Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Results for cnc job in Engineering & Architecture jobs in West Rand
1
SavedSave
Dynamic well established growing Company based on the West Rand, requires a Qualified Tool Die and Jig Maker. *MUST BE TRADE TESTED AND QUALIFIED.*
Experienced within the Steel manufacturing or Automotive industry.
Minimum of 10 years solid experience.
Will be responsible and handle the following:
* Program CNC, milling, turning and wire cutting machines, using Edge Cam.
* Operate CNC , Milling and wire cutting machines.
* Assist with Design and press and cast tooling.
* Commission dies and Press Tooling repaired or manufactured.
* Handle maintenance and repairs to single and progressive eccentric press tooling, to ensure
functionality and quality reqwuirements are achieved.
* Assist with creating of preventative maintenance schedules etc.
* Handle first line maintenance to machines.
* Troubleshoot and resolve problems should they arise.
* Must beable to prioritise and work under pressure.
Qualified Trade Tested Tool Jig and Die Maker (Toolmaker).
Minimum of 10 years experience within either the STEEL MANUFACTURING OR AUTOMOTIVE INDUSTRY.
Computer literate - including the use of SolidWorks.
R600K pa Negotiable.
Qualified Trade Tested Tool Jig and Die Maker (Toolmaker).
Minimum of 10 years experience within either the STEEL MANUFACTURING OR AUTOMOTIVE INDUSTRY.
Computer literate - including the use of SolidWorks.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1Xzk5OTFfXzQ5Nz91dG1fc291cmNlPWd1bXRyZWUmdXRtX21lZGl1bT1mZWVkJmtleXdvcmQ9&jid=1139562&xid=1555_9991
2y
Ads in other locations
Well established Manufacturing company based on the East Rand has an urgent vacancy for a CNC Lathe Programmer Supervisor with Edgecam experience.The main objective of the CNC Programmer is to fully optimize the functionality of the CNC Machines and to ensure that every product meets the highest quality and efficiency standards. The CNC Programmer, using Edgecam software, must have the ability to perform own set ups - and experience with adjusting the CNC programs whilst utilizing excellent manual programming skills to run the programs which have been created on the applicable CNC machines to produce high quality flanges and fittings.
Qualifying Experience:
Matric with MathematicsRelevant tertiary qualification (N3 or higher)Trade Test CertificateIdeally minimum 5 years’ Programming experience in a manufacturing/engineering/ production/turning environment.Be fully competent and able to program with Edgecam (Turning)Be fully competent and able to program with G-CodesCNC Tooling Knowledge inclusive of Speeds and FeedsThorough knowledge of precision measuring equipment and ability to use it.Comprehensive understanding of different material grades and characteristics.Traceable references and minimum 3years working experience in this position.Working knowledge of OHSAProficient computer skills (MS Office)Valid Driver’s license and own reliable transportProgram and setup following machines:
Hyundai Kia CNC Lathe Skt 21 with C/CSeiki Hi Turner 21 CNC Lathe with C/CGeorge Fischer CNC Lathe
RESPONSIBILITIES AND SKILLS:
Review and utilize existing programs and create new CNC programs in Edgecam.Reading and interpreting technical drawings, create program, to set up the CNC machines as per drawings.Analyse job orders, drawings specifications and design data to calculate dimensions, tool selections, machine speeds and feed rates.Creating, optimizing, and troubleshooting machine programs, ensuring that each job runs seamlessly.Designing and manufacturing of Jigs and special tooling.Planning and prioritizing jobs and completing urgent/critical jobs as operational requirements demand.Maintain continuity between workstations by communicating requirements and documenting irregularities as needed.Knowledge of required tooling required to cut particular materials and program machines accordingly with minimal downtime and minimal waste.Running of tool orders and stock control.Setting up machines (, including jaws, tools, jigs, stops, offsets) / adjusting machine settings to the desired product specifications using FANUC
During the Set- Up of Jobs, ensure correct and efficient Job card time capturing for costing.Direct, guide and mentor staff as required, assist machine operators on technical issues and planning of jobs.Monitor quality, accuracy and efficiency of teams work in terms of finished parts and tools and report any issues or possible improvements required.Train on boarding employees to operate CNC machinery and equipment.Work clo
SECTOR: Engineering and Technical
Job Reference #: JHB000349/AH
1d
Production Machining client based in Germiston is seeking a young male to fill the CNC Programmer (with Mastercam) vacancy.Someone who can program directly off a drawing. This individual must be happy to operate machines, when all programming and setting work is done. Will report directly to the Workshop Manager and assist him with running the workshop more efficiently. We need someone young and dynamic, who is willing to work hard and learn every day.
