Please note that our Terms & Conditions and Privacy Notice are applicable.
On Promotion in Home & Garden
Pay OnlineSECURELYEASY DELIVERY OR COLLECTION
Buy with confidence. Secure payment options & nationwide delivery. Learn more
Filter & refine
Clear All
Suggested
Results for pump motor in "pump motor" in Home & Garden Supplies in South Africa in South Africa
7
R 2,500
SavedSave
Closed an old pool. Selling the 2 bag pool filter, 0.6kw pump, motor, led light, housing and DB box.
7d
12
R 3,950
SavedSave
Davey single stage wide impeller PUMP ONLY. Maximum delivery volume when connected to a Honda GX390 motor is 900 litres per minute unrestricted as per manufacturers specifications (refer image 12).Prospective buyers to purchase upon viewing in person. If the ad appears then it is available.
3d
Pietermaritzburg
1
R 22,510.74
SavedSave
Please note that shipping and installation is not included.WDP with PVDF body:Exceptional chemical compatibility.Superior thermal stability and resistance to stress cracks.High corrosion resistance.
The Seko HYDRAKOS – Water-Driven Pumps was created to solve your dosing problems in multiple areas:Agricultural:
Firstly it is used to inject fertilizer, pesticides and other additives into irrigation water. It can rely on their equipment to help achieve healthy crops and enjoy improved yields. Poultry farming, pig rearing and rabbit breeding. These versatile systems give breeders peace of mind at all times.Water Treatment and drinking water:
Also for every chemical dosing requirement. As a matter of fact this next-generation systems help operators achieve optimal system performances and chemical consumption. As a result SEKO’s water-driven pumps helping operators to cover a multitude of disinfection requirements, ensure managers can maintain the highest standards of hygieneIndustry:From vibro-abrasion, de-greasing and legionella control to mineral dosing and wetting agent injection, these versatile systems cover myriad processes. HYDRAKOS pumps offer high-precision chemical injection solutions for tunnel wash, self-serve and gantry wash systems and many other commercial car wash applications.How does it work:
Basically water-driven pump technology is based on a hydraulic motor pump activated only by pressure and water flow. Hence installed directly on the water supply line, the pump operates by using the water flow rate as a source of energy.The pressure and flow rate of the water actuates the motor piston which drives a second, product-dosing piston. The product is injected and mixed continuously with the water from the mains supply at the selected dosing rate % (rate of product/water incorporation).The dose of concentrated product is directly proportional to the volume of water passing through the pump, independent of variations in the flow rate and pressure of the mains water supply.Hydraulic Motor:The motor piston moves under water pressure, with a system of valves allowing the movement to be reversed.Each piston cycle corresponds to a predetermined volume of water which passes through the pump (motor volume). The speed of the motor varies proportionally with water flow.Dosing Assembly:
Courtesy of the dosing body’s adjustable capacity, the motor-driven dosing piston continuously injects a fixed volume of product according to the volume of water passing through. Therefore, the operating principle ensures constant proportional dosing independent of fluctuating flow rate and water pressure.
12d
Mbombela / Nelspruit
1
R 27,106.27
SavedSave
Please note that shipping and installation is not included.WDP with PVDF body:
Exceptional chemical compatibility.Superior thermal stability and resistance to stress cracks.High corrosion resistance.
The Seko HYDRAKOS – Water-Driven Pumps was created to solve your dosing problems in multiple areas:
Agricultural:Firstly it is used to inject fertilizer, pesticides and other additives into irrigation water. It can rely on their equipment to help achieve healthy crops and enjoy improved yields. Poultry farming, pig rearing and rabbit breeding. These versatile systems give breeders peace of mind at all times.
Water Treatment and drinking water:Also for every chemical dosing requirement. As a matter of fact this next-generation systems help operators achieve optimal system performances and chemical consumption. As a result SEKO’s water-driven pumps helping operators to cover a multitude of disinfection requirements, ensure managers can maintain the highest standards of hygiene.
Industry:From vibro-abrasion, de-greasing and legionella control to mineral dosing and wetting agent injection, these versatile systems cover myriad processes. HYDRAKOS pumps offer high-precision chemical injection solutions for tunnel wash, self-serve and gantry wash systems and many other commercial car wash applications.
