Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Results for welding jobs in Engineering & Architecture jobs in Western Cape
1
SavedSave
Our client based in the Northern Suburbs; Cape Town is seeking to employ a Semi-Skilled Carpenter with experience in Assembling / Carpentry work.
Requirements:
·Grade 12 / Senior Certificate
·Must have at least 1 years’ experience in a similar position.
·Must be available immediately.
·Be able to travel to Brackenfell.
·Cupboards, steel, tables, chairs, etc and welding.
To apply, please send your CV to reception@personastaff.co.za
Please note that only shortlisted candidates that meet the requirements will be contacted.
Persona Staff (Pty) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
reception@personastaff.co.za
1d
1
SavedSave
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driver’s license with own reliable transport.
Skills and Knowledge Required
Preventative Maintenance Routines.
Welding (Mig Tig & Arc), Milling, and Turning.
Planning - Check that all part complies with procurement register and data pack.(Report any deviations) Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
Material Cutting - bandsaw, cut-off saw, cutting torch, grinder.
Drilling and/or slotting holes: Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding: Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and fitting related tasks - planning: Check that all part complies with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g.: Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Pneumatics and Hydraulics.
Gearboxes.
Water Systems and Cooling Towers.
Basic Electrical Experience.
Bearing and Shaft Changing.
Fault Finding and Diagnosis.
Lubrication.
Please forward your CV to megan@personastaff.co.za
and indicate your salary expectations.Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004763/MM&source=gumtree
1d
1
SavedSave
Boilermaker (6-month Contract Position)
Our client, based in the Northern Suburbs, is an Internationally established Manufacturing company. They are seeking to appoint a qualified and experienced Boilermaker on a 6-month contract position.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Qualified Boilermaker Trade Test Certificate
Minimum of 1 -2 years’ post trade experience.
A valid driver’s license with own reliable transport
Skills and Knowledge Required
Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
Welding – Mig, Tig and Arc
Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to megan@personastaff.co.za
and indicate your salary expec
SECTOR: Engineering & Technical; Manufacturing
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004764/MM&source=gumtree
1d
1
SavedSave
Our client is an innovative manufacturer of retail shop displays and furniture and they are looking to appoint a suitably qualified junior draughtsman to join their team. The primary role of the Draughtsman is to provide working drawings and additional supplementary information to facilitate the design, manufacture and installation of bespoke joinery and metalwork.
Description of duties:
Responsibilities include gathering drawings and specifications, calculating material and setting up production methods.
Preparing, reviewing and redrafting alongside project teams.
Create detailed designs with computer-aided design software.
Assist with Production Planning
Assisting with programming of machines
Ensure regular housekeeping activities are execute and the execution of Standard Operating Procedures.
Ensure efficient loading and unloading of sheet metal parts into and from Bending Machine
Requirements:
Matric / Grade 12.
National certificate OR Diploma in Drafting.
Minimum of 1-3 years’ similar experience as a draughtsman
Joinery / furniture design experience
Valid driver’s license with own transport.
Experience with Solidworks and CAD software
Must have exposure to the following:
Sheet Metal Manufacturing including laser cutting, bending, and welding
Process Design
Been involved in the test phase.
Been involved in the manufacturing phase.
Staff and production management
Please send your application to julia@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff (PTY) Ltd. is POPIA (Protection of Personal Information Act, 2013) compliant.
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004719/JH&source=gumtree
1d
1
SavedSave
Our client is an innovative manufacturer of retail shop displays and furniture and they are looking to appoint a suitably qualified junior draughtsman to join their team. The primary role of the Draughtsman is to provide working drawings and additional supplementary information to facilitate the design, manufacture and installation of bespoke joinery and metalwork.
Description of duties:
•Responsibilities include gathering drawings and specifications, calculating material and setting up production methods.
•Preparing, reviewing and redrafting alongside project teams.
•Create detailed designs with computer-aided design software.
•Assist with Production Planning.
•Assisting with programming of machines.
