Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Home & Garden
Some search tips we've found useful:
- Check the spelling of your search terms
- Use fewer or more general search terms
- Try browsing a category related to your search terms
Ads in other locations
6
R 8,500
SavedSave
3000VA Mecer Axpert Pure Sine Inverter + 2x 100Ah Battery Trolley
2mo
VERIFIED
1
R 14,999
SavedSave
Axpert MKS IV 5.6KVA With MPPT solar charger is equipped with MPPT solar charge controller to maximize and regulate DC power from the solar array for charging the battery bank. Transformerless design provides reliable power conversion in a compact size. The new generation of Axpert MKS comes with a built-in Wi-Fi function, mobile monitoring can be carried out through mobile applications. Data can be accessed and recorded in the inverter, which is convenient for tracking the operation status of the inverter. It also supports USB On-The go function for easy rewriting of internal parameters, data downloads, and software updateFeaturesPure sine wave MPPT solar inverter.Customizable status LED ring with RGB lights.Touchable button with 4.3" coloured LCD.Wide DC input range.Supports USB On-the-Go function.Data log events stored in the inverter.Built-in Wi-Fi for mobile monitoring (App is available).Reserved communication port for BMS.Battery independent function.Parallel operation with up to 9 units.SpecificationsModel: RCT-AXMK4-5.6K48VRated: 5600VA/5600W.InputVoltage: 230 VAC.Selectable Voltage Range: 170-280 VAC (For Personal Computers), 90-280 VAC (Home Appliances).Frequency Range: 55 Hz/60 Hz (Auto sensing).OutputAC Voltage Regulation (Batt. Mode): 230VAC + 5%.Efficiency (Peak): 93 %.Transfer Time: 10 ms (For Personal Computers); 20 ms (For Home Appliances).Waveform: Pure Sine Wave.Overload Capacity: 5s @ ≥ 150% Load, 10s @ ≥ 110% ~ 150% Load, 100ms @ ≥ 200% Load.BatteryBattery Voltage: 48 VDC.Floating Charge Voltage: 54 VDC.Overcharge Protection: 66 VDC.Solar charger & AC chargerSolar Charger Type: MPPT.Maximum PV Array Power: 6000 W.MPP Range @ Operating Voltage: 120 ~ 450 VDC.Maximum PV Array Open Circuit Voltage: 450 VDC.Maximum Solar Charge Current: 120 A.Maximum AC Charge Current: 120 A.PhysicalDimension, D x W x H (mm): 140 x 295 x 468.Net Weight (kgs): 12.0.Communication Interface USB/RS232/RS485/Wi-Fi/Dry-contact.EnvironmentHumidity: 5% to 95% Relative Humidity (Non-condensing).Operating Temperature: -10°C to 50°C.Storage Temperature: -15°C to 60°C.