How does it work:
Basically water-driven pump technology is based on a hydraulic motor pump activated only by pressure and water flow. Hence installed directly on the water supply line, the pump operates by using the water flow rate as a source of energy.The pressure and flow rate of the water actuates the motor piston which drives a second, product-dosing piston. The product is injected and mixed continuously with the water from the mains supply at the selected dosing rate % (rate of product/water incorporation).The dose of concentrated product is directly proportional to the volume of water passing through the pump, independent of variations in the flow rate and pressure of the mains water supply.
Hydraulic Motor:
The motor piston moves under water pressure, with a system of valves allowing the movement to be reversed.Each piston cycle corresponds to a predetermined volume of water which passes through the pump (motor volume). The speed of the motor varies proportionally with water flow.
Dosing Assembly:
Courtesy of the dosing body’s adjustable capacity, the motor-driven dosing piston continuously injects a fixed volume of product according to the volume of water passing through. Therefore, the operating principle ensures constant proportional dosing independent of fluctuating flow rate and water pressure.
12d
Mbombela / Nelspruit
1
R 15,605.15
SavedSave
Please note that shipping and installation is not included.WDP with PVDF body:Exceptional chemical compatibility.Superior thermal stability and resistance to stress cracks.High corrosion resistance.The Seko HYDRAKOS – Water-Driven Pumps was created to solve your dosing problems in multiple areas:Agricultural:Firstly it is used to inject fertilizer, pesticides and other additives into irrigation water. It can rely on their equipment to help achieve healthy crops and enjoy improved yields. Poultry farming, pig rearing and rabbit breeding. These versatile systems give breeders peace of mind at all times.Water Treatment and drinking water:Also for every chemical dosing requirement. As a matter of fact this next-generation systems help operators achieve optimal system performances and chemical consumption. As a result SEKO’s water-driven pumps helping operators to cover a multitude of disinfection requirements, ensure managers can maintain the highest standards of
hygiene.Industry:From vibro-abrasion, de-greasing and legionella control to mineral dosing and wetting agent injection, these versatile systems cover myriad processes. HYDRAKOS pumps offer high-precision chemical injection solutions for tunnel wash, self-serve and gantry wash systems and many other commercial car wash applications.How does it work:Basically water-driven pump technology is based on a hydraulic motor pump activated only by pressure and water flow. Hence installed directly on the water supply line, the pump operates by using the water flow rate as a source of energy.The pressure and flow rate of the water actuates the motor piston which drives a second, product-dosing piston. The product is injected and mixed continuously with the water from the mains supply at the selected dosing rate % (rate of product/water incorporation).The dose of concentrated product is directly proportional to the volume of water passing through the pump, independent of variations in the flow rate and pressure of the mains water supply.Hydraulic Motor:The motor piston moves under water pressure, with a system of valves allowing the movement to be reversed.Each piston cycle corresponds to a predetermined volume of water which passes through the pump (motor volume). The speed of the motor varies proportionally with water flow.Dosing Assembly:Courtesy of the dosing body’s adjustable capacity, the motor-driven dosing piston continuously injects a fixed volume of product according to the volume of water passing through. Therefore, the operating principle ensures constant proportional dosing independent of fluctuating flow rate and water pressure.
