Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Results for mechanic jobs in General Worker Jobs in Eastern Cape
1
SavedSave
Applications are invited from suitably qualified candidates who meet the following job specifications. Please note that only candidates who meet the inherent requirements of the position will be considered and contacted.Responsibilities: • Process development (process flow chart) for new programs.• Use industrial engineering methods to determine the Cycle times.• Manufacture feasibility analysis (DFA/DFM) and PFMEA on new products.• Plant and process layout for new products and plant launches.• Perform Process and quality improvements.• Perform cost analysis of product and process alternatives (investments and assembly time).• Write process specifications and make recommendations regarding ergonomic improvements.• Write specifications for manufacturing equipment and make recommendations for equipment procurement.• Simulate continuous improvement process in plants (KAIZEN, DO IT) with the objective of MEQ.• Work with SD-Teams to complete product launches.• Monitor and improve 4 M’s of stable of production.• Establish solutions to any processing issues and stimulate TPM in new projects.• Develop and maintain process documents, including: PFMEA, Process Flow Chart, ODS, Process Parameter Sheets• Monitor and audit manufacturing best practices and standards in the plant.• Improvement strategies: Participate and/or lead activities for manufacturing footprint analysis, continuous improvement of new and/or ongoing manufacturing process and lean manufacturing implementation.• Wil be required to work shifts and/or Overtime if and when required.Requirements: • Degree or National Diploma in Engineering (mechanical or industrial).• 3-4 years minimum experience as a Manufacturing or Process Engineer.• OEM or Tier One automotive interiors work experience.• High volume automotive manufacturing engineering work experience.• Strong computer and manufacturing simulation skills.• JCMS/ Lean manufacturing.• Manufacturing exposure in Automotive Industry.• Plant Layout using AUTO CAD.• Equipment selection, purchasing and installation.• Experience in Lamination, Glue application / foaming will be an added advantage.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzQ5MjMzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1179817&xid=1108_49233
2y
1
SavedSave
Well established automotive company based in Sandton within the Audi Brand department, the successful incumbent will be responsible to improve the turnaround time on the repairing of complicated customer complaints and uplifting of the technical skills in the Dealer Network. To ultimately assist with the improvement on Customer satisfaction and reduction of repeat repairs.Job Description and Responsibilities:Plan, prepare and do technical Dealer analysisFlying nationally to repair complex problems to the correct safety and quality standards on vehicles at Audi Dealers.Performing root-cause analysis of complex vehicle problems and providing assistance in developing Dealer training content and material to address shortcomings.Planning and preparing Dealer analysis, identifying weak areas in the Audi Dealer Network on Technical issues and non-conformance to the Audi Service Core Process.Ensuring the most economic method of diagnosis and repair is available to the Audi Dealer Network.Assess training needs and recommend actions.Analysing technical skills gaps at the Dealer and conducting in-house training at Dealer level.Analysing tools and equipment status at Dealer level and recommending corrective actions.Reporting to Audi SA and Audi AG on the technical requirements for the Audi Dealer Network and recommend specific training programs to address the identified short comings.Up-skilling the Audi Dealer Network on vehicle diagnosis process.Developing and implementing a user-friendly feedback loop for guided fault finding telematic support for the Dealer NetworkLiaising between Audi SA, Company Group Technical Support Centre and Audi AG.Establish a working relationship with Technical Support Centre and Customer interaction Centre.Implement a process of identifying weak Dealers based on the information from TSC and CIC. Agree on the Dealers that need attention with TSC and CIC.Implement regular scheduled meetings with TSC / CIC to follow up on actions taken and agree on next actions.Together with TSC / CIC plan for and ensure that high profile customer cases are given priority.Providing support with the preparation of new model launch vehicles.Providing support with reference to the Repeat Repair reduction programme.Reporting to Audi AG / Audi SA Management.Implement systems of reporting to Audi AG / Audi SA Management on Dealer Network progress and status on actions conducted by the Flying Technician.Integrate the Regional After-Sales Manager in the Dealer visits to ensure that action plans are properly implemented and monitored.Education and ExperienceB.Sc. Electronics or equivalent 3-year tertiary qualification from a recognised tertiary institution.Minimum of 3 years post-graduate experience related to mechanical and electrical fault finding and development of technical, solutions.Previous experience in dealing with automotive product support issues of a technical nature Skills, Attributes & Other requirementsLiterature authoring skill in any Windo
