Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Results for mechanical engineer jobs in Engineering & Architecture jobs in South Suburbs
We are Urgently looking for a Mechanic with experience in the Bike industry drivers License would be an advantage but optional. Please Call Riette on 067 770 6107
1d
Ads in other locations
1
SavedSave
Our clients in the Petroleum Oil and Gas sector is looking for a Fleet Controller to join their team based in Empangeni KZN.
Qualifications and Requirements:
Matric
Preferably newly acquired diploma in logistics
Ability to work under pressure to meet deadlines
Knowledge and Skills:
Advanced knowledge of all Microsoft Office applications (Word / Excel / PowerPoint), in particular
Excel
Must be computer literate
Excellent communication skills
Must be able to think on your feet
Goal-driven, no time wasters
Team-player
Able to work and thrive under pressure
To go the extra mile, whether expected of you or not.
Duties:
Preparing drivers paperwork with stops, load release etc.
Overseeing and managing all drivers and assistants
General fleet management
Briefing of drivers
Scanning in drivers paperwork to the de briefing hub every morning.
Vehicle monitoring and checking for suspicious stops
Tracker and trip sheet analysis
Maintain driver discipline .
Maintain truck turnaround time
Capture all drivers log sheets with overtime and night-outs
Keep record of all inhouse training and arrange for days for in-house training
Issuing of warnings
Preparing of cases for hearings
Assist with filling up trucks to get urgent orders out.
Assist with getting rid of preloads and checking in with customers if they are satisfied or if they need product
Processing of drivers leave and managing fleet to ensure there are enough drivers to trucks
Assist with planning and scheduling
Managing drivers’ hours worked
Liaising with gantries on renewing safeloads and driver inductions
Accident investigations
Communicate with customers late deliveries.
Daily speeding and tracking reports
Ensuring that drivers and customers calls are answered in a timeous manner-after hours included
Assist with HSSE – Safety manager to guide you.
Spot checks (HSE)
Near miss (HSE)
PPE Issue
Updating files (hard and soft copy)
Loading of trucks (safeloads, Hazchem’s, DGP and medicals. So, they can update on their side)
Maintaining of driver files
Maintaining of medicals Hazchem’s and DGP
Capturing all incidents and accidents on (QM) quality manager
Ensure toolbox talks are done on a weekly Basis
KPA on a monthly basis
Harbour permits(yearly) assist
Fire permits (yearly) assist
Liaising with the mechanics on trucks that need to be serviced and breakdowns and planning to get
defects sorted out
Alternating standby
Retrieve footage
Communication with Tracker and Truck assist
SECTOR: Petroleum, Oil and Gas
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93ZWJhcHAucGxhY2VtZW50cGFydG5lci5jb20vd2kvYXBwbGljYXRpb25fZm9ybS5waHA/aWQ9c3RhZmZzb2xzJnZhY2FuY3lfcmVmPVBFMDA1ODkxL0tC&jid=1805339&xid=PE005891/KB
2d
1
SavedSave
Position: Design Engineer
Location: Pinetown, Durban
Reports To: Engineering & Business Development Executive
Purpose of the Role:
Support of production engineering for maximization of efficiency and process uptime.To ensure hand overs of products, processes and documentation to production are conducted adequately communicating all critical characteristics and quality information appropriately.New product development to meet customer specification and comply with both internal and external systems requirements within the agreed upon timeline.
Minimum Qualifications Criteria:
BTech in Mechanical Engineering5 years relevant work experienceKnowledge and experience with IATF Core Tools
Skills
Competent in using Microsoft Office programsCompetent in using 3D CAD Modeling SoftwareBasic manufacturing process knowledge & experience, i.e. CNC Tube & Plate bending, Laser cutting, robotics (welding, plasma cutting, polishing).Basic skills in Project Management is a requirement
Primary Duties
Product EngineeringProcess EngineeringProject ManagementProblem Investigation
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS80MTE3NjI0MjQyP3NvdXJjZT1ndW10cmVl&jid=1194900&xid=4117624242
2d
1
SavedSave
Clifford Machines & Technology provides industrial welding, grating and wire working equipment. For over 50 years, Clifford has been a leader in their field and we are looking for a new addition to our Design Team.