13d
Mbombela / Nelspruit
1
R 15,605.15
SavedSave
Please note that shipping and installation is not included.WDP with PVDF body:
Exceptional chemical compatibility.Superior thermal stability and resistance to stress cracks.High corrosion resistance.The Seko HYDRAKOS – Water-Driven Pumps was created to solve your dosing problems in multiple areas:Agricultural:Firstly it is used to inject fertilizer, pesticides and other additives into irrigation water. It can rely on their equipment to help achieve healthy crops and enjoy improved yields. Poultry farming, pig rearing and rabbit breeding. These versatile systems give breeders peace of mind at all times.Water Treatment and drinking water:Also for every chemical dosing requirement. As a matter of fact this next-generation systems help operators achieve optimal system performances and chemical consumption. As a result SEKO’s water-driven pumps helping operators to cover a multitude of disinfection requirements, ensure managers can maintain the highest standards of hygiene.Industry:From vibro-abrasion, de-greasing and legionella control to mineral dosing and wetting agent injection, these versatile systems cover myriad processes. HYDRAKOS pumps offer high-precision chemical injection solutions for tunnel wash, self-serve and gantry wash systems and many other commercial car wash applications.How does it work:Basically water-driven pump technology is based on a hydraulic motor pump activated only by pressure and water flow. Hence installed directly on the water supply line, the pump operates by using the water flow rate as a source of energy.The pressure and flow rate of the water actuates the motor piston which drives a second, product-dosing piston. The product is injected and mixed continuously with the water from the mains supply at the selected dosing rate % (rate of product/water incorporation).The dose of concentrated product is directly proportional to the volume of water passing through the pump, independent of variations in the flow rate and pressure of the mains water supply.Hydraulic Motor:The motor piston moves under water pressure, with a system of valves allowing the movement to be reversed.Each piston cycle corresponds to a predetermined volume of water which passes through the pump (motor volume). The speed of the motor varies proportionally with water flow.Dosing Assembly:Courtesy of the dosing body’s adjustable capacity, the motor-driven dosing piston continuously injects a fixed volume of product according to the volume of water passing through. Therefore, the operating principle ensures constant proportional dosing independent of fluctuating flow rate and water pressure.
13d
Mbombela / Nelspruit
12
R 10,500
NEGOTIABLE
SavedSave
Refurbished Flygt Industrial Submersible Pump Parts & Spares (Job Lot)
Description:
Selling a collection of heavy-duty industrial pump components, likely from a Flygt wastewater/sewage system. Ideal for pump refurbishment businesses or as spare parts for mining/industrial applications.
Included in the lot:
Main Pump Volute (Casing): Cast iron housing, stamped with a part number. Excellent physical condition, no visible cracks.
Vortex Impeller: Non-clogging heavy-duty impeller designed for solids/sewage.
Motor Stator & Rotor: Large industrial electric motor core (stator shows some wear/burn, may need a rewind; rotor is plastic-wrapped for protection).
Submersible Power Lead: Approximately [Insert Length in Meters] of heavy-duty, shielded submersible power cable.
Hardware: Includes a large manual Gate Valve with handwheel and an aluminum seal/cooling plate.
Condition: Sold "Voetstoots" / As-Is. Most parts are disassembled and ready for inspection
View in Penhill Estate
Price: R10500 (if you know the items you know it's worth, thank you)
Contact 0️⃣7️⃣9️⃣-3️⃣3️⃣9️⃣-7️⃣4️⃣3️⃣5️⃣
3d
VERIFIED
1
R 27,106.27
SavedSave
Please note that shipping and installation is not included.WDP with PVDF body:
Exceptional chemical compatibility.Superior thermal stability and resistance to stress cracks.High corrosion resistance.The Seko HYDRAKOS – Water-Driven Pump was created to solve your dosing problems in multiple areas:
Agricultural:Firstly it is used to inject fertilizer, pesticides and other additives into irrigation water. It can rely on their equipment to help achieve healthy crops and enjoy improved yields. Poultry farming, pig rearing and rabbit breeding. These versatile systems give breeders peace of mind at all times.Water Treatment and drinking water:
Also for every chemical dosing requirement. As a matter of fact this next-generation systems help operators achieve optimal system performances and chemical consumption. As a result SEKO’s water-driven pumps helping operators to cover a multitude of disinfection requirements, ensure managers can maintain the highest standards of hygiene.Industry:From vibro-abrasion, de-greasing and legionella control to mineral dosing and wetting agent injection, these versatile systems cover myriad processes. HYDRAKOS pumps offer high-precision chemical injection solutions for tunnel wash, self-serve and gantry wash systems and many other commercial car wash applications.How does it work:
Basically water-driven pump technology is based on a hydraulic motor pump activated only by pressure and water flow. Hence installed directly on the water supply line, the pump operates by using the water flow rate as a source of energy.The pressure and flow rate of the water actuates the motor piston which drives a second, product-dosing piston. The product is injected and mixed continuously with the water from the mains supply at the selected dosing rate % (rate of product/water incorporation).The dose of concentrated product is directly proportional to the volume of water passing through the pump, independent of variations in the flow rate and pressure of the mains water supply.Hydraulic Motor:The motor piston moves under water pressure, with a system of valves allowing the movement to be reversed.Each piston cycle corresponds to a predetermined volume of water which passes through the pump (motor volume). The speed of the motor varies proportionally with water flow.Dosing Assembly:
Courtesy of the dosing body’s adjustable capacity, the motor-driven dosing piston continuously injects a fixed volume of product according to the volume of water passing through. Therefore, the operating principle ensures constant proportional dosing independent of fluctuating flow rate and water pressure.