PLEASE ONLY apply if you meet all of the below requirements.
Minimum Requirements:
MatricRelevant Technical QualificationMastercam is a MUSTMinimum 2 years experience programming Milling and Lath machines using MastercamFanuc controls - MUSTFluent in Afrikaans & EnglishValid drivers licenseOwn transportKindly consider your application unsuccessful if you do not hear from us within 2 weeks
SECTOR: Engineering and Technical
Job Reference #: JHB000350/AH
1d
SavedSave
Client based on the East Rand has a vacancy for a Machine Tool Technician with Millwright Trade Test - MUST
come from Machine Tool industry
Trade Tested MillwrightMore than 4 years experience as Technician within the Machine Tool industrySolid Mechanical and Electrical experienceValid drivers licenseOwn vehicleExperience on various machinery i.e. Hand Held Lasers, XS Fiber Laser & Tube & Sheet Cutting Machines, CNC Plasma Cutting Machines, Milling Machines, CNC Milling Machines etc.Prepared to do field service duties and repairs on client sitesONLY apply if you meet ALL of the above requirements
Please consider your application unsuccessful if you do not hear from us within 2 weeks.
SECTOR: Engineering and Technical
Job Reference #: JHB000347/AH
2d
SavedSave
Plastic Engineering client based in Lanseria is seeking a young, dynamic and skilled
Edgecam Milling Programmer
to join their team. This position will involve generating CNC toolpaths for milling machines using Edgecam CAD/CAM software and the ideal candidate must have AutoCAD / Autodesk Inventor experience for model design’s which will be imported into Edgecam for toolpath generation. Please find the specific details and requirements for this role below:
Qualifications and Requirements:
3-5 years experience in Edgecam Programming on CNC Milling machines
3-5 years experience in AutoCAD / Autodesk Inventor for Milling operations
Strong attention to detail and problem-solving skills
Willingness to work flexible hours, including overtime when necessary
Ability to work in a fast-paced and dynamic manufacturing environment
Eagerness to learn and adapt to new technologies and processes
Key Responsibilities:
Create and modify CNC programs using Edgecam software
Work with AutoCAD / Autodesk Inventor for model design
Collaborate with the production team to ensure efficient manufacturing processes
Troubleshoot and resolve programming and machining issues as they arise
Maintain and update CNC programs as needed for process improvements
Comply with safety and quality standards
ONLY apply if you meet ALL the requirements
Please consider your application unsuccessful if you do not hear from us within 14 days
SECTOR: Engineering and Technical
Job Reference #: JHB000343/AH
2d
1
SavedSave
My moulding client is looking for a CNC Technician with Millwright experience
Must have 5 years of working experience in CNC MachinesPreferably with Okuma, Doosan, Fanuc and Mazak ControlsMust be willing to work late on breakdowns if needed, respond to callouts and work over weekendsKnowledge of high voltage switching will be an advantage
NB Applicants - Please Note:
We use Ditto to track and manage applications and can only accept online applications. If you are unable to apply through the link provided, please upload your CV to our website www.cfsrecruitment.co.za under VACANCIES. If the vacancy doesnt appear on the website, the position is no longer available.
