Please note that our Terms & Conditions and Privacy Notice are applicable.
On Promotion in Home & Garden
Pay & Ship
Buy with confidence. Secure payment options & nationwide delivery. Learn more
Filter & refine
Clear All
Suggested
Results for garden shredders in "garden shredders" in Home & Garden Supplies in South Africa in South Africa
1
R 36,071
SavedSave
Please note that shipping and installation is not included.DAB grinder FX submersible pump 2.2kW three phase with a shredder
designed for lifting and transferring wastewater in civil and commercial
environments. Grinder FX is certified EN 12050-1.
The presence of the shredder makes the pump suitable for systems with
small diameter pipes or those requiring high pressures. Shredder in
AISI 630 stainless steel. Ideal pump for replacements thanks to its
reduced dimensions and to both flanged and threaded delivery ports.
Technical Data of the DAB grinder FX submersible pump 2.2kW three phase
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
Construction features of the pump
Pump body and impeller in cast iron, shredder in AISI 630. Motor
shaft in AISI 304 stainless steel. Double mechanical seal in
SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid,
independent of the direction of rotation. Delivery port both flanged and
threaded.
Construction features of the motor
Single-phase asynchronous motor (MA / MNA versions) and three-phase
version motor (TNA versions). The rotor is mounted on lubricated
bearings. Continuous operation in S1 with the motor completely immersed.
Dry running for a maximum time of 10 minutes. Over-temperature sensors
in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase
versions with starter and capacitor in a separate panel, MA versions
with float for automatic operation. In the three-phase motors the
over-temperature sensor connection is responsibility of the user.
4d
Mbombela / Nelspruit
1
R 30,389
SavedSave
Please note that shipping and installation is not included.DAB grinder FX submersible pump 1.1kW three phase with a shredder
designed for lifting and transferring wastewater in civil and commercial
environments. Grinder FX is certified EN 12050-1.
The presence of the shredder makes the pump suitable for systems with
small diameter pipes or those requiring high pressures. Shredder in
AISI 630 stainless steel. Ideal pump for replacements thanks to its
reduced dimensions and to both flanged and threaded delivery ports.
Technical Data of the DAB grinder FX submersible pump 1.1kW three phase
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
Construction features of the pump
Pump body and impeller in cast iron, shredder in AISI 630. Motor
shaft in AISI 304 stainless steel. Double mechanical seal in
SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid,
independent of the direction of rotation. Delivery port both flanged and
threaded.
Construction features of the motor
Single-phase asynchronous motor (MA / MNA versions) and three-phase
version motor (TNA versions). The rotor is mounted on lubricated
bearings. Continuous operation in S1 with the motor completely immersed.
Dry running for a maximum time of 10 minutes. Over-temperature sensors
in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase
versions with starter and capacitor in a separate panel, MA versions
with float for automatic operation. In the three-phase motors the
over-temperature sensor connection is responsibility of the user.
4d
Mbombela / Nelspruit
1
R 28,495
SavedSave
Please note that shipping and installation is not included.DAB grinder FX submersible pump 0.7kW single phase with a shredder
designed for lifting and transferring wastewater in civil and commercial
environments. Grinder FX is certified EN 12050-1.
The presence of the shredder makes the pump suitable for systems with
small diameter pipes or those requiring high pressures. Shredder in
AISI 630 stainless steel. Ideal pump for replacements thanks to its
reduced dimensions and to both flanged and threaded delivery ports.
Technical Data of the DAB grinder FX submersible pump 0.7kW single phase
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 \ ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
Construction features of the pump
Pump body and impeller in cast iron, shredder in AISI 630. Motor
shaft in AISI 304 stainless steel. Double mechanical seal in
SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid,
independent of the direction of rotation. Delivery port both flanged and
threaded.
Construction features of the motorSingle-phase asynchronous motor (MA / MNA versions) and three-phase
version motor (TNA versions). The rotor is mounted on lubricated
bearings. Continuous operation in S1 with the motor completely immersed.
Dry running for a maximum time of 10 minutes. Over-temperature sensors
in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase
versions with starter and capacitor in a separate panel, MA versions
with float for automatic operation. In the three-phase motors the
over-temperature sensor connection is responsibility of the user.
4d
Mbombela / Nelspruit
1
R 34,823
SavedSave
Please note that shipping and installation is not included.DAB grinder FX submersible pump 1.5kW single phase with a shredder
designed for lifting and transferring wastewater in civil and commercial
environments. Grinder FX is certified EN 12050-1.
