Please note that our Terms & Conditions and Privacy Notice are applicable.
On Promotion in Home & Garden
Pay & Ship
Buy with confidence. Secure payment options & nationwide delivery. Learn more
Filter & refine
Clear All
Suggested
Results for cast iron in "cast iron" in Home & Garden Supplies in South Africa in South Africa
11
R 2,800
SavedSave
Air compressor @10 CFM 1.5hp with 150 litre tank works very well with cast iron swan pumpUnfortunately I broke the casing of the pressure switch and had to mguiver a switch with case and small wood dowel that switches it on and off.this has worked very well for 3+ years but understand that prospective purchaser won't like that set up.i do have a replacement pressure switch with on off switch which I will put with the machine for buyer to swap over themselves(I had a stroke 2 years ago which is why I haven't done it myself)Selling this air compressor with the replacement pressure switch for a NON NEGOTIABLE price of R2800Do not offer me lower price offers I will not accept and if needed I will block you.Please only call 081 750 5325 no messages only calls
4d
Lansdowne3
R 1,550
SavedSave
Le Creuset 26cm enameled cast iron skillet in Coastal Blue.
Used only twice condition is almost new. No chips, scratches, or damage.
Premium enameled cast iron
Excellent heat retention
Suitable for stovetop and oven use
Timeless coastal blue colour
Retail price is around R3 600+, so this is a great deal.
Serious buyers welcome. Message for more photos.
5d
Pay & Ship
3
R 485
SavedSave
Typhoon Cast Iron and Eetrite Cast Iron Enamel Steak Skillets.
Excellent.
Courier Delivery Arranged for out of town buyer at Buyer’s Cost.
The Typhoon Rectangular Cast Iron Skillet with Stainless Steel Handle is :
350mm long.
200mm wide.
25mm deep.
R485.
The Eetrite Square Cast Iron and Enamel Steak Skillet is:
240mm wide.
240mm long.
30mm deep.
R485.
Or R900 for both.
If this advert is still on then one or both steak skillets are still available.
Please call or WhatsApp 0825731624
15d
Port Elizabeth2
Negotiable
SavedSave
Le Creuset Signature 23cm cast iron skillet in Flint.
Barely used (twice). Excellent condition.
Premium enameled cast iron
Even heat distribution
Oven safe
Modern neutral grey Flint colour
Retail price R3 500+. Selling well below retail.
Available immediately for +/- R2000
5d
1
R 500
SavedSave
CASH - COLLECT IN: DIE BOS, STRANDCooking Zones: Combines 4 gas burners with 1/2 electric for cooking versatility. Design: Features a stainless steel top with sturdy cast iron pan supports.Ignition & Safety: Equipped with automatic electronic ignition and safety valves that cut off the gas supply if the flame goes out.
7d
2
R 6,000
NEGOTIABLE
SavedSave
The Alva Mojave 4-Burner Drop-In Gas BBQ (GSS4BTT) is a premium, stainless steel built-in unit featuring a tempered glass hood, electric ignition, and cast-iron cooking grids, designed for high-performance outdoor cooking. It offers a large, roughly 650mm x 420mm cooking area, making it ideal for entertaining.
Key Features & Specifications:
Design: Durable stainless steel construction with a sleek glass hood for monitoring food.
Burners: 4 stainless steel burners with electric ignition.
Cooking Surface: Robust cast-iron cooking grids.
Convenience: Features illuminated control knobs and a built-in thermometer.
Installation: Drop-in design, ideal for custom-built outdoor kitchens.
Gas Type: Uses LPG (liquefied petroleum gas).
Dimensions: Approximately
80 cm x48.5cm x 59cm
Designed to work with a 9kg cylinder (not included) and provides a stylish, efficient, and durable solution for, as described by Instagram users, "sizzling braai" or, as per Sahara BBQs blog,, "stone-baked pizza".
Nearest cash offer accepted
Collection only
1d
VERIFIED
10
Negotiable
SavedSave
Good condition cast iron bathtub (freestanding), wash hand basins plus taps (including Cobra telephone shower mixers) to clear as a job lot or sold separately.
