Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Some search tips we've found useful:
- Check the spelling of your search terms
- Use fewer or more general search terms
- Try browsing a category related to your search terms
Ads in other locations
1
SavedSave
Our client in the agricultural sector is seeking an Automation Technician to join their team. This role will report directly to the Technical Manager.
Duties & Responsibilities:
Development of AutoCAD drawings and design.
Assist with technical projects and Beta Sites as and when needed.
Assist with assembly.
Automation of irrigation dosing units.
Assist with controllers in cabinets with protection devices.
Assist with assembly of radio units.
Testing software and hardware.
Wiring of cabinets and panels
Troubleshooting of controller hardware and software.
Assist with telephonic support to dealers and end users.
On-Site support to dealers and end users â?? South Africa and SADC Countries.
Training on DF products, training dealers and end users on the correct usage of the automation equipment.
Assist with the servicing of filter banks and back flush controllers.
Requirements:
Matric certificate.
3+ years in a similar role.
Must have good communication skills in English and Afrikaans.
National diploma or degree in electronics/mechatronics.
Drivers license.
ELV electrical systems and VSD/PLC.
An understanding of hydraulics
AutoCAD knowledge.
Problem solving and organizational skills.
To apply, please send your CV with your salary expectations to craig@personastaff.co.za
 Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. By applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request our POPI Act Policy.
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004599/CS&source=gumtree
4h
SavedSave
Client based on the East Rand has a vacancy for a Machine Tool Technician with Millwright Trade Test - MUST
come from Machine Tool industry
Trade Tested MillwrightMore than 4 years experience as Technician within the Machine Tool industrySolid Mechanical and Electrical experienceValid drivers licenseOwn vehicleExperience on various machinery i.e. Hand Held Lasers, XS Fiber Laser & Tube & Sheet Cutting Machines, CNC Plasma Cutting Machines, Milling Machines, CNC Milling Machines etc.Prepared to do field service duties and repairs on client sitesONLY apply if you meet ALL of the above requirements
Please consider your application unsuccessful if you do not hear from us within 2 weeks.
SECTOR: Engineering and Technical
Job Reference #: JHB000347/AH
2d
1
SavedSave
Our client in the Northern Suburbs is looking for a qualified Electrical Technician
to join their team.
Requirements:
A qualified electrician with at least N4 qualification.
At least 2 years metering related experience.
Fully bilingual (Afrikaans and English)
Excellent client service skills
Driverâ??s License
Timekeeping and planning
Good verbal and written skills
Computer literate
Deadline and goal orientated.
The ability to work under pressure.
Responsibilities:
Technical audits on properties
Examine under recoveries from a technical perspective.
Make technical drawings of metering reticulation of examined properties.
Installation of electrical metering equipment.
Calculate / forecast recoveries.
Stock management
General administrative tasks
To apply, please send your CV to hannah@personastaff.co.za
     Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful. Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004652/H&source=gumtree
2d
1
SavedSave
Our client based in Brackenfell, Northern suburbs is seeking to employ candidates with assembling and electrical experience.
The position is mainly for assembling and repairing of Refirgeration equipment.
Able to learn for Troubleshoot, repair, or overhaul equipment such as, heat exchangers, other environmental changing devices, other mechanical equipment, or electronic components.
Execute the installation, maintenance, or repairing of refrigeration equipment at the client’s premises as and when the need arises on callouts.
Able to read gauges and instruments, and adjusts mechanisms such as valves, controls, and pumps to control level of fluid pressure and distribution in systems.
Execute soldering (brass, silver, copper), layout, and fitting of piping to industry standards.
Tests malfunctioning systems and components using electrical, mechanical, digital controls. and distribution in systems.
Requirements:
Grade 12 / Matric Certificate
Certificate: Electrical, Plumbing or Refrigeration (advantageous)
Welding experience (beneficial)
Must reside in Cape Town - able to commute to Brackenfell.
Send your CV to reception@personastaff.co.za
Persona Staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
reception@personastaff.co.za
2d
1
SavedSave
Are you a qualified Electrical Technician
who is proficient in installing electrical metering systems
and current transformers.
Do you consider yourself to be goal orientated? Then apply today!
Requirements:
A qualified electrician with minimum N4 qualification.