If you have experience in the machine building industry, we want to hear from you. Read further or visit (www.cliffeng.com)(https://www.cliffeng.com) for further details.
*
* Design of automated machinery using 3D CAD (Solidworks) from conception through to issuing of manufacturing drawings.
* Attention to detail and the ability to complete a job 100% accurately is a key requirement.
* Candidate must have the ability to do new concept creation quickly, using hand sketches, white board drawings or other means to capture and scale design intent quickly.
* Research of components, materials, and processes to enhance machine designs and efficiency.
* Working to business systems in line with ISO9001.
* Contact suppliers for availability of components to ensure kitting schedules are met.
* Place POR’s when necessary.
* Machine building and assembly of parts when necessary.
* Site commissioning if required.
* Project management.
* Willing to travel internationally.
*
* Must have 5 years of CAD 3D (Solidworks or similar 3D) design experience – Design, Assembly and Drafting of complex assemblies.
* Knowledge and use of PDM/PLM systems would be advantageous.
* A tertiary technical qualification would be advantageous buy not compulsory.
* Proficient in MS Word, Excel and Outlook.
* Excellent verbal and written communication skills.
Negotiable for the right candidate
*
* Must have 5 years of CAD 3D (Solidworks or similar 3D) design experience – Design, Assembly and Drafting of complex assemblies.
* Knowledge and use of PDM/PLM systems would be advantageous.
* A tertiary technical qualification would be advantageous buy not compulsory.
* Proficient in MS Word, Excel and Outlook.
* Excellent verbal and written communication skills.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzUzMjUxX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1241064&xid=1555_53251
2y
1
SavedSave
*Reference: PMB000832-LF-1*
Technical Key Accounts Manager- Pietermaritzburg
An established manufacturing specialist currently seeks an experienced Key Accounts Manager to be based out of Pietermaritzburg.
The focus of the role will be on successfully managing and growing key client accounts. The role will also involve project management and tasks such as establishing budgets, submitting annual price reviews, co-ordinating project teams and conducting project reviews.
Requirements:
* Matric (a relevant qualification in engineering/ business/ manufacturing is preferred)
* At least 2-3 years of experience in a Key Accounts role
* Experience in reading and understanding CAD and 2-D drawings/designs
* A background in mechanical engineering is preferred
* Exposure to TQM and IATF standards and documentation
* Excellent business and financial acumen, able to budget and understand costs/ profit, see trends and patterns and make appropriate business decisions based on data
* Proven relationship-management skills
* Strong project management experience
* Good leadership ability
* A confident and strategic approach
* Full computer literacy including MS Excel, Word, Teams.
R
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzQ0NTYzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1234149&xid=1555_44563
2y
1
SavedSave
*Reference: NES013895-SV-1*
A market leader specializing with valves are looking for a Technical Valve Sales Engineer to join their national team
*Job & Company Description:*
A pioneer in the supply of valves to large industries like mining, FMCG, pulp and paper industry are looking for an ambitious Technical Valve Sales Specialist to join their national sales team. If you have experience in the Valve sales and are driven to success then apply today.
*Education:*
* Instrumentation qualification or Mechanical
* N6 or NDip Mechanical Engineering will be advantageous.
*Job Experience & Skills Required:*
* Minimum of 5 years’ experience on manual and control valves or flow related equipment or instrumentation.
* Have 5 years sales experience in EPC type projects.
* Sales experience to the mining industry will be preferred.
* Proven track record handling technical sales and excellent knowledge of the sales cycle.
*Apply now! *
For more engineering jobs, please visit (www.networkrecruitment.co.za)(http://www.networkrecruitment.co.za)
If you have not had any response in two weeks, please consider the vacancy application unsuccessful. Your profile will be kept on our database for any other suitable roles / positions.
