Please note that our Terms & Conditions and Privacy Notice are applicable.
On Promotion in Home & Garden
Pay & Ship
Buy with confidence. Secure payment options & nationwide delivery. Learn more
Filter & refine
Clear All
Suggested
Results for electric motors in "electric motors" in Home & Garden Supplies in South Africa in South Africa
12
Negotiable
SavedSave
We are manufacturers, suppliers and installers of hot dip galvanized palisade gates and fencing ...
We also install gate motors, electric fence, cctv cameras, alarm systems
5d
1
R 8,352
SavedSave
Please note that shipping and installation is not included.Firstly Stainless steel DAB Feka vs submersible pumps 0.55kW – three
phase with micro cast steel liquid vortex impeller, suitable for lifting
sewage and drain water in general containing solid matter with size up
to 50 mm.
Construction Features Of The Pump
AISI 304 stainless steel pump body, seal cover, motor cover, and cap
with handle insulating rubber coated. Micro cast steel impeller.
Insulating rubber covered handle. AISI 316 stainless steel motor shaft.
Double mechanical seal with interposed oil chamber (non-toxic oil) in
carbon-alumina on the motor side, and silicon carbide/silicon carbide on
the pump side. Mechanical seal: Silicon Carbide
Construction Features Of The Motor
Dry, asynchronous and waterproof motor, cooled by the pumped liquid.
Rotor running on permanently lubricated ball bearings, selected to
ensure low noise and durability. Over current protection as standard for
the single-phase version, optional for the three-phase version.
Permanently connected capacitor in the single-phase version.
Continuous duty with liquid temperature 35 °C and completely
submerged pump. The single-phase version can be supplied with float for
automatic operation. Mechanical seal: Carbon/Alumina
DAB Feka vs submersible pumps 0.55kW – three phase Number of poles: 2 Max starts/hour: 20
Operating range: From 0 to 32 m3/h with head up to 14 meters.
Pumped liquid: Sewage water and used water in general, non aggressive.
Free passage: 50 mm.
Liquid temperature range: From 0 °C to +35 °C for domestic use (EN 60335-2-41). From 0 °C to +50 °C for other uses.
Maximum ambient temperature for operation with motor above water: +40 °C
Maximum immersion depth: 7 meters.
Motor protection class: IP 68
Insulation class: F
Power Inputs: 3 x 400 V ~
Installation: Fixed or portable, vertical position
Power Cable: 10 meter H07RN-F, with plug for the single phase version.
Input Voltage A: 1.64
Output Voltage A: 11HP: 0.75
8d
Mbombela / Nelspruit
1
R 11,779
SavedSave
Please note that shipping and installation is not included.Firstly Stainless steel Feka vs submersible pumps 1kW – single phase
with micro cast steel liquid vortex impeller, suitable for lifting
sewage and drain water in general containing solid matter with size up
to 50 mm.
Construction Features Of The Pump
AISI 304 stainless steel pump body, seal cover, motor cover, and cap
with handle insulating rubber coated. Micro cast steel impeller.
Insulating rubber covered handle. AISI 316 stainless steel motor shaft.
Double mechanical seal with interposed oil chamber (non-toxic oil) in
carbon-alumina on the motor side, and silicon carbide/silicon carbide on
the pump side. Mechanical seal: Silicon Carbide
Construction Features Of The Motor
Dry, asynchronous and waterproof motor, cooled by the pumped liquid.
Rotor running on permanently lubricated ball bearings, selected to
ensure low noise and durability. Over current protection as standard for
the single-phase version, optional for the three-phase version.
Permanently connected capacitor in the single-phase version.
Continuous duty with liquid temperature 35 °C and completely
submerged pump. The single-phase version can be supplied with float for
automatic operation. Mechanical seal: Carbon/Alumina.
DAB Feka vs submersible pumps 1kW – single phase Number of poles: 2 Max starts/hour: 20
Operating range: From 0 to 32 m3/h with head up to 14 meters.
Pumped liquid: Sewage water and used water in general, non aggressive.
Free passage: 50 mm.