12d
Mbombela / Nelspruit
1
R 20,176.11
SavedSave
Please note that shipping and installation is not included.WDP with PVDF body:Exceptional chemical compatibility.Superior thermal stability and resistance to stress cracks.High corrosion resistance.
The Seko HYDRAKOS – Water-Driven Pumps was created to solve your dosing problems in multiple areas:Agricultural:
Firstly it is used to inject fertilizer, pesticides and other additives into irrigation water. It can rely on their equipment to help achieve healthy crops and enjoy improved yields. Poultry farming, pig rearing and rabbit breeding. These versatile systems give breeders peace of mind at all times.Water Treatment and drinking water:
Also for every chemical dosing requirement. As a matter of fact this next-generation systems help operators achieve optimal system performances and chemical consumption. As a result SEKO’s water-driven pumps helping operators to cover a multitude of disinfection requirements, ensure managers can maintain the highest standards of hygiene.Industry:
From vibro-abrasion, de-greasing and legionella control to mineral dosing and wetting agent injection, these versatile systems cover myriad processes. HYDRAKOS pumps offer high-precision chemical injection solutions for tunnel wash, self-serve and gantry wash systems and any other commercial car wash applications.How does it work:
Basically water-driven pump technology is based on a hydraulic motor pump activated only by pressure and water flow. Hence installed directly on the water supply line, the pump operates by using the water flow rate as a source of energy.The pressure and flow rate of the water actuates the motor piston which drives a second, product-dosing piston. The product is injected and mixed continuously with the water from the mains supply at the
selected dosing rate % (rate of product/water incorporation).The dose of concentrated product is directly proportional to the volume of water passing through the pump, independent of variations in the flow rate and pressure of the mains water supply.Hydraulic Motor:
The motor piston moves under water pressure, with a system of valves allowing the movement to be reversed.Each piston cycle corresponds to a predetermined volume of water which passes through the pump (motor volume). The speed of the motor varies proportionally with water flow.Dosing Assembly:Courtesy of the dosing body’s adjustable capacity, the motor-driven dosing piston continuously injects a fixed volume of product according to the volume of water passing through. Therefore, the operating principle ensures constant proportional dosing independent of fluctuating flow rate and water pressure.
12d
Mbombela / Nelspruit
1
R 20,176.11
SavedSave
Please note that shipping and installation is not included.WDP with PVDF body:
Exceptional chemical compatibility.Superior thermal stability and resistance to stress cracks.High corrosion resistance.The Seko HYDRAKOS Water Driven Pump 2500 l/ph 0,2-2% PVDF/EPDM was created to solve your dosing problems in multiple areas:Agricultural:
Firstly it is used to inject fertilizer, pesticides and other additives into irrigation water. It can rely on their equipment to help achieve healthy crops and enjoy improved yields. Poultry farming, pig rearing and rabbit breeding. These versatile systems give breeders peace of mind at all times.Water Treatment and drinking water:Also for every chemical dosing requirement. As a matter of fact this next-generation systems help operators achieve optimal system performances and chemical consumption. As a result SEKO’s water-driven pumps helping operators to cover a multitude of disinfection requirements, ensure managers can maintain the highest standards of hygiene.Industry:From vibro-abrasion, de-greasing and legionella control to mineral dosing and wetting agent injection, these versatile systems cover myriad processes.HYDRAKOS pumps offer high-precision chemical injection solutions for tunnel wash, self-serve and gantry wash systems and many other commercial car wash applications.How does it work:
Basically water-driven pump technology is based on a hydraulic motor pump activated only by pressure and water flow. Hence installed directly on the water supply line, the pump operates by using the water flow rate as a source of energy.The pressure and flow rate of the water actuates the motor piston which drives a second, product-dosing piston. The product is injected and mixed continuously with the water from the mains supply at the selected dosing rate % (rate of product/water incorporation).The dose of concentrated product is directly proportional to the volume of water passing through the pump, independent of variations in the flow rate and pressure of the mains water supply.Hydraulic Motor:
The motor piston moves under water pressure, with a system of valves allowing the movement to be reversed.Each piston cycle corresponds to a predetermined volume of water which passes through the pump (motor volume). The speed of the motor varies proportionally with water flow.Dosing Assembly:
Courtesy of the dosing body’s adjustable capacity, the motor-driven dosing piston continuously injects a fixed volume of product according to the volume of water passing through. Therefore, the operating principle ensures constant proportional dosing independent of fluctuating flow rate and water pressure.
