Please note that our Terms & Conditions and Privacy Notice are applicable.
On Promotion in Home & Garden
Some search tips we've found useful:
- Check the spelling of your search terms
- Use fewer or more general search terms
- Try browsing a category related to your search terms
Ads in other locations
1
R 1,700
NEGOTIABLE
SavedSave
KIC FRIDGE STILL IN GOOD CONDITION SELLING FOR 1700
6h
Witbank
1
R 1,400
SavedSave
Fairly New And Need To Sell It Fast Because Of Relocating
9h
VERIFIED
Pay & Ship
1
R 3,834.67
SavedSave
Please note that shipping and installation is not included.
Firstly the Multi-Jet brass hot water meter – 32mm. Measurement of
volume of cold or hot potable water consumption. Suitable for both
domestic and small business applications.
FEATURES
Approved to SANS1529 -1: 2019 Class B specifications. (SA 1566).For Horizontal installation.Clear, easily read, dry dial counter. Reads to 0.0002m3.Cold water meter working temperature ≤ 50°C.Hot water meter working temperature ≤ 90°C.The strainer is removable for maintenance in the eld.Working pressure 1600 kPa.Suitable for measuring potable water.Inlet and Outlet threads are compatible with ISO metric sizes.Dezincication Resistant Brass body (DZR).Less susceptible to damage caused by suspended solids.Pulse prepared – different settings available. (To be specified).Recalibrated possible in a SANAS-accredited verification laboratory.
Installation Instructions
Thank you for choosing The Water Company’s Multi-Jet brass hot water meter – 32mm.
This device has undergone thorough testing and verification at
Precision Meters’ SANAS Accredited Verification Laboratory, conducted by
a certified Verification Officer, to ensure it meets SANS 1529-1:2019
Class B specifications. It is supplied in full working order.
As a precision instrument, the water meter features exacting
tolerances between its moving parts and is designed exclusively for
measuring potable water. Exposure to grit, sand, or other suspended
solids can cause permanent damage to the meter. Such damage incurred
during installation is not covered by The Water Company warranty.To ensure proper installation, it is imperative that the installer
maintains cleanliness throughout the process. Thoroughly flush the
pipeline before installing the meter.
21h
Mbombela / Nelspruit
1
R 1,490.40
SavedSave
Please note that shipping and installation is not included.
Firstly the Multi-Jet brass hot water meter – 15mm. Measurement of
volume of cold or hot potable water consumption. Suitable for both
domestic and small business applications.
FEATURES
Approved to SANS1529 -1: 2019 Class B specifications. (SA 1566).For Horizontal installation.Clear, easily read, dry dial counter. Reads to 0.0002m3.Cold water meter working temperature ≤ 50°C.Hot water meter working temperature ≤ 90°C.The strainer is removable for maintenance in the eld.Working pressure 1600 kPa.Suitable for measuring potable water.Inlet and Outlet threads are compatible with ISO metric sizes.Dezincication Resistant Brass body (DZR).Less susceptible to damage caused by suspended solids.Pulse prepared – different settings available. (To be specified).Recalibrated possible in a SANAS-accredited verification laboratory.
Installation Instructions
Thank you for choosing The Water Company’s Multi-Jet brass hot water meter – 15mm.
In addition this device has undergone thorough testing and
verification at Precision Meters’ SANAS Accredited Verification
Laboratory, conducted by a certified Verification Officer, to ensure it
meets SANS 1529-1:2019 Class B specifications. It is supplied in full
working order.
As can be seen a precision instrument, the water meter features
exacting tolerances between its moving parts and is designed exclusively
for measuring potable water. Exposure to grit, sand, or other suspended
solids can cause permanent damage to the meter. Such damage incurred
during installation is not covered by The Water Company warranty.To ensure proper installation, it is imperative that the installer
maintains cleanliness throughout the process. Thoroughly flush the
pipeline before installing the meter.
21h
Mbombela / Nelspruit
1
R 3,632.85
SavedSave
Please note that shipping and installation is not included.
Firstly the Multi-Jet (Class C) polymer water meter – 40mm. Accurate
measurement of the volume of cold potable water consumption. Zone
metering and area monitoring.