Liquid temperature range: From 0 °C to +35 °C for domestic use (EN 60335-2-41). From 0 °C to +50 °C for other uses.
Maximum ambient temperature for operation with motor above water: +40 °C
Maximum immersion depth: 7 meters.
Motor protection class: IP 68
Insulation class: F
Power Inputs: 1 x 220 V -240 V – 50Hz single phase
Installation: Fixed or portable, vertical position
Power Cable: 10 meter H07RN-F, with plug for the single phase version.
Input Voltage A: 6.63
Output Voltage A: 31HP: 1.36
8d
Mbombela / Nelspruit
2
R 2,250
NEGOTIABLE
SavedSave
Wooden garage door and Coromaster elecric door openerWooden door, 2.36w x 2.15h. Good condition. Includes springs.
3d
University Estate
12
Negotiable
SavedSave
Assortment of ET 500 gate motor spares as per images advertised. Soldindividually or as a lot. 2 Only ET 500 gate motor electric motors with worm gears R650 each.2 Only ET 500 gate motor covers. R250 each.1 Only ET 500 gate motor bare chassis with manual locking door. R400.1 Only ET 500 gate motor base plate with new bolts, nuts and washes. R250.1 Only ET 500 gate motor 17 tooth drive shaft outer gear. R250.1 Only ET 500 gate motor drive shaft inner gear. R150.1 Only ET 500 gate motor transformer with PC board enclosure and transformer enclosure. R250.1 Only ET 500 gate motor PC board enclosure and transformer enclosure. R100.2 Only ET 500 gate motor PC boards. Damaged and need repairing. R200 each. All individual prices negotiable upon viewing. Or upon viewing make an offer for the lot. Prospective buyers to view and pick up in Pietermaritzburg upon purchasing.If the ad appears then they are available.
13d
Pietermaritzburg
8
Contact f/price
SavedSave
We install, maintain and repair gate
motors (slide and swing gate), garage door motors, electric fencing, intercoms,
traffic barriers, CCTV, electric locks & access control. Our goal is to give
you peace of mind, convenience, and well supported solutions that adds value to
your property and simplifies your daily routine.
Most
areas in Cape Town and surrounds
Cell 079 714 2598
16d
VERIFIED
7
R 19,499
NEGOTIABLE
SavedSave
Juice Extractor Separates Juice & Pulp for Crushing Fruit dewatering machine alcohol fermentation pulp. Ideal for making mampoer, witblits, moonshine or even fresh fruit juice. Industrial electric motor liquidiser.Very Good Condition.R19 499JHB SOUTH.Courier at an extra fee.Contact: 072 112 9276
16h
VERIFIED
6
Contact f/price
SavedSave
We install, maintain and repair gate
motors (slide and swing gate), garage door motors, electric fencing, intercoms,
traffic barriers, CCTV, electric locks & access control. Our goal is to give
you peace of mind, convenience, and well supported solutions that adds value to
your property and simplifies your daily routine.
Most
areas in Cape Town and surrounds
Cell 079 714 2598
16d
VERIFIED
4
R 700
NEGOTIABLE
SavedSave
Upgrade your
toolkit with this powerful Ryobi CS-216 chainsaw, perfect for garden and
DIY projects.
Features
Model: Ryobi CS-216Blade Length: 400mm (16")Motor Power: 2000 watts – strong and
reliable.Condition: Only used once – practically
brand new.Electric powered – no fuel hassle, just plug in
and go.Ideal for cutting firewood,
trimming trees, or heavy-duty yard work.
Condition
Immaculate – looks and works like new.
Serious
inquiries only.