The presence of the shredder makes the pump suitable for systems with
small diameter pipes or those requiring high pressures. Shredder in
AISI 630 stainless steel. Ideal pump for replacements thanks to its
reduced dimensions and to both flanged and threaded delivery ports.
Technical Data of the DAB grinder FX submersible pump 1.5kW single phase
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
Construction features of the pump
Pump body and impeller in cast iron, shredder in AISI 630. Motor
shaft in AISI 304 stainless steel. Double mechanical seal in
SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid,
independent of the direction of rotation. Delivery port both flanged and
threaded.
Construction features of the motorSingle-phase asynchronous motor (MA / MNA versions) and three-phase
version motor (TNA versions). The rotor is mounted on lubricated
bearings. Continuous operation in S1 with the motor completely immersed.
Dry running for a maximum time of 10 minutes. Over-temperature sensors
in the motor windings with intervention threshold at +130°C.
Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase
versions with starter and capacitor in a separate panel, MA versions
with float for automatic operation. In the three-phase motors the
over-temperature sensor connection is responsibility of the user.
4d
Mbombela / Nelspruit
1
R 31,659.01
SavedSave
Please note that shipping and installation is not included.DAB grinder FX submersible pump 1.1kW single phase with a shredder
designed for lifting and transferring wastewater in civil and commercial
environments. Grinder FX is certified EN 12050-1.
The presence of the shredder makes the pump suitable for systems with
small diameter pipes or those requiring high pressures. Shredder in
AISI 630 stainless steel. Ideal pump for replacements thanks to its
reduced dimensions and to both flanged and threaded delivery ports.
Technical Data of the DAB grinder FX submersible pump 1.1kW single phase
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
Construction features of the pump
Pump body and impeller in cast iron, shredder in AISI 630. Motor
shaft in AISI 304 stainless steel. Double mechanical seal in
SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid,
independent of the direction of rotation. Delivery port both flanged and
threaded.
Construction features of the motor
Single-phase asynchronous motor (MA / MNA versions) and three-phase
version motor (TNA versions). The rotor is mounted on lubricated
bearings. Continuous operation in S1 with the motor completely immersed.
Dry running for a maximum time of 10 minutes. Over-temperature sensors
in the motor windings with intervention threshold at +130°C.
Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase
versions with starter and capacitor in a separate panel, MA versions
with float for automatic operation. In the three-phase motors the
over-temperature sensor connection is responsibility of the user.
4d
Mbombela / Nelspruit
4
R 2,499
NEGOTIABLE
SavedSave
Wood Chipper shredder petrol 5HP garden clean up cut branches shred garden rubbish refuse Deceased Estate item been standing for long. "DOES NOT START" non runner, hardly worked as per pictures.R2499JHB SOUTHWe courier at an extra feeContact: 072 112 9276
17d
VERIFIED
1
R 32,907
SavedSave
Please note that shipping and installation is not included.DAB grinder FX submersible pump 1.5kW three phase with a shredder
designed for lifting and transferring wastewater in civil and commercial
environments. Grinder FX is certified EN 12050-1.
The presence of the shredder makes the pump suitable for systems with
small diameter pipes or those requiring high pressures. Shredder in
AISI 630 stainless steel. Ideal pump for replacements thanks to its
reduced dimensions and to both flanged and threaded delivery ports.
Technical Data of the DAB grinder FX submersible pump 1.5kW three phase
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
Construction features of the pump
Pump body and impeller in cast iron, shredder in AISI 630. Motor
shaft in AISI 304 stainless steel. Double mechanical seal in
SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid,
independent of the direction of rotation. Delivery port both flanged and
threaded.
Construction features of the motorSingle-phase asynchronous motor (MA / MNA versions) and three-phase
version motor (TNA versions). The rotor is mounted on lubricated
bearings. Continuous operation in S1 with the motor completely immersed.
Dry running for a maximum time of 10 minutes. Over-temperature sensors
in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase
versions with starter and capacitor in a separate panel, MA versions
with float for automatic operation. In the three-phase motors the
over-temperature sensor connection is responsibility of the user.
4d
Mbombela / Nelspruit
1
R 27,226
SavedSave
Please note that shipping and installation is not included.DAB grinder FX submersible pump 0.7kW three phase with a shredder
designed for lifting and transferring wastewater in civil and commercial
environments. Grinder FX is certified EN 12050-1.
The presence of the shredder makes the pump suitable for systems with
small diameter pipes or those requiring high pressures. Shredder in
AISI 630 stainless steel. Ideal pump for replacements thanks to its
reduced dimensions and to both flanged and threaded delivery ports.
