Please note that our Terms & Conditions and Privacy Notice are applicable.
On Promotion in Home & Garden
Pay & Ship
Buy with confidence. Secure payment options & nationwide delivery. Learn more
Filter & refine
Clear All
Suggested
Top ads in Home & Garden
R 1,800
565-585 Watt Mono-Facial Module, N-Type. All bar coded. Specifications data available on request.No. of cells: 144(6x24)Dimensions: 2278mm x 1134mmx 35mmWeight: 28kgFront Glass: 3.2mm, Anti-refection coating. High Transmission, Low Iron. Tempered GlassFrame: Anodized Aluminium AlloyJunction Box: IP68 RatedOutput Cables: TUV 1x4.00mm, (+) 400mm, (-) 200mmContact: Babs 0832552600Website: www.stellep.co.zaEmail: pelletsforplastic@gmail.com
Umhlanga
Results for power bar in "power bar" in Home & Garden Supplies in South Africa in South Africa
4
R 1,500
NEGOTIABLE
SavedSave
Home built aircompressor.About 18 liters capacity.6 bar working pressure.Safety valve,pressure gauge and regulator.Good working condition.
3d
Kraaifontein
4
R 3,000
NEGOTIABLE
SavedSave
Karcher (K4) 520M K520M Pressure Washer. A compact device that packed a real punch, 450 l/h flowrate powered by a 2000 watt induction motor giving a 130 bar pressure.Located in Observatory near Linksfield
4d
Bedfordview
1
R 12,285.11
SavedSave
Please note that shipping and installation is not included.Dosing pump Seko AKS803 is an analogic dosing pump with constant flow rate, which is manually adjustable by a knob mounted on the front panel, in addition there is the level control input than the Tekna AKS.The flow rate has two frequency ranges:0÷20 % of max flow rate0÷100% of max flow rateWith only 5 sizes that pump can cover a wide range of performances, having a flow rate range from 0.4 to 110 l/h and a back pressure from 0.1 to 20 bar. The power supply is 100÷240 Vac – 50/60 Hz therefore the same pump can operate with different supply voltage, moreover the model AKL603 have the possibility for 24÷48 Vac power supply.The standard pump head is in PVDF, therefore high chemical compatibility with several liquids end but is available in PVC as well, on request.Dosing pump Seko AKS803 are equipped with a manually priming pump for the start up.
The pump is furnished with a complete standard installation kit, which includes: PVDF foot filter and injection valve, PVC suction tube, PE delivery tube. Moreover is available an installation kit in PVDF-T, on request. The ambient temperature at the site of pump installation cannot exceed 40°C, and the relative humidity cannot be above 90%; the pump cannot be installed in a place exposed to sun or bad weather.Hydraulic Characteristics:Power Supply:100÷240VacFlow rates: 20.0 l/ph – 5 bar pressure32.0 l/ph – 4 bar pressure62.0 l/ph – 2 bar pressure110.0 l/ph – 0 bar pressureMax Frequence -Strokes per min:120Stroke Capacity (cc/str.): 20.0 l/ph – 5 bar pressure – 1.1132.0 l/ph – 4 bar pressure – 1.7862.0 l/ph – 2 bar pressure – 3.44110.0 l/ph – 0 bar pressure – 6.11
Installation Kit Available:PVDF-TPDVFSeals Available:FKM-BEPDMPTFE
9d
Mbombela / Nelspruit
1
R 9,760.54
SavedSave
Please note that shipping and installation is not included.Dosing pump Seko AKS800 is an analogic dosing pump with constant flow rate, which is manually adjustable by a knob mounted on the front panel, in addition there is the level control input than the Tekna AKS.The flow rate has two frequency ranges:
0÷20 % of max flow rate0÷100% of max flow rateWith only 5 sizes that pump can cover a wide range of performances, having a flow rate range from 0.4 to 110 l/h and a back pressure from 0.1 to 20 bar. The power supply is 100÷240 Vac – 50/60 Hz therefore the same pump can operate with different supply voltage, moreover the model AKL603 have the possibility for 24÷48 Vac power supply.The standard pump head is in PVDF, therefore high chemical compatibility with several liquids end but is available in PVC as well, on request. Dosing pump Seko AKS800 are equipped with a manually priming pump for the start up. The pump is furnished with a complete standard installation kit, which includes: PVDF foot filter and injection valve, PVC suction tube, PE delivery tube. Moreover is available an installation kit in PVDF-T, on request. The ambient temperature at the site of pump installation cannot exceed 40°C, and the relative humidity cannot be above 90%; the pump cannot be installed in a place exposed to sun or bad weather.