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzE4MzM3MF9fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1777279&xid=1109_183370
17h
1
Established National Automotive Logistics Company, Is looking for a Technical Operations Manager to join their management team, and lead their operations at the East London site. Overview of the role: Responsible for managing and motivating all services’ staff and other personnel. Ensure delivery of a high level, quality service, and on time delivery of service vehicles to ensure growth and expansion to achieve targets. Minimum requirements:Electronics or Mechanical Trade Test / Degree or Diploma in Mechanical EngineeringMust have previous OEM production experience.5+ years working experience in the same or similar position.Ability to effectively communicate at all levels (both internal and external customers)Technical fitment knowledge required.Proven record of planning and executing projects related to operations.Effective management of staff (over 80 employees at 1 site)Effective utilisation of resources to run lean operations.Must have sound computer knowledge and applications at an advance level (Full MS Office Suite) Responsibilities:Responsible for overseeing the entire CMS Operation:Manage the contract with the client whilst maintaining profitability and productivity in the operationsPlan, implement and monitor annual budgets for the entire site, scheduling expenditures, analyzing and reporting on variances and taking appropriate corrective actions to compensate for variancesManagement of financial and administration requirementsEnsure SOPs as well as KPI measures are developed, implemented and adhered to optimize operational functioningCompile various reports including KPI reports monthly and submit these to relevant personnelEnsure CMS maintains sufficient resources to meet customer demandsEnsure campaigns and blocks, standardized fitments, INQA reworks and overall inventory (bubble) & WIP management targets are met strictly in accordance with customer scopeEnsure operations adhere to SHEQ and ISO standards, 5S and Gemba principles high priorityEnsure operations strive to fulfil BBBEE such as procurement and recruitment objectivesEnsure to manage CMS workshop (and in-plant areas), Equipment and Storage yard maintenance Promoting customer relations: Maintain good relationships with external and internal customers and handle any customer complaints according to procedure.Promote interdepartmental cooperation and synergies.Attend and participate in daily morning meetings at Plant level with customer management.Review customer service orders and inspect the quality of technician repairs before the release of vehicles.Develop, implement, and monitor guidelines for working with customers to ensure maximum customer satisfaction.To support Contracts Manager to grow Technical Portfolio, to have an entrepreneurial mindset to find new business and act swiftly on projects and spot opportunities. Manage all productive staff effectively and efficiently:Plan and adjust staff workloads and allocate daily tasks and activities to staff by assigning task
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzE3NzM2NF9fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1777550&xid=1108_177364
17h
1
SavedSave
Injection Mould Setter required for a reputable automotive manufacturing company based in Gqeberha, Eastern Cape
Requirements :
Technical tertiary training and/or experienceMinimum 2 years Injection Moulding machine setting experienceBe physically fit and willing to work shifts and/or overtimeElectrical, Mechanical, Hydraulic background beneficialGrade 12 with maths and science and/or equivalent
Key Performance areas :
Machine start-up, monitoring and continuous optimizationTool changesEnsure mould safetyOEE settings and input/optimizationWeekend shutdownMaintain exceptional housekeeping standardsKnowledge and adherence to H&S procedures and regulations
Should you wish to apply please email your CV through to Kerry O’Hagan at Kerry@profilepersonnel.co.za
Only shortlisted candidates will be contacted. Should you not receive a response within 14 days please consider your application unsuccessful. We will keep your CV on our database for any other relevant roles that may arise.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yNDU1NjE1MzI2P3NvdXJjZT1ndW10cmVl&jid=1615986&xid=2455615326
17h
1
SavedSave
Maintenance Artisans (Automotive Manufacturing) required for a large automotive manufacturing company based in East London.
General purpose: Plan and carry out daily mechanical and electrical maintenance to all plant machinery.