Technical Data of the DAB grinder FX submersible pump 0.7kW three phase
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
Construction features of the pump
Pump body and impeller in cast iron, shredder in AISI 630. Motor
shaft in AISI 304 stainless steel. Double mechanical seal in
SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid,
independent of the direction of rotation. Delivery port both flanged and
threaded.
Construction features of the motorSingle-phase asynchronous motor (MA / MNA versions) and three-phase
version motor (TNA versions). The rotor is mounted on lubricated
bearings. Continuous operation in S1 with the motor completely immersed.
Dry running for a maximum time of 10 minutes. Over-temperature sensors
in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase
versions with starter and capacitor in a separate panel, MA versions
with float for automatic operation. In the three-phase motors the
over-temperature sensor connection is responsibility of the user.
4d
Mbombela / Nelspruit
1
R 14,582
SavedSave
Please note that shipping and installation is not included.First thing to remember the Feka VS submersible grinder pump 1kW is a
single-stage submersible pump. Incorporating an AISI 630 stainless
steel shredder, designed for transferring untreated wastewater
containing stringy material.
It is suited to settings where a high head is required. Such as in
the case of pipework with a small diameter or where connection to the
public sewer is some distance away. Or when wanting to avoid the risk of
clogging. In addition, with its small footprint and both flanged and
threaded outlet ports, Feka VS Grinder is ideal as a replacement in
existing or outdated systems.
This is further testament to how DAB is attuned to the needs of all
market players, from the installer to the end user. Feka vs submersible
grinder pump 1kW is specifically sized to fully meet the functional,
performance and consumption requirements of the specific applications
for which it has been designed, ensuring maximum performance levels
without wasting energy and economic resources.
Finally wear-resistant materials, such as cast iron and stainless
steel, and performance capable of achieving heads of up to 25 meters,
come together to ensure an increasingly rewarding installation and user
experience, and a longer pump life
Technical Data
Flow rate: From 0 m3h to 14,4 m3hHead: 25 mPumped liquid: Sewage water, gray waterFree passage: N/ALiquid temperature: From 0°C to +40°C for domestic useOutlet: 1’’ 1/2 GAS – DN 32 and DN 40Outlet direction: Horizontal and vertical with curve kit accessoryImpeller: Vortex in cast iron, there is a shredderMotor protection degree: IP 68Thermal classification of the motor insulation: FPower cable type: H07RN8-FPossible type of installation: fixed or mobile in vertical positionMaximum immersion depth: 7 meters
4d
Mbombela / Nelspruit
3
R 5,000
NEGOTIABLE
SavedSave
This machine is used for cutting and shredding forage, grinding grains and husks, shelled corn, sugar cane, cassava branches and also grass.It's still brand new, never been used or assembled. Was bought for R8330 and we're selling it for R5000 ( the price can be negotiated slightly)
19d
Sunnyside & Arcadia
1
R 32,284
SavedSave
Please note that shipping and installation is not included.The DAB Feka FXC submersible
pumps 2.2kW – three phase is a submersible pump designed for wastewater
as well as sewage transfer in both civil and commercial settings. It
features a channel impeller with a 50mm free passage, an anti-blocking
system, and is suitable for handling gray water, rainwater, and
groundwater. The pump is also available in an ATEX version for use in potentially explosive environments.
Pumps with anti-clogging channel impeller. Suitable for drainage and
the transfer of effluent and sewage water, containing solids up to 50mm
with reduced long fiber content.
Technical Data:
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: Loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil waste.Supported liquid temperature (maximum and minimum):+ 50°C (+ 60°C for short period of time) Flanged and threaded: From 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
DAB Feka FXC submersible pumps 2.2kW – three phase with shredder
designed for the drainage of waste water coming from drains in civil and
commercial environments. The pump is certified according to the
wastewater standard EN 12050-1. Pump suitable for fixed installations
with a coupling device or mobile if placed on a base directly on the
bottom of the tank.Thanks to the high-strength grinder, the pump is suitable for
installations with small-diameter pipes or those requiring high
pressures. The pump is designed for quick maintenance thanks to a
constructive solution that provides easy access to the main components
of the pump. Automatic versions with power up to 1,5 kW. ATEX version
available for use in potentially explosive environments.
5d
Mbombela / Nelspruit
1
R 32,768
SavedSave
Please note that shipping and installation is not included.The DAB Feka FXC submersible
pumps 1.5kW – three phase is a submersible pump designed for wastewater
as well as sewage transfer in both civil and commercial settings. It
features a channel impeller with a 50mm free passage, an anti-blocking
system, and is suitable for handling gray water, rainwater, and
groundwater. The pump is also available in an ATEX version for use in potentially explosive environments.