Hydraulic Characteristics:Power Supply:100÷240Vac
Flow rates: 7.0 l/ph – 16 bar pressure10.0 l/ph – 10 bar pressure15.0 l/ph – 5 bar pressure18.0 l/ph – 1 bar pressure
Max Frequence -Strokes per min:120Stroke Capacity (cc/str.): 7.0 l/ph – 16 bar pressure – 0.3810.0 l/ph – 10 bar pressure – 0.5515.0 l/ph – 5 bar pressure – 0.8318.0 l/ph – 1 bar pressure – 1.00
Installation Kit Available:PVDF-TPDVF
Seals Available:FKM-BEPDMPTFE
9d
Mbombela / Nelspruit
1
R 9,059.33
SavedSave
Please note that shipping and installation is not included.Dosing pump Seko AKS600 is an analogic dosing pump with constant flow rate, which is manually adjustable by a knob mounted on the front panel, in addition there is the level control input than the Tekna AKS.The flow rate has two frequency ranges:0÷20 % of max flow rate0÷100% of max flow rateWith only 5 sizes that pump can cover a wide range of performances, having a flow rate range from 0.4 to 110 l/h and a back pressure from 0.1 to 20 bar. The power supply is 100÷240 Vac – 50/60 Hz therefore the same pump can operate with different supply voltage, moreover the model AKL603 have the possibility for 24÷48 Vac power supply.
The standard pump head is in PVDF, therefore high chemical compatibility with several liquids end but is available in PVC as well, on request.
Dosing pump Seko AKS600 are equipped with a manually priming pump for the start up.
The pump is furnished with a complete standard installation kit, which includes: PVDF foot filter and injection valve, PVC suction tube, PE delivery tube. Moreover is available an installation kit in PVDF-T, on request. The ambient temperature at the site of pump installation cannot exceed 40°C, and the relative humidity cannot be above 90%; the pump cannot be installed in a place exposed to sun or bad weatherHydraulic Characteristics:Power Supply:100÷240VacFlow rates: 2.5 l/ph – 20 bar pressure3.0 l/ph – 18 bar pressure4.2 l/ph – 14 bar pressure7.0 l/ph – 8 bar pressure
Max Frequence -Strokes per min:120
Stroke Capacity (cc/str.): 2.5 l/ph – 20 bar pressure – 0.353.0 l/ph – 18 bar pressure – 0.424.2 l/ph – 14 bar pressure – 0.587.0 l/ph – 8 bar pressure – 0.97
Installation Kit Available:PVDF-TPDVFSeals Available:FKM-BEPDMPTFE
9d
Mbombela / Nelspruit
1
R 7,053.63
SavedSave
Please note that shipping and installation is not included.Dosing pump Seko AKS603 is an analogic dosing pump with constant flow rate, which is manually adjustable by a knob mounted on the front panel, in addition there is the level control input than the Tekna AKS.The flow rate has two frequency ranges:0÷20 % of max flow rate0÷100% of max flow rateWith only 5 sizes that pump can cover a wide range of performances, having a flow rate range from 0.4 to 110 l/h and a back pressure from 0.1 to 20 bar. The power supply is 100÷240 Vac – 50/60 Hz therefore the same
pump can operate with different supply voltage, moreover the model AKL603 have the possibility for 24÷48 Vac power supply.The standard pump head is in PVDF, therefore high chemical compatibility with several liquids end but is available in PVC as well, on request. Dosing pump Seko AKS603 are equipped with a manually priming pump for the start up.
The pump is furnished with a complete standard installation kit, which includes: PVDF foot filter and injection valve, PVC suction tube, PE delivery tube. Moreover is available an installation kit in PVDF-T, on request. The ambient temperature at the site of pump installation cannot exceed 40°C, and the relative humidity cannot be above 90%; the pump cannot be installed in a place exposed to sun or bad weather.