FEATURES
Complies with SANS1529 -1: 2019 Class C specifications.Meter for horizontal installation.Pulse prepared.Clear, easily read, dry dial 6-digit counter.Sealed dry dial register.Working temperature between ≤ 50°C.Internal plus removable strainer. (2 strainers).Maximum working pressure 1600 kPa.Glass reinforced polymer body for maximum strength.Meter pressure tested to 4800 kPa.Magnetic drive, lower transmission resistance.A magnetic shield prevents external magnetic interference.Pulse prepared. A reed switch is an optional extra
Installation Instructions
Step 1: Protecting the Meter
Firstly ensure the Multi-Jet (Class C) polymer water meter – 40mm is
covered after installation to protect it from direct sunlight. This can
be done using a housing or meter box.
Step 2: Sizing
Afterwards ensure the water meter is properly sized according to the pipe size or flow rate.
Step 3: Flushing Pipework Before Installation
Flush all pipework to remove debris or sand, ensuring a clean pipeline.
Step 4: Meter Orientation
Install the meter horizontally with the dial face upright.
Step 5: Avoiding Pressure
Ensure no pressure is applied to the meter during installation from
misaligned pipes or excessive vibration, as this can cause damage.
Step 6: Fitting Installation
Avoid over-tightening fittings or using excessive sealing materials like tape, which can cause leaks.
Step 7: Thread Treatment
Do not use hemp on the inlet or outlet threads. Instead, use thread tape or PTFE tape, ideally with tail pieces.
Step 8: Soldering Precautions
Also avoid soldering near the meter, especially where brass fittings are involved, to prevent damage from heat.
Step 9: Water Type
Ensure the meter is used only for cold water applications and not in hot water pipelines.
Step 10: Appropriate Usage
Use the meter exclusively for clean potable water to avoid damage and inaccuracies.
Step 11: Handling Care
Handle the meter with care as it is a precision instrument. Do not drop it or damage the meter seal.
Step 12: Thread Fittings
Avoid using tapered thread fittings; tailpieces are recommended.
Step 13: Additional ProtectionInstall a strainer before the water meter to protect it from debris or sand.Conclusion:At this instant by following these steps, you will ensure optimal
meter performance and maintain compliance with warranty guidelines.
Evidently the Water Company will repair or replace defective meters at
their discretion. By and large proper installation is key to a
long-lasting, accurate water meter.
21h
Mbombela / Nelspruit
1
R 2,080.35
SavedSave
Please note that shipping and installation is not included.Whole house system – double
Firstly the whole house system is designed to filter out sediments and remove odor from water. This is achieved by the use of sediment filter and an activated carbon filter.
The water first flows through the sediment
filter to remover sediments such as mud, dust particles, rust, and any
suspended solids. The water then goes through the activated carbon block
filter to remove bad odors and improve the taste of the water. Finally,
the water will pass through the final polishing sediment filter to
ensure that there are no sediments left in the water so you can enjoy
clean filtered water.
The Whole house system – double will work
flawlessly with municipal water that has been tested and the system was
recommended for. The system will also work with rainwater.
Specifications
Housings: 20” BB HousingsStand: Steel Stand/Bracket – Painted In WhiteInlet/Outlet Size: 1”Filters: 20” BB PP Filters & 20” BB Activated Carbon Block FilterMax. Pressure: 5 BarMax. Flow: 2000 Liters Per HourRequired Feed Pressure: 2.5 BarDouble O-Ring SealNOTE: Because some images are for illustrative purposes only. Please
refer to the product title for reference. Please confirm stock
availability prior to purchase*
2d
Mbombela / Nelspruit
1
R 4,396.68
SavedSave
Please note that shipping and installation is not included.
Whole House 3 stage with 30W UV LightExcluding cartridgesThe function of the polypropylene sediment removal filter cartridge
filter is to separate substances or particles from the liquid. The
cartridge filter is a medium to filtrate substance that flows with
liquid. Cartridge filter in this project focuses on a water filtration
system that usually used at houses and small-scale industries. The
volume flow rate relates to the pressure of the water that flows through
the pipe system.
Cartridge filter function as a media that reduced pressure from the
water flow and call pressure drop. Sediment sand particles function as
particles that flow with the water and will filtrate with a cartridge
filter. Sediment sand makes contact on the surface of the cartridge
filter depend on the volume flow rate of water. This situation makes the
filtration system has different pressure on the entrance and the exit
of the cartridge housing. Different pressure call pressure drop
represents the pressure drop of the cartridge.