12d
Mbombela / Nelspruit
1
R 28,495
SavedSave
Please note that shipping and installation is not included.DAB grinder FX submersible pump 0.7kW single phase with a shredder designed for lifting and transferring wastewater in civil and commercial environments. Grinder FX is certified EN 12050-1.The presence of the shredder makes the pump suitable for systems with small diameter pipes or those requiring high pressures. Shredder in AISI 630 stainless steel. Ideal pump for replacements thanks to its reduced dimensions and to both flanged and threaded delivery ports.
Technical Data of the DAB grinder FX submersible pump 0.7kW single phase
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 \ ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
Construction features of the pumpPump body and impeller in cast iron, shredder in AISI 630. Motor shaft in AISI 304 stainless steel. Double mechanical seal in SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid, independent of the direction of rotation. Delivery port both flanged and threaded.
Construction features of the motorSingle-phase asynchronous motor (MA / MNA versions) and three-phase version motor (TNA versions). The rotor is mounted on lubricated bearings. Continuous operation in S1 with the motor completely immersed. Dry running for a maximum time of 10 minutes. Over-temperature sensors in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase versions with starter and capacitor in a separate panel, MA versions with float for automatic operation. In the three-phase motors the over-temperature sensor connection is responsibility of the user.
15d
Mbombela / Nelspruit
1
R 30,389
SavedSave
Please note that shipping and installation is not included.DAB grinder FX submersible pump 1.1kW three phase with a shredder designed for lifting and transferring wastewater in civil and commercial environments. Grinder FX is certified EN 12050-1.The presence of the shredder makes the pump suitable for systems with small diameter pipes or those requiring high pressures. Shredder in AISI 630 stainless steel. Ideal pump for replacements thanks to its reduced dimensions and to both flanged and threaded delivery ports.
Technical Data of the DAB grinder FX submersible pump 1.1kW three phase
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
Construction features of the pump: Pump body and impeller in cast iron, shredder in AISI 630. Motor shaft in AISI 304 stainless steel. Double mechanical seal in SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid, independent of the direction of rotation. Delivery port both flanged and threaded.Construction features of the motor: Single-phase asynchronous motor (MA / MNA versions) and three-phase version motor (TNA versions). The rotor is mounted on lubricated bearings. Continuous operation in S1 with the motor completely immersed. Dry running for a maximum time of 10 minutes. Over-temperature sensors in the motor windings with intervention threshold at +130°C.Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase: versions with starter and capacitor in a separate panel, MA versions with float for automatic operation. In the three-phase motors the over-temperature sensor connection is responsibility of the user.
15d
Mbombela / Nelspruit
1
R 11,779
SavedSave
Please note that shipping and installation is not included.Firstly Stainless steel Feka vs submersible pumps 1kW – single phase with micro cast steel liquid vortex impeller, suitable for lifting sewage and drain water in general containing solid matter with size up to 50 mm.
Construction Features Of The Pump
AISI 304 stainless steel pump body, seal cover, motor cover, and cap with handle insulating rubber coated. Micro cast steel impeller. Insulating rubber covered handle. AISI 316 stainless steel motor shaft. Double mechanical seal with interposed oil chamber (non-toxic oil) in carbon-alumina on the motor side, and silicon carbide/silicon carbide on the pump side.Mechanical seal: Silicon Carbide
Construction Features Of The Motor
Dry, asynchronous and waterproof motor, cooled by the pumped liquid. Rotor running on permanently lubricated ball bearings, selected to ensure low noise and durability. Over current protection as standard for the single-phase version, optional for the three-phase version. Permanently connected capacitor in the single-phase version.
