Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Home & Garden
Some search tips we've found useful:
- Check the spelling of your search terms
- Use fewer or more general search terms
- Try browsing a category related to your search terms
Ads in other locations
1
R 7,107
SavedSave
The Seko AKS603 reliable dosing pump with a manual adjusting dial for
accurately dosing a constant flow rate into a tank or pressurised
pipeline. The pump is switched on/off via a relay or flow switch to
start/stop dosing at the rate set on the dial. There are two frequency
settings: 0-20% and 0-100%. Suitable for a wide range of solids free
liquid chemical or fertiliser dosing application.
Delivers 4l/hr at 12 bar line pressure up to a maximum flow rate of 8l/hr at 2 bar.
The complete standard installation kit is composed of: foot filter
and injection valve, PVC suction tube, PE delivery tube and wall fixing
bracket.
Specifications:
-Inlet/outlet: 4/6mm inside/outside diameter
-Power: 220V, 12.5W
-Max stoke frequency: 160 /min
-Casing made of PP reinforced with glass fibre
-IP 65 rated
-PTFE diaphragm
-Level control input
-Priming valve
-Installation kit and pump head material: PVDF with ceramic balls
-Viton (FPM) seals as standard. Please note that EPDM seals are required for chemicals such as caustic lye.
16h
1
R 13,685
SavedSave
Seko TPG800
Specification
Flow rate: 0.4 – 110 l/hMaximum backpressure: up to 20 barPower supply: 100 – 240V 50/60 HzStroke rate: 120 – 300 strokes/minutePump head: PVDFDiaphragm: PTFE
16h
1
R 1,483.04
SavedSave
Basic Features Included:
1 x Klorman In-Line Feeder Unit – EXCLUDING Chlorine Cartridge
Inlet/Outlet – 50mm (Glue) Ports
1 x Set 50mm Glue to 2″ Female Thread Connector
1 x Set 50mm Glue to 3/4″ Female Thread Reducer Connector
Maximum Operating Pressure: 6 Bar / 90 PSI
17h
1
R 2,033.07
SavedSave
Seakoo QB60L Self-Priming Peripheral Pump + Controller
· 2 pole induction motor.
· Single phase 220V, 50/60Hz.
· Insulation: Class B/Class F.
· Protection: IP44.
· With capacitor and thermal overload protector.
QB-Self Priming Pressure Pump Material
· Pump body: Cast Iron.
· Motor support: Aluminum.
· Impeller: Brass.
· Motor shaft: Stainless Steel or CS45#.
· Mechanical seal: Ceramic-Graphite.
· 100% copper winding.
Operating Conditions
· Suction lift up to 8m.
· Liquid temperature up to +40℃.
· Ambient temperature up to +40℃.
· Max. working pressure: 6 bar.
2d
1
R 1,184.04
NEGOTIABLE
SavedSave
QB-Self Priming Pressure Pump Motor
· 2 pole induction motor.
· Single phase 220V, 50/60Hz.
· Insulation: Class B/Class F.
· Protection: IP44.
· With capacitor and thermal overload protector.
QB-Self Priming Pressure Pump Material
· Pump body: Cast Iron.
· Motor support: Aluminum.
· Impeller: Brass.
· Motor shaft: Stainless Steel or CS45#.
· Mechanical seal: Ceramic-Graphite.
· 100% copper winding.
Operating Conditions
· Suction lift up to 8m.
· Liquid temperature up to +40℃.
· Ambient temperature up to +40℃.
· Max. working pressure: 6 bar.