2d
Mbombela / Nelspruit
1
R 2,481.52
SavedSave
Please note that shipping and installation is not included.Function of 3 Stage 20″ BB on frame (Excluding cartridges):
The function of the 3 Stage 20″ BB on frame (Excluding cartridges).
Firstly the polypropylene sediment removal filter cartridge filter is to
separate substances or particles from the liquid. The cartridge filter
is a medium to filtrate substance that flows with liquid. Cartridge
filter in this project focuses on a water filtration system that usually
used at houses and small-scale industries.
The volume flow rate relates to the pressure of the water that flows
through the pipe system. Cartridge filter function as a media that
reduced pressure from the water flow and call pressure drop. Sediment
sand particles function as particles that flow with the water and will
filtrate with a cartridge filter.
Sediment sand makes contact on the surface of the cartridge filter
depend on the volume flow rate of water. This situation makes the
filtration system has different pressure on the entrance and the exit of
the cartridge housing. Different pressure call pressure drop represents
the pressure drop of the cartridge.
The pressure drop can relate to the volume flow rate and determining
the life span and maximum condition of the cartridge filter. The maximum
clogging condition happens because the pressure of the cartridge filter
does not increase anymore and the cartridge filter has fully clogged
with sediment sand.
The Whole house system is a simple way of removing unwanted particles from the water supply to your home.Household
drinking water treatment. The three-stage filtration system can
effectively improve the quality of household drinking water, remove
harmful substances such as silt, residual chlorine, heavy metals, etc.
in the water, and ensure the health of family members.
2d
Mbombela / Nelspruit
1
R 4,405.99
SavedSave
Please note that shipping and installation is not included.The new DAB Nova submersible pump 0.55kW were redesigned to mark the
occasion of forty years on the market and to make them even more
reliable, robust and ergonomic.
As has been noted high performance. NOVA and FEKA have professional
features such as the oil chamber triple seal and lubricated bearings.
Being that better protection against corrosion Motor in AISI 304
stainless steel and shaft in AISI 431 steel for better protection
against corrosion.
Technical Data
Operating range:
Flow rate up to 16 m3/h with head up to 10.2 meters
Liquid temperature range:
From 0 °C to +35 °C for domestic use. From 0 °C to +50 °C for other uses.
Output
1.1/4″ F
Pumped liquid:
Cesspool sewage water.
Max. immersion depth: 7 meters.
Maximum dry run time: 1 minute.
Protection class: IP 68.
Insulation class: F.
Free Passage: 10 mm
Most important the DAB Nova submersible pump 0.55kW line with open
impeller is suited to all clean and waste water with solids measuring up
to 10 mm. It can be used to empty tanks, vats or cisterns, drain
flooded basements, cellars and garages, and prevent flooding when
installed in rainwater wells.It can also be used as a portable pump in emergencies to drain water
out of flooded rooms. They can also be used for emptying tanks or
cisterns. The pumps are suitable for drainage of flooded basements,
cellars and garages or to prevent flooding when installed in rainwater
collector wells, which can also be used as a portable pump in emergency
situations to drain water from flooded premises.
2d
Mbombela / Nelspruit
1
R 32,907
SavedSave
Please note that shipping and installation is not included.DAB grinder FX submersible pump 1.5kW three phase with a shredder
designed for lifting and transferring wastewater in civil and commercial
environments. Grinder FX is certified EN 12050-1.
The presence of the shredder makes the pump suitable for systems with
small diameter pipes or those requiring high pressures. Shredder in
AISI 630 stainless steel. Ideal pump for replacements thanks to its
reduced dimensions and to both flanged and threaded delivery ports.
Technical Data of the DAB grinder FX submersible pump 1.5kW three phase
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
Construction features of the pump
Pump body and impeller in cast iron, shredder in AISI 630. Motor
shaft in AISI 304 stainless steel. Double mechanical seal in
SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid,
independent of the direction of rotation. Delivery port both flanged and
threaded.
Construction features of the motorSingle-phase asynchronous motor (MA / MNA versions) and three-phase
version motor (TNA versions). The rotor is mounted on lubricated
bearings. Continuous operation in S1 with the motor completely immersed.
Dry running for a maximum time of 10 minutes. Over-temperature sensors
in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase
versions with starter and capacitor in a separate panel, MA versions
with float for automatic operation. In the three-phase motors the
over-temperature sensor connection is responsibility of the user.