Pumps with anti-clogging channel impeller. Suitable for drainage and
the transfer of effluent and sewage water, containing solids up to 50mm
with reduced long fiber content.
Technical Data:
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: Loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil waste.Supported liquid temperature (maximum and minimum):+ 50°C (+ 60°C for short period of time) Flanged and threaded: From 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 \ ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
DAB Feka FXC submersible pumps 1.5kW – three phase ith shredder
designed for the drainage of waste water coming from drains in civil and
commercial environments. The pump is certified according to the
wastewater standard EN 12050-1. Pump suitable for fixed installations
with a coupling device or mobile if placed on a base directly on the
bottom of the tank.Thanks to the high-strength grinder, the pump is suitable for
installations with small-diameter pipes or those requiring high
pressures. The pump is designed for quick maintenance thanks to a
constructive solution that provides easy access to the main components
of the pump. Automatic versions with power up to 1,5 kW. ATEX version
available for use in potentially explosive environments.
5d
Mbombela / Nelspruit
1
R 29,744
SavedSave
Please note that shipping and installation is not included.The DAB Feka FXC submersible
pumps 1.1kW – three phase is a submersible pump designed for wastewater
as well as sewage transfer in both civil and commercial settings. It
features a channel impeller with a 50mm free passage, an anti-blocking
system, and is suitable for handling gray water, rainwater, and
groundwater. The pump is also available in an ATEX version for use in potentially explosive environments.
Pumps with anti-clogging channel impeller. Suitable for drainage and
the transfer of effluent and sewage water, containing solids up to 50mm
with reduced long fiber content.
Technical Data:
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: Loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil waste.Supported liquid temperature (maximum and minimum):+ 50°C (+ 60°C for short period of time)Flange and threaded: From 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
DAB Feka FXC submersible pumps 1.1kW – three phase with shredder
designed for the drainage of waste water coming from drains in civil and
commercial environments. The pump is certified according to the
wastewater standard EN 12050-1. Pump suitable for fixed installations
with a coupling device or mobile if placed on a base directly on the
bottom of the tank.
Thanks to the high-strength grinder, the pump is suitable for
installations with small-diameter pipes or those requiring high
pressures. The pump is designed for quick maintenance thanks to a
constructive solution that provides easy access to the main components
of the pump. Automatic versions with power up to 1,5 kW. ATEX version
available for use in potentially explosive environments.
5d
Mbombela / Nelspruit
1
R 32,907
SavedSave
Please note that shipping and installation is not included.The DAB Feka FXC submersible
pumps 1.5kW – three phase is a submersible pump designed for wastewater
as well as sewage transfer in both civil and commercial settings. It
features a channel impeller with a 50mm free passage, an anti-blocking
system, and is suitable for handling gray water, rainwater, and
groundwater. The pump is also available in an ATEX version for use in potentially explosive environments.
Pumps with anti-clogging channel impeller. Suitable for drainage and
the transfer of effluent and sewage water, containing solids up to 50mm
with reduced long fiber content.
Technical Data:
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: Loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil waste.Supported liquid temperature (maximum and minimum):+ 50°C (+ 60°C for short period of time) Flanged and threaded: From 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
DAB Feka FXC submersible pumps 1.5kW – three phase ith shredder
designed for the drainage of waste water coming from drains in civil and
commercial environments. The pump is certified according to the
wastewater standard EN 12050-1. Pump suitable for fixed installations
with a coupling device or mobile if placed on a base directly on the
bottom of the tank.Thanks to the high-strength grinder, the pump is suitable for
installations with small-diameter pipes or those requiring high
pressures. The pump is designed for quick maintenance thanks to a
constructive solution that provides easy access to the main components
of the pump. Automatic versions with power up to 1,5 kW. ATEX version
available for use in potentially explosive environments.
5d
Mbombela / Nelspruit
1
R 34,823
SavedSave
Please note that shipping and installation is not included.The DAB Feka FXC submersible
pumps 1.5kW – single phase is a submersible pump designed for wastewater
as well as sewage transfer in both civil and commercial settings. It
features a channel impeller with a 50mm free passage, an anti-blocking
system, and is suitable for handling gray water, rainwater, and
groundwater. The pump is also available in an ATEX version for use in potentially explosive environments.
Pumps with anti-clogging channel impeller. Suitable for drainage and
the transfer of effluent and sewage water, containing solids up to 50mm
with reduced long fiber content.