6mo
1
R 9,999
SavedSave
MECER 2 year carry in warranty. Free shipping. This is not a stock item. Mecer warranty starts from date of shipping hence we order only on confirmed orders. WEBMASTERS NOTE:Not for installation sites close to the beach. Warranty will be void if installed within 1km from the beach. I recommend looking at an IP65 rated unit. I recommend the DEYE 5kW inverter insteadMecer code: SOL-I-AX-5VP FeaturesPure sine wave solar inverterOutput power factor 1Selectable high power charging currentWide DC input rangeSelectable input voltage range for home appliances and personal computersConfigurable AC/Solar input priority via LCD settingCompatible to AC mains or generator powerAuto restart while AC is recoveringOverload and short circuit protectionBattery equalization for optimized battery performance and lifecycleCold start functionOptional anti-dust kit Technical SpecificationsGeneralModel: Axpert VM 5000-48Rated Power: 5000 VA / 5000 W.Parallel capability: NoneInputVoltage: 230 VAC.Selectable Voltage Range: 170-280 VAC (For Personal Computers); 90-280 VAC (For Home Appliances).Frequency Range: 50 Hz/60 Hz (Auto sensing).OutputAC Voltage Regulation (Batt. Mode): 230VAC ± 5%.Surge Power: 10000 VA.Efficiency (Peak): 90%~93%.Transfer Time: 10 ms (For Personal Computers); 20 ms (For Home Appliances).Waveform: Pure sine wave.Battery & AC ChargerBattery Voltage: 48 VDC.Floating Charge Voltage: 54 VDC.Overcharge Protection: 63 VDC.Solar Charger & AC ChargerPWM:Maximum PV Array Open Circuit Voltage: 105 VDCMaximum PV Array Power: 2400WMaximum Solar Charge Current: 50AMaximum AC Charge Current: 60AMaximum Charge Current: 110APhysicalDimension, D x W x H (mm): 100 x 300 x 440Net Weight (kgs): 8.5Communication Interface: USB / RS232All inverters must be installed by a qualified electrical wireman or Master electrician with a valid registration with the Department of Labour. A valid electrical certificate of compliance (Coc) must be issued once installed, specific to the installation of the backup or solar system. The installation must be compliant with SANS 10142 and ALL its parts. Any warranty claim submitted without installation photos, a valid Coc and proof of a qualified wireman/master electrician installing the unit, can be rejected and will render the warranty claim null at void.The warranty does not cover damage resulting from:· Power surge· Under-voltage· Over-voltage· Lightning· Corrosion· Sea spray· Condensation· Water damage· Dust or any solid particles· Sand· Insects· Lizards· Excessive heat exposure· Weather damage· Negligence by the installer or homeowner· Incorrect installation· Inadequate protection device rating· Tampering (broken seal)· Dirty filters· Exceeding the maximum power rating, current or voltage for the input solar circuit, DC battery input, AC input and AC output.
6mo
1
R 8,500
SavedSave
24 month warranty MECER carry in warranty. Free shipping.MECER CODE: SOL-I-AX-3MPLUS24MECER Axpert MKS is equipped with a 1500 MPPT solar charge controller to regulate DC power from the solar array for charging the battery bank. Transformerless design provides reliable power conversion in compact size. Besides, it’s worry-free to start up motor-type loads such as refrigerators, motors, pumps, compressors and laser printers as well as electronic loads like TVs, Computers, power tool and battery chargers. Requires a minimum of 2 x 12V batteries.Pure sine wave inverterOutput power factor 1Built in 1500W MPPT solar charge controller. Recommended for backup or solar.Selectable input voltage range for home appliances and personal computersSelectable charging current based on applicationConfigurable AC/Solar input priority via LCD settingCompatible to mains voltage or generator powerAuto restart while AC is recoveringOverload and short circuit protectionBattery equalization for optimized battery performance and life-cycle Cold start functionNOT Parallel compatible Recommended for backup purposes and/or solar
6mo
1
R 5,970.80
SavedSave