For more information contact:
For more information contact:
Shaleen van Staden
Researcher - Engineering
087 351 0724
R TBC - Annually
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzUwOTczX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1236713&xid=1555_50973
2y
1
The vacancy is for a Product Designer within the Engineering Design Team. The team’s core function is to take ownership for the support and strategic development of several vehicle functional systems: Ve-hicle suspension, Wheelsets, Hydraulics and Pneumatics, Cylinders and Greasing. The role focuses pri-marily on the full lifecycle development and implementation of new design solutions to ensure that the company’s product remains at the cutting edge of technology and competitiveness.
* Apply Engineering Design Process to generate, evaluate and implement design concepts.
* Generate 3D parametric models and 2D manufacturing and assembly drawings.
* Complete projects within the agreed timelines and adhering to overall project schedules.
* Undertake and manage laboratory and field testing of new concepts to evaluate the performance.
* Take ownership and provide technical support and troubleshooting for areas of responsibility.
* B.Eng Mechanical Engineering degree. Minimum of 6 years post degree experience for PD2 consideration in the automotive or mobile construction/mining equipment industries.
* Proficient in Mechanical Desktop, Pro Engineer/ CREO (preferred) or other 3D parametric modelling software. Proficient with Microsoft Office Excel, Word, PowerPoint.
* Good communication skills and the ability to interact successfully in a team environment.
* Good technical analysis skills and ability to calculate, interpret and apply engineering principles to achieve a practical and cost-effective design solution. A logic and methodical approach is required.
* A self-starter with passion and drive to make a difference.
R670 032 per annum
* B.Eng Mechanical Engineering degree. Minimum of 6 years post degree experience for PD2 consideration in the automotive or mobile construction/mining equipment industries.
* Proficient in Mechanical Desktop, Pro Engineer/ CREO (preferred) or other 3D parametric modelling software. Proficient with Microsoft Office Excel, Word, PowerPoint.
* Good communication skills and the ability to interact successfully in a team environment.
* Good technical analysis skills and ability to calculate, interpret and apply engineering principles to achieve a practical and cost-effective design solution. A logic and methodical approach is required.
* A self-starter with passion and drive to make a difference.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzM5NjgxX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1232074&xid=1555_39681
2y
1
SavedSave
A self-confident and energetic individual is needed in Durban to expand their client base. They must be sales-driven and have a track record of exceeding targets consistently. The individual needs to be customer-centric and focused on building strong relationships with customers and must possess a technical qualification or background in electrical or mechanical engineering
• Implementation of 80/20 initiatives to drive sustainable growth and margin with key customers.
• Develop clear and effective written proposals/quotations for current and prospective customers.
• Expedite the resolution of customer problems and complaints.
• Coordinate sales effort with marketing, sales management, accounting, logistics and technical service groups.
• Create and manages a customer value plan for existing customers highlighting profile, share and value opportunities.
• Negotiate TCO (Total Cost of Ownership) initiatives & contracts.
• Identify advantages and compare organization’s product/services.
• Plan and organize personal sales strategy by maximizing the return of time investment for the territory/segment
• Minimum Qualification – Matric – Technical and or Mechanical qualification is seen as an added advantage
• Must possess at least 2+Years’ sales / account management experience in the Electrical/Mechanical sector.