2d
1
R 1,008.55
SavedSave
The Aquasystem Vertical Pressure Tanks
with replaceable membrane is an element used in hydraulic applications
for sanitary water circuits, such as pressure groups in combination with
pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
precharged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 8 bar
Standard precharge pressure – 1.5 bar
Connection – 1″
2d
1
R 3,844.45
SavedSave
The Aquasystem Vertical Pressure Tanks
With Replaceable Membrane 5L with replaceable membrane is an element
used in hydraulic applications for sanitary water circuits, such as
pressure groups in combination with pumps or devices such as anti-water
hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
precharged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard precharge pressure – 1.5 bar
Connection – 1″
2d
1
R 4,769.05
SavedSave
The Aquasystem Vertical Pressure Tanks
with replaceable membrane is an element used in hydraulic applications
for sanitary water circuits, such as pressure groups in combination with
pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
precharged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard precharge pressure – 1.5 bar
Connection – 1″
2d
1
R 7,243.85
SavedSave
The Aquasystem Vertical Pressure Tanks
with replaceable membrane is an element used in hydraulic applications
for sanitary water circuits, such as pressure groups in combination with
pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
precharged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard precharge pressure – 1.5 bar
Connection – 1″
2d
1
R 12,940.95
SavedSave
The Aquasystem Vertical Pressure Tanks
with replaceable membrane is an element used in hydraulic applications
for sanitary water circuits, such as pressure groups in combination with
pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
precharged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard precharge pressure – 2 bar
Connection – 1 1/2″
2d
1
R 16,504.80
SavedSave
The Aquasystem Vertical Pressure Tanks
with replaceable membrane is an element used in hydraulic applications
for sanitary water circuits, such as pressure groups in combination with
pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
precharged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard precharge pressure – 2 bar
Connection – 1 1/2″
2d
1
R 25,022.85
SavedSave
The Aquasystem Vertical Pressure Tanks
with replaceable membrane is an element used in hydraulic applications
for sanitary water circuits, such as pressure groups in combination with
pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
precharged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard precharge pressure – 2 bar
Connection – 1 1/2″
2d
1
R 4,023.85
SavedSave
The Aquasystem Horizontal Pressure Tank
with replaceable membrane is an element used in hydraulic applications
for sanitary water circuits, such as pressure groups in combination with
pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
precharged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue Epoxy Coated
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard precharge pressure – 1.5 bar
Connection – 1″
2d
1
R 5,071.50
SavedSave
The Aquasystem Horizontal Pressure Tank
with replaceable membrane is an element used in hydraulic applications
for sanitary water circuits, such as pressure groups in combination with
pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
precharged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard precharge pressure – 1.5 bar
Connection – 1″
2d
1
R 7,557.80
SavedSave
The pressure tank with replaceable membrane is an element used in
hydraulic applications for sanitary water circuits, such as pressure
groups in combination with pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
precharged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue Epoxy Coated
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard precharge pressure – 1.5 bar
Connection – 1″
2d
1
R 13,257.20
SavedSave
The Aquasystem Horizontal Pressure Tank with replaceable membrane is
an element used in hydraulic applications for sanitary water circuits,
such as pressure groups in combination with pumps or devices such as
anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
precharged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue Epoxy Coated
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard precharge pressure – 2 bar
Connection – 1 1/4″
2d
1
R 9,381.70
SavedSave
The Aquasystem Vertical Pressure Tanks
with replaceable membrane is an element used in hydraulic applications
for sanitary water circuits, such as pressure groups in combination with
pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
precharged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Galvanized Steel
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard precharge pressure – 2 bar
Connection – 1″
2d
1
R 17,590.40
SavedSave
The Aquasystem Vertical Pressure Tanks
with replaceable membrane is an element used in hydraulic applications
for sanitary water circuits, such as pressure groups in combination with
pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
precharged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Galvanized Steel
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard precharge pressure – 2 bar
Connection – 1 1/4″
2d
1
R 32,570.30
SavedSave
The Aquasystem Vertical Pressure Tanks
with replaceable membrane is an element used in hydraulic applications
for sanitary water circuits, such as pressure groups in combination with
pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
precharged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Galvanized Steel
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard precharge pressure – 2 bar
Connection – 1 1/4″
2d
1
R 2,756.50
SavedSave
The Aquasystem Vertical Pressure Tanks
with replaceable membrane is an element used in hydraulic applications
for sanitary water circuits, such as pressure groups in combination with
pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
precharged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
Stainless Steel FlangeRubber Butile MembraneCapacity for Temperature Extremes -10º to +100ºPainted Counter FlangeHigh Pressure (10 bar)1,5 Standard Precharge Pressure1″ Connection
2d
Successfully Added to List
View and manage your saved ads in your account.