Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Results for mechanical diploma in Engineering & Architecture jobs in East Rand
1
A national logistics provider (specialising in A-grade warehousing and transport logistics) is looking for an experienced Senior Diesel Mechanic & Fleet controller, a physically fit candidate with excellent attention to lead the maintenance and repair of linehaul and smaller, local vehicles. The primary duties include all servicing and maintenance, performing physical, visual and diagnostic tests to find faults, analysing results and repairing or replacing all vehicles parts including engine, steering, transmission, braking or lighting system components.
The ideal candidate needs to be highly organized and communicate effectively, as they will be expected to maintain detailed records of serviced vehicles and interact with Ops for co-ordination of resources. This position is based in the head office in Pomona, Kempton Park, Gauteng.
* Follow a checklist of inspection procedure
* Running and analysing various tests on vehicles
* Do routine maintenance, such as changing oil, checking batteries, and lubricating equipment and parts
* To carry out routine servicing
* Attending to Breakdowns
* Adjust and align wheels, tighten bolts and screws, and attach system components
* To be able to diagnose and repair faults in Diesel engines and Hydraulic systems.
* Replacing vehicle engines, steering mechanisms, transmissions and braking systems.
* Checking vehicle lighting systems.
* Test driving vehicles to gauge performance.
* Performing preventative maintenance on service trucks.
* Maintaining detailed records of serviced vehicles.
* Adhering to an inspection procedure checklist.
* Maintaining a parts inventory.
* Ensuring the cleanliness of the shop.
* Report into and plan with Management for the co-ordination of resources
* Maintain tools and environment
* Travel to branches as necessary
* Ensure all vehicles on the road meet all necessary Road Traffic Regulations
* Degree or Diploma in Mechanical or Automotive Engineering
* ASE Diesel Certification
* Fitter / Diesel Mechanic Trade Test Certificate
* Experience in 3PL environment
* Knowledge of Road Traffic Act
* Able to work afterhours and weekends as required
* Demonstrate initiative and creative problem-solving skills
* Good fault finding, electronic diagnostic skills
* Valid drivers license- code 10 and 14
* Aptitude for mathematics and science.
* Advanced knowledge of diesel engine components.
* Good IT and diagnostic skills.
* Physically fit and able to lift to 150 pounds.
* Proficiency with maintenance and repair tools
* Microsoft Word and Excel skills
* Attention to detail.
* Good interpersonal skills.
* Excellent verbal communication skills.
* Good organization skills
* Good problem-solving skills
* Own transport is essential
* Reliable
* Hardworking and trustworthy
R240 000 - R360 000 p/a based on candidates’ experience
* Degree or Diploma in Mechanical or Automotive Engineering
* ASE Diesel
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzIzNzczX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1184477&xid=1555_23773
2y
1
SavedSave
*Reference: JHB001495-AVW-1*
Our client a manufacturer of bearings and power transmission products is seeking a Sales Engineer (Mechanical (degree/diploma). Previous experience in selling Bearing, Values, Gearboxes, couplings, or related products required.
Please note this vacancy is only AA/BEE
* 4-6 years experience in a related Service & Sales function within a manufacturing/industrial industry;
* Solid market and sales knowledge of the SADC region (A MUST) as well as uncharted countries in the region.
* Project/contract management experience
* Computer literate (MS Office);
* Maintain the opportunity management project database (CRM);
* Fluent in English: the ability to compose own correspondence in English; (e.g. letters, reports, proposals, quotations);
* Ability to deliver presentations to customers at all levels in the organisation.
* Ability & Talent to engage with customers commercial & technical depts.
* Technical aptitude - ability to read mechanical engineering drawings and suggest application recommendation
* Ability to travel extensively. Travel 75% of the time in the SADC region - remote areas.
* South African citizens and residents with a work permit may apply.