•Ensure regular housekeeping activities are execute and the execution of Standard Operating Procedures.
•Ensure efficient loading and unloading of sheet metal parts into and from Bending Machine.
Requirements:
•Matric / Grade 12.
•National certificate OR Diploma in Drafting.
•Minimum of 1-3 years’ similar experience as a draughtsman
•Joinery / furniture design experience
•Valid driver’s license with own transport.
•Experience with Solid works and CAD software .
• Must have exposure to the following:
o Sheet Metal Manufacturing including laser cutting, bending, and welding
o Process Design
o Been involved in the test phase.
o Been involved in the manufacturing phase.
o Staff and production management
Please send your application to craig@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff (PTY) Ltd. is POPIA (Protection of Personal Information Act, 2013) compliant.
craig@personastaff.co.za
1d
1
SavedSave
Responsible for the set up and operate of machine to bend metal structural shapes, such as bars, rods, angles, pipes, and tubes, to angle or contour specified by work order, drawings, templates, or layout: Selects and bolts holding clamp, die block, and guide clamp to machine.
Education & Experience
• Matric.
• Minimum of 1-2 years’ experience in a similar position.
• Experience as a Bending Machine Operator or similar position.
• Experience in the Manufacturing and or Engineering sector.
• Bilingual (Afrikaans and English).
• Computer Literate.
• Driver’s license.
• Attention to detail.
• Good interpersonal communication skills both verbally and written.
• Problem-solving skills.
• Hardworking.
• Dedicated and reliable.
• Can work under pressure.
• Multi-tasking.
• Always willing to learn.
• Flexible with the ability to manage stress.
• Operate machines or equipment which weld, solder, bolt, screw or rivet metal parts together.
• Read specifications or follow verbal instructions.
• Troubleshoot and perform corrective action or minor repairs.
• May select and transport material to work area manually or using crane or hoist.
• Troubleshoot and perform corrective action or minor repairs.
• Build staging or erect scaffolding as required for heavy metalworking jobs.
• Clean or lubricate equipment and replace parts as required.
• Troubleshoot and perform corrective action or minor repairs.
• Check products for correct shapes, dimensions and other specifications.
• Observe and follow company safety rules and regulations.
• Work with others in order to ensure that equipment is in proper working order.
• Operate tools in order to aid in the manufacturing process.
• Responsible for complete of documentation.
• Must be able to analyze situations and find solutions.
reception@personastaff.co.za
1d
1
SavedSave
A client based in Northern Suburbs; Cape Town is seeking to employ Semi-Skilled candidates with experience in:
- Assembling / Carpentry work (Cupboards, steel, tables, and chairs etc.)
- Welding and/or boiler making skills.
All candidates must have basic experience with at least one of the mentioned skills.
Must have Matric.
Any welding / Boiler making, or carpentry / woodwork certificates is beneficial.
Must have at least 1 year experience.
Must be available immediately.
To apply, please send your CV to reception@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
Persona Staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
Please note that only shortlisted candidates that meet the requirements will be contacted.
Persona Staff (Pty) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy
reception@personastaff.co.za
1d
1
SavedSave
Our client based in Brackenfell, Northern suburbs is seeking to employ candidates with assembling and electrical experience.
The position is mainly for assembling and repairing of Refirgeration equipment.
Able to learn for Troubleshoot, repair, or overhaul equipment such as, heat exchangers, other environmental changing devices, other mechanical equipment, or electronic components.
Execute the installation, maintenance, or repairing of refrigeration equipment at the client’s premises as and when the need arises on callouts.
Able to read gauges and instruments, and adjusts mechanisms such as valves, controls, and pumps to control level of fluid pressure and distribution in systems.
Execute soldering (brass, silver, copper), layout, and fitting of piping to industry standards.
Tests malfunctioning systems and components using electrical, mechanical, digital controls. and distribution in systems.