Responsibilities:
Ensuring 5S System and safe working standardsElectrical installations and PLC’sMechanical installationsEnsuring Preventative Maintenance is carried out according to schedules for both mechanical and electricalCarry out lubrication schedulesSpeedily rectify breakdowns and after hours call outs
Requirements:
N4 in Mechanical/Electrical Engineering – Trade Tested or similar5 years’ experience in a factory maintenance environmentComputer literacy is a mustAbility to learn fast and be independentExcellent leadership and organizational skillsExcellent verbal and written communication skillsExperience in Computerized Maintenance Management Systems preferredOwn transport is essential
Should you wish to apply please email your CV through to Kerry O’Hagan at Kerry@profilepersonnel.co.za
Only shortlisted candidates will be contacted. Should you not receive a response within 14 days please consider your application unsuccessful. We will keep your CV on our database for any other relevant roles that may arise.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xNzQ4NTg4MDA2P3NvdXJjZT1ndW10cmVl&jid=1476329&xid=1748588006
17h
1
SavedSave
Type of Position:
Applications are invited from suitably qualified & experienced employees to fill the above vacancy in Quality Assurance - QA Purchase Parts Department.
Job Description and Responsibilities
To ensure that the motor vehicle components perform consistently to specification throughout the life cycle of the component by:Initiating and managing the Qualifying Program for new part introduction.Implement continuous improvement by identifying the root cause for part deviation from specification and correct the deviation in all phases of the life cycle of the part.Testing and evaluating the performance of parts according to specification.Provide the required Technical Expertise for complete parts in respect of material and function.Initiate design improvements for complex problems on parts
Education and Experience
National Diploma /Degree in Mechanical Engineering /Electrical Engineering /Polymer /Quality)Minimum of 3 years relevant work experience in the manufacturing environment
Skills, Attributes & Other requirements
In-depth knowledge of applicable motor vehicle parts, their function, applicable specifications, part manufacturing processes and testing methods.Sound technical knowledge of motor vehicle components and systemsKnowledge and application of Quality Tools e.g., DOE, SPC, FMEA, 8DAbility to interpret drawings and related specifications.Strong analytical abilityComputer literate (Ms Office)Ability to effectively communicate and present to all levels within the company and externally. (Written and verbally)Ability to work independently.Be prepared to travel, local and overseas at short notice.Have a valid driver license.
Please forward CV and ALL supporting documentation to, Caree-Lee@profilepersonnel.co.za. Should you not hear from Profile Personnel within 14 days please consider your application unsuccessful for the vacancy. Please note all applications will automatically be added to our database for future vacancies
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yMjIxNTc5Mzk4P3NvdXJjZT1ndW10cmVl&jid=1695475&xid=2221579398
17h
1
SavedSave
DevOps Engineer required for leading automotive company based in East London.
You will be responsible for collaborating with Architects to design and implement DevOps practices across product delivery.
Responsibilities:
Implement and maintain CI/CD pipelines for product componentsCoordinate and perform deployments of product releases to various environments stagesInterface with various service teams in order to provision required infrastructure (databases, cloud resources etc.)Provision and maintain tools to help maintain and support the product (Automation, Logging, Monitoring tools etc.)Manual and Automated testing of product infrastructure and key component services to ensure overall product healthDevelop and maintain technical support documentation of the productSystem monitoring administration of the IBM WebSphere MQ/IIB and Axway CFT/SFTMonitoring of VM environments with several active REST-ServicesResponsible for troubleshooting and main contact partner for stakeholders
Requirements:
Development and DevOps Practices (Continuous Integration, Continuous Deployment)Minimum NQF 7 – BSC/BCom/BTech in Information Technology, Information Systems Engineering or Computer Science or relevant equivalent5+ years experience designing and building software applicationsProficiency with Java technologies and enterprise applicationsExperience working on complex software projects
You must be experienced in:
Java build automation tools (Maven, Gradle, Jenkins, IBM Websphere)Programming languages (Java / J2EE)Database technologies (PostgreSQL, IBM, DB2, etc.)Application monitoring tools (App Dynamics)API design using OpenAPI Standard 3.xContainer Orchestration: Kubernetes, Docker, Docker SwarmCloud technology: Deployment and Hosting of web services on cloudIT infrastructure (Virtual Machines, etc.)
