Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Home & Garden
Some search tips we've found useful:
- Check the spelling of your search terms
- Use fewer or more general search terms
- Try browsing a category related to your search terms
Ads in other locations
1
R 4,748.49
SavedSave
Centrifugal Pump Motor
◆ 2 pole induction motor.
◆Single phase 220V, 50/60Hz; Three phase 380V, 50/60Hz.
◆Insulation: Class B/Class F.
◆Protection:IP44.
◆With capacitor and thermal overload protector.
Centrifugal Pump Material
◆ Pump body: Cast Iron.
◆ Motor support: Aluminum.
◆ Impeller: Brass.
◆ Motor shaft: Stainless Steel or CS45#.
◆ Mechanical seal: Ceramic-Graphite.
◆ 100% copper winding.
Centrifugal Pump Operating Conditions
◆ Suction lift up to 7m.
◆ Liquid temperature up to +40℃.
◆ Ambient temperature up to +40℃.
◆ Max. working pressure: 6bar.
13h
1
R 3,021.77
SavedSave
Jet Pumps For Deep Well Motor
◆ 2 pole induction motor.
◆ Single phase 220V, 50/60Hz; Three phase 380V, 50/60 Hz.
◆ Insulation: Class B/Class F.
◆ Protection: IP44.
◆ With capacitor and thermal overload protector.
Jet Pumps For Deep Well Material
◆ Pump body: Cast Iron.
◆ Motor support: Aluminum.
◆ Impeller: Brass / PPO.
◆ Motor shaft: Stainless Steel or CS45#.
◆ Ejector: Cast Iron.
◆ Mechanical seal: Ceramic + Graphite.
◆ 100% copper winding.
Jet Pumps For Deep Well Operating Conditions
◆ Liquid temperature up to +60℃.
◆Ambient temperature up to +40℃.
◆Max. working pressure: 8bar.
13h
1
R 2,898.43
SavedSave
Centrifugal Pump Motor
◆ 2 pole induction motor.
◆Single phase 220V, 50/60Hz; Three phase 380V, 50/60Hz.
◆Insulation: Class B/Class F.
◆Protection:IP44.
◆With capacitor and thermal overload protector.
Centrifugal Pump Material
◆ Pump body: Cast Iron.
◆ Motor support: Aluminum.
◆ Impeller: Brass.
◆ Motor shaft: Stainless Steel or CS45#.
◆ Mechanical seal: Ceramic-Graphite.
◆ 100% copper winding.
Centrifugal Pump Operating Conditions
◆ Suction lift up to 7m.
◆ Liquid temperature up to +40℃.
◆ Ambient temperature up to +40℃.
◆ Max. working pressure: 6bar.
13h
1
R 2,033.07
SavedSave
Seakoo QB60L Self-Priming Peripheral Pump + Controller
· 2 pole induction motor.
· Single phase 220V, 50/60Hz.
· Insulation: Class B/Class F.
· Protection: IP44.
· With capacitor and thermal overload protector.
QB-Self Priming Pressure Pump Material
· Pump body: Cast Iron.
· Motor support: Aluminum.
· Impeller: Brass.
· Motor shaft: Stainless Steel or CS45#.
· Mechanical seal: Ceramic-Graphite.
· 100% copper winding.
Operating Conditions
· Suction lift up to 8m.
· Liquid temperature up to +40℃.
· Ambient temperature up to +40℃.
· Max. working pressure: 6 bar.
13h
1
R 1,344.38
SavedSave
This Seakoo Controller 16A EPC-12 230V can operate most 230v pumps up-to 2.2kw/16A with the many added futures:
Can set on and off pressureDisplay real time pressure while operationalPressure protection Frequent stop/start protectionDry pump/ run protectionAuto restart after water was emptyLow voltage protection
It is recommended that a non-return / check valve should also be installed on the inlet side of the pump (not supplied).
In/outlet = 25mm male thread
Max pressure: 10bar
Max difference on/off pressure: 6.5bar
13h
1
R 1,184.04
NEGOTIABLE
SavedSave
QB-Self Priming Pressure Pump Motor
· 2 pole induction motor.
· Single phase 220V, 50/60Hz.
· Insulation: Class B/Class F.
· Protection: IP44.
· With capacitor and thermal overload protector.
QB-Self Priming Pressure Pump Material
· Pump body: Cast Iron.
· Motor support: Aluminum.
· Impeller: Brass.
· Motor shaft: Stainless Steel or CS45#.
· Mechanical seal: Ceramic-Graphite.
· 100% copper winding.
Operating Conditions
· Suction lift up to 8m.