Continuous duty with liquid temperature 35 °C and completely submerged pump. The single-phase version can be supplied with float for automatic operation. Mechanical seal: Carbon/Alumina.DAB Feka vs submersible pumps 1kW – single phase Number of poles: 2 Max starts/hour: 20Operating range: From 0 to 32 m3/h with head up to 14 meters.Pumped liquid: Sewage water and used water in general, non aggressive.Free passage: 50 mm.Liquid temperature range: From 0 °C to +35 °C for domestic use (EN 60335-2-41). From 0 °C to +50 °C for other uses.Maximum ambient temperature for operation with motor above water: +40 °CMaximum immersion depth: 7 meters.Motor protection class: IP 68Insulation class: FPower Inputs: 1 x 220 V -240 V – 50Hz single phaseInstallation: Fixed or portable, vertical positionPower Cable: 10 meter H07RN-F, with plug for the single phase version.Input Voltage A: 6.63Output Voltage A: 31HP: 1.36
15d
Mbombela / Nelspruit
1
R 27,226
SavedSave
Please note that shipping and installation is not included.DAB grinder FX submersible pump 0.7kW three phase with a shredder designed for lifting and transferring wastewater in civil and commercial environments. Grinder FX is certified EN 12050-1.
The presence of the shredder makes the pump suitable for systems with small diameter pipes or those requiring high pressures. Shredder in AISI 630 stainless steel. Ideal pump for replacements thanks to its reduced dimensions and to both flanged and threaded delivery ports.
Technical Data of the DAB grinder FX submersible pump 0.7kW three phase
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
Construction features of the pump: Pump body and impeller in cast iron, shredder in AISI 630. Motor shaft in AISI 304 stainless steel. Double mechanical seal in SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid, independent of the direction of rotation. Delivery port both flanged and threaded.Construction features of the motor: Single-phase asynchronous motor (MA / MNA versions) and three-phase version motor (TNA versions). The rotor is mounted on lubricated bearings. Continuous operation in S1 with the motor completely immersed. Dry running for a maximum time of 10 minutes. Over-temperature sensors in the motor windings with intervention threshold at +130°C.Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase: versions with starter and capacitor in a separate panel, MA versions with float for automatic operation. In the three-phase motors the over-temperature sensor connection is responsibility of the user.
15d
Mbombela / Nelspruit
1
R 36,071
SavedSave
Please note that shipping and installation is not included.DAB grinder FX submersible pump 2.2kW three phase with a shredder designed for lifting and transferring wastewater in civil and commercial environments. Grinder FX is certified EN 12050-1.
The presence of the shredder makes the pump suitable for systems with small diameter pipes or those requiring high pressures. Shredder in AISI 630 stainless steel. Ideal pump for replacements thanks to its reduced dimensions and to both flanged and threaded delivery ports.
Technical Data of the DAB grinder FX submersible pump 2.2kW three phase
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
Construction features of the pump: Pump body and impeller in cast iron, shredder in AISI 630. Motor shaft in AISI 304 stainless steel. Double mechanical seal in SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid, independent of the direction of rotation. Delivery port both flanged and threaded.Construction features of the motor: Single-phase asynchronous motor (MA / MNA versions) and three-phase version motor (TNA versions). The rotor is mounted on lubricated bearings. Continuous operation in S1 with the motor completely immersed. Dry running for a maximum time of 10 minutes. Over-temperature sensors in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase versions with starter and capacitor in a separate panel, MA versions
with float for automatic operation. In the three-phase motors the over-temperature sensor connection is responsibility of the user.
15d
Mbombela / Nelspruit
1
R 8,352
SavedSave
Please note that shipping and installation is not includedFirstly Stainless steel DAB Feka vs submersible pumps 0.55kW – three phase with micro cast steel liquid vortex impeller, suitable for lifting sewage and drain water in general containing solid matter with size up to 50 mm.