The advertised salary range is merely a guideline in terms of the level of candidates required and it remains the prerogative of our client to offer a candidate any market-related salary in line with qualifications, skills, and level of experience.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xMDEyMDc0NjE1P3NvdXJjZT1ndW10cmVl&jid=1298965&xid=1012074615
2d
1
SavedSave
My Engineering client in Germiston is looking for a Qualified Millwright
Minimum Requirements:
Qualified Millwright with trade test papers5 years of experience with CNC machines preferable with Okuma, Doosan, Fanuc and Mazak controlsKnowledge of high voltage switching will be an advantageWilling to work late on breakdowns if needed, respond to callouts and work over weekends.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zODAwOTQyMDYyP3NvdXJjZT1ndW10cmVl&jid=1260942&xid=3800942062
2d
1
SavedSave
*Reference: JHB000553-J-1*
Our Client in the Automotive Industry recruit 10 x Instrumentation Technicians, this position require the service of an individual to do maintenance installations on hydraulic presses , Industrial Robots ,CNC Machines , Spot Welding guns as well as project Installations
*MUST PREPARED TO WORK SHIFTS -ROTATING 3 SHIFT SYSTEM *
*Knowledge Required*
* PLC Programming -Siemens S5.S7,Festo
* Robotics -Kuka ,ABB
* AC/DC -Drives and Servo Applications and drives experience
* SCADA-WinCC ,WinFlex /HMI -Siemens , EBELT ,BTxxx, Suetron -Programming
* SEW Motors
* Profi Bus
* TIA
* Profi Net
* Hanging Spot Guns Step 7
* Root Cause Analysis
Skills Requires
* Ability to read and understand Electrical Drawings
* Electrical & PLC Fault Finding
* Ability to read and understand Hydraulic/Pneumatic drawings
* Able to work on Phase 380V
Qualifications
* 2-3 years exp in Automotive and instrumentation
* OR Qualified Millwright or Electrician with applicable experience
* T3/S4 Diploma will be an advantage
* 2-3 years as a Technician in the Electrical field ,especially in automotive -hydraulic,maintenance /robotics /projects
R 37000 - 38000 - Monthly
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzQ5MDI2X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1235727&xid=1555_49026
2y
1
SavedSave
*Reference: JHB004431-Ncgob-1*
Our client in Vereeniging is looking for a Machine Shop Manager. The Machine Shop Manager is responsible for managing all the functions of the machine shop to achieve continual improvement in safety, quality, and productivity
*Education and Minimum Requirements:*
A seasoned Artisan/Engineer with a wide range of expertise in manufacturing engineering,
10 -15 years of experience in managerial and or leadership positions in the manufacturing environment
*Responsibilities*
As the Machine Shop Manager, you are responsible for coordinating the production of machined parts, supporting and leading improvement efforts on machines and machine processes, and supporting corporate and local engineering projects for new parts.
The Machine Shop Manager is responsible for coordinating the production of parts, supporting machines and leading improvements on existing parts. CNC Verticals and CNC lathes.
Partners with management team members to achieve their goals.
The objective is to ensure the proper operation of the CNC and conventional machines by the machining team, maintain expenses in line with the budget, and communicate with other departments to ensure an accurate product.
The objective is to direct manufacturing activities to the machine and test hardware in quantities that meet the production control schedule.
Highly experienced in leading a team to profitable success and grooming team members for leadership and career advancement.
* *
Please visit our website at (www.boardroom.co.za)(http://www.boardroom.co.za) for more details and to register your C.V.
R Market Related - Negotiable
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzQ0NDcwX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1234102&xid=1555_44470
2y
1
SavedSave
Well established Forging company on the East Rand has a vacancy for a Toolmaker / CNC Milling & Turning Programmer with CADCAM including experience on Wirecutter
Highly proficient in CADCAM programming on CNC Milling and Turning machines as well as Wirecutter
Control and set offsets
Use engineering measuring equipment correctly and accurately
(Micrometer/Verniers and Height Gauges)
Quality awareness and able to maintain given controlled sizes from products machined from a group of machines
Set up tools on CNC lathe, CNC Milling Machine and Wire cutter machines
Program and operate Fanuc controlled machines
Preform adjustments on programs
Minimum 5 years’ experience in Toolmaking, CNC setting & Programming
Matric and qualified Toolmaker qualification
CNC Setting/Programming Course, Certificate in CADCAM Programming
Work shifts and additional overtime if required
Have own transport
Have a good track record
R200 - R250 per hour + 50% Company Contribution towards Provident Fund
Minimum 5 years’ experience in Toolmaking, CNC setting & Programming
Matric and qualified Toolmaker qualification
CNC Setting/Programming Course, Certificate in CADCAM Programming
Work shifts and additional overtime if required
Have own transport
Have a good track record
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzQ0NDEzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1234070&xid=1555_44413
2y
1
SavedSave
We are a fast growing engineering and manufacturing company in springs.