• Minimum Qualification – Matric – Technical and or Mechanical qualification is seen as an added advantage
• Must possess at least 2+Years’ sales / account management experience in the Electrical/Mechanical sector.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzM3NDk4X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1231421&xid=1555_37498
2y
1
Our Client in Richards Bay is currently seeking a Mechanical Engineer Lead RequirementsMechanical Engineering National Diploma / Degree (not negotiable)PR Eng will be advantageousECSA Registration advantageousWelding Inspector qualification advantageousLeadership / Management Diploma advantageousExperienceComputer literacy: Word, Excel, Microsoft Project and SAP would be advantageousManufacturing experience and/or Aluminium smelter equipment experience will be advantageousKnowledge of Solios/ECL equipment advantageous3 – 5 years’ experience managing a mechanical engineering departmentMore than 2 years’ experience in a senior positionExperience with CAD software/Autodesk Inventor visit www.mprtc.co.za to applyBy submitting any Personal Information to MPRTC in any form you acknowledge that such conduct constitutes a reasonable unconditional, specific and voluntary consent to the processing and storing of such Personal Information by MPRTC and/or MPRTC’s clients and/or verification information suppliers. You voluntarily consent that for the purposes of potentially gaining future employment opportunities, thorough background screening which may include but will not be limited to criminal, fraud, ITC and employment reference checks may be conducted. Should you have not been contacted within 14 days, please consider your application unsuccessful. You have the right to “Opt-Out” of electronic communications from us at any time and you also have the right to request us to delete your personal information by contacting us.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzUwMjMyX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1189677&xid=1266_50232
2y
1
SavedSave
TRONOX BRIGHTENS PEOPLE`S LIVES. WE ARE A DIVERSE GLOBAL WORKFORCE THAT IS COMMITTED TO SAFE AND SUSTAINABLE BUSINESS PRACTICES THAT BRING VALUE TO OUR SHAREHOLDERS, CUSTOMERS, AND BUSINESS PARTNERS. TRONOX MINES AND PROCESSES TITANIUM ORE, ZIRCON AND OTHER MINERALS, AND MANUFACTURES TITANIUM DIOXIDE PIGMENTS THAT ADD BRIGHTNESS AND DURABILITY TO PAINTS, PLASTICS, PAPER, AND OTHER EVERYDAY PRODUCTS. WE OFFER AN ATTRACTIVE COMPENSATION AND BENEFITS PACKAGE THAT INCLUDES COMPETITIVE SALARY AND INCENTIVES, AND INVEST IN OUR GREATEST ASSETS BY CREATING OPPORTUNITIES FOR GROWTH AND DEVELOPMENT IN A DIVERSE AND SUPPORTIVE WORK ENVIRONMENT. TECHNICIAN IN TRAINING LEARNING PROGRAMME 2022THE FOLLOWING OPPORTUNITIES ARE AVAILABLE AT OUR KZN SANDS OPERATION LOCATED IN EMPANGENI AND MTUNZINI, KWAZULU NATAL.Primary purpose: To undergo an intensive learning programme that will result in completion of P1 and P2. These are temporary positions for a period of 12 months.Tronox KZN Sands is looking for dynamic, self-motivated individuals with the necessary ability and the intention to enter a Work Integrated Learning programme for the following disciplines:•Mechanical Engineering x1•Electro Mech/Instrumentation Engineering x2•Electrical Engineering (Heavy current) x1Duties & Responsibilities:Programme outcome Meet requirements as per the in-service-training and developmental programme and agreement. Personal commitment to study and work towards achievement of success indicators of developmental programme.SHEQEnsure and maintain a healthy environment, safe operations and practices. Comply with SHEQ and technical requirements in line with Plant availability and performance targets. Monitor, identify and respond to defects and / or sub-standard equipment performance and other improvement opportunities.Maintenance ControlPerform required tasks and activities according to specification at the Production/ Maintenance/ Engineering Department. Control and oversee quality of work. Perform basic maintenance tasks and maintain housekeeping to high standard. Monitor process, conduct inspections and rectify sub-standard performance / conditionsProcess EfficiencyAdhere to planned production / maintenance schedules and key performance indicators. Ensure the optimal use of available resources, both people and equipment.Technical supportSupport Supervisor, coworkers and maintenance personnel in execution of work. Communicate effectively with line Supervisors and related plant personnel.Who can apply?Candidates who completed:•S4 in above mentioned discipline (Compulsory)•Grade 12 with Mathematics and Physical Science (Compulsory)•Valid Driver`s Licence (Compulsory)•Any Candidate currently registered with any SETA for learning programme is disqualifiedThe following documentation should accompany your application:•A cover letter•CV with certified copies of certificates (not older than 3 months)•Certified copy of your Identity Document (not older than 3 months)•Proof of Residence: Muni
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQ5MDc4X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1185561&xid=1266_49078
2y
1
*Well established Engineering company situated in Umboginitwini, south of Durban seeks a Mechanical Fitter with at least 5 years experience as a qualified Mechanical Fitter/Millwright.*
*Automotive industry is an advantage*
*Experience on mechanical presses and rotating equipment and PLC experience is essential*
* Fault finding and problem solving during equipment breakdowns.