Hydraulic Characteristics:Power Supply:100÷240Vac
Flow rates: 4.0 l/ph – 12 bar pressure5.0 l/ph – 10 bar pressure6.0 l/ph – 8 bar pressure8.0 l/ph – 2 bar pressureMax Frequence -Strokes per min:160Stroke Capacity (cc/str.): 4.0 l/ph – 12 bar pressure – 0.425.0 l/ph – 10 bar pressure – 0.526.0 l/ph – 8 bar pressure – 0.638.0 l/ph – 2 bar pressure – 0.83
Installation Kit Available:PVDF-TPDVFSeals Available:FKM-BEPDMPTFE
9d
Mbombela / Nelspruit
1
R 11,478.39
SavedSave
Please note that shipping and installation is not included.Dosing pump Seko APG600 Series is an analogic dosing pump with:
constant flow rate manually adjustableproportional flow rate according to an external analogic (4-20 mA) or digital signal (water meter)Six positions adjustable switch:
3 in division mode (1, 4, 10=n)1 in multiplication mode (n=1)1 for proportional mode 4-20 mA signal1 for constant functionality
Dosing pump Seko APG600 Hydraulic Characteristics: Power Supply:100÷240VacFlow rates: 2.5 l/ph – 20 bar pressure3.0 l/ph – 18 bar pressure4.2 l/ph – 14 bar pressure7.0 l/ph – 8 bar pressureMax Frequency – Strokes per min:120Stroke Capacity (cc/str.): 2.5 l/ph – 20 bar pressure – 0.353.0 l/ph – 18 bar pressure – 0.424.2 l/ph – 14 bar pressure – 0.587.0 l/ph – 8 bar pressure – 0.97Installation Kit Available:PVDF-TPDVFSeals Available:FKM-BEPDMPTFE
9d
Mbombela / Nelspruit
1
R 14,575.76
SavedSave
Please note that shipping and installation is not included.Dosing pump Seko APG803 Series is an analogic dosing pump with:Constant flow rate manually adjustableProportional flow rate according to an external analogic (4-20 mA) or digital signal (water meter)Six positions adjustable switch:
3 in division mode (1, 4, 10=n)1 in multiplication mode (n=1)1 for proportional mode 4-20 mA signal1 for constant functionality
Dosing pump Seko APG803 Hydraulic Characteristics: Power Supply:100÷240VacFlow rates: 20.0 l/ph – 5 bar pressure32.0 l/ph – 4 bar pressure62.0 l/ph – 2 bar pressure110.00 l/ph – 0 bar pressureMax Frequency -Strokes per min:120Stroke Capacity (cc/str.): 20.0 l/ph – 5 bar pressure – 1.1132.0 l/ph – 4 bar pressure – 1.7862.0 l/ph – 2 bar pressure – 3.44110.0 l/ph – 0 bar pressure – 6.11Installation Kit Available:PVDF-TPDVFSeals Available:FKM-BEPDMPTFE
9d
Mbombela / Nelspruit
1
R 11,894.85
SavedSave
Please note that shipping and installation is not included.Dosing pump Seko APG800 Series is an analogic dosing pump with:constant flow rate manually adjustableproportional flow rate according to an external analogic (4-20 mA) or digital signal (water meter)Six positions adjustable switch:
3 in division mode (1, 4, 10=n)1 in multiplication mode (n=1)1 for proportional mode 4-20 mA signal1 for constant functionalityDosing pump Seko APG800 Hydraulic Characteristics:Power Supply:100÷240Vac
Flow rates: 7.0 l/ph – 16 bar pressure10.0 l/ph – 10 bar pressure15.0 l/ph – 5 bar pressure18.0 l/ph – 1 bar pressureMax Frequency -Strokes per min:120Stroke Capacity (cc/str.): 7.0 l/ph – 16 bar pressure – 0.3910.0 l/ph – 10 bar pressure – 0.5615.0 l/ph – 5 bar pressure – 0.8318 l/ph – 1 bar pressure – 1.0Installation Kit Available:PVDF-TPDVFSeals Available:FKM-BEPDMPTFE
9d
Mbombela / Nelspruit
1
R 9,526.30
SavedSave
Please note that shipping and installation is not included.Dosing pump Seko APG603 Series is an analogic dosing pump with:constant flow rate manually adjustableproportional flow rate according to an external analogic (4-20 mA) or digital signal (water meter)Six positions adjustable switch:
3 in division mode (1, 4, 10=n)1 in multiplication mode (n=1)1 for proportional mode 4-20 mA signal1 for constant functionalityDosing pump Seko APG603 Hydraulic Characteristics:Power Supply:100÷240VacFlow rates: 4.0 l/ph – 12 bar pressure5.0 l/ph – 10 bar pressure6.0 l/ph – 8 bar pressure8.0 l/ph – 2 bar pressure
Max Frequence -Strokes per min:160Stroke Capacity (cc/str.): 4.0 l/ph – 12 bar pressure – 0.425.0 l/ph – 10 bar pressure – 0.526.0 l/ph – 8 bar pressure – 0.638.0 l/ph – 2 bar pressure – 0.83
Installation Kit Available:PVDF-TPDVF
Seals Available:FKM-BEPDMPTFE
9d
Mbombela / Nelspruit
1
R 13,300.37
SavedSave
Please note that shipping and installation is not included. Dosing pump Seko TPG600 is a digital solenoid-driven dosing pump with constant flow rate that can be adjusted manually or with proportional flow rate according to an external analogue (4÷20 mA) or digital pulse signal such as a water meter.The pump is also equipped with a manual priming pump for the start up and comes complete with a standard installation kit, which includes a PVDF foot filter and injection valve, PVC suction tube and PE delivery tube. A PVDF-T installation kit is available on request.