Operate Horizontal Boring Mill
General machining on lathes and milling machines
Measuring up components
Must have Own Transport
Must be able to work to close tolerances
Work without supervision
Must be able to read and understand technical drawings
Cnc operating experience
Must have Own Transport
Must be able to work to close tolerances
Work without supervision
Must be able to read and understand technical drawings
Cnc operating experience
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI0NzA1X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1185891&xid=1555_24705
2y
1
SavedSave
*Reference: NES013520-GH-1*
An industry leading company involved in the manufacturing of Mining equipment is searching for a Junior Design Draughtsperson to join their team!
*Job & Company Description:*
My clients are market leaders in the Mining manufacturing industry, they’re involved in the design and manufacturing of collision avoidance systems. They are searching for a dynamic and vibrant young Draughtsperson to join their growing team!
*Education:*
* NDip Electronic or Mechanical Engineering
*Job Experience & Skills Required:*
* 2 years’ experience as a Draughtsperson
* Strong technical and drawing abilities
* Experience operating and programming on CNC Machines
* Understanding of SolidWorks CAD and V-Curve Pro
*Apply now! *
For more engineering jobs, please visit (www.networkrecruitment.co.za)(http://www.networkrecruitment.co.za)
If you have not had any response in two weeks, please consider the vacancy application unsuccessful. Your profile will be kept on our database for any other suitable roles / positions.
For more information contact:
Gelaine Hart
Specialist Recruitment Consultant
(ghart@networkrecruitment.co.za)(mailto:ghart@networkrecruitment.co.za)
R 180000 - 220000
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI1NzIxX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1190067&xid=1555_25721
2y
1
SavedSave
My client a leading manufacturer and supplier of conveyor belt solutions to the mining and bulk material handling industries is looking for a Millwright/ Toolmaker/ Electromechanical Technician, the successful incumbent will be responsible for mechanical design, developing, testing, and manufacturing devices, tools, and machines.
*Minimum requirements*
* Assist with mechanical design, develop, test, and manufacture devices, tools, and machines
* Milling and turning of parts
* Develop, manufacture, and assemble mechanical parts for industrial machinery and equipment
* Maintenance of CNC machines, presses, gearboxes, pumps, hydraulic and pneumatic equipment.
* Schedule maintenance, mechanical system, carry out minor and major repairs.
* Keeping records of operations and maintenance procedures.
* Time management
* Diagnosing and repairing faults with tools and machinery and performing regular maintenance.
* Operating specialized tools and machinery.
* Assembling fabricated parts to produce tools and machines.
* Following safety protocols.
* Measuring and marking out materials for fabrication.
* Setting up tools and machinery for fabrication process.
* Monitoring fabrication process and adjusting settings when necessary.
* Perform fault finding on machinery
* Maintain standards in the plant and adhere to all safety rules and procedures
* Maintain production machines, electrically/mechanically driven machines, (preventative maintenance schedule)
* React to breakdowns expediently
*Qualifications*
* N5 or N6 in mechanical or electrical with mathematics
* Matric
* Trade Certificate in Millwright (Electromechanician)
* Diploma in Mechanical Engineering
*Skills:*
* Basic CNC programing G-Code
* Electric & Electronic control systems
* Mechanical equipment automation
* Excellent Communication Skills (Bilingual a bonus)
* 5 Years relevant experience (Mechanical, Electrical, Robotics)
+/- R 30,000 Gross and pension
*Minimum requirements*
* Assist with mechanical design, develop, test, and manufacture devices, tools, and machines
* Milling and turning of parts
* Develop, manufacture, and assemble mechanical parts for industrial machinery and equipment
* Maintenance of CNC machines, presses, gearboxes, pumps, hydraulic and pneumatic equipment.