* Preventative maintenance on machinery.
* Install and repair various types of mechanical equipment.
* Complete job cards and time sheets.
* Manage critical spares.
* Matric Certificate.
* Trade Tested fitter/millwright.
* At least 5 years as a qualified Mechanical Fitter/Millwright (in the automotive industry would be an added advantage).
* *Experience on mechanical presses and rotating equipment is essential*
* Millwright with PLC experience will be an added advantage.
* Strong technical skills.
* Good communication skills.
* Problem-solving skills.
* Understanding production equipment and processes.
Competitive salary plus benefits
Please note that only suitably qualified candidates will be contacted.
If you have had no response within 2 weeks your application was unsuccessful
* Matric Certificate.
* Trade Tested fitter/millwright.
* At least 5 years as a qualified Mechanical Fitter/Millwright (in the automotive industry would be an added advantage).
* *Experience on mechanical presses and rotating equipment is essential*
* Millwright with PLC experience will be an added advantage.
* Strong technical skills.
* Good communication skills.
* Problem-solving skills.
* Understanding production equipment and processes.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI0NzUwX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1185927&xid=1555_24750
2y
1
*NEW EMPLOYMENT AVAILABLE*
*Title: Armature Winder (2.I.C) Workshop Supervisor*
*Area: Northern KZN*
*Industry: Electrical Engineering*
*Ref No.:* TRG 1695
*Salary:* To be discussed at interview
*Start Date:* As soon as possible
* We will ONLY consider CV’s that have been emailed to; therecruitmentguy @ outlook .com
* (Use Ref #1695)
An opportunity for an experienced *ARMATURE WINDER *to fill the role of a *(2.I.C) WORKSHOP SUPERVISOR *is required for permanent employment based in *Northern KZN.*
* A qualified / trade tested *ARMATURE WINDER *with a minimum 10 years’ experience in testing & wiring electrical motors (AC / DC) post trade test completion.
* Previous Supervisory / 2/I.C. / Charge-Hand experience in a Mechanical / Electrical Workshop environment essential.
*Minimum Application Requirements:*
* Trade Tested Armature Winder (Electrician)
* Minimum of 10 years’ experience in testing / wiring electrical motors (AC / DC) (post trade test)
* Min 2-3 years previous 2.I.C. / Workshop Supervisory experience required
* Knowledge of Quality Control standards and testing / inspection methodologies
* All applications must have traceable and contactable references.
* Your CV needs to reflect your motor testing / armature winding experience.
* This position is available immediately, therefore we require applications who are able to attend interviews ASAP.
*Salary:* To be discussed at interview
*Minimum Application Requirements:*
* Trade Tested Armature Winder (Electrician)
* Minimum of 10 years’ experience in testing / wiring electrical motors (AC / DC) (post trade test)
* Min 2-3 years previous 2.I.C. / Workshop Supervisory experience required
* Knowledge of Quality Control standards and testing / inspection methodologies
* All applications must have traceable and contactable references.
* Your CV needs to reflect your motor testing / armature winding experience.
* This position is available immediately, therefore we require applications who are able to attend interviews ASAP.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI0MTkzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1184706&xid=1555_24193
2y
1
SavedSave
Our Howick based client is looking for an Operations Foreman who has the skills of a boiler maker/welder or site manager.
Essential Competencies: •
the ability to communicate effectively and positively with people at all levels – this includes staff, customers and stakeholder and management , strong level of technical understanding of systems.
Ability to assist and lead in project management
Expereince related to crushing plants, both mobile and static
Mining industry eperience
• good business and budget understanding and commercial awareness
• efficient management skills with a high work ethic;
• respectful, innovative and consistent leadership qualities and teambuilding skills;
• performance management and disciplinary procedures
• the ability to think laterally and to problem solve;
• ability to leverage technology
• knowledge of industry relevant health and safety legislation and regulations with the ability to relate them to a practical working environment;
• an ability to tolerate (some of the time) noisy, dirty and uncomfortable working environments.