Dosing pump Seko TPG600 is also available with an AISI316L pump head which provides exceptionally high chemical compatibility with several liquid ends.Hydraulic Characteristics:Power Supply:100÷240VacFlow rates: 2.5 l/ph – 20 bar pressure3.0 l/ph – 18 bar pressure4.2 l/ph – 14 bar pressure8.0 l/ph – 7.0 bar pressureMax Frequence -Strokes per min:120Stroke Capacity (cc/str.):2.5 l/ph – 20 bar pressure – 0.353.0 l/ph – 18 bar pressure – 0.424.2 l/ph – 14 bar pressure – 0.588.0 l/ph – 7.0 bar pressure – 0.97Installation Kit Available:PVDF-TPDVFSeals Available:FKM-BEPDMPTFE
9d
Mbombela / Nelspruit
1
R 13,716.82
SavedSave
Please note that shipping and installation is not included.Dosing pump Seko TPG800 is a digital solenoid-driven dosing pump with constant flow rate that can be adjusted manually or with proportional flow rate according to an external analogue (4÷20 mA) or digital pulse signal such as a water meter.The pump is also equipped with a manual priming pump for the start up and comes complete with a standard installation kit, which includes a PVDF foot filter and injection valve, PVC suction tube and PE delivery tube. A PVDF-T installation kit is available on request.
Dosing pump Seko TPG800 is also available with an AISI316L pump head which provides exceptionally high chemical compatibility with several liquid ends.Hydraulic Characteristics:Power Supply:100÷240 VacFlow rates: 7.0 l/ph – 16 bar pressure10.0 l/ph – 10 bar pressure15.0 l/ph – 5 bar pressure18.0 l/ph – 1.0 bar pressureMax Frequence -Strokes per min:300Stroke Capacity (cc/str.): 7.0 l/ph – 16 bar pressure – 0.3910.0 l/ph – 10 bar pressure – 0.5615.0 l/ph – 5 bar pressure – 0.8318.0 l/ph – 1.0 bar pressure – 1.00Installation Kit Available:PVDF-TPDVFSeals Available:FKM-BEPDMPTFE
9d
Mbombela / Nelspruit
1
R 11,686.63
SavedSave
Please note that shipping and installation is not included.
Dosing pump Seko TPG603 is a digital solenoid-driven dosing pump with constant flow rate that can be adjusted manually or with proportional flow rate according to an external analogue (4÷20 mA) or digital pulse signal such as a water meter.
The pump is also equipped with a manual priming pump for the start up and comes complete with a standard installation kit, which includes a PVDF foot filter and injection valve, PVC suction tube and PE delivery tube. As a matter of fact PVDF-T installation kit is available on request.
Dosing pump Seko TPG603 is also available with an AISI316L pump head
which provides exceptionally high chemical compatibility with several liquid ends.