Not essential but would be valuable:
Knowledge of Message processing and caching mechanism: Kafka, Rabbit MQ, RedisKnowledge of Monitoring Tools (Prometheus + Grafana)Knowledge of ELK (Elasticsearch, Logstash, Kibana)
Should you wish to apply please email your CV through to kerry@profilepersonnel.co.za
Only shortlisted candidates will be contacted.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yNDk4NDcyMzUwP3NvdXJjZT1ndW10cmVl&jid=1529253&xid=2498472350
17h
1
SavedSave
Business Development Manager required for a reputable industrial automation company based in East London , Eastern Cape
Requirements:
A tertiary qualification in electrical or mechanical engineering or similar qualification would be advantageousPrevious experience in an industrial automation environmentWilling and able to travel from time to time (Local & international)Consult with clients, vendors and personnel to discuss and formulate estimatesConfer with engineers, owners and subcontractors and adjustments to duration of projectsSet up cost monitoring and reporting systems and procedures
Duties and Responsibilities:
Lead and be responsible for satellite office of the company and to represent the company in selling, installing and supporting machinery.Interface with current and potential customers on a regular basis.Be involved in project planning and execution.Oversee work of technical installation teamVisit regular and prospective client businesses to establish and act on selling opportunitiesMonitor customers changing needs and competitor activitySupervise on-site employeesInstall electronic systems meeting standards and codes
Should you wish to apply please email your CV through to Kerry O’Hagan at Kerry@profilepersonnel.co.za
Only shortlisted candidates will be contacted. Should you not receive a response within 14 days please consider your application unsuccessful. We will keep your CV on our database for any other relevant roles that may arise.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yOTQ4OTgzMDM5P3NvdXJjZT1ndW10cmVl&jid=1755014&xid=2948983039
17h
1
SavedSave
Responsibilities:New Product Development & ProductionApproval (APQP) of new materials, components & systems in electrical commodity (wiring harnesses, electronic modules, motors, etc.)Provide Supplier Quality requirements for all new business sourcing decisions and business transfers (BTAB) affecting local suppliers to achieve company objectives in terms of quality, technology and priceKey member of sourcing team in support of Supplier Nomination / Selection processSupplier Quality performance monitoring and implementing continuous improvement initiatives
Drive rapid product issue resolution with suppliers for all supplier manufactured causesConduct regular supplier audits on quality management systems and processes to ensure supplier manufacturing controls consistently meet qualityrequirementsImplement product and/or process changes at suppliers, and ensure they are effectively managed / executed without disruption to supply while meeting company quality and engineering standards
Requirements:Mechanical, Quality or other related Engineering qualification with an additionalNQF level 4 minimum in Machining & ToolmakingMinimum 5 years’ experience in tool & die fabrication in the stampings commodity with a strong desire and/or exposure in the manufacturing qualitysystemsMinimum 10 years’ experience in automotive manufacturing process and component developmentExtensive knowledge of Quality Management Systems such as IATF16949,ISO9001, VDA6.3, etc.Proven Manufacturing Quality Systems knowledge including lean manufacturing conceptsThorough understanding of Process Failure Mode & Effects AnalysisKnowledge in automotive supplier manufacturing processes and controlsThorough understanding of Advanced Product Quality Planning (APQP) including detailed knowledge of Production Part Approval Process (PPAP) for automotive components and systemsWorking knowledge of Geometric Dimensioning and Tolerancing (GD&T)
Requirements:English oral and written communication skillsAbility to confidentially present to large forums and in front of Senior Leadership of the company and at the supplier baseStrong negotiation skillsAbility to influence others to gain cooperation and ability to deal with ambiguityInterpersonal savvyLearning on the flyDrive for results, high degree of planning, creative ability and disciplineStrong strategic agilityGood technical knowledge in automotive electrical commodity, systems and componentsHighly analytical, able to conduct root cause analysis and apply problem solving techniquesGood Problem Solving skills (8D, 5 Why’s, Ishakawa , Red X, etc.)Extensive knowledge on manufacturing techniques and processes used in manufacturing electrical compone...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xNDkzMjk2NDM2P3NvdXJjZT1ndW10cmVl&jid=1310497&xid=1493296436
17h
1
Job Description and Responsibilities:Design and install new plant concepts by following engineering principles, creating 3D and 2D CAD models, raising enquiry requests, conducting site meetings and selecting preferred suppliers.Running, monitoring and reporting on installation commissioning and report final sign-off to Management.Carry out maintenance on existing plant and equipment by following a preventative maintenance system.Procure the required components and equipment from external suppliers in accordance with the standard company purchasing system.Analyse failed plant and equipment for reasons for failure, and recommend and implement new processes and procedures in order to prevent such failures from reoccurring.Provide input into Financial Planning Rounds for CAPEX expenditure.Comply with and implement the statutory legal, safety and environmental requirements as applicable to the engineering test facility.Review power and water usage of the facility, and provide input into methods, processes and procedures to reduce water and energy consumption.Implement and co-ordinate the annual IS09001 calibration and certification activities for the engineering test facility.Keep the faculties up to current company Group standards.Maintain a detailed record of the facility by means of drawing records, CAD models and equipment documentation.Train fellow engineers in the use and operation of the engineering test facility.Education and Experience:Have a minimum of Bachelor of Science Degree in Mechanical Engineering.At least 5 years’ experience in the development and maintenance of facilities, control systems and equipment.A minimum of 3 years as a Senior Engineer performing design and Test engineering functions.