2d
Mbombela / Nelspruit
1
R 27,226
SavedSave
Please note that shipping and installation is not included.DAB grinder FX submersible pump 0.7kW three phase with a shredder
designed for lifting and transferring wastewater in civil and commercial
environments. Grinder FX is certified EN 12050-1.
The presence of the shredder makes the pump suitable for systems with
small diameter pipes or those requiring high pressures. Shredder in
AISI 630 stainless steel. Ideal pump for replacements thanks to its
reduced dimensions and to both flanged and threaded delivery ports.
Technical Data of the DAB grinder FX submersible pump 0.7kW three phase
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
Construction features of the pump
Pump body and impeller in cast iron, shredder in AISI 630. Motor
shaft in AISI 304 stainless steel. Double mechanical seal in
SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid,
independent of the direction of rotation. Delivery port both flanged and
threaded.
Construction features of the motorSingle-phase asynchronous motor (MA / MNA versions) and three-phase
version motor (TNA versions). The rotor is mounted on lubricated
bearings. Continuous operation in S1 with the motor completely immersed.
Dry running for a maximum time of 10 minutes. Over-temperature sensors
in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase
versions with starter and capacitor in a separate panel, MA versions
with float for automatic operation. In the three-phase motors the
over-temperature sensor connection is responsibility of the user.
2d
Mbombela / Nelspruit
1
R 34,823
SavedSave
Please note that shipping and installation is not included.DAB grinder FX submersible pump 1.5kW single phase with a shredder
designed for lifting and transferring wastewater in civil and commercial
environments. Grinder FX is certified EN 12050-1.
The presence of the shredder makes the pump suitable for systems with
small diameter pipes or those requiring high pressures. Shredder in
AISI 630 stainless steel. Ideal pump for replacements thanks to its
reduced dimensions and to both flanged and threaded delivery ports.
Technical Data of the DAB grinder FX submersible pump 1.5kW single phase
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
Construction features of the pump
Pump body and impeller in cast iron, shredder in AISI 630. Motor
shaft in AISI 304 stainless steel. Double mechanical seal in
SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid,
independent of the direction of rotation. Delivery port both flanged and
threaded.
Construction features of the motorSingle-phase asynchronous motor (MA / MNA versions) and three-phase
version motor (TNA versions). The rotor is mounted on lubricated
bearings. Continuous operation in S1 with the motor completely immersed.
Dry running for a maximum time of 10 minutes. Over-temperature sensors
in the motor windings with intervention threshold at +130°C.
Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase
versions with starter and capacitor in a separate panel, MA versions
with float for automatic operation. In the three-phase motors the
over-temperature sensor connection is responsibility of the user.
2d
Mbombela / Nelspruit
1
R 31,659.01
SavedSave
Please note that shipping and installation is not included.DAB grinder FX submersible pump 1.1kW single phase with a shredder
designed for lifting and transferring wastewater in civil and commercial
environments. Grinder FX is certified EN 12050-1.
The presence of the shredder makes the pump suitable for systems with
small diameter pipes or those requiring high pressures. Shredder in
AISI 630 stainless steel. Ideal pump for replacements thanks to its
reduced dimensions and to both flanged and threaded delivery ports.
Technical Data of the DAB grinder FX submersible pump 1.1kW single phase
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
Construction features of the pump
Pump body and impeller in cast iron, shredder in AISI 630. Motor
shaft in AISI 304 stainless steel. Double mechanical seal in
SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid,
independent of the direction of rotation. Delivery port both flanged and
threaded.
Construction features of the motor
Single-phase asynchronous motor (MA / MNA versions) and three-phase
version motor (TNA versions). The rotor is mounted on lubricated
bearings. Continuous operation in S1 with the motor completely immersed.
Dry running for a maximum time of 10 minutes. Over-temperature sensors
in the motor windings with intervention threshold at +130°C.
Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase
versions with starter and capacitor in a separate panel, MA versions
with float for automatic operation. In the three-phase motors the
over-temperature sensor connection is responsibility of the user.
2d
Mbombela / Nelspruit
1
R 12,693
SavedSave
Please note that shipping and installation is not included.Firstly Stainless steel Feka vs submersible pumps 1.2kW – three phase
with micro cast steel liquid vortex impeller, suitable for lifting
sewage and drain water in general containing solid matter with size up
to 50 mm.
Construction Features Of The Pump
AISI 304 stainless steel pump body, seal cover, motor cover, and cap
with handle insulating rubber coated. Micro cast steel impeller.
