matter, improvement of the taste, color and odor of waterFilter housing made of pure European food-grade plasticApplicable for use on reverse osmosis filters produced by other manufacturersBenefits of using the filter
Timely servicing and replacement of the cartridge ensures water will remain filtered and delicious.No unpleasant odors or flavors and sophisticated sweetish flavor of the purified water.Applications:Home Drinking WaterPoint of Use (POU) RO SystemsUnder the Sink/ Under the Counter RO SystemsCounter Top FiltersWhole-House FiltrationPoint of Entry FiltrationCommercial RO Pre treatmentResidential RO Pre treatmentResidential RO Post Treatment
15h
Mbombela / Nelspruit
1
R 5,885.84
SavedSave
Please note that shipping and installation is not included.Technical Specification WC FRP Pressure tank 14″ x 65″ (148L):
Specifications:
Firstly Opening Size (Inches) : 2.5″Also a Recommended Flow Rate (Liters Per Hour) : 2500 – 3000 l p/h (50lpm)Vessel Volume (Liters) : 148Polyethylene inner shell.Maximum operating pressure – 150 psi.Maximum operating temperature – 120°F (threaded); 150°F (flanged).
Why WC FRP Pressure tank 14″ x 65″ (148L)?
Undeniably More Advanced Production Line: By Automatic Robots.Also a Higher Testing Standards and Requirements.Safer and high quality materials: Food Grade, HDPE Liner.More Certificates: NSF and ACS certificated, KTW and W270 are being applied.More Packing methods: single box, large box and pallet packing.Longer Warranty: 1 year for residential tanks and 1 year for commercial and industrial tanks.More combined components reduce costs: such as central tube, resin, cabinet etc.Lower Price and Faster delivery time.An FRP (Fiber Reinforced Plastic) vessel with a dome hole on the side
(often called a “dome hole vessel” or “side access vessel”). Is
designed for use in water treatment systems. Specifically to facilitate
easy access for checking, adding, or replacing filtration media without
needing to remove the main control valve and internal piping.
4d
Mbombela / Nelspruit
1
R 3,334.50
SavedSave
Please note that shipping and installation is not included.
Water Dispenser- IP-W260-2C
This Water Dispenser- IP-W260-2C is a fully automatic drinking water
purifier with a 4 stage filter filtration system. After installation,
the user only needs to open the water source switch to realize the
automatic water production function. Using ultra filtration membrane
technology, the treatment principle is pure physical filtration, no
chemical added, no chemical changes and chemical reactions, purified
water can be directly drink. Water
dispenser facilitates easily supply of drinking water. It is very
useful equipment and can supply cold, moderate and hot water. Water
dispensers play a vital role in workplaces, restaurants, hospitals and
public places for storing clean drinking water.
Water Dispenser- IP-W260-2C parameters:
Model Number – IP-W260-2CHeating Power/Capacity – 550W / 5L/H,85-95°CCooling Power/Capacity – 90W / 2L/H,5-10°CRelated Voltage/Frequency – 110-127V ~50/60Hz — 220-240V ~50/60HzBody materials – 1 mm Galvanized sheet iron side panel – -100% new ABS plasticCompressor Brand – Asbeila/ Danfu/ Anuodan/ LGPlastic parts Warranty – 1 yearWater Tank Type – Stretched water tankWater Tank Material – Standard SS304Connection Type – Soft connection ( food grade silicone tube)
Hot Tank Volume – 1.4LCold Tank Volume – 3.2L4 Stages Filter system – PPF+UDF+UF+T33UV – 6 WColor – White and Black
UF WATER PURIFIER
Rated Voltage /frequency – 220 V ～～/50 HzElectric shock resistance – IRated Power – 510 WRated Heating Power 420 WRated Cooling Power – 90 WInlet Water Pressure 0.1 0.4 M paRated purify water amount – 2000 LWater flow 60 L/hCooling Capacity – 10 2L/hHeating Capacity 90 ℃℃, 5L/hProper temperature 10 38Power consumption 1.5kW · h/24hFreezing Medium – 134a/32g Climate Type STWater/Temperature – Municipal water /5 38 Relative humidity 90
14d
Mbombela / NelspruitSave this search and get notified
when new items are posted!