Skills, Attributes & Other requirements:In-depth knowledge of general mechanical engineering concepts with specific focus on Heating, Ventilation and Air-conditioning systems, mechanical equipment design and fabrication, heat transfer, instrumentation systems, software control and electrical power systems.
Insight and knowledge into technical engineering concepts.Specialized computer literacy with specific reference to 3D-CAD competence.Excellent report writing and presentation ability.Human relations (negotiation and patience).Innovation when faced with resource limitations.Knowledge of corporate procurement and Capex approval systems.Ability to solve complex mechanical engineering problems.Ability to plan and execute projects.Ability to identify risks, analyse them and setup planning to minimize risk.Ability to monitor, follow-up the project progress, to identify major project issues, and to escalate when necessary
Please forward CV and ALL supporting docum...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zODQyODM0ODg1P3NvdXJjZT1ndW10cmVl&jid=1294690&xid=3842834885
17h
1
SavedSave
Technical Product Manager required for a leading automotive company based in East LondonJob Description The Technical Product Manager builds and maintains relationships with product cluster and business unit leads as well as developing a deep understanding of product requirements and needs. Strategic and tactical management of related products and all technical related deliverables in interaction with Product Cluster Lead, Technical Tool Owner (TTO) and product teams. The Technical Product Manager reports to the IT manager and is the point of contact for technical escalations and operational topics.All activities are to be performed in compliance to the Company’s Integrity & Anti Bribery codes, Conflict of interest policy & S.H.E.Q. requirement and is to perform delegated S.H.E.Q. tasks and duties and to is to report deviations.Qualification and Experience ESSENTIAL NQF 7 - Bachelors Degree/Advanced Diploma, Computer Science, Business Informatics, Business Administration, Industrial/Mechanical Engineering, Supply Chain or similar qualifications within the automotive industry3-5 years technical product leadership in cross functional or international project teams; covering multiple products in a specific business unit domainMinimum 5 years practical experience working in complex software engineering or full product lifecycle environments; working in international, cross-functional/matrix and distributed project teams.SAP experience and knowledge of logistical processesJob RequirementsStrong personal responsibility, willingness to perform, independence and results orientation.Extensive SAP knowledge and experienceKnowledge of the agile SAFe framework and openness to new working models, and in most of all Empowerment, Co-Creation and Agility.Identifying innovation technological trends in the market and opportunities that would support business unit/IT transformational objectives.Experience with cross-functional teams and agile working using DevOpsmethodologiesExperience in leadership and cooperation in international, cross-functional/matrix and distributed project teamsKnowledge of modern system “AR, AI, IoT, RPA, Mobile, and API” and working with Enterprise & Solution ArchitectsOutputs Alignment on Product strategy; Timeline Planning for Major Projects / Activities; Defining strategy and relevant period for system performance management activities (such as archiving etc.)Budgeting per Product Cluster per Supplier / Fulfillment PartnerService level management for products according to service agreements with product teams; escalation management of productsEnsuring proper delivery of projects within agreed project budget and timelinesProper demand management and tracking of new requests within product team, overview of capacity and assignments within the product team.Must understand and have an overview of capacity and workload for product team.Monitoring the readiness of critical/major incidents feedback in respective forum(s); decision on what is
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzE3Njg2Ml9fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1775754&xid=1108_176862
17h
1
SavedSave
QUALIFIED MOTOR MECHANIC/EAST LONDON
Our client is seeking a qualified and experience Motor Mechanic to join their team. The ideal Candidate will be responsible for diagnosing, repairing and maintaining vehicles to ensure optimal performance and safety. High-quality service is key.