PHONE: HAMMOND 0833275688
8d
Westville11
R 450
NEGOTIABLE
SavedSave
3 x Cast Iron Pots 1 x BestDuty 3-leg Pot #3 (serves about 10-14 people)@ R9501 x JMI 3-leg Pot #2 (serves about 4-6 people)@R5501 x BestDuty 3-leg Pot #1 (serves about 3-6 people)@R450Selling individually or as set for R1700Can arrange pick up/delivery in Gauteng areaContact Nora 081 569 9665
5d
VERIFIED
1
R 6,060
SavedSave
Please note that shipping and installation is not included.DAB centrifugal double impeller K pump 0.75kW – single phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.CONSTRUCTION FEATURES OF THE PUMPPump body and motor support in cast iron.Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTORClosed asynchronous type, external ventilation cooling.Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.DAB centrifugal double impeller K pump 0.75kW – single phaseMaximum operating pressure: 6 bar (600 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.Standard voltage: Three-phase 220 V -240 VCONSTRUCTION FEATURES OF THE PUMP
Inlet: 1″Outlet: 1″Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
6d
Mbombela / Nelspruit7
R 13,000
NEGOTIABLE
SavedSave
Elevate your home with the iconic Morsø 6140. Professionally refurbished to a high standard, this cast-iron wood burner offers the perfect blend of modern Danish minimalism and exceptional heating performance.Specifications:Condition: Newly refurbished, cleaned, and serviced.Heating Area: 45 m² – 60 m².Output: 5 kW Nominal / 6 kW Max.Design: Minimalist low base with hidden hinges and a large stay-clean glass door.Efficiency: A+ Rated (80%+ efficiency) for low wood consumption.Material: Premium recycled cast iron for superior heat retention.Height (mm)753Width (mm)451Depth (mm)386Price: R13,000 (Fireplace only)
(Retail price new: R59,999—save over R46,999!!!)Installation and flue pipes also have an 8% discount before the end of April!!
5d
1
R 18,788
SavedSave
Please note that shipping and installation is not included.DAB centrifugal double impeller K pump 2.2kW – single phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller. As can been seen on data sheetCarbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.DAB centrifugal double impeller K pump 2.2kW – single phaseMaximum operating pressure: 10 bar (1000 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.
Standard voltage: Three-phase 220-240 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 1.1/2″
Outlet: 1″Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
7d
Mbombela / Nelspruit1
R 7,576
SavedSave
Please note that shipping and installation is not included.DAB centrifugal double impeller K pump 0.75kW – three phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal double impeller K pump 0.75kW – three phase.Maximum operating pressure: 6 bar (600 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.
Standard voltage: Three-phase 230 V -400 V
CONSTRUCTION FEATURES OF THE PUMPInlet: 1″Outlet: 1″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
7d
Mbombela / Nelspruit1
R 9,273
SavedSave
Please note that shipping and installation is not included.DAB Centrifugal double impeller K pump 1.1kW – three phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller. As can been seen on data sheetCarbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB Centrifugal double impeller K pump 1.1kW – three phaseMaximum operating pressure: 8 bar (800 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.Standard voltage: Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMPInlet: 1.1/4″Outlet: 1″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
7d
Mbombela / Nelspruit1
R 9,393
SavedSave
Please note that shipping and installation is not included.DAB centrifugal double impeller K pump 1.1kW – three phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller. As can been seen on data sheetCarbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal double impeller K pump 1.1kW – three phaseMaximum operating pressure: 6 bar (600 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.
Standard voltage: Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 1.1/2″Outlet: 1″Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
7d
Mbombela / Nelspruit1
R 10,607
SavedSave
Please note that shipping and installation is not included.DAB centrifugal double impeller K pump 1.8kW – three phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal double impeller K pump 1.8kW – three phaseMaximum operating pressure: 8 bar (800 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.Standard voltage: Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 1.1/4″Outlet: 1″Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
7d
Mbombela / Nelspruit1
R 20,000
SavedSave
Please note that shipping and installation is not included.DAB centrifugal double impeller K pump 4kW – three phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller. As can been seen on data sheet
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTORRotor running on ball bearings, oversized to ensure low noise and durability.Closed asynchronous type, external ventilation cooling.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.DAB centrifugal double impeller K pump 4kW – three phaseMaximum operating pressure: 12 bar (1200 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.
Standard voltage: Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 1.1/2″Outlet: 1″
Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
7d
Mbombela / Nelspruit1
R 42,426
SavedSave
Please note that shipping and installation is not included.DAB centrifugal double impeller K pump 7.5kW – three phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller. As can been seen on data sheetCarbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal double impeller K pump 7.5kW – three phaseMaximum operating pressure: 12 bar (1200 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.Standard voltage: Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 2″Outlet: 1.1/4″
Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
7d
Mbombela / Nelspruit1
R 12,909
SavedSave
Please note that shipping and installation is not included.DAB centrifugal double impeller K pump 1.8kW – three phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal double impeller K pump 1.8kW – three phaseMaximum operating pressure: 6 bar (600 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.Standard voltage: Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 1.1/2″Outlet: 1″Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
7d
Mbombela / Nelspruit1
R 4,122
SavedSave
Please note that shipping and installation is not included.DAB centrifugal single impeller K pump 0.75kW – single phase centrifugal pump is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal single impeller K pump 0.75kW – single phase
Maximum operating pressure: 6 bar (600 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.
Standard voltage: Single-phase 220-240 VCONSTRUCTION FEATURES OF THE PUMP
Inlet: 1″
Outlet: 1″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
8d
Mbombela / Nelspruit1
R 19,395
SavedSave
Please note that shipping and installation is not included. DAB Centrifugal single impeller K pump 2.2kW – single phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB Centrifugal single impeller K pump 2.2kW – single phaseMaximum operating pressure: 6 bar (600 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.
Standard voltage: Single-phase 220-240 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 2 1/2″Outlet: 2″
Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
8d
Mbombela / NelspruitSave this search and get notified
when new items are posted!