* Schedule maintenance, mechanical system, carry out minor and major repairs.
* Keeping records of operations and maintenance procedures.
* Time management
* Diagnosing and repairing faults with tools and machinery and performing regular maintenance.
* Operating specialized tools and machinery.
* Assembling fabricated parts to produce tools and machines.
* Following safety protocols.
* Measuring and marking out materials for fabrication.
* Setting up tools and machinery for fabrication process.
* Monitoring fabrication process and adjusting settings when necessary.
* Perform fault finding on machinery
* Main
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzIxMTUwX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1175476&xid=1555_21150
2y
1
SavedSave
*Reference: BOK002227-LA-1*
Trade Tested Turner
Qualification
* Trade Tested Turner
Requirements
* Must have CNC programming experience on Edgecam/Fusion 360
* Turning experience in a factory / manufacturing environment
* Must have precision machining experience on *Lathe *machines (will be tested)
* Must be able to read and interpret engineering drawings
* Able to operate overhead crane and/or forklift
R
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI5MDY3X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1199586&xid=1555_29067
2y
1
My client in the East Rand is urgently seeking a CNC Lathe programmer/setter/operator.
* Manual program and setup knowledge
* Minimum 5-7 years hands on Fanuc Control Programming and setup experience
* Minimum 5-7 years CNC Lathe experience
* Micrometre experience/familiar with measuring equipment
* Good command of English
* MUST RESIDE IN THE EAST RAND
* Must have own transport
* Basic knowledge in Microsoft Word and Excel.
* Weekly maintenance to be done on Machines
* Daily setup of tooling and material required for the production
* All machining data to be captured
R15 000 - R20 000 neg depending on experience
* Weekly maintenance to be done on Machines
* Daily setup of tooling and material required for the production
* All machining data to be captured
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI0NzE5X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1185911&xid=1555_24719
2y
1
SavedSave
David Brown Santasalo is a leading provider of mechanical power transmission solutions for industrial applications. With almost three centuries of combined gear engineering expertise, we deliver new industrial gear units as well as a full range of gearbox support services.
With more than 1,000 employees, 7 major manufacturing plants and 24 service centres across six continents, we are ideally equipped to serve a growing customer base in commodities, marine, defence, power, industrial and consumer end markets.
Through our highly responsive and capable local teams, David Brown Santasalo supports more than 5,000 customers worldwide and our gear systems and service solutions underpin assurance critical applications in industries where failure is not an option. From nuclear submarines and battle tanks to steel mills, rubber plants, coal mines, thermal power stations, port handling operations and oil and gas platforms, David Brown Santasalo provides customers globally with reliable industrial gearboxes that have been proven time and time again.
David Brown Santasalo South Africa is looking for a CNC Programmer to join our organisation.
* To comply with instructions on route sheet to complete task at hand and read drawing that is accompanying the route sheet.
* Accordingly, programme, setting and operating of various CNC machines listed above.
* Logging on and off of jobs onto SAP system.
* Operate Overhead Crane.
* Complying with QESH requirements including quality systems, SOPs and health and safety regulations.
* Responsible for housekeeping in work area.
* Educational requirements: Preferably a qualified artisan with at least N3, or Grade 12 or at least 5 years’ experience as a CNC Programmer.
* Must be able to operate, program and do setting of large work pieces on Horizontal Boring machines, VTL and Bridge type milling machine. Knowledge and experience on Fanuc and Mazatrol controls essential.
* Service driven and reliable.
* Must be able to work within a team environment.
* Must be punctual, accurate, diligent, loyal, honest and conscientious.
Market Related.
* Educational requirements: Preferably a qualified artisan with at least N3, or Grade 12 or at least 5 years’ experience as a CNC Programmer.
* Must be able to operate, program and do setting of large work pieces on Horizontal Boring machines, VTL and Bridge type milling machine. Knowledge and experience on Fanuc and Mazatrol controls essential.
* Service driven and reliable.
* Must be able to work within a team environment.
