Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Results for mechanical repair assistant job in General Worker Jobs in East London
SavedSave
We are looking for a workshop assistance for a vehicle repair workshop. The person must have some mechanical skills, working with basic tools, able to work on their own and part of a team. Stripping of damaged vehicle bumpers, grilles etc and other general workshop duties. Some training will be given. Position is in town/ CBD area. Whatts App ONLY, one page CV with photo/ Copy of ID to 084 66 00 586. This is a contract position.
14d
Ads in other locations
1
Our client in the Logistics Sector based in Port Elizabeth, is looking to employ a Field Service Technician / Fleet Maintenance Co-Ordinator.
Red seal qualified technicians / diesel mechanics secures.
An awesome career opportunity awaits.
Requirements:
Grade 12.Related qualification an advantage.2 to 5 years related experience.Have to be a red seal qualified technician / diesel mechanic.Able to apply basic Health and Safety procedures relevant to own work functions under direct supervision.Able to identify hazards and deal with it with direct instructions/guidance in place.Able to identify and select relevant material and equipment needed.Able to solve maintenance problems independently.Able to administer the administration control, record keeping and reporting of maintenance activities.Can make basic inferences from customer usage patterns.
Responsibilities:
Ensuring the fleet is maintained optimally and to ensure good customer service.Evaluate/check vehicles for general defects before doing any repairs.Compile technical reports on scope to repair required.List spare parts required to repair vehicle.Strip components of vehicles.Clean and assess parts for wear and damages.Assemble stripped down components with new and used parts.Identify systems on component failure, discuss with Team Leader and Workshop Foreman and record findings on the job card.List all task performed on the vehicle on the job card, the spares used, and the time taken to complete each task.Service and repair vehicle to OE specifications and schedules.Perform standby/breakdown after hour duty.Maintain acceptable productivity and efficiency levels.Monitor, train and guide repair shop assistants, semi-skilled artisans.Report unsafe working conditions/equipment to Team Leaders/Workshop Foreman.Ensure Standard Operating Procedures are adhered to.Assist in relevant operations/operational functions as required.Maintain professional conduct.Ensure dress code is in accordance with company Standard Operating Procedures.Maintain housekeeping standards daily.Ensure standards of Health and Safety are maintained.
Please note should you not receive a response within two weeks of applying please consider your application unsuccessful.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xNjY2ODkwNzQ/c291cmNlPWd1bXRyZWU=&jid=1482454&xid=166689074
6d
1
SavedSave
*Reference: 39032725*
Orion Engineered Carbons (NYSE: OEC) is a leading global supplier of carbon black, a solid form of carbon produced as powder or pellets. The material is made to customers exacting specifications for tires, coatings, ink, batteries, plastics and numerous other specialty, high-performance applications. Carbon black is used to tint, colorize, provide reinforcement, conduct electricity, increase durability, and add UV protection. Orion has innovation centers on three continents and 14 plants worldwide, offering the most diverse variety of production processes in the industry. The companys corporate lineage goes back more than 160 years to Germany, where it operates the worlds longest-running carbon black plant. Orion is a leading innovator, applying a deep understanding of customers needs to deliver sustainable solutions. For more information, please visit orioncarbons.com.
To install, maintain and repair mechanical, equipment. To assist with planning and communicate /report within maintenance team. Update computer systems (SAP). Must be familiar with requirements for safety systems on plant equipment and be able to maintain them in working condition. Detects and reports faulty equipment.
* *Maintenance Support Service*
* Inspect all plant equipment for wear or possible defects, execute repairs if necessary.
* Load job cards daily on faulty equipment after inspections.
* Lubricate equipment.
* Clean grease nipples and equipment after lubrication.
* Remove access grease from the equipment daily.
* Ensure that all rotating equipment is cleaned and kept in good painted condition.
* Maintain all equipment as per planned maintenance system, as well as requested maintenance or breakdowns.
* Update completed planned maintenance schedules on computer.
* Drive forklift to move equipment to workshop for maintenance.
* Maintenance includes:
- - change seals
- vee belts & couplings
- reactor sections
- filter bags & cages
- pillow - blocks
- taper lock
- parallel & hanger bearings
- rollers on conveyers
- Fit lubricating extension pipes
- filters & steam traps
- make gaskets for flanges
- overhaul machines.
* Do safety checks on all equipment.
* General housekeeping :
* Ensure that all bolts, nuts, gaskets, lagging, cladding, metal, welding rods and anything else is removed from the plant after the work is done.
* Construct / assemble new equipment.
* Install & commission new equipment.
* Upgrade/modify existing equipment.
* Minor gas or arc welding and plastic related welding.
* On a daily basis job cards must be updated to reflect the exact work done on the equipment.
* Close off the job cards that are completed daily.
* Maintain the computer maintenance system.
2. *Scheduled Maintenance*
* Perform preventive and corrective maintenance activities as per plant safety regulations, maintenance plans and procedures.
* Must be thoroughly familiar with safety requirements and installed safety systems
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzQ3NTUwX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1235092&xid=1555_47550
2y
1
SavedSave
EDUCATIONAL QUALIFICATION Qualified Electrical Trade / Millwright Trade Test CertificateKNOWLEDGE / EXPERIENCE REQUIRED & PHYSICAL DEMANDS: Minimum 5 years electrical maintenance experienceMinimum 3 years electrical project management experienceMinimum 5 years electrical maintenance experienceMinimum 3 years electrical project management experienceKEY PERFORMANCE AREAS: Installs and repairs electrical systems, apparatus, electrical and electronic components of industrial machinery and equipment, following electrical code, manuals, schematic diagrams, blueprints, and other specifications, using hand-tools, power tools, and electrical and electronic test equipment.Installs power supply wiring and conduit for newly installed machines and equipment, such as conveyors, Presses and Calenders.Connects power supply wires to machines and equipment, following manuals, schematic diagrams, and blueprints, using hand-tools, power tools, and test equipment.Diagnoses malfunctioning apparatus such as transformers, motors and lighting fixtures, using test equipment and replaces damaged or broken equipment and cables using hand-tools.Test malfunctioning machinery using test equipment.Replaces faulty electrical components such as relays, switches, motors, and position sensing devices, using hand-tools.Diagnoses and repairs or replaces faulty electronic components such as printed circuit boards.Replaces electric motor bearings.May plan layout of wiring and install wiring, conduit, and electrical apparatus in buildings.May diagnose and replace faulty mechanical, hydraulic, and pneumatic components of machines and equipment.Maintains appropriate service and repair records.Researches, purchases and inventories equipment parts, chemicals and supply.Responds to routine an emergency calls for repairs and serviceMake sure that all PM’s checks and Routine checks assigned to you are up to date.The electrical panels of the machinery assigned to you are your responsibility, so make sure that they are equip with drawings and in a good condition.May train and direct the work of other classified staff in the areaRepresent the Engineering group with leading the Gemba processAssist in the writing of specifications and repairs to new equipment.Troubleshoots repairs and maintains electrical distribution systems including electric motors, electric controls, fire alarms and clock systems.Installs, troubleshoots and repairs new equipment and systems, including programmable logic controllers.Fault finding on AC/DC Drives and PLC’s
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzcyNDM3X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1183778&xid=1109_72437
2y
Save this search and get notified
when new items are posted!