· Liquid temperature up to +40℃.
· Ambient temperature up to +40℃.
· Max. working pressure: 6 bar.
13h
1
R 431.77
SavedSave
Seakoo Float Switch 5M
2 Way float switch for automatic filling or emptying of water tanks
with 5m cable and counter weight Instruction manual included.
Max 250V.
Max16A (8A) – For up to 1.1kw pumps.
Max operating temp: 55 Degrees Celsius.
Protection grade: IP68.
What’s in the box:
1 x 5M float switch + 1 x Counter weight + 1 x Instructions.
13h
1
R 1,008.55
SavedSave
The Aquasystem Vertical Pressure Tanks
with replaceable membrane is an element used in hydraulic applications
for sanitary water circuits, such as pressure groups in combination with
pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
precharged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 8 bar
Standard precharge pressure – 1.5 bar
Connection – 1″
13h
1
R 3,844.45
SavedSave
The Aquasystem Vertical Pressure Tanks
With Replaceable Membrane 5L with replaceable membrane is an element
used in hydraulic applications for sanitary water circuits, such as
pressure groups in combination with pumps or devices such as anti-water
hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
precharged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard precharge pressure – 1.5 bar
Connection – 1″
13h
1
R 4,769.05
SavedSave
The Aquasystem Vertical Pressure Tanks
with replaceable membrane is an element used in hydraulic applications
for sanitary water circuits, such as pressure groups in combination with
pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
precharged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard precharge pressure – 1.5 bar
Connection – 1″
14h
1
R 7,243.85
SavedSave
The Aquasystem Vertical Pressure Tanks
with replaceable membrane is an element used in hydraulic applications
for sanitary water circuits, such as pressure groups in combination with
pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
precharged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard precharge pressure – 1.5 bar
Connection – 1″
14h
1
R 12,940.95
SavedSave
The Aquasystem Vertical Pressure Tanks
with replaceable membrane is an element used in hydraulic applications
for sanitary water circuits, such as pressure groups in combination with
pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
precharged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard precharge pressure – 2 bar
Connection – 1 1/2″
14h
1
R 16,504.80
SavedSave
The Aquasystem Vertical Pressure Tanks
with replaceable membrane is an element used in hydraulic applications
for sanitary water circuits, such as pressure groups in combination with
pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
precharged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard precharge pressure – 2 bar
Connection – 1 1/2″
14h
1
R 25,022.85
SavedSave
The Aquasystem Vertical Pressure Tanks
with replaceable membrane is an element used in hydraulic applications
for sanitary water circuits, such as pressure groups in combination with
pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
precharged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard precharge pressure – 2 bar
Connection – 1 1/2″
14h
1
R 4,023.85
SavedSave
The Aquasystem Horizontal Pressure Tank
with replaceable membrane is an element used in hydraulic applications
for sanitary water circuits, such as pressure groups in combination with
pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
precharged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue Epoxy Coated
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard precharge pressure – 1.5 bar
Connection – 1″
14h
1
R 5,071.50
SavedSave
The Aquasystem Horizontal Pressure Tank
with replaceable membrane is an element used in hydraulic applications
for sanitary water circuits, such as pressure groups in combination with
pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
precharged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard precharge pressure – 1.5 bar
Connection – 1″
14h
1
R 7,557.80
SavedSave
The pressure tank with replaceable membrane is an element used in
hydraulic applications for sanitary water circuits, such as pressure
groups in combination with pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
precharged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue Epoxy Coated
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard precharge pressure – 1.5 bar
Connection – 1″
14h
1
R 13,257.20
SavedSave
The Aquasystem Horizontal Pressure Tank with replaceable membrane is
an element used in hydraulic applications for sanitary water circuits,
such as pressure groups in combination with pumps or devices such as
anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
precharged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue Epoxy Coated
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard precharge pressure – 2 bar
Connection – 1 1/4″
14h
1
R 9,381.70
SavedSave
The Aquasystem Vertical Pressure Tanks
with replaceable membrane is an element used in hydraulic applications
for sanitary water circuits, such as pressure groups in combination with
pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
precharged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Galvanized Steel
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard precharge pressure – 2 bar
Connection – 1″
14h
1
R 17,590.40
SavedSave
The Aquasystem Vertical Pressure Tanks
with replaceable membrane is an element used in hydraulic applications
for sanitary water circuits, such as pressure groups in combination with
pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
precharged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Galvanized Steel
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard precharge pressure – 2 bar
Connection – 1 1/4″
14h
Successfully Added to List
View and manage your saved ads in your account.