Min. Requirements
Trade qualification as a Motor Mechanic is non-negotiable (Copy to be submitted with application)
Minimum of 3 years’ experience working as a motor mechanic
Strong diagnostic and problem-solving skills with the ability to troubleshoot complex mechanical and electrical issues
Proficiency in using diagnostic equipment, hand and power tools
Excellent mechanical aptitude and attention to detail
Responsibilities:
Perform routine maintenance services on vehicles
Diagnose mechanical and electrical problems using diagnostic equipment and troubleshooting techniques
Conduct thorough inspections of vehicles to identify issues and determine the appropriate repair solutions
Repair and replace defective parts/components, such as engines, transmissions, brakes, steering systems etc.
Perform engine tune-ups and other advanced repair services needed
Maintain accurate records of work performed, including parts used, labour hours and diagnostic findings.
Adhere to safety protocols and procedures
Provide excellent customer service
The successful Candidate will,
Have the ability to work independently and as part of a team in a fast-paced environment
Be flexible, at times overtime may be required
Have strong communication skills
Have the ability to lift heavy objects and stand for extended periods
Salary: Market related + incentives
Application Process: Online applications will receive preference, https://www.dittojobs.com/jobs/view/1728496810 ensure you upload a head and shoulder photo, alternatively e-mail CV with Trade Qualification, references, valid driver’s license and a recent head and shoulders photo to solutions@workafrica.co.za, ensure you use QUALIFIED MOTOR MECHANIC as a reference in the subject field. Please deem your application as unsuccessful if you receive no feedback after 3 weeksJob Reference #: QUALIFIEDMECHANICConsultant Name: Claire OReilly
18h
1
SavedSave
Our client in the Eastern Cape is seeking a project planning engineer with at least 5 years’ experience in industrial scale ‘site work’ projects. You will need a mechanical engineering qualification, excellent planning ability, leadership qualities and a strong sense of accountability in delivering quality projects on budget, on schedule and without compromising Safelty, Health and Environment.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS80MTA1ODAyMjkyP3NvdXJjZT1ndW10cmVl&jid=1180173&xid=4105802292
18h
1
EE Manufacturing Millwright (Siemens & Allen Bradley PLC), Gqeberha - Port Elizabeth , R35 - 40k + Penson + Medical + Housing All + 13th Cheque
Trade Test - MillwrightA minimum of 3 years working experience in a Manufacturing Industry (Production environment).PLC fault finding ( Siemens & Allen Bradley)Working experience in 220V and 380V maintenance / electrical panels and control circuits.Competent to work on both HT and LT electricalExcellent communication skills with all levels.Interface professionally with all levels of employees.Computer Literate in MS Office andStrong interpersonal skills, objective and analytical
· To manage by planning, organising, controlling, within company policy to achieve maximum production output.
To maintain the electrical / electronic equipment on the premises in such a way as to ensure the minimum downtime
DUTIES
Oversee and motivate the workforce to achieve the best utilisation and efficiency of the plant and materials and thereby produce only products of the best quality.To ensure proper raw material control and monitoring and thereby achieve the most economical usage throughout the production process.Ensure that machines are in working order and preventative maintenance is done to avoid loss of time.Effective Electrical and Mechanical Maintenance on all sections and divisions.Maintain all electrical / electronic equipment to the highest working and safety standards.
Responsible for the maintenance of the curing equipment.Ensure the minimum downtime as a result of electrical breakdowns.Fault finding.Ensure production efficiency and maintain high quality standards.Control maintenance stores and related purchasing.Responsible for the ordering and receipting of raw materials, electrical spares and equipment.Monitor machine settings to avoid raw material losses.Responsible for the provision of accurate daily production statistics.Ensure that the planned maintenance system is maintained.Responsible for the accuracy of daily labour hours and ensure that the company abides by the requirements of the Department of Manpower.Ensure that all the requirements of the OHS Act are conformedAbide by Company Safety, Personnel and Operational Policies as amended from time to time.