5 years in mining or similar type industry
Qualifications & Experience
: • Minimum matric, but preferably a national qualification either in Civil, Mechanical Diploma including welding, hands on fabrication, repairs and maintenance.
• The applicant must be experienced in assisting and leading projects
• Experience in reading of fabrication Plans and implementing them into projects
. • Ability to communicate in Zulu and English.
• Computer skills at intermediate level – MS Excel/Outlook/Report writing.
Middle management related
5 years in mining or similar type industry
Qualifications & Experience
: • Minimum matric, but preferably a national qualification either in Civil, Mechanical Diploma including welding, hands on fabrication, repairs and maintenance.
• The applicant must be experienced in assisting and leading projects
• Experience in reading of fabrication Plans and implementing them into projects
. • Ability to communicate in Zulu and English.
• Computer skills at intermediate level – MS Excel/Outlook/Report writing.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzIzMjY1X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1181867&xid=1555_23265
2y
- Permanent position available for a skilled Millwright with proven track record- Skills required to cover CNC Machines (All with Fanuc Controls), Conventional Machines, Hydraulics, Pneumatics, Electrical and Electronic- Assembling and installing machines then testing them to make sure they are working correctly- Must work in full compliance with the approved safety regulations- Managing the layout and placement of equipment and machinery in factory settings to ensure minimum downtime- Identifying and repairing problematic parts of a machine by running tests, making repairs, or installing new parts- Dismantling older machines and replacing them with new ones- Overseeing preventive maintenance by identifying and correcting potential issues, removing worn out pieces and lubricating mechanical partsPlease email detailed CV to rachael@rotacon.co.za, with traceable employment history and qualification records
6d
1
SavedSave
Am mechanic i have trade test grade 1 for motor vehicle mechanics with 10 years experience
8d
1
*Principal Engineer (Design Engineer: Manager) required by client in the automotive component / accessory manufacturing sector*
* Product engineering
* Process engineering
* Project management
* Problem investigation
* Staff management
* Support production engineering for maximization of efficiency and process uptime
* Ensure hand overs of products, processes and documentation to production are conducted communicating all critical characteristics and quality information appropriately
* New product development to meet customer specification and comply with both internal and external systems requirements within the agreed upon timeline.
* Handle and manage multiple projects
* Ensure that designs are according to client specification
* Manage and or produce BOMs
* Design new mechanical components using Solidworks and AutoCAD
* 2D and 3D modelling
* Sheet metal design
* Design of automotive components and accessories
* Assist the factory with technical information during production builds
* Produce manufacturing specification 2D drawings
* Stress analysis simulations
* Fatigue and life cycle analysis
* 3D component and accessory modelling
* Production ready sheet metal design (Solidworks)
* Product design and development
* Research and development for design improvements
* Creating operation manuals, drawing control, BOMs, fitment instructions, etc
* Competent in MS Office
* Competent in using 3D CAD modeling software
* Manufacturing process knowledge & experience, i.e., CNC tube & plate bending, laser cutting, robotics (welding, plasma cutting, polishing)
* Project management skills
* B Tech: Mechanical Engineering
* 5 years relevant work experience
* Knowledge and experience with IATF core tools
* Competent in MS Office
* Competent in using 3D CAD modeling software
* Manufacturing process knowledge & experience, i.e., CNC tube & plate bending, laser cutting, robotics (welding, plasma cutting, polishing)
* Project management skills
* B Tech: Mechanical Engineering
* 5 years relevant work experience
* Knowledge and experience with IATF core tools
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzMxNjU5X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1206772&xid=1555_31659
2y
1