At least 2 years metering related experience.
Fully bilingual (Afrikaans and English)
Excellent client service skills
Driver’s License
Timekeeping and planning
Good verbal and written skills
Computer literate
Deadline and goal orientated.
The ability to work under pressure.
Responsibilities:
Technical audits on properties
Examine under recoveries from a technical perspective.
Make technical drawings of metering reticulation of examined properties.
Installation of electrical metering equipment.
Calculate / forecast recoveries.
Stock management
General administrative tasks
To apply, please send your CV to liza-nelle@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful. Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004653/LN&source=gumtree
2d
1
SavedSave
Our client in the agricultural sector is seeking an Automation Technician to join their team. This role will report directly to the Technical Manager.
Duties & Responsibilities:
Development of AutoCAD drawings and design.
Assist with technical projects and Beta Sites as and when needed.
Assist with assembly.
Automation of irrigation dosing units.
Assist with controllers in cabinets with protection devices.
Assist with assembly of radio units.
Testing software and hardware.
Wiring of cabinets and panels
Troubleshooting of controller hardware and software.
Assist with telephonic support to dealers and end users.
On-Site support to dealers and end users â?? South Africa and SADC Countries.
Training on DF products, training dealers and end users on the correct usage of the automation equipment.
Assist with the servicing of filter banks and back flush controllers.
Requirements:
Matric certificate.
3+ years in a similar role.
Must have good communication skills in English and Afrikaans.
National diploma or degree in electronics/mechatronics.
Drivers license.
ELV electrical systems and VSD/PLC.
An understanding of hydraulics
AutoCAD knowledge.
Problem solving and organizational skills.
To apply, please send your CV with your salary expectations to hannah@personastaff.co.zaPlease note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. By applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request our POPI Act Policy.
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004596/H&source=gumtree
2d
1
SavedSave
Our client in the agricultural sector is seeking an Automation Technician to join their team. This role will report directly to the Technical Manager.
Duties & Responsibilities:
Development of AutoCAD drawings and design.
Assist with technical projects and Beta Sites as and when needed.
Assist with assembly.
Automation of irrigation dosing units.
Assist with controllers in cabinets with protection devices.
Assist with assembly of radio units.
Testing software and hardware.
Wiring of cabinets and panels
Troubleshooting of controller hardware and software.
Assist with telephonic support to dealers and end users.
On-Site support to dealers and end users – South Africa and SADC Countries.
Training on DF products, training dealers and end users on the correct usage of the automation equipment.
Assist with the servicing of filter banks and back flush controllers.
Requirements:
Matric certificate.
3+ years in a similar role.
Must have good communication skills in English and Afrikaans.
National diploma or degree in electronics/mechatronics.
Drivers license.
ELV electrical systems and VSD/PLC.
An understanding of hydraulics
AutoCAD knowledge.
Problem solving and organizational skills.
To apply, please send your CV with your salary expectations to julia@personastaff.co.zaPlease note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. By applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request our POPI Act Policy.
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004618/JH&source=gumtree
2d
1
SavedSave
Our client in the Northern Suburbs is looking for a qualified Electrical Technician
to join their team.
Responsibilities:
Technical audits on properties
Examine under recoveries from a technical perspective.
Make technical drawings of metering reticulation of examined properties.
Installation of electrical metering equipment.
Calculate / forecast recoveries.
Stock management
General administrative tasks
Requirements:
A qualified electrician with at least N4 qualification.
At least 2 years metering related experience.
Fully bilingual (Afrikaans and English)
Excellent client service skills
Driver’s License
Timekeeping and planning
Good verbal and written skills
Computer literate
Deadline and goal orientated.
The ability to work under pressure.
To apply, please send your CV to hannah@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful. Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004242/JH&source=gumtree
2d
1
SavedSave
Our client in the Northern Suburbs is looking for a qualified Electrical Technician
to join their team.
Responsibilities:
Technical audits on properties
Examine under recoveries from a technical perspective.
Make technical drawings of metering reticulation of examined properties.
Installation of electrical metering equipment.
Calculate / forecast recoveries.
Stock management
General administrative tasks
Requirements:
A qualified electrician with at least N4 qualification.