Insulating rubber covered handle. AISI 316 stainless steel motor shaft.
Double mechanical seal with interposed oil chamber (non-toxic oil) in
carbon-alumina on the motor side, and silicon carbide/silicon carbide on
the pump side. Mechanical seal: Silicon Carbide
Construction Features Of The Motor
Dry, asynchronous and waterproof motor, cooled by the pumped liquid.
Rotor running on permanently lubricated ball bearings, selected to
ensure low noise and durability. Over current protection as standard for
the single-phase version, optional for the three-phase version.
Permanently connected capacitor in the single-phase version.
Continuous duty with liquid temperature 35 °C and completely
submerged pump. The single-phase version can be supplied with float for
automatic operation. Mechanical seal: Carbon/Alumina
DAB Feka vs submersible pumps 1.2kW – three phase Number of poles: 2 Max starts/hour: 20
Operating range: From 0 to 32 m3/h with head up to 14 meters.
Pumped liquid: Sewage water and used water in general, non aggressive.
Free passage: 50 mm.
Liquid temperature range: From 0 °C to +35 °C for domestic use (EN 60335-2-41). From 0 °C to +50 °C for other uses.
Maximum ambient temperature for operation with motor above water: +40 °C
Maximum immersion depth: 7 meters.
Motor protection class: IP 68
Insulation class: F
Power Inputs: 3 x 400 V ~
Installation: Fixed or portable, vertical position
Power Cable: 10 meter H07RN-F, with plug for the single phase version.
Input Voltage A: 3.44
Output Voltage A: 22
HP: 1.6
2d
Mbombela / Nelspruit
1
R 7,880
SavedSave
Please note that shipping and installation is not included.Firstly Stainless steel DAB Feka vs submersible pumps 0.55kW – single
phase with micro cast steel liquid vortex impeller, suitable for
lifting sewage and drain water in general containing solid matter with
size up to 50 mm.
Construction Features Of The Pump
AISI 304 stainless steel pump body, seal cover, motor cover, and cap
with handle insulating rubber coated. Micro cast steel impeller.
Insulating rubber covered handle. AISI 316 stainless steel motor shaft.
Double mechanical seal with interposed oil chamber (non-toxic oil) in
carbon-alumina on the motor side, and silicon carbide/silicon carbide on
the pump side. Mechanical seal: Silicon Carbide
Construction Features Of The Motor
Dry, asynchronous and waterproof motor, cooled by the pumped liquid.
Rotor running on permanently lubricated ball bearings, selected to
ensure low noise and durability. Over current protection as standard for
the single-phase version, optional for the three-phase version.
Permanently connected capacitor in the single-phase version.
Continuous duty with liquid temperature 35 °C and completely
submerged pump. The single-phase version can be supplied with float for
automatic operation. Mechanical seal: Carbon/Alumina
DAB Feka vs submersible pumps 0.55kW – single phase Number of poles: 2 Max starts/hour: 20
Operating range: From 0 to 32 m3/h with head up to 14 meters.
Pumped liquid: Sewage water and used water in general, non aggressive.
Free passage: 50 mm.
Liquid temperature range: From 0 °C to +35 °C for domestic use (EN 60335-2-41). From 0 °C to +50 °C for other uses.
Maximum ambient temperature for operation with motor above water: +40 °C
Maximum immersion depth: 7 meters.
Motor protection class: IP 68
Insulation class: F
Power Inputs: 1 x 220 V -240 V – 50Hz single phase
Installation: Fixed or portable, vertical position
Power Cable: 10 meter H07RN-F, with plug for the single phase version.
Input Voltage A: 4.2
Output Voltage A: 20HP: 0.75
2d
Mbombela / Nelspruit
1
R 34,823
SavedSave
Please note that shipping and installation is not included.Firstly the DAB Feka FXV submersible pumps 2.2kW – three phase is a
submersible pump for draining sewage water in commercial building
service. It is certified for the European Union standard EN 12050-1
which applies to sewage lifting containing faecal material in buildings
and construction sites. Pump suitable for fixed installations with a
coupling device or mobile if placed directly on the bottom of the tank.
High-performance super vortex impeller with solid handling up to 50
mm or 60 mm. The DAB Feka FXV submersible pumps 2.2kW – three phase is
suitable for liquid with solids and long fibers in suspension. The
reduced overall dimensions and the outlet ports both flanged and
threaded make it ideal for replacements.