8d
VERIFIED
3
R 1,200
SavedSave
Makita UB 1100 Industrial Electric 600W Dust BlowerDescription:Powerful motor. 600WOperation free from static electricity.With optional dust bag allows to use as a vacuum.Does not come with dust bag.Double InsulationSpecifications:Continuous rating Input: 600WAir volume: 2.8m3/minAir pressure: 5.5kpa (560mm H2O)No load speed (rpm): 16,000Brand New in Box, Never Been Used. Only R1200.00 cash/eft - Retails R1600+Call or Whatsapp/Signal Messenger Kevin on 074 963 7344 (8am-8pm 7 Days) Unfortunately SMS's & Emails are Blocked!*Conveniently Situated in Parow, just off Voortrekker Road*Confirm Availability When Ready To View, Many Other Tools Available "VIEW PROFILE".Viewing Strictly By Appointment Only.**WARNING: I'm Not Affiliated To Anyone Else Selling Tools On Gumtree Or Anywhere**
3d
1
R 10,000
NEGOTIABLE
SavedSave
Plumbing or electrical tubing wall chasing/cutting machine.
NO DUST, uses water.
Cutting re-enforced concrete and brick.
Cutting depth 33mm wide x 35mm deep using multiple blades.
3000W Soft Start Motor.
Machine never been used.
14d
Velddrif
1
R 6,583
SavedSave
Please note that shipping and installation is not included.Firstly the DAB jet self-priming cast iron pump 1kW – three phase
with excellent suction capacity even in the presence of air bubbles.
Suitable for pumping water with low levels of sandy impurities.
Especially used in domestic water supply installations.
Suitable for small farms and gardening, small scale industrial
services and where self priming is necessary. Complete of ejector and
diffuser for high priming capability. Suitable for sucking from well up
to 9 meter, provided in 3 different material pump body: cast-iron,
stainless steel and techno polymer.
Constructional features of the DAB jet self-priming cast iron pump 1kW – three phase :
Cast-iron 200 UNI ISO 185Motor support in die cast aluminum.Impeller, diffuser, venturi tube and sand guard in techno polymerStainless steel wear ring.Carbon/ceramic mechanical seal
Constructional features of the motor:
Asynchronous type, closed, with external air cooling.Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life.Incorporated thermo amperometric protection and permanently inserted capacitor in the single phase version.It is recommended to use overload protection for three phase motor protection, in compliance with current legislation.Manufactured pursuant to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
Operating range:
From 0.4 to 10.5 m3/h with head up to 62 meters.
Liquid temperature range:
For domestic use: from 0°C to +35°C (EN 60335-2-41)
For other use: from 0°C to +40°C
Self-priming: Up to 9 meter.
Maximum ambient temperature: +40°C
Maximum operating pressure: 8 bar (800 kPa)
Installation: fixed in a horizontal position.
Max liquid temperature: 40°C.
Standard input voltage: Single phase 220/240 VThree phase 230/400 V
9d
Mbombela / Nelspruit
1
R 6,081
SavedSave
Please note that shipping and installation is not included.Firstly the DAB jet self-priming cast iron pump 0.75kW – three phase
with excellent suction capacity even in the presence of air bubbles.
Important to realize it is suitable for pumping water with low levels of
sandy impurities. Especially used in domestic water supply
installations.
Afterwards it is suitable for small farms and gardening, small scale
industrial services and where self priming is necessary. For the purpose
of complete of ejector and diffuser for high priming capability.
Suitable for sucking from well up to 9 meter, provided in 3 different
material pump body: cast-iron, stainless steel and techno polymer.
Constructional features of the DAB jet self-priming cast iron pump 0.75kW – three phase:
Cast-iron 200 UNI ISO 185Motor support in die cast aluminum.Impeller, diffuser, venturi tube and sand guard in techno polymerStainless steel wear ring.Carbon/ceramic mechanical sealInlet: 1″Outlet: 1″
Constructional features of the motor:
Asynchronous type, closed, with external air cooling.Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life.Incorporated thermo amperometric protection and permanently inserted capacitor in the single phase version.It is recommended to use overload protection for three phase motor protection, in compliance with current legislation.Manufactured pursuant to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
Operating range:
From 0.4 to 10.5 m3/h with head up to 62 meters.
Liquid temperature range:
For domestic use: from 0°C to +35°C (EN 60335-2-41)
For other use: from 0°C to +40°C
Self-priming: Up to 9 meter.
Maximum ambient temperature: +40°C
Maximum operating pressure: 8 bar (800 kPa)
Installation: fixed in a horizontal position.