MECER carry in warranty till 22 July 2024MECER Axpert VP is equipped with a 1,2kW PWM solar charge controller to regulate DC power from the solar array for charging the battery bank. Transformerless design provides reliable power conversion in compact size. Requires a minimum of 2 x 12V batteries.Pure sine wave inverterOutput power factor 1Built in 1,2kW PWM solar charge controller. Selectable input voltage range for home appliances and personal computersSelectable charging current based on applicationConfigurable AC/Solar input priority via LCD settingCompatible to mains voltage or generator powerAuto restart while AC is recoveringOverload and short circuit protectionBattery equalization for optimized battery performance and life-cycle Cold start functionNOT Parallel compatible Recommended for backup purposesNOTE:All inverters must be installed by a qualified electrical wireman or Master electrician with a valid registration with the Department of Labour. A valid electrical certificate of compliance (Coc) must be issued once installed, specific to the installation of the backup or solar system. The installation must be compliant with SANS 10142 and ALL its parts. Any warranty claim submitted without installation photos, a valid Coc and proof of a qualified wireman/master electrician installing the unit, can be rejected and will render the warranty claim null at void.The warranty does not cover damage resulting from:· Power surge· Under-voltage· Over-voltage· Lightning· Corrosion· Sea spray· Condensation· Water damage· Dust or any solid particles· Sand· Insects· Lizards· Excessive heat exposure· Weather damage· Negligence by the installer or homeowner· Incorrect installation· Inadequate protection device rating· Tampering (broken seal)· Dirty filters· Exceeding the maximum power rating, current or voltage for the input solar circuit, DC battery input, AC input and AC output.The warranty will be void if the unit is:· Not installed as per manufacturers specifications· Not installed with a minimal 40kA surge protection unit for both live and neutral wires from the AC incoming supply· Not installed with a minimal 40kA surge protection unit for both positive and negative wires from the AC incoming supply· Not protected by the calculated and required 2 pole breakers for the input and output of the inverter· Not installed with a changeover switch· The battery input must be protected by a rated fuse for both the negative and positive connections, within the calculated PSCC ratings.· Tampered with (attempted to open the unit)· Visible damage to the unit
6mo
1
R 5,799
SavedSave
Sold to qualified and registered electricians only. 1 year warranty. No support offered to end-users or DIY customers. This is a small system and is not for taking households off-gridCost-effective solar inverter This is a multi-functional inverter/charger, combining functions of inverter, solar charger and battery charger to offer uninterruptible power support in portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.Requires 12V DC battery input. You can parallel up to 3 x 12V batteries to maintain the voltage.There is a 500W MPPT Solar input to trickle charge the battery. This is inverter is more for backup purposes. This is a pure sine wave inverterRecommended application: Lights and LED TV, Decoder, alarm and fridge (must be under 1000W)The box excludes any electrical power cables. An electrician is required to install this unit. NOTE:All inverters must be installed by a qualified electrical wireman or Master electrician with a valid registration with the Department of Labour. A valid electrical certificate of compliance (Coc) must be issued once installed, specific to the installation of the backup or solar system. The installation must be compliant with SANS 10142 and ALL its parts. Any warranty claim submitted without installation photos, a valid Coc and proof of a qualified wireman/master electrician installing the unit, can be rejected and will render the warranty claim null at void.The warranty does not cover damage resulting from:· Power surge· Under-voltage· Over-voltage· Lightning· Corrosion· Sea spray· Condensation· Water damage· Dust or any solid particles· Sand· Insects· Lizards· Excessive heat exposure· Weather damage· Negligence by the installer or homeowner· Incorrect installation· Inadequate protection device rating· Tampering (broken seal)· Dirty filters· Exceeding the maximum power rating, current or voltage for the input solar circuit, DC battery input, AC input and AC output.
6mo
1
R 4,111.25
SavedSave