Technical Data:
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: Loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil waste.Supported liquid temperature (maximum and minimum):+ 50°C (+ 60°C for short period of time) Flanged and threaded: From 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
DAB Feka FXC submersible pumps 1.5kW – single phase with shredder
designed for the drainage of waste water coming from drains in civil and
commercial environments. The pump is certified according to the
wastewater standard EN 12050-1. Pump suitable for fixed installations
with a coupling device or mobile if placed on a base directly on the
bottom of the tank.Thanks to the high-strength grinder, the pump is suitable for
installations with small-diameter pipes or those requiring high
pressures. The pump is designed for quick maintenance thanks to a
constructive solution that provides easy access to the main components
of the pump. Automatic versions with power up to 1,5 kW. ATEX version
available for use in potentially explosive environments.
5d
Mbombela / Nelspruit
1
R 27,226
SavedSave
Please note that shipping and installation is not included.The DAB Feka FXC submersible
pumps 0.7kW – single phase is a submersible pump designed for wastewater
as well as sewage transfer in both civil and commercial settings. It
features a channel impeller with a 50mm free passage, an anti-blocking
system, and is suitable for handling gray water, rainwater, and
groundwater. The pump is also available in an ATEX version for use in potentially explosive environments.
Pumps with anti-clogging channel impeller. Suitable for drainage and
the transfer of effluent and sewage water, containing solids up to 50mm
with reduced long fiber content.
Technical Data:
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: Loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil waste.Supported liquid temperature (maximum and minimum):+ 50°C (+ 60°C for short period of time) Flanged and threaded: From 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
DAB Feka FXC submersible pumps 0.7kW – single phase with shredder
designed for the drainage of waste water coming from drains in civil and
commercial environments. The pump is certified according to the
wastewater standard EN 12050-1. Pump suitable for fixed installations
with a coupling device or mobile if placed on a base directly on the
bottom of the tank.Thanks to the high-strength grinder, the pump is suitable for
installations with small-diameter pipes or those requiring high
pressures. The pump is designed for quick maintenance thanks to a
constructive solution that provides easy access to the main components
of the pump. Automatic versions with power up to 1,5 kW. ATEX version
available for use in potentially explosive environments.
5d
Mbombela / Nelspruit
1
R 29,744
SavedSave
Please note that shipping and installation is not included.The DAB Feka FXC submersible
pumps 1.1kW – single phase is a submersible pump designed for wastewater
as well as sewage transfer in both civil and commercial settings. It
features a channel impeller with a 50mm free passage, an anti-blocking
system, and is suitable for handling gray water, rainwater, and
groundwater. The pump is also available in an ATEX version for use in potentially explosive environments.
Pumps with anti-clogging channel impeller. Suitable for drainage and
the transfer of effluent and sewage water, containing solids up to 50mm
with reduced long fiber content.
Technical Data:
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: Loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil waste.Supported liquid temperature (maximum and minimum):+ 50°C (+ 60°C for short period of time)Flange and threaded: From 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
DAB Feka FXC submersible pumps 1.1kW – single phase with shredder
designed for the drainage of waste water coming from drains in civil and
commercial environments. The pump is certified according to the
wastewater standard EN 12050-1. Pump suitable for fixed installations
with a coupling device or mobile if placed on a base directly on the
bottom of the tank.Thanks to the high-strength grinder, the pump is suitable for
installations with small-diameter pipes or those requiring high
pressures. The pump is designed for quick maintenance thanks to a
constructive solution that provides easy access to the main components
of the pump. Automatic versions with power up to 1,5 kW. ATEX version
available for use in potentially explosive environments.
5d
Mbombela / Nelspruit
10
R 1,250
SavedSave
Working + Gently used + 900W
✅ Excellent working condition, includes all attachments & accessories, with original box
⚠️ Discolouration on machine body
Pickup Parkmore, Sandton
Brand: Tefal
Power: 900W
Capacity: 4L
Bowl material: Stainless steel
Attachments: Balloon whisk, flat beater, dough hook
Accessories: 1.5L blender, slicer/shredder, splashguard
In excellent working condition
Gently used and motor like new
Used on light batters only
Discolouration on the machine body from sitting on a kitchen counter
Accessories were never used
1mo
VERIFIED
4
R 700
NEGOTIABLE
SavedSave
Used shredder in good working condition, great for leaves
3mo
Scottburgh
3
R 55,000
SavedSave
Sprue crusher/Shredder available in perfect working condition
R55 000
WhatsApp/call Leon on 0743119066
3mo
Save this search and get notified
when new items are posted!