Max liquid temperature: 40°C.
Standard input voltage: Single phase 220/240 VThree phase 230/400 V
9d
Mbombela / Nelspruit
1
R 12,787
SavedSave
Please note that shipping and installation is not included.Firstly the DAB jet self-priming cast iron pump 2.2kW – single phase
with excellent suction capacity even in the presence of air bubbles.
Important to realize it is suitable for pumping water with low levels of
sandy impurities. Especially used in domestic water supply
installations.
Afterwards it is suitable for small farms and gardening, small scale
industrial services and where self priming is necessary. For the purpose
of complete of ejector and diffuser for high priming capability.
Suitable for sucking from well up to 9 meter, provided in 3 different
material pump body: cast-iron, stainless steel and techno polymer.
Constructional features of the DAB jet self-priming cast iron pump 2.2kW – single phase :
Cast-iron 200 UNI ISO 185Motor support in die cast aluminum.Impeller, diffuser, venturi tube and sand guard in techno polymerStainless steel wear ring.Carbon/ceramic mechanical sealInlet: 1″Outlet: 1″
Constructional features of the motor:
Asynchronous type, closed, with external air cooling.Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life.Incorporated thermo amperometric protection and permanently inserted capacitor in the single phase version.It is recommended to use overload protection for three phase motor protection, in compliance with current legislation.Manufactured pursuant to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
Operating range:
From 0.4 to 10.5 m3/h with head up to 62 meters.
Liquid temperature range:
For domestic use: from 0°C to +35°C (EN 60335-2-41)
For other use: from 0°C to +40°C
Self-priming: Up to 9 meter.
Maximum ambient temperature: +40°C
Maximum operating pressure: 8 bar (800 kPa)
Installation: fixed in a horizontal position.
Max liquid temperature: 40°C.
Standard input voltage: Single phase 220/240 VThree phase 230/400 V
9d
Mbombela / Nelspruit
1
R 13,900
SavedSave
Please note that shipping and installation is not included.Firstly the DAB jet self-priming cast iron pump 1.8kW – single phase
with excellent suction capacity even in the presence of air bubbles.
Important to realize it is suitable for pumping water with low levels of
sandy impurities. Especially used in domestic water supply
installations.
After wards it is suitable for small farms and gardening, small scale
industrial services and where self priming is necessary. For the purpose
of complete of ejector and diffuser for high priming capability.
Suitable for sucking from well up to 9 meter, provided in 3 different
material pump body: cast-iron, stainless steel and techno polymer.
Constructional features of the DAB jet self-priming cast iron pump 1.8kW – single phase :
Cast-iron 200 UNI ISO 185Motor support in die cast aluminum.Impeller, diffuser, venturi tube and sand guard in techno polymerStainless steel wear ring.Carbon/ceramic mechanical sealInlet: 1″Outlet: 1″
Constructional features of the motor:
Asynchronous type, closed, with external air cooling.Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life.Incorporated thermo amperometric protection and permanently inserted capacitor in the single phase version.It is recommended to use overload protection for three phase motor protection, in compliance with current legislation.Manufactured pursuant to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
Operating range:
From 0.4 to 10.5 m3/h with head up to 62 meters.
Liquid temperature range:
For domestic use: from 0°C to +35°C (EN 60335-2-41)
For other use: from 0°C to +40°C
Self-priming: Up to 9 meter.
Maximum ambient temperature: +40°C
Maximum operating pressure: 8 bar (800 kPa)
Installation: fixed in a horizontal position.
Max liquid temperature: 40°C.
Standard input voltage: Single phase 220/240 VThree phase 230/400 V
9d
Mbombela / Nelspruit
1
R 4,691
SavedSave
Please note that shipping and installation is not included.Firstly the DAB jet self-priming cast iron pump 0.44kW – single phase
with excellent suction capacity even in the presence of air bubbles.
Suitable for pumping water with low levels of sandy impurities.
Especially used in domestic water supply installations.