R 650 - R 700 - Annually
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzY5MjEyX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1264164&xid=1555_69212
2y
1
Marketing & Communication Specialist – Boksburg
Specialist position required by a mechanical engineering import and sales company providing mines, industry and related companies with capital equipment such as industrial motors, industrial transmission, pumps, generators, compressors, crushing equipment, mining machines etc – marketing and communications experience gained with these industries
Minimum requirements:
* Marketing Diploma with a minimum of 2 years’ experience in Digital Marketing relating to social media, LinkedIn etc / Engineering and Mining Magazine and social media advertising and editorial / Project Management – Industrial and mining exhibitions, golf days, client days
* CRM systems management
Salary offer: Negotiable dependant on qualifications and experience
Minimum requirements:
* Marketing Diploma with a minimum of 2 years’ experience in Digital Marketing relating to social media, LinkedIn etc / Engineering and Mining Magazine and social media advertising and editorial / Project Management – Industrial and mining exhibitions, golf days, client days
* CRM systems management
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI1MTEzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1187460&xid=1555_25113
2y
1
SavedSave
We are looking for a senior technical internal sales person to join our Boksburg office team, reporting to the Operations Director.
*Successful person will:*
* Have a mechanical /Instrumentation background dealing with flow related equipment / instrumentation.
* Have a min. of 5 years’ internals sales experience in a senior position. Will be required to supervise two (2) other staff.
* Have very good computer experience using MS Office including MS Word, Excel and Outlook, Syspro ERP/Inventory and sales packages. Syspro knowledge will be advantageous.
* Have proven experience in handling sales calls with technical back up.
* Be able to work accordingly & professionally with our clients Sasol, Sappi, Anglo, etc.
* Have excellent communication at all levels.
* Must enjoy working in an office.
* Candidate must reside in Gauteng area, 25-30 kms from the airport.
Technical Diploma
5 yrs Internal Sales Experience
Must have supervisory experience
*Our package includes:*
* Competitive basic salary
* 13th cheque performance related
* Commission based on the branch performance
* Provident fund
* Medical aid
Technical Diploma
5 yrs Internal Sales Experience
Must have supervisory experience
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzQ5OTQ5X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1236233&xid=1555_49949
2y
1
My client, a leading manufacturer of pumps and valves, is looking for two Engineering Technicians to join their team in Germiston, Gauteng.
Duties will include, but are not limited to, the following:
* Has the unit responsibility to ensure that equipment manufactured and supplied complies to specification/order and is fit for purpose
* Engineer and modify bills of material according to data sheet/ order
* Loading of materials and purchase items for pump projects on SAP
* Liaise with the drawing office
* Supply data to draughtsman and ensure drawings are in accordance with the data sheet specifications, expedite drawings from draughtsman
* Handle internal queries from sales, purchasing and production departments
* Ensure the efficient and effective engineering of all non - standard bills of materials and their associated functions
* Enter non-standard and standard jobs on to SAP system
* Complete customer and project specific documentation
* Handling all queries from customers/suppliers
* Verify scope of work, provide milestone dates on engineering deliverables to support project schedule
* Read, check and generate drawings/ documents
* Update and check Material Master Numbers
* General enquiries with suppliers
* Verify pump and material selection, performance, mechanical seal selection and auxiliaries
* Comply with and enforce all company policies and procedures, assist fellow employees with daily functions as and when required
* Carry out all other reasonable tasks that may be delegated from time to time
REQUIREMENTS:
* Minimum - National Diploma Mechanical Engineering
* Mechanical experience on plant and pump set package engineering
* Experience of 5 years in pump, motors, mechanical seals, drawings, planning, pump, selection, design, installation and maintenance
* Experience on Multistage pumps would be an added advantage
* Computer literate.
* SAP experience
* Solid Edge or similar 3D Cad / Mechanical Design - Advantageous
* Experience on FEA (Finite Element Analysis) / CFD (Computational Fluid Dynamics) - Advantageous
* ECSA Registration - Advantageous
*Desired Skills: *
* technician
* engineering
* pumps
* mechanical
* SAP
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU0Xzk0MTFfXzQ5Nz91dG1fc291cmNlPWd1bXRyZWUmdXRtX21lZGl1bT1mZWVkJmtleXdvcmQ9&jid=1184290&xid=1554_9411
2y
Ads in other locations
1
SavedSave
Looking for a External Technical Consultant!!!