At least 2 years metering related experience.
Fully bilingual (Afrikaans and English)
Excellent client service skills
Driverâ??s License
Timekeeping and planning
Good verbal and written skills
Computer literate
Deadline and goal orientated.
The ability to work under pressure.
To apply, please send your CV to hannah@personastaff.co.za
      Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful. Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.Â
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004238/H&source=gumtree
2d
1
SavedSave
Our client in the agricultural sector is seeking an Automation Technician to join their team. This role will report directly to the Technical Manager.
Duties & Responsibilities:
Development of AutoCAD drawings and design.
Assist with technical projects and Beta Sites as and when needed.
Assist with assembly.
Automation of irrigation dosing units.
Assist with controllers in cabinets with protection devices.
Assist with assembly of radio units.
Testing software and hardware.
Wiring of cabinets and panels
Troubleshooting of controller hardware and software.
Assist with telephonic support to dealers and end users.
On-Site support to dealers and end users â?? South Africa and SADC Countries.
Training on DF products, training dealers and end users on the correct usage of the automation equipment.
Assist with the servicing of filter banks and back flush controllers.
Requirements:
Matric certificate.
3+ years in a similar role.
Must have good communication skills in English and Afrikaans.
National diploma or degree in electronics/mechatronics.
Drivers license.
ELV electrical systems and VSD/PLC.
An understanding of hydraulics
AutoCAD knowledge.
Problem solving and organizational skills.
To apply, please send your CV with your salary expectations to natasha@personastaff.co.za  Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. By applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request our POPI Act Policy.
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004608/N&source=gumtree
3d
1
SavedSave
MILLWRIGHT
TECHNICIAN
Cape Town
Food Manufacturing Sector
Responsible
for the efficient mechanical and electrical installation as well as for
Maintenance, Fault Finding and Breakdowns on fast moving production machines,
with in a world class working environment.
Responsible for the good engineering practices and complying
to the appropriate safety standards and relevant codes of practice
Requirements:
üMillwright trade test Certificate
üN4 MIN
ü3 YEARS experience
gained with in a Bakery Food manufacturing environment
üExcellent fault finding skills
in electrical and mechanical areas
üExcellent
communication in English (written and verbal)
üLive in Cape Town
üAble to travel from time to
time
üValid SA ID Book
Apply
via this advert with your CV or call Cora on 021 556 2929 or 0842182237
If
you had no response from your application in 2 weeks you were unsuccessful
17d
Our company is looking for a Light Current
Electrical Technician to provide essential services in our LED Lighting Manufacturing
facility. Location: Cape Town, Montague Gardens DUTIES & RESPONSIBILITIES,
NOT LIMITED TO:1. Service Department Technician2. Technical support3. LED Lighting Installations 4. Communicating solutions for production challenges with quality assurance.Establishing preventative maintenance methods.Analyzing machinery and tools to report faults or broken items.Identifying problems with production or manufactured goods.Ensuring materials are available for production manufacturing.REQUIREMENTSFormal Education and
Experience: Matric (Grade 12) Diploma/Degree in Electrical Engineering (Light
Current) or equivalent.2 or more years’ experience in the same or similar role. Required skills and competencies:Strong attention to detail and ability to
prioritize tasks effectively and work under pressure. Capable to work
independently and handle multiple tasks. Experience with soldering and
de-soldering on PCB’s (SMD and DIP packages). Follow standard operating
procedures and protocols.Strong understanding of electronic circuits and components.Electronic repairs, component level fault finding and repairs on
PCB’s. Hardware testing and verifying according to design specifications. Proficient in reading and interpreting technical diagrams, PCB schematics.Good communication skills, written and verbal. Job Type: Full-timeEmail your CV to zaidah@mstled.co.za Salary: To be
discussed/negotiated during interview
21d
My client
provides services to operators of large utility scale solar projects. My client
has an opportunity for a field technician to join the team.
Job
Description
Office based work which includes:
administration, report writing and working with meteorological
instruments
and data loggers;
Remote on-site field work and work on utility
scale solar plants;
The candidate will travel every second week
to a site (typically for 5 consecutive days);
Manage projects (from travel arrangements to
execution of work on site and client liaison);
My client will provide all the required
in-house training.