Hydraulic Characteristics:Power Supply:100÷240 VacFlow rates: 4.0 l/ph – 12 bar pressure5.0 l/ph – 10 bar pressure6.0 l/ph – 8 bar pressure8.0 l/ph – 2 bar pressureMax Frequence -Strokes per min:160Stroke Capacity (cc/str.): 4.0 l/ph – 12 bar pressure – 0.425.0 l/ph – 10 bar pressure – 0.526.0 l/ph – 8 bar pressure – 0.638.0 l/ph – 2 bar pressure – 0.83
Installation Kit Available:PVDF-TPDVFSeals Available:FKM-BEPDMPTFE
9d
Mbombela / Nelspruit
1
R 16,371.69
SavedSave
Please note that shipping and installation is not included.Dosing pump Seko TPG803 is a digital solenoid-driven dosing pump with constant flow rate that can be adjusted manually or with proportional flow rate according to an external analogue (4÷20 mA) or digital pulse signal such as a water meter.The pump is also equipped with a manual priming pump for the start up and comes complete with a standard installation kit, which includes a PVDF foot filter and injection valve, PVC suction tube and PE delivery tube. A PVDF-T installation kit is available on request.Dosing pump Seko TPG803 is also available with an AISI316L pump head which provides exceptionally high chemical compatibility with several liquid ends.Hydraulic Characteristics:Power Supply:100÷240 VacFlow rates: 20.0 l/ph – 5 bar pressure32.0 l/ph – 4 bar pressure62.0 l/ph – 2 bar pressure110.0 l/ph – 0 bar pressureMax Frequency -Strokes per min:300Stroke Capacity (cc/str.): 20.0 l/ph – 5 bar pressure – 1.1132.0 l/ph – 4 bar pressure – 1.7862.0 l/ph – 2 bar pressure – 3.44110.0 l/ph – 0 bar pressure – 6.11Installation Kit Available:PVDF-TPDVFSeals Available:FKM-BEPDMPTFE
9d
Mbombela / Nelspruit
1
R 12,935.98
SavedSave
Please note that shipping and installation is not included.Firstly this Dosing pump Seko Tekna Evo AKS812 pvdf head FKM-B seals. Markedly it has been designed for use in conjunction with solar panels, batteries for cars. For instance all those situations where you can’t
use a power supply network. One size that pump can cover a range of performances. Having a flow rate range from 3 to 5 l/h and a back
pressure from 5 to 10 bar. Also dosing pump Seko Tekna Evo AKS812 pvdf head FKM-B seals 12vdc an
analogic dosing pump with constant flow rate, which is manually adjustable by a knob mounted on the front panel. The flow rate has two frequency ranges:
0÷20 % of max flow rate0÷100% of max flow rateThe standard pump head is in PVDF, therefore high chemical compatibility with several liquids end but is available in PVC as well, on request.All in all the Tekna series are equipped with a manually priming pump for the start up. The pump is furnished with a complete standard installation kit, which includes: PVDF foot filter and injection valve, PVC suction tube, PE delivery tube.Moreover is available an installation kit in PVDF-T, on request. The ambient temperature at the site of pump installation cannot exceed 40°C, and the relative humidity cannot be above 90%; the pump cannot be installed in a place exposed to sun or bad weather.Hydraulic Characteristics:Power Supply:12 VDCFlow rates: 5.0 l/ph – 5 bar pressure4.0 l/ph – 8 bar pressure3.0 l/ph – 10 bar pressureMax Frequence -Strokes per min:300Stroke Capacity (cc/str.): 5.0 l/ph – 5 bar pressure – 0.284.0 l/ph – 8 bar pressure – 0.223.0 l/ph – 10 bar pressure – 0.17Installation Kit Available:PVDF-TPDVFSeals Available:FKM-BEPDMPTFEFFKM
9d
Mbombela / Nelspruit
1
R 4,000
NEGOTIABLE
SavedSave
Oil free air compressor able to supply one or several applications.Ultra quietLow level vibrationsIntegration flexibilityIntegrated filtrationSystem type: Base unitMaximum pressure: 8 barTank size: 25 LCompressed air networksDental officeIndustrial applicationsLaboratory
9d
Paarl
1
R 20,041.66
SavedSave
Please note that shipping and installation is not included.Firstly this Seko Dosing Pump Tekna 12 VDC Solenoid Pump. Markedly it has been designed for use in conjunction with solar panels, batteries for cars. For instance all those situations where you can’t use a power supply network. One size that pump can cover a range of performances. Having a flow rate range from 3 to 5 l/h and a back pressure from 5 to 10 bar.Dosing pump Seko Tekna Evo TPT812 pvdf kit + head 12vdc digital pump with constant flow rate manually adjustable, with proportional flow rate according to an external analog (4-20 mA) or digital signal (water meter); Batch mode; Timer function; ppm proportional dosing; Statistics; Password; Input ON-OFF (remote control), pH/Redox control meter on board, PT100 or PT1000 (selectable) probe input (thermal compensation).The standard pump head is in PVDF, therefore high chemical compatibility with several liquids end but is available in PVC as well, on request.All in all the Tekna series are equipped with a manually priming pump for the start up. The pump is furnished with a complete standard installation kit, which includes: PVDF foot filter and injection valve, PVC suction tube, PE delivery tube.Moreover is available an installation kit in PVDF-T, on request. The ambient temperature at the site of pump installation cannot exceed 40°C, and the relative humidity cannot be above 90%; the pump cannot be installed in a place exposed to sun or bad weather.Hydraulic Characteristics:Power Supply:12 VDCFlow rates: 5.0 l/ph – 5 bar pressure4.0 l/ph – 8 bar pressure3.0 l/ph – 10 bar pressureMax Frequence -Strokes per min:300Stroke Capacity (cc/str.): 5.0 l/ph – 5 bar pressure – 0.284.0 l/ph – 8 bar pressure – 0.223.0 l/ph – 10 bar pressure – 0.17Installation Kit Available:PVDF-TPDVFSeals Available:FKM-BEPDMPTFEFFKM
9d
Mbombela / Nelspruit
1
R 1,115
SavedSave
Please note that shipping and installation is not included.Firstly DAB pump controller 1.1kW device designed to control the
pump‘s starting and stopping based on demand. It stops the pump when
there is no water and protects it from dry running. Also it can be
mounted on surface and submersible pumps alike. The compact device is
reliable and designed, above all, for residential applications.