Our Client in Richards Bay is currently seeking a Mechanical Engineer Lead RequirementsMechanical Engineering National Diploma / Degree (not negotiable)PR Eng will be advantageousECSA Registration advantageousWelding Inspector qualification advantageousLeadership / Management Diploma advantageousExperienceComputer literacy: Word, Excel, Microsoft Project and SAP would be advantageousManufacturing experience and/or Aluminium smelter equipment experience will be advantageousKnowledge of Solios/ECL equipment advantageous3 – 5 years’ experience managing a mechanical engineering departmentMore than 2 years’ experience in a senior positionExperience with CAD software/Autodesk Inventorvisit www.mprtc.co.za to apply By submitting any Personal Information to MPRTC in any form you acknowledge that such conduct constitutes a reasonable unconditional, specific and voluntary consent to the processing and storing of such Personal Information by MPRTC and/or MPRTC’s clients and/or verification information suppliers. You voluntarily consent that for the purposes of potentially gaining future employment opportunities, thorough background screening which may include but will not be limited to criminal, fraud, ITC and employment reference checks may be conducted. Should you have not been contacted within 14 days, please consider your application unsuccessful. You have the right to “Opt-Out” of electronic communications from us at any time and you also have the right to request us to delete your personal information by contacting us.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzUwMjM0X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1189678&xid=1266_50234
2y
1
*Reference: JHB003401-VV-2*
Earthmoving Technician - Field Service Technician for a company based in Durban
* Candidate must be a Trade tested Auto Electrician (Not negotiable)/ / Trade Tested Earthmoving Mechanic
* Must have worked on Earthmoving Equipment
* Extensive travel locally and up Africa
* Repairs, faultfinding, maintenance
R R30 000 - R40 000 plus Medical, pension, travel allowance , live in allowance, petrol card and company vehicle
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzIyNzMzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1179513&xid=1555_22733
2y
1
SavedSave
• Ability to interpret technical drawings and specification.
• Core Tools (APQP, FMEA, Control Plans, Measurement System and SPC).
• IATF16949 basic understanding.
• 8D problem solving skills.
• Interpretation of external quality standards
• Technical knowledge and report writing
• CAD – basic understanding
• Able to cope with pressure and conflicting priorities.
• Relevant drivers license
• Microsoft Excel – intermediate
• Microsoft Outlook – basic
• Microsoft Word – intermediate
• Microsoft PowerPoint – basic
• Superb analytical, problem-solving, and critical thinking skills.
• Strong leadership qualities.
• Superb written and verbal communication skills.
• Ability to make decisions under pressure.
• Great attention to detail and organizational skills.
• Proficient in 2D and 3D parametric CAD software
• 3D machining software programmer
• Understanding & applying the principles of Tool, Jig & Die Making
• Ability to read and create Technical Drawings
• BTech or equivalent technical tertiary qualification/s: Industrial Engineering, Production Engineering, Mechanical Engineering or related
• 5 years automotive process engineering experience.
• 5 years’ experience in Automotive Metal Stamping environment
• CAD software experience.
• BTech or equivalent technical tertiary qualification/s: Industrial Engineering, Production Engineering, Mechanical Engineering or related
• 5 years automotive process engineering experience.
• 5 years’ experience in Automotive Metal Stamping environment
• CAD software experience.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzIzODk4X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1184545&xid=1555_23898
2y
1
Say goodbye to unemployment with Tumaini Consulting!
My client is a mechanical, electrical, fire and wet services consulting engineering firm. They provide innovative (HVAC/Fire/Wet/Energy Efficiency/Water Efficiency) designs and sustainable solutions that meet or exceed the expectations of their clients at the lowest life cycle cost within the agreed time, quality and budget constraints.
Duties & Responsibilities
* Produce concept, tender and technical mechanical engineering drawing for commercial buildings, hospitals, data centres etc.
* Building service experience will be an advantage.
* Revit MEP Certification required
Benefits include:
* Pension
* Group Life
* Performance Bonus
* Package Structuring
Should you meet the minimum requirements for this position, please email your updated CV attached to (Email Address Removed) , alternatively contact the team on (Phone Number Removed); or visit our website, (URL Removed)
Correspondence will only be conducted with short listed candidates. Should you not hear from us within 3 days, please consider your application unsuccessful.
*Desired Skills: *
* Technical Drawing
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU0XzgzMDVfXzQ5Nz91dG1fc291cmNlPWd1bXRyZWUmdXRtX21lZGl1bT1mZWVkJmtleXdvcmQ9&jid=1175271&xid=1554_8305
2y
Save this search and get notified
when new items are posted!