Abide by Company Safety, Personnel and Operational policies...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yMzcyODI0MzM/c291cmNlPWd1bXRyZWU=&jid=1664920&xid=237282433
18h
1
SavedSave
Duties and Responsibilities:
Lead and manage the maintenance department, ensuring smooth and efficient operationsDevelop and implement preventative maintenance and continuous improvement programs to minimize downtime and optimize equipment performanceMaintain OEE on all equipment in line with company specificationsCoordinate and supervise maintenance activities, including routine inspections, repairs, and equipment overhaulsProvide technical expertise and guidance to the maintenance team, troubleshooting complex issues as they ariseMonitor and maintain inventory of spare parts, ensuring availability for timely repairs and replacementsManagement of contractorsEnsure that the maintenance function operates in accordance with the relevant legislation, including but not limited to OHS Act and By-Laws. Ensure adherence with all health, safety and environmental policies and procedures to ensure the safety and wellbeing of staff and visitorsKeep maintenance logs and report on daily activitiesInspect building structures to determine the need for repairs or renovations. Oversee building projects and renovationsReview utility consumption and strive to minimize costsEnsuring that facilities meet government regulations, health and security standards and energy efficiency requirements.Identification of training needs for subordinates to aid achieving objectives
Qualification and Experience:
A Matric CertificateDiploma/Degree in Mechanical/Electrical Engineering or equivalent10+ years working experience in plant maintenance, preferably in the Automotive industry, with 3 years in a managerial position
Knowledge, Skills and Abilities:
Experience in planning maintenance operationsStrong knowledge of engineering concepts, including electrical, hydraulics and mechanical systemsStrong knowledge of tooling, equipment, engineering specifications, and cost reduction methods in automotive applications·Working knowledge of the IATF 16949, ISO45001 and ISO14001 standardsSound knowledge of the OHS ActProblem-solving and analytical SkillsPlanning and Organisational SkillsKnowledge of facilities managementProficiency in MS Office applicationsExcellent verbal and written communications skillsKnowledge of ERP systemsAttention to detailfAbility to handle multiple tasks in a fast-paced, team-oriented and multi-cultural environmentGood interpersonal skillsGood presentation skills
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS85NDYxNTA5MDU/c291cmNlPWd1bXRyZWU=&jid=1677164&xid=946150905
18h
1
SavedSave
Our client currently has a vacancy for the above position and wish to invite suitably qualified applicants to submit their details for our consideration.
Ideally the successful incumbent should have
Matric, grade 12 or equivalent qualification together with a minimum of 2 years’ experience in the repairing of digital and /or RF equipment to component level in technical repairs;Computer Literacy with at least the ability to work on Word and Excel in the Microsoft Office suite;A working knowledge and understanding of Application Software, Barcode Label Printing software and WLAN;Familiarity with Microsoft Windows operating systemsSMD component soldering skillsA good team player with above average communication skills both telephonically and in person.Proven experience in successfully interacting with customers;The ability to handle multiple responsibilities at the same time;Self-driven and enthusiastic with a strong customer service orientation;English literacy and numeracy of at least a Grade 12 level;Ability to handle all repairs according to strict deadlines;Willingness to travel for work as and when required;Professional and presentable appearance; andValid Driver’s License
The successful incumbent, will report to the Technical Manager and the responsibilities of the position include:
Perform electronic and mechanical repairs to productsProvide consultation support for installationsUndertake installations when requiredMember of the Workshop Team to provide post – sale support to company staff, business partners and end-usersMinimum 2 years repairing digital and /or RF equipment to component levelSMD component soldering skillsPersonal computer, standard office equipmentMultiple and changeable prioritiesOccasional stressful customer interfaceGood verbal and written English skillsStrong telephone skills and courteous telephone mannerEffective and tactful communication with customers, sales and other departmentsFamiliarity with Microsoft Windows operating systemsRepairs in a timely, neat and accurate manner of all defective hardware sent to the workshop by customersConfigures and test sales demo systems per demo request instructionsPerforms occasional service calls at customers locationsComplete all required documentation in accurate and legible fashionResponsible for good housekeeping and safety practicesA person who can work on his/her own with minimum supervision