Construction Features Of The Pump
AISI 304 stainless steel pump body, seal cover, motor cover, and cap with handle insulating rubber coated. Micro cast steel impeller. Insulating rubber covered handle. AISI 316 stainless steel motor shaft. Double mechanical seal with interposed oil chamber (non-toxic oil) in carbon-alumina on the motor side, and silicon carbide/silicon carbide on the pump side. Mechanical seal: Silicon Carbide
Construction Features Of The Motor
Dry, asynchronous and waterproof motor, cooled by the pumped liquid. Rotor running on permanently lubricated ball bearings, selected to ensure low noise and durability. Over current protection as standard for the single-phase version, optional for the three-phase version. Permanently connected capacitor in the single-phase version.
Continuous duty with liquid temperature 35 °C and completely submerged pump. The single-phase version can be supplied with float for automatic operation. Mechanical seal: Carbon/AluminaDAB Feka vs submersible pumps 0.55kW – three phase Number of poles: 2 Max starts/hour: 20Operating range: From 0 to 32 m3/h with head up to 14 meters.Pumped liquid: Sewage water and used water in general, non aggressive.Free passage: 50 mm.Liquid temperature range: From 0 °C to +35 °C for domestic use (EN 60335-2-41). From 0 °C to +50 °C for other uses.Maximum ambient temperature for operation with motor above water: +40 °CMaximum immersion depth: 7 meters.Motor protection class: IP 68Insulation class: FPower Inputs: 3 x 400 V ~Installation: Fixed or portable, vertical positionPower Cable: 10 meter H07RN-F, with plug for the single phase version.Input Voltage A: 1.64Output Voltage A: 11HP: 0.75
15d
Mbombela / Nelspruit
1
R 2,832.45
SavedSave
Please note that shipping and installation is not included.Application Limit:
Temperature of the liquid from -10 °C to +90 °C Ambient temperature between -10 °C and +40 °C (+50 °C )Mano metric suction lift up to 8 mMax. working pressure: – 6 bar
PERFORMANCE RANGE
Flow rate up to 90 l/min (5.4 m3/h)Head up to 100 m
INSTALLATION AND USEImportant to realize Pedrollo PQM60 – 0.37KW. Peripheral pump with radial suction.Designed to transfer clean water free from abrasive particles and liquids that will not damage the pump’s components. Its compact design and efficient hydraulic performance make it ideal for domestic applications.
CONSTRUCTION FEATURES
Pump body Cast iron with ISO 228/1 threaded ports For PQ 61: cast iron with anti-locking treatment with ISO 228/1 threaded ports.Motor bracket Aluminum with brass cover and front scraping anti-locking function (patented).Impeller Brass, radial peripheral vane type.
Motor shaft Stainless steel AISI 431 (EN 10088-3 – 1.4104 for PQ 60, PQ 61, PQ 65).
Mechanical seal (Shaft Ø 12 mm) (Materials Ceramic / Graphite / NBR) (Seal AR-12).Motor shaft Stainless steel AISI 431 (EN 10088-3 – 1.4104).Electric motor PQm: single-phase 230 V – 50 Hz with winding integrated thermal motor protection. Pumps are equipped with high-efficiency motors (IEC 60034-30-1) class IE2 for single-phase models class IE3 for three-phase modelsContinuous running duty S1Insulation: class FProtection rating: IP X4
13d
Mbombela / Nelspruit
1
R 6,463
SavedSave
Please note that shipping and installation is not included.Firstly the feka bvp submersible pump 0.75kW application. Following the powerful submersible pumps for draining and emptying applications. Suitable for pumping dirty water with solid particle size up to 38 mm. Automatic version with float switch for automatic pump start and stop also available.
Construction features of the pump
Hydro resistant techno polymer pump body, wear-free impellers, cover, and suction grid. Corrosion and oxidation resistant materials.