Requirements:
Grade 12 / Matric Certificate
Certificate: Electrical, Plumbing or Refrigeration (advantageous)
Welding experience (beneficial)
Must reside in Cape Town - able to commute to Brackenfell.
Send your CV to reception@personastaff.co.za
Persona Staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
reception@personastaff.co.za
1d
1
SavedSave
Fitter & Turner
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements:
• Grade 12 / National Senior Certificate.
• Section 13 Fitter and Turner Trade Test Certificate.
• 3 - 5 years post trade experience.
• Experience within a manufacturing environment (beneficial).
• Energetic, proactive and able to work under pressure.
• A valid driver’s license with own reliable transport.
Skills and Knowledge Required:
•Preventative Maintenance Routines.
•Welding (Mig Tig & Arc), Milling, and Turning.
•Planning - Check that all part complies with procurement register and data pack. (Report any deviations) Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
•Material Cutting - bandsaw, cut-off saw, cutting torch, grinder.
•Drilling and/or slotting holes: Proper use of hand drill, Mag base drill, machining machine, etc.
•Finishing/Grinding: Remove all shape edgers, burs, welding spatter, etc. (Prep for next phase)
•Machining and fitting related tasks - planning: Check that all part complies with procurement register and data pack. (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
•Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
•Machining: Use appropriate machinery to execute tasks for e.g.: Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
•Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
•Pneumatics and Hydraulics.
•Gearboxes.
•Water Systems and Cooling Towers.
•Basic Electrical Experience.
•Bearing and Shaft Changing.
•Fault Finding and Diagnosis.
•Lubrication.
Please forward your CV to megan@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
megan@personastaff.co.za
1d
1
SavedSave
Boilermaker (6-month Contract Position)
Our client, based in the Northern Suburbs, is an Internationally established Manufacturing company. They are seeking to appoint a qualified and experienced Boilermaker on a 6-month contract position.
Minimum Requirements:
• Grade 12 / National Senior Certificate.
• Qualified Boilermaker Trade Test Certificate.
• Minimum of 1 -2 years’ post trade experience.
• A valid driver’s license with own reliable transport.
Skills and Knowledge Required:
•Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
•Welding – Mig, Tig and Arc
•Drilling and/or slotting holes. Proper use of hand drill, Mag base drill, machining machine, etc.
•Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc. (Prep for next phase)
•Machining and Fitting - Planning: Check that all part complies with procurement register and data pack. (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
•Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
•Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
•Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
•Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
•Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc. installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to megan@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
megan@personastaff.co.za
1d
1
Job description:
The Boilershop team requires a committed, hardworking and reliable General Technical Assistant to join their team. The General Technical Assistant will be responsible for the following tasks, amongst others:
Housekeeping on a daily basisGeneral workshop duties i.e. maintaining the cleanliness of the workshop and tool storeCleaning of toolsIdentify and able to select appropriate hand toolsAble to use basic power toolsAble to do to minor/ basic welding tasksDemonstrate appropriate knowledge of workshop safetyComplete basic task using oxygen/acetylene cutting process under supervisionAssisting Artisans with various tasks as and when required
Qualifying Criteria:
Grade 12Basic knowledge of Health and Safety rulesAbility to handle tools i.e. cutting machinesPrevious experience in the same or similar role advantageousAdhere to Health and Safety rules and regulations
Qualifying Attributes
Hard-working and self-motivatedPrepared to work overtime and weekends when requiredPhysically fit (Strength to handle materials, tools and machines)Sober habitsAble to work in a team as well as independentlyHonest and reliableMust be willing and eager to learnAbility to multi-task and manage a demanding workload in a pressurised environmentMust be comfortable working in confined spaces and at heightsPhysically mobile and energeticAbility to follow rulesBe organised and keep their work area neat and tidy