Isando
Skills Requirements:• Grade 12 (Matric) 8 N5 certificate• Mechanical Engineering Diploma/Degree• Minimum 5 years’ experience in the hydraulics industry• Good understanding of the hydraulics industry• Technically minded• Technical background• Excellent interpersonal skills• Good problem solving skills• High ethical standards• Valid Driver’s license
Salary R25 000 CTC
Email CV to bernadette@prrrecruitment.co.za
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS80MTU2Nzc1MTg5P3NvdXJjZT1ndW10cmVl&jid=1506022&xid=4156775189
3d
1
SavedSave
REPORTING TO THE GLOBAL SALES AND BUSINESS DEVELOPMENT MANAGERJOB PURPOSE:To assist regarding BD work pertaining to customers, process and business decision making. To develop metallurgically robust, costeffective solutions and equipment selections f...Diploma in engineering (mechanical/metallurgical), Sales and marketing tertiary qualification advantageousAt least 5 years’ sales experience in Africa. Work exposure in a process plant is advantageousFrench speaking advantageous, good communication skills, customer focused, quality orientated, persuasive, builds strategic working relationships, innovative and problem solverProficient in Microsoft Office Suite (MS Word, Excel, PowerPoint and Outlook)
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18yOTJfMjQyODI5X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1178166&xid=292_242829
2y
1
Software Company based in Johannesburg, is looking for an Autodesk AEC Build Technical Consultant, to start as soon as possible.
External & Internal roles include:
* Product Training
* Product presentations
* Software and Workflow Implementation
* Product Support Research
* Project Management
* Design Services
* Technical Consulting
Area of influence:
* Autodesk AEC (Architecture, Engineering & Construction)
Minimum requirements:
* Autodesk AutoCAD – 3 Years (Intermediate Level)
* Autodesk Revit – 5 Years (Advanced Level)
* Autodesk BIM Products (Docs / Collaborate Pro / Build) – 2 Years
* Degree / Diploma / or relevant qualification
Other requirements:
* BIM Implementation Experience an advantage (BEP / EIR, Template creation, etc)
* Knowledge of advanced BIM workflows an advantage
* Exposure to multiple Build (Architecture, Mechanical, Electrical, Civil, Structural) industries an advantage
* Technical knowledge of computers an advantage
* Excellent work ethic and communication skills
– Excellent work ethic and communication skills
– Must be a team player
– Must have a passion for Building and BIM Software
– Must reside in South Africa
– Must have own vehicle for work use
– Full time – Monday – Friday, 8am – 5pm
– To start as soon as possible
Salary + Benefits (This will be determined based on the individual and their previous expertise)
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI0MTQ4X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1184673&xid=1555_24148
2y
1
Calderys is a wholly-owned subsidiary of Imerys, the world leader in mineral-based specialties for industry. Calderys is a global network of industry-leading experts working in close collaboration with our customers to provide personalised refractory solutions.
A vacancy exists at *Calderys, Vereeniging* for* *a *Project Manager* reporting to the* Sales and Marketing Manager.*
*Purpose of the Role: *
Responsible for project planning,organising, and directing the completion of projects for the organisation while ensuring these projects are on time, on budget and within scope. This includes tendering, negotiation, planning & execution of projects as well as liaising with clients during execution for several projects simultaneously.
*Key Tasks and Responsibilities: *
* Manage complete project cycle from tender process to final invoicing and payment
* Project planning including labour, equipment and consumable allocation
* Manage project team as allocated per project during execution phase
* Liaise with Calderys & clients during project execution
* Stringent cost control during project execution
* Ensure recon of project, confirm project invoicing and follow-up of payment from customer
* Report on an ongoing basis project performance as well as monthly performance reporting
* Operational objective in line with EHS, quality, cost and reliability
* Responsible for multiple clients on different segments and able to conduct business reviews with clients
* Liaising with Calderys global project centre of excellence
* Maintain and monitor project progress and proactive reaction to correct or improve
* Maintain complete document control of all project related activities
*Job Specifications- Education and Experience Requirement: *
* Diploma or Degree in Civil, Mechanical, Metallurgy Engineering or equivalent
* Refractory experience and installation background would be an added advantage
* Minimum 5 years project management experience in multidisciplinary projects such as petrochemical, iron & steel, cement and power
*Knowledge, skills, abilities and other characteristics:*
* Proven track record of innovative thinking & continuous improvement of project sales cycle
* Strong knowledge of compiling and managing project forecasting and budget
* Well versed with Google Suite and / or Microsoft
* Good communication skills on project employee level as well as higher level engineers and project managers on client sites
* Capable of managing projects with a labour contingent of up to 60 employees, with assistance from site supervisors
* Able to train and coach supervisors for improved performance
* Good team player along with strong verbal communication and interpersonal skills
* Willing to travel 75% locally* *
*Job Specifications- Education and Experience Requireme
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzIzMjM0X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1181851&xid=1555_23234
2y
1
SavedSave
A Powerhouse in the Electrical Engineering field is seeking a dynamic Projects Engineer to join their team. The successful candidate will need to ensure that assigned projects are executed accurately and timeously. The successful candidate will need to focus on continuously improving internal systems and procedures, monitoring engineering developments and new projects within the engineering sector, as well as monitoring motor developments by competitors.