Suitable for small farms and gardening, small scale industrial
services and where self priming is necessary. Complete of ejector and
diffuser for high priming capability. Suitable for sucking from well up
to 9 meter, provided in 3 different material pump body: cast-iron,
stainless steel and techno polymer.
Constructional features of the DAB jet self-priming cast iron pump 0.44kW – single phase:
Cast-iron 200 UNI ISO 185Motor support in die cast aluminum.Impeller, diffuser, venturi tube and sand guard in techno polymerStainless steel wear ring.Carbon/ceramic mechanical seal
Constructional features of the motor:
Asynchronous type, closed, with external air cooling.Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life.Incorporated thermo amperometric protection and permanently inserted capacitor in the single phase version.It is recommended to use overload protection for three phase motor protection, in compliance with current legislation.Manufactured pursuant to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
Operating range:
From 0.4 to 10.5 m3/h with head up to 62 meters.
Liquid temperature range:
For domestic use: from 0°C to +35°C (EN 60335-2-41)
For other use: from 0°C to +40°C
Self-priming: Up to 9 meter.
Maximum ambient temperature: +40°C
Maximum operating pressure: 8 bar (800 kPa)
Installation: fixed in a horizontal position.
Max liquid temperature: 40°C.
Standard input voltage: Single phase 220/240 VThree phase 230/400 V
9d
Mbombela / Nelspruit
1
R 12,332
SavedSave
Please note that shipping and installation is not included.Firstly the DAB jet self-priming cast iron pump 2.2kW – three phase
with excellent suction capacity even in the presence of air bubbles.
Important to realize it is suitable for pumping water with low levels of
sandy impurities. Especially used in domestic water supply
installations.
Afterwards it is suitable for small farms and gardening, small scale
industrial services and where self priming is necessary. For the purpose
of complete of ejector and diffuser for high priming capability.
Suitable for sucking from well up to 9 meter, provided in 3 different
material pump body: cast-iron, stainless steel and techno polymer.
Constructional features of the DAB jet self-priming cast iron pump 2.2kW – three phase :
Cast-iron 200 UNI ISO 185Motor support in die cast aluminum.Impeller, diffuser, venturi tube and sand guard in techno polymerStainless steel wear ring.Carbon/ceramic mechanical sealInlet: 1″Outlet: 1″
Constructional features of the motor:
Asynchronous type, closed, with external air cooling.Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life.Incorporated thermo amperometric protection and permanently inserted capacitor in the single phase version.It is recommended to use overload protection for three phase motor protection, in compliance with current legislation.Manufactured pursuant to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
Operating range:
From 0.4 to 10.5 m3/h with head up to 62 meters.
Liquid temperature range:
For domestic use: from 0°C to +35°C (EN 60335-2-41)
For other use: from 0°C to +40°C
Self-priming: Up to 9 meter.
Maximum ambient temperature: +40°C
Maximum operating pressure: 8 bar (800 kPa)
Installation: fixed in a horizontal position.
Max liquid temperature: 40°C.
Standard input voltage: Single phase 220/240 VThree phase 230/400 V
9d
Mbombela / Nelspruit
1
R 12,150.85
SavedSave
Please note that shipping and installation is not included.Firstly the DAB jet self-priming cast iron pump 1.5kW – single phase
with excellent suction capacity even in the presence of air bubbles.
Suitable for pumping water with low levels of sandy impurities.
Especially used in domestic water supply installations.
Suitable for small farms and gardening, small scale industrial
services and where self priming is necessary. Complete of ejector and
diffuser for high priming capability. Suitable for sucking from well up
to 9 meter, provided in 3 different material pump body: cast-iron,
stainless steel and techno polymer.
Constructional features of the DAB jet self-priming cast iron pump 1.5kW – single phase :
Cast-iron 200 UNI ISO 185Motor support in die cast aluminum.Impeller, diffuser, venturi tube and sand guard in techno polymerStainless steel wear ring.Carbon/ceramic mechanical seal
Constructional features of the motor:
Asynchronous type, closed, with external air cooling.Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life.Incorporated thermo amperometric protection and permanently inserted capacitor in the single phase version.It is recommended to use overload protection for three phase motor protection, in compliance with current legislation.Manufactured pursuant to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
Operating range:
From 0.4 to 10.5 m3/h with head up to 62 meters.