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yMzAyOTYxMTg5P3NvdXJjZT1ndW10cmVl&jid=1719463&xid=2302961189
18h
1
SavedSave
We have a vacancy for a Motor Vehicle Technician within a vehicle dealership in Mpumalanga
Duties: General Service and maintenance of vehicles. Diagnostics and fault finding, repairs and testing of vehicles booked into workshop
Must have 4 - 5 years experience as technician within a vehicle dealershipQualified as Motor Mechanic with Trade CertificateMechanical engineering certificate would be beneficialExperience working within a corporate vehicle dealershipValid SA drivers license and clear criminal recordSolid track record and referencesMust have Renualt Co Tech qualificationMust have 4 - 5 years experience as technicain within a vehicle dealershipQualified as Motor Mechanic with Trade CertificateMechanical engineering certificate would be beneficialExperience working within a corporate vehicle dealershipValid SA drivers license and clear criminal recordSolid track record and referencesMust have Renualt Co Tech qualification
Basic plus incentives
Please email CV to charne@firstdegreerecruitment.co.za
https://www.ditto.jobs/job/gumtree/2629398104?source=gumtree
18h
1
SavedSave
Vehicle Technician and Master Renault Technician Witbank
We have a vacancy for a Motor Vehicle Technician with a Vehicle dealership in Witbank.
Duties: General Service and maintenance of vehicles, Diagnostics and fault finding, Repairs and testing of vehicles booked into workshop
Requirements:
Qualified as Motor Mechanic with a Trade certificateMechanical engineering certificate would be beneficialMust have 4 to 5 years’ experience as technician with a Vehicle DealershipExperience working within a corporate vehicle dealershipValid SA Driver’s License and Clear criminal recordSolid track record and references
Basic salary plus incentives.
Send cv to candice@firstdegreerecruitment.co.za
https://www.ditto.jobs/job/gumtree/3976026646?source=gumtree
18h
1
Our client in the FMCG sector, based in Humansdorp, is currently looking to employ an experienced Maintenance Technician (Concentrated Products). (EE)
An awesome career opportunity awaits.
Requirements:
The successful candidate will either be a qualified millwright or electrician although other suitably qualified candidates will also be considered.Preferred candidates will have a minimum of 3 years’ experience gained in automated food or beverages manufacturing environment.Previous knowledge and experience of evaporators, sprays dryers, cheese, butter, and other food processing equipment will be advantageous.
Reporting line:
This position will report to the Concentrated Products Maintenance Specialist.
Responsibilities and expectations but not limited to:
The successful candidate will be required to perform scheduled and planned preventative maintenance in a Dairy plant environment i.e., Powder plant, Cheese production, and Butter plant.Do mechanical, electrical fault finding and repair of equipment to standard.Maintenance work and projects need to be done according to time frame and specification. Overtime and standby need to be worked as required.This position also requires of the candidate to work shifts.
Please note should you not receive a response within two weeks of applying please consider your application unsuccessful.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zMTcyNzAzMTMyP3NvdXJjZT1ndW10cmVl&jid=1489636&xid=3172703132
18h
1
SavedSave
TOP JOB ALERT - MANUFACTURING
Our client in the Automotive Sector, based in Port Elizabeth is currently looking to employ a experienced QSHER Manager.
An awesome career opportunity awaits.
Job Purpose:
To ensure that the quality, environmental and Health and safety management systems are maintained by making use of available resources. The role has responsibility for Quality, Safety, Health, Environment and Risk management.
Requirements:
Grade 12 with a recognized Qsher systems related and tertiary technical qualification.Important that the person has TS16949 and Ford Q1-2002 experience.Quality and Mechanical Engineering qualifications preferred.Senior management experience in a similar position in the automotive industry.Computer literate with extensive to MS-Office and Lotus Notes.
Responsibilities:
Manufacturing Inspection.Bought-out Material and components.Quality Assurance system.Control in using the S.P.C toolWarranty Claims.QSHER Budget.Management of the Employees.Safety, Health, Environment and Risk Management.
Please note should you not receive a response within two weeks of applying please consider your application unsuccessful.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS82MTc3ODY3NjY/c291cmNlPWd1bXRyZWU=&jid=1417156&xid=617786766
18h
Save this search and get notified
when new items are posted!