Designed for quick maintenance thanks to a constructive solution that
provides easy access to the main components of the pump. Automatic
versions with power up to 1,5 kW. ATEX version available for use in
potentially explosive environments. (ATEX certifications: II2G Ex db k
IIB T4 or IEC EX: Ex db IIB T4 Gb).
Technical Data
Flow rate minimum and maximum: 62,8 m3/h
Head up to: 19,6 m
Immersion dept (maximum): 20 m
Type of pumped liquid: Waters with filamentary bodies, paper or textile material in the presence of domestic or civil waste.
Free passage: 50 mm or 65 mm depending on the model
Supported liquid temperature (maximum and minimum): + 50°C (+ 60°C for a short period of time)
Flange and threaded: From 2″, DN50, DN65
Impeller type: Vortex
Start time (maximum) per hour: 20/h
Class of protection: IP 68
Motor insulation class: F
Single phase power input: 1x 220-240V 50Hz
Three phase power input: 3x 400V 50Hz / 3x 230V 50Hz only on request
Maximum dry run time: 10 min
Power cable (m) and plug: 10 m
Possible type of installation: mobile when on the ground, fixed with coupling
Certification: EN 12050-1 ATEX
Special versions on request: different cable lengths, different voltages and frequencies
2d
Mbombela / Nelspruit
1
R 32,907
SavedSave
Please note that shipping and installation is not included.Firstly the DAB Feka FXV submersible pumps 1.5kW – three phase is a
submersible pump for draining sewage water in commercial building
service. It is certified for the European Union standard EN 12050-1
which applies to sewage lifting containing faecal material in buildings
and construction sites. Pump suitable for fixed installations with a
coupling device or mobile if placed directly on the bottom of the tank.
High-performance super vortex impeller with solid handling up to 50
mm or 60 mm. The DAB Feka FXV submersible pumps 1.5kW – three phase is
suitable for liquid with solids and long fibers in suspension. The
reduced overall dimensions and the outlet ports both flanged and
threaded make it ideal for replacements.
Designed for quick maintenance thanks to a constructive solution that
provides easy access to the main components of the pump. Automatic
versions with power up to 1,5 kW. ATEX version available for use in
potentially explosive environments. (ATEX certifications: II2G Ex db k
IIB T4 or IEC EX: Ex db IIB T4 Gb).
Technical Data
Flow rate minimum and maximum: 62,8 m3/h
Head up to: 19,6 m
Immersion dept (maximum): 20 m
Type of pumped liquid: Waters with filamentary bodies, paper or textile material in the presence of domestic or civil waste.
Free passage: 50 mm or 65 mm depending on the model
Supported liquid temperature (maximum and minimum): + 50°C (+ 60°C for a short period of time)
Flange and threaded: From 2″, DN50, DN65
Impeller type: Vortex
Start time (maximum) per hour: 20/h
Class of protection: IP 68
Motor insulation class: F
Single phase power input: 1x 220-240V 50Hz
Three phase power input: 3x 400V 50Hz / 3x 230V 50Hz only on request
Maximum dry run time: 10 min
Power cable (m) and plug: 10 m
Possible type of installation: mobile when on the ground, fixed with coupling
Certification: EN 12050-1 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
2d
Mbombela / Nelspruit
1
R 34,823
SavedSave
Please note that shipping and installation is not included.Firstly the DAB Feka FXV submersible pumps 1.5kW – single phase is a
submersible pump for draining sewage water in commercial building
service. It is certified for the European Union standard EN 12050-1
which applies to sewage lifting containing faecal material in buildings
and construction sites. Pump suitable for fixed installations with a
coupling device or mobile if placed directly on the bottom of the tank.
High-performance super vortex impeller with solid handling up to 50
mm or 60 mm. The DAB Feka FXV submersible pumps 1.5kW – single phase is
suitable for liquid with solids and long fibers in suspension. The
reduced overall dimensions and the outlet ports both flanged and
threaded make it ideal for replacements.
Designed for quick maintenance thanks to a constructive solution that
provides easy access to the main components of the pump. Automatic
versions with power up to 1,5 kW. ATEX version available for use in
potentially explosive environments. (ATEX certifications: II2G Ex db k
IIB T4 or IEC EX: Ex db IIB T4 Gb).