Liquid temperature range:
For domestic use: from 0°C to +35°C (EN 60335-2-41)
For other use: from 0°C to +40°C
Self-priming: Up to 9 meter.
Maximum ambient temperature: +40°C
Maximum operating pressure: 8 bar (800 kPa)
Installation: fixed in a horizontal position.
Max liquid temperature: 40°C.
Standard input voltage: Single phase 220/240 VThree phase 230/400 V
9d
Mbombela / Nelspruit
1
R 4,713
SavedSave
Please note that shipping and installation is not included.Firstly the DAB jet self-priming cast iron pump 0.6kW – single phase
with excellent suction capacity even in the presence of air bubbles.
Suitable for pumping water with low levels of sandy impurities.
Especially used in domestic water supply installations.
Suitable for small farms and gardening, small scale industrial
services and where self priming is necessary. Complete of ejector and
diffuser for high priming capability. Suitable for sucking from well up
to 9 meter, provided in 3 different material pump body: cast-iron,
stainless steel and techno polymer.
Constructional features of the DAB jet self-priming cast iron pump 0.6kW – single phase :
Cast-iron 200 UNI ISO 185Motor support in die cast aluminum.Impeller, diffuser, venturi tube and sand guard in techno polymerStainless steel wear ring.Carbon/ceramic mechanical seal
Constructional features of the motor:
Asynchronous type, closed, with external air cooling.Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life.Incorporated thermo amperometric protection and permanently inserted capacitor in the single phase version.It is recommended to use overload protection for three phase motor protection, in compliance with current legislation.Manufactured pursuant to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
Operating range:
From 0.4 to 10.5 m3/h with head up to 62 meters.
Liquid temperature range:
For domestic use: from 0°C to +35°C (EN 60335-2-41)
For other use: from 0°C to +40°C
Self-priming: Up to 9 meter.
Maximum ambient temperature: +40°C
Maximum operating pressure: 8 bar (800 kPa)
Installation: fixed in a horizontal position.
Max liquid temperature: 40°C.
Standard input voltage: Single phase 220/240 VThree phase 230/400 V
9d
Mbombela / Nelspruit
1
R 12,060
SavedSave
Please note that shipping and installation is not included.Firstly the DAB jet self-priming cast iron pump 1.1kW – single phase
with excellent suction capacity even in the presence of air bubbles.
Important to realize it is suitable for pumping water with low levels of
sandy impurities. Especially used in domestic water supply
installations.
Afterwards it is suitable for small farms and gardening, small scale
industrial services and where self priming is necessary. For the purpose
of complete of ejector and diffuser for high priming capability.
Suitable for sucking from well up to 9 meter, provided in 3 different
material pump body: cast-iron, stainless steel and techno polymer.
Constructional features of the DAB jet self-priming cast iron pump 1.1kW – single phase:
Cast-iron 200 UNI ISO 185Motor support in die cast aluminum.Impeller, diffuser, venturi tube and sand guard in techno polymerStainless steel wear ring.Carbon/ceramic mechanical sealInlet: 1″Outlet: 1″
Constructional features of the motor:
Asynchronous type, closed, with external air cooling.Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life.Incorporated thermo amperometric protection and permanently inserted capacitor in the single phase version.It is recommended to use overload protection for three phase motor protection, in compliance with current legislation.Manufactured pursuant to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
Operating range:
From 0.4 to 10.5 m3/h with head up to 62 meters.
Liquid temperature range:
For domestic use: from 0°C to +35°C (EN 60335-2-41)
For other use: from 0°C to +40°C
Self-priming: Up to 9 meter.
Maximum ambient temperature: +40°C
Maximum operating pressure: 8 bar (800 kPa)
Installation: fixed in a horizontal position.
Max liquid temperature: 40°C.
Standard input voltage: Single phase 220/240 V
Three phase 230/400 V
9d
Mbombela / NelspruitSave this search and get notified
when new items are posted!