DAB pump controller 1.1kW can be mounted on the actual pump or
between the pump and the first point of use. To put the device into
operation, simply perform the wiring and supply power. From now on,
Quick Press will start and stop the pump based on water.demand (opening and closing). If there is a power outage, the unit restarts automatically when power is resumed. The control panel is designed to indicate run status and report any operating issues.
Technical Data
Supply voltage: 1×230 Vac (+/- 10%) 50/60 HzMax. current: 12 AOutput: 1,1 – 2.2 kWProtection rating: IP65Max. working pressure: 10 barMinimum flow rate: ≈ 1 l/minMale connection: 1’’ BSPRestart pressure setting: 1,5 Bar (non-adjustable)Max. working temperature: 60°CCertifications for drinking water use: ACS e AS/NZ 4020
7d
Mbombela / Nelspruit
1
R 1,983
SavedSave
Please note that shipping and installation is not included.Firstly DAB pump controller 2.2kW device designed to control the
pump‘s starting and stopping based on demand. It stops the pump when
there is no water and protects it from dry running. Also it can be
mounted on surface and submersible pumps alike. The compact device is
reliable and designed, above all, for residential applications.
DAB pump controller 2.2kW can be mounted on the actual pump or
between the pump and the first point of use. To put the device into
operation, simply perform the wiring and supply power. From now on,
Quick Press will start and stop the pump based on water.demand (opening and closing). If there is a power outage, the unit restarts automatically when power is resumed. The control panel is designed to indicate run status and report any operating issues.
Technical Data
Supply voltage: 1×230 Vac (+/- 10%) 50/60 HzMax. current: 12 AOutput: 1,1 – 2.2 kWProtection rating: IP65Max. working pressure: 10 barMinimum flow rate: ≈ 1 l/minMale connection: 1’’ BSPRestart pressure setting: 1,5 Bar (non-adjustable)Max. working temperature: 60°CCertifications for drinking water use: ACS e AS/NZ 4020
7d
Mbombela / Nelspruit
1
R 5,590.16
SavedSave
Please note that shipping and installation is not included.Seko Kompact AMS200 dosing pump series is a simple solenoid dosing pump, operating with a micro-processor to manage the dosing. Its external enclosure has an IP55, which guarantees a protection versus splashing water and aggressive environments.
The Dosing pump Seko AMS200 head has a manual priming valve, the flow rate is manually or automatically (by signal input) adjustable from 0 (pump stop) to 100% of the max flow rate moreover it is equipped with the low-level alarm to stop or not the pump and includes the installation kit as well.
Finally compact pump can be fixed on wall by fixing bracket provide with the pump or top of drums by the optional foot fixing bracket. Then the ambient temperature at the site of pump installation cannot exceed 40°C, and the relative humidity cannot be above 90%; the pump cannot be installed in a place exposed to sun or bad weather.Hydraulic Characteristics:Power Supply:240VAC
Flow rates:3.0 l/ph – 10 bar pressure5.0 l/ph – 8 bar pressureMax Frequence -Strokes per min:160Stroke Capacity (cc/str.): 3.0 l/ph – 10 bar pressure – 0.315.0 l/ph – 8 bar pressure – 0.52
Installation Kit Available:PVDF-TPDVF
Seals Available:FKM-BEPDM
9d
Mbombela / NelspruitSave this search and get notified
when new items are posted!