Technical Data
Flow rate minimum and maximum: 62,8 m3/h
Head up to: 19,6 m
Immersion dept (maximum): 20 m
Type of pumped liquid: Waters with filamentary bodies, paper or textile material in the presence of domestic or civil waste.
Free passage: 50 mm or 65 mm depending on the model
Supported liquid temperature (maximum and minimum): + 50°C (+ 60°C for a short period of time)
Flange and threaded: From 2″, DN50, DN65
Impeller type: Vortex
Start time (maximum) per hour: 20/h
Class of protection: IP 68
Motor insulation class: F
Single phase power input: 1x 220-240V 50Hz
Three phase power input: 3x 400V 50Hz / 3x 230V 50Hz only on request
Maximum dry run time: 10 min
Power cable (m) and plug: 10 m
Possible type of installation: mobile when on the ground, fixed with coupling
Certification: EN 12050-1 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
2d
Mbombela / Nelspruit
1
R 10,625.31
SavedSave
Please note that shipping and installation is not included. Firstly Verty nova 0.4kW 400 M is a vertical delivery submersible
pump suitable for domestic applications like drainage or lifting water
form thanks or river. In the second place it may be used in automatic or
manual mode and it’s very easy to handle.
This time vertical delivery draining submersible pump is suitable for
domestic automatically operated fixed applications, for draining
basements and garages that are subject to flooding. Thanks to its
compact and easy to handle shape, and the built-in float, it is suitable
for particularly small draining wells (minimum 20×20 cm). It may also
be used as a portable pump for emergencies such as lifting water from
tanks or rivers, emptying swimming pools, fountains, excavations and
underpasses.
Hydro resistant techno polymer pump body, cover, and suction grid.
Stainless steel motor, roto shaft, and bolts and screws. Threefold seal
with interposed rings with oil pre chamber.
Submersible type continuous duty asynchronous motor. Starter enclosed
in airtight stainless steel casing, with an outer cover that protects
the wiring and the capacitor. Rotor running on permanently lubricated
ball bearings, oversized to ensure low noise and durability. Built-in
thermal amperometric protection and permanently connected capacitor.
Verty nova 0.4kW 400 M Clean water draining submersible pumps for domestic use with built in float.
Operating range: from 1 to 10m3/h with head up to 9 meters.
Pumped liquid: dirty water without fibers.
Liquid temperature range: from 0 °C to +35 °C for domestic use.
Outlet: vertical 1” ¼ F plus hose fitting.
Pump priming limit: 10-15 mm in manual operation.
Max. immersion depth: 7 meters.Power input: 1 x 230-240V
3d
Mbombela / Nelspruit
1
R 3,378
SavedSave
Please note that shipping and installation is not included.Firstly Verty nova 0.2kW 200 M is a vertical delivery submersible
pump suitable for domestic applications like drainage or lifting water
form thanks or river. In the second place it may be used in automatic or
manual mode and it’s very easy to handle.
This time vertical delivery draining submersible pump is suitable for
domestic automatically operated fixed applications, for draining
basements and garages that are subject to flooding. Thanks to its
compact and easy to handle shape, and the built-in float, it is suitable
for particularly small draining wells (minimum 20×20 cm). It may also
be used as a portable pump for emergencies such as lifting water from
tanks or rivers, emptying swimming pools, fountains, excavations and
underpasses.
Hydro resistant techno polymer pump body, cover, and suction grid.
Stainless steel motor, roto shaft, and bolts and screws. Threefold seal
with interposed rings with oil pre chamber.
Submersible type continuous duty asynchronous motor. Starter enclosed
in airtight stainless steel casing, with an outer cover that protects
the wiring and the capacitor. Rotor running on permanently lubricated
ball bearings, oversized to ensure low noise and durability. Built-in
thermal amperometric protection and permanently connected capacitor.
Verty nova 0.2kW 200 M Clean water draining submersible pumps for domestic use with built in float.
Operating range: from 1 to 10m3/h with head up to 9 meters.
Pumped liquid: dirty water without fibers.
Liquid temperature range: from 0 °C to +35 °C for domestic use.
Outlet: vertical 1” ¼ F plus hose fitting.
Pump priming limit: 10-15 mm in manual operation.
Max. immersion depth: 7 meters.Power input: 1 x 230 V
3d
Mbombela / NelspruitSuccessfully Added to List
View and manage your saved ads in your account.