Construction features of the motor
Submersible type continuous duty asynchronous motor. Thermal overheating protection. Wear-resistant motor shaft.Technical Data of the Feka bvp submersible pump 0.75kWOperating range: From 1 to 18 m3/h with head up to 12 meters.Liquid temperature range: From 0 °C to +35 °C.Pumped liquid: Dirty water with maximum solid particle size 38 mm.Max. immersion depth: 7 meters.HP: 1Important to realize to ensure the proper operation of the pump, it is important to comply with the following recommendations:
The pump must never be allowed to run dry.Never leave the pump in operation when the delivery pipe is clogged.The pump must be positioned so that the holes on the suction side cannot be partially or totally clogged by dirt.The pump must only be used when it is immersed in water. If the water runs out, the pump must be stopped immediately by removing the plug from the power supply.Pay careful attention when the pump is operated in manual mode.The pump must be placed in a stable position inside a collection pit or in the lowest part of the place where it is installed.
14d
Mbombela / Nelspruit
1
R 22,510.74
SavedSave
Please note that shipping and installation is not included.WDP with PVDF body:
Exceptional chemical compatibility.Superior thermal stability and resistance to stress cracks.High corrosion resistance.The Seko HYDRAKOS – Water-Driven Pump was created to solve your dosing problems in multiple areas:Agricultural:Firstly it is used to inject fertilizer, pesticides and other additives into irrigation water. It can rely on their equipment to help achieve healthy crops and enjoy improved yields. Poultry farming, pig rearing and rabbit breeding. These versatile systems give breeders peace of mind at all times.Water Treatment and drinking water:
Also for every chemical dosing requirement. As a matter of fact this next-generation systems help operators achieve optimal system performances and chemical consumption. As a result SEKO’s water-driven pumps helping operators to cover a multitude of disinfection requirements, ensure managers can maintain the highest standards of
hygiene.Industry:From vibro-abrasion, de-greasing and legionella control to mineral dosing and wetting agent injection, these versatile systems cover myriad processes. HYDRAKOS pumps offer high-precision chemical injection solutions for tunnel wash, self-serve and gantry wash systems and many other commercial car wash applications.How does it work:Basically water-driven pump technology is based on a hydraulic motor pump activated only by pressure and water flow. Hence installed directly on the water supply line, the pump operates by using the water flow rate as a source of energy.The pressure and flow rate of the water actuates the motor piston which drives a second, product-dosing piston. The product is injected and mixed continuously with the water from the mains supply at the selected dosing rate % (rate of product/water incorporation).The dose of concentrated product is directly proportional to the volume of water passing through the pump, independent of variations in the flow rate and pressure of the mains water supply.Hydraulic Motor:
The motor piston moves under water pressure, with a system of valves allowing the movement to be reversed.Each piston cycle corresponds to a predetermined volume of water which passes through the pump (motor volume). The speed of the motor varies proportionally with water flow.Dosing Assembly:
Courtesy of the dosing body’s adjustable capacity, the motor-driven dosing piston continuously injects a fixed volume of product according to the volume of water passing through. Therefore, the operating principle ensures constant proportional dosing independent of fluctuating flow rate and water pressure.
12d
Mbombela / Nelspruit
1
R 32,907
SavedSave
Please note that shipping and installation is not included.DAB grinder FX submersible pump 1.5kW three phase with a shredder designed for lifting and transferring wastewater in civil and commercial environments. Grinder FX is certified EN 12050-1.
The presence of the shredder makes the pump suitable for systems with small diameter pipes or those requiring high pressures. Shredder in AISI 630 stainless steel. Ideal pump for replacements thanks to its reduced dimensions and to both flanged and threaded delivery ports.Technical Data of the DAB grinder FX submersible pump 1.5kW three phaseFlow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
Construction features of the pump: Pump body and impeller in cast iron, shredder in AISI 630. Motor shaft in AISI 304 stainless steel. Double mechanical seal in SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid, independent of the direction of rotation. Delivery port both flanged and threaded.Construction features of the motor: Single-phase asynchronous motor (MA / MNA versions) and three-phase version motor (TNA versions). The rotor is mounted on lubricated bearings. Continuous operation in S1 with the motor completely immersed. Dry running for a maximum time of 10 minutes. Over-temperature sensors in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase versions with starter and capacitor in a separate panel, MA versions
with float for automatic operation. In the three-phase motors the over-temperature sensor connection is responsibility of the user.
15d
Mbombela / NelspruitSave this search and get notified
when new items are posted!