Other Information:
Job type: Permanent position
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yMTk5MDQ4NzQ4P3NvdXJjZT1ndW10cmVl&jid=1640756&xid=2199048748
1d
1
Job description:
The Boilershop team requires a committed, hardworking and reliable General Technical Assistant to join their team. The General Technical Assistant will be responsible for the following tasks, amongst others:
Housekeeping on a daily basisGeneral workshop duties i.e. maintaining the cleanliness of the workshop and tool storeCleaning of toolsIdentify and able to select appropriate hand toolsAble to use basic power toolsAble to do to minor/ basic welding tasksDemonstrate appropriate knowledge of workshop safetyComplete basic task using oxygen/acetylene cutting process under supervisionAssisting Artisans with various tasks as and when required
Qualifying Criteria:
Grade 12Basic knowledge of Health and Safety rulesAbility to handle tools i.e. cutting machinesPrevious experience in the same or similar role advantageousAdhere to Health and Safety rules and regulations
Qualifying Attributes
Hard-working and self-motivatedPrepared to work overtime and weekends when requiredPhysically fit (Strength to handle materials, tools and machines)Sober habitsAble to work in a team as well as independentlyHonest and reliableMust be willing and eager to learnAbility to multi-task and manage a demanding workload in a pressurised environmentMust be comfortable working in confined spaces and at heightsPhysically mobile and energeticAbility to follow rulesBe organised and keep their work area neat and tidy
Other Information:
Job type: Permanent position
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS81OTUzMTY0MDg/c291cmNlPWd1bXRyZWU=&jid=1664971&xid=595316408
1d
1
Job description:
The Boilershop team requires a committed, hardworking and reliable General Technical Assistant to join their team. The General Technical Assistant will be responsible for the following tasks, amongst others:
Housekeeping on a daily basisGeneral workshop duties i.e. maintaining the cleanliness of the workshop and tool storeCleaning of toolsIdentify and able to select appropriate hand toolsAble to use basic power toolsAble to do to minor/ basic welding tasksDemonstrate appropriate knowledge of workshop safetyComplete basic task using oxygen/acetylene cutting process under supervisionAssisting Artisans with various tasks as and when required
Qualifying Criteria:
Grade 12Basic knowledge of Health and Safety rulesAbility to handle tools i.e. cutting machinesPrevious experience in the same or similar role advantageousAdhere to Health and Safety rules and regulations
Qualifying Attributes
Hard-working and self-motivatedPrepared to work overtime and weekends when requiredPhysically fit (Strength to handle materials, tools and machines)Sober habitsAble to work in a team as well as independentlyHonest and reliableMust be willing and eager to learnAbility to multi-task and manage a demanding workload in a pressurised environmentMust be comfortable working in confined spaces and at heightsPhysically mobile and energeticAbility to follow rulesBe organised and keep their work area neat and tidy
Other Information:
Job type: Permanent position
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zMzM5NTE4MTgxP3NvdXJjZT1ndW10cmVl&jid=1620023&xid=3339518181
1d
2
SavedSave
Looking for an Experienced Workshop Fitter & Turner to join our team.Must be excellent in the following:*Fitting and Turning on mill and lathe- a MUST*Hydraulics and Pneumatics- a MUST *Welding-Optional *Working on Hydraulic Cylinders & Hydraulic equipment will be an advantageous Please send CV to info@sadanhydrauliccentre.co.za
8d
1
SavedSave
Our client is based in Brackenfell, and they are seeking to employ Welders. Do you have a matric certificate and at least one years working experience within a welding or semi-skilled boiler making position?
Responsibilities:
· Completed Grade 12 / Matric Certificate (certificate will be requested).
· Welding experience a must (Arc / Mig / Stick).
· Fabrication experience is a MUST.
· Forklift license is beneficial.
· Assistant operating of machinery experience beneficial.
· Must be hardworking and dedicated.
· Ability and willingness to work 12-hour shifts, including nightshifts and weekends.
· Clean criminal record.
AREA: Brackenfell (Transport will be own responsibility)
APPLY: Send your CV and all documents to reception@personastaff.co.za
Please note that only short-listed candidates will be contacted.
reception@personastaff.co.za
18d
Save this search and get notified
when new items are posted!