SOL-I-AX-1VPMecer Axpert V 1kW Pure Sine Wave Inverter with 600W PWM controllerMecer Axpert V 1kW Pure Sine Wave Inverter with 600W PWM controller, Configurable AC/Solar Input priority via LCD setting, PWM Solar charger Type, 600W Maximum PV Array power, 55 VDC Maximum PV Array open Circuit voltage, USB & RS-232 communication Port, 12 VDC battery voltage, 10ms transfer timeOverview:Axpert V 1K/2K/3KVA/5KVA Cost-effective solar inverterThis is a multi-functional inverter/charger, combining functions of inverter, solar charger and battery charger to offer uninterruptible power support in portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.Features:Pure sine wave solar inverterOutput power factor 1Selectable high power charging currentWide DC input rangeSelectable input voltage range for home appliances and personal computersConfigurable AC/Solar input priority via LCD settingCompatible with mains voltage or generator powerAuto restart while AC is recoveringOverload and short circuit protectionSmart battery charger design for optimized battery performanceCold start functionOptional anti-dust kitSpecificationsProduct CodeSOL-I-AX-1VPMODELAxpert VP1000-12Rated Power1000 VA / 1000 WINPUTVoltage230 VACSelectable Voltage Range170-280 VAC (For Personal Computers), 90-280 VAC (For Home Appliances)Frequency Range60/50 Hz (Auto sensing)OUTPUTAC Voltage Regulation (Batt. Mode)230 VAC ± 5%Surge Power2000 VAEfficiency (Peak)90%Transfer Time10 ms (For Personal Computers), 20 ms (For Home Appliances)WaveformPure Sine WaveBATTERYBattery Voltage12 VDCFloating Charge Voltage13.5 VDCOvercharge Protection16 VDCSOLAR CHARGER & AC CHARGERSolar Charger TypePWMMaximum PV Array Open Circuit Voltage55 VDCMaximum PV Array Power600WMPPT Range @ Operating VoltageN/AMaximum Solar Charge Current50AMaximum AC Charge Current20AMaximum Charging Current50APHYSICALDimension, D X W X H (mm)88 x 225 x 320Net Weight (kgs)4.4Communication PortUSB, RS-232OPERATING ENVIRONMENTOperating Humidity5% to 95% Relative Humidity(Non-condensing)Operating Temperature-10°C to 50°CStorage Temperature-15°C to 60°C
6mo
1
Negotiable
NEGOTIABLE
SavedSave
US3000B is the latest HESS battery system provided by Pylontech with our abundant experience of delivering our product into more than 5000 homes. It’ s long life character, highest energy and power density in the industry, fashionable design, easiness of installation and expansion, all reflects the real requirements of end users and strongest technical capability of Pylontech.
Main Features
Compatible with Voltronic Axpert & Infinisolar units
Vertical industry integration ensures more than 6000 cycles with 80% DoD
Deliver up to 5KW with single module (3.5KWh)
Modular design gives the end customers the power of choice of capacity
Compatible with most of the available Hybrid inverters
Simple buckle fixing minimize the installation time and cost
Compact and fashionable design fits in your sweet home environment
Safety Cert.TÜVCEUN38.
Developed with our own LFP (lithium iron phosphate) cell to ensure the highest safety and most promising cycle life.
Self-designed BMS protects the cell in all angels such as abnormal temperature, current, voltage, SoC, SoH
Compatible with Full circles 12U Battery Cabinet
No maintenance and easy installation saves the valuable main power.
9mo
VERIFIED
2
Contact f/price
SavedSave
IN STOCK – DISPATCHED WITHIN 1 (ONE) WORKING DAY
This kit includes:
1X Hubble X-101 5.5kWh Lithium-Ion Rack-Mounted Battery
1X RCT AXPERT King MK2 5000VA / 5000W Pure Sine Wave Off-Grid Inverter with 6000W MPPT Solar Controller
1X Battery DC Disconnect Switch
2X 100A Fuses
Battery Cables with lugs
PB-5 AC Protection Box (required for DB Board Installations)
10mo
VERIFIED
4
Contact f/price
SavedSave
This kit includes:
2X Rentech RT 5.0 LiFePO4 5.12kWh Batteries with 6000 cycles – 5.12kWh per battery (TOTAL = 10.24kWh)
Axpert Max-E 11kW / 11kVa Pure Sine Wave Inverter with 11000W dual MPPT solar controller and Wi-Fi – 11 000W Inverter
1X 2P Battery disconnect switch
2X 160A Fuses
PB-11 AC Protection Box
RT-5.0 Battery Cables
RT-5.0 Parallel Connection Cables
Set of battery cables with lugs
Connect up to 20X 550W PV Panels
All Inverters and Batteries must be installed by a Qualified Electrical Wireman or Master Electrician with a valid registration with the Department of Labour. A valid Electrical Certificate of Compliance (COC) must be issued once installed, specific to the installation of Backup or Solar System. The installation must be compliant with SANS 10142. Any warranty claim must be submitted with the warranty / repair form, Installation Photos, A valid COC and Proof of a Qualified Wireman or Master Electrician installing the unit. Failure to do so may result in the claim being rejected and will render the warranty null and void.
10mo
VERIFIED
Successfully Added to List
View and manage your saved ads in your account.