* Must be punctual, accurate, diligent, loyal, honest and conscientious.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzEzNTUzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1155886&xid=1555_13553
2y
1
My client in the engineering industry is looking for a qualified Manual CNC Machine Operator to join their team in Pretoria, for a 12 month contract.
*Applicants must reside in the area. *
*Applicants who are available immediately will be given preference. *
The main purpose of the role is to programme and operate the manual machines according to specifications and to maximise capacity and productivity by adhering to Company policies and procedures and health and safety principles.
*Duties will include, but are not limited to, the following:*
* Operate a manual machine (drilling, milling and turning).
* Pre-inspection of lathe, milling, radial and magnetic base drilling machines on a daily basis.
* Operate manual magnetic base and radial arm drilling machines as per project activity.
* Compile and file reports on a daily basis as per daily production quality assessment.
* Maintain good housekeeping.
* Must be focussed and attentive as the drilling of header components is expensive and mistakes cannot be tolerated.
* Any other job-related duties as required from time to time.
*REQUIREMENTS:*
* Qualified Artisan, with Grade 12/N3.
* 3 Years’ working experience in a similar role.
* Experience in Cad-cam (Mastercam V10 and up)
* Experience in working on CNC Milling and CNC Lathe machines *(MUST have experience with GURATO machine)*
* Knowledge of operating systems e.g.: Heidenhein iTNC530, Traub and Fanuc
* Must be able to read and interpret technical drawings, especially tolerances and surface finishes.
* Valid driver’s license.
* Willing to work shifts and long hours
*REQUIREMENTS:*
* Qualified Artisan, with Grade 12/N3.
* 3 Years’ working experience in a similar role.
* Experience in Cad-cam (Mastercam V10 and up)
* Experience in working on CNC Milling and CNC Lathe machines *(MUST have experience with GURATO machine)*
* Knowledge of operating systems e.g.: Heidenhein iTNC530, Traub and Fanuc
* Must be able to read and interpret technical drawings, especially tolerances and surface finishes.
* Valid driver’s license.
* Willing to work shifts and long hours
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1Xzg1OTNfXzQ5Nz91dG1fc291cmNlPWd1bXRyZWUmdXRtX21lZGl1bT1mZWVkJmtleXdvcmQ9&jid=1137212&xid=1555_8593
2y
Engineering Company in the East Rand is looking to employ a Technical Junior External Salesman
for a High-tech conventional and CNC machine tools Company for the metal removal sector industry.
Must have Matric
Must have own Transport
Car and petrol allowance (to be discussed in interview)
CNC qualification will be beneficial
Trade: Tool, Jig and Die maker/Fitter and Turner/CNC machinist/Setter/Operator/Programmer
Must have experience on Milling and lathe machines
Must have experience on Conventional Milling and Lathe machines
SECTOR: Engineering and Technical
Job Reference #: JHB000165/SvdM
2y
1
SavedSave
*Reference: NES013520-GH-1*
An industry leading company involved in the manufacturing of Mining equipment is searching for a Junior Design Draughtsperson to join their team!
*Job & Company Description:*
My clients are market leaders in the Mining manufacturing industry, they’re involved in the design and manufacturing of collision avoidance systems. They are searching for a dynamic and vibrant young Draughtsperson to join their growing team!
*Education:*
* NDip Electronic or Mechanical Engineering
*Job Experience & Skills Required:*
* 2 years’ experience as a Draughtsperson
* Strong technical and drawing abilities
* Experience operating and programming on CNC Machines
* Understanding of SolidWorks CAD and V-Curve Pro
*Apply now! *
For more engineering jobs, please visit (www.networkrecruitment.co.za)(http://www.networkrecruitment.co.za)
If you have not had any response in two weeks, please consider the vacancy application unsuccessful. Your profile will be kept on our database for any other suitable roles / positions.
For more information contact:
Gelaine Hart
Specialist Recruitment Consultant
(ghart@networkrecruitment.co.za)(mailto:ghart@networkrecruitment.co.za)
R 180000 - 220000
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI1NzIxX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1190067&xid=1555_25721
2y
Save this search and get notified
when new items are posted!