Minimum
requirements
Diploma in mechatronics or electrical
engineering and relevant technical experience,
Good English proficiency,
Valid driver’s License,
Own reliable transport,
Excellent health,
The following
will be beneficial but not a requirement
Previous experience with data loggers,
meteorological equipment, solar sensors or calibrations in
general.
Two years previous work experience (of any
nature).
Strong report writing skills (attention to
detail).
Preference will be given to candidates who
currently reside within the Western Cape.
The candidate
that we are looking for will have the following characteristics
Meticulous attention to detail
Self-motivated to 100% task completion
Proactive problem-solver
Disciplined work ethic
Enthusiastic for frequent travelling
Strong independent worker (the candidate
typically travels to sites on their own)
Hands-on / practical
Applications
without the following information will be rejected
Filled in Applicant Form (see next page);
Detailed CV including a recent photo;
Academic records;
At least two references (with main and
alternative contact numbers and email address) – more than
two
references are preferred;
Details on previous work experience
(including holiday or casual work);
Salary expectation.
Who should
apply for this position?
Young technicians that are looking to start a
career of seeking a career change and join a small and
energetic
company that provides services in the fast-expanding field of Solar Energy.
Candidates that enjoy travelling and working
in remote locations and who can work independently.
This position
requires the candidate to be in the field at least 2 weeks per month (every
second week:
one week in
the office and one week on site).
People with an eagerness to learn and who are
self-motivated.
Who should
not apply for this position?
Candidates that plan to study part time and
require to attend classes in person (the travel schedule
does not
allow for this).
Candidates that prefer an office based
(non-travel) position.
Candidates that are unable to commute
reliably to Stellenbosch daily.If you meet
the requirements, please send your CV with availability and salary expectations
to hrkonsult@live.co.za.
1mo
A well-established business is seeking to appoint a Telescope Engineering Manager
Qualifications preferred:
B-Tech (+9 years experience) in electronics/electrical/mechanical engineering or similar equivalent relevant
BSc. /B.Eng Degree (+8 years experience) in electronics/electrical/mechanical engineering or similar equivalent relevant
PhD or Masters Degree (+7 years experience) in electronics/electrical/mechanical engineering or similar equivalent relevant
Must be registered or eligible for registration with ECSA as a professional engineer or technologist.
Government certificate of competency (GCC) is desirable
Experience:
B-Tech coupled with 9+ years experience in leading and managing complex engineering and large scale high-technology projects with a proven record of delivery
BSc./BEng Degree coupled with 8+ years experience in leading and managing complex engineering and large scale high-technology projects with a proven record of delivery
PhD or Masters Degree coupled with 7+ years experience in leading and managing complex engineering and large scale high-technology projects with a proven record of delivery
Broad domain understanding of technologies and methodologies relevant to Radio Astronomy (Antennas/Receivers, Cryogenic cooling systems, control systems, mechanical systems, electrical systems)
Extensive domain knowledge of at least one of the technologies that is fundamental to Radio Astronomy (Mechanical Structures, Digital Electronics, Digital Signal Processing, Radio Frequency Electronics, High Performance Computing, and Electrical Power Systems).
Knowledge:
Structure and manage a team of engineers and technicians that will be able to deliver on projects assigned to the engineering division and engage strategically and technically with stakeholders.
Set, communicate and implement long term strategies for the Engineering Division to ensure a transformed and internationally recognized Radio Astronomy Instrumentation capability is sustained within SKA-MID.
Exercise a substantial degree of independent professional responsibility and discretion, working to broad parameters and policy guidance
Manage and participate in multi-disciplinary projects
Monitor and report on financial, schedule and technical status of their projects
Manage budgeting process for the Engineering Division and monitor and control of expenditure against allocated budgets
Set quality and professional standards and ensure quality assurance is maintained on their programs
Facilitate effective communication and work flow both internally and externally
Please note that if you have not received a response within 14 days of submitting your application that your application was unsuccessful. However, please keep a lookout on our website, www.sixsense.co.za for available positions which may be inline with your career aspirations.
SECTOR: Engineering & Technical
Job Reference #: SSC000521/MS
2mo
Successfully Added to List
View and manage your saved ads in your account.