In order to be considered for the positon you MUST meet the below requirements:
* Matric with minimum N3 certificate or previous experience in the field of electrical motor products.
* Diploma (Electrical or Mechanical).
* Contract Management experience.
* Proficient in Microsoft Office software.
* Drivers licence
Duties & Responsibilities:
* Assist in order hand-over process between Proposals to Projects departments.
* Compile and submit data packs for each project handled.
* Continuously keep the customer well-informed of progress and delivery expectations.
* Continuously update cost calculations through the project to determine accurate margins.
* Co-ordinate and attend witness testing of project motor orders.
* Facilitate and assist with project related debtor issues where needed.
* Interact with the customer in terms of project, kick-off and site meetings.
Should you meet the above criteria, please send your CV to (admin@afrikye.co.za)(mailto:admin@afrikye.co.za)
*Disclaimer:* Should you not hear from us within 2 weeks please consider your application unsuccessful.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI0Mjk1X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1184768&xid=1555_24295
2y
1
SavedSave
My client a leading manufacturer and supplier of conveyor belt solutions to the mining and bulk material handling industries is looking for a Millwright/ Toolmaker/ Electromechanical Technician, the successful incumbent will be responsible for mechanical design, developing, testing, and manufacturing devices, tools, and machines.
*Minimum requirements*
* Assist with mechanical design, develop, test, and manufacture devices, tools, and machines
* Milling and turning of parts
* Develop, manufacture, and assemble mechanical parts for industrial machinery and equipment
* Maintenance of CNC machines, presses, gearboxes, pumps, hydraulic and pneumatic equipment.
* Schedule maintenance, mechanical system, carry out minor and major repairs.
* Keeping records of operations and maintenance procedures.
* Time management
* Diagnosing and repairing faults with tools and machinery and performing regular maintenance.
* Operating specialized tools and machinery.
* Assembling fabricated parts to produce tools and machines.
* Following safety protocols.
* Measuring and marking out materials for fabrication.
* Setting up tools and machinery for fabrication process.
* Monitoring fabrication process and adjusting settings when necessary.
* Perform fault finding on machinery
* Maintain standards in the plant and adhere to all safety rules and procedures
* Maintain production machines, electrically/mechanically driven machines, (preventative maintenance schedule)
* React to breakdowns expediently
*Qualifications*
* N5 or N6 in mechanical or electrical with mathematics
* Matric
* Trade Certificate in Millwright (Electromechanician)
* Diploma in Mechanical Engineering
*Skills:*
* Basic CNC programing G-Code
* Electric & Electronic control systems
* Mechanical equipment automation
* Excellent Communication Skills (Bilingual a bonus)
* 5 Years relevant experience (Mechanical, Electrical, Robotics)
+/- R 30,000 Gross and pension
*Minimum requirements*
* Assist with mechanical design, develop, test, and manufacture devices, tools, and machines
* Milling and turning of parts
* Develop, manufacture, and assemble mechanical parts for industrial machinery and equipment
* Maintenance of CNC machines, presses, gearboxes, pumps, hydraulic and pneumatic equipment.
* Schedule maintenance, mechanical system, carry out minor and major repairs.
* Keeping records of operations and maintenance procedures.
* Time management
* Diagnosing and repairing faults with tools and machinery and performing regular maintenance.
* Operating specialized tools and machinery.
* Assembling fabricated parts to produce tools and machines.
* Following safety protocols.
* Measuring and marking out materials for fabrication.
* Setting up tools and machinery for fabrication process.
* Monitoring fabrication process and adjusting settings when necessary.
* Perform fault finding on machinery
* Main
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzIxMTUwX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1175476&xid=1555_21150
2y
1
SavedSave
Grade 12 with tertiary qualification: BSc Engineering / B Tech/ National Diploma in Mechanical / Electrical Engineering GCC (Government Certificate of Competence)Minimum 5 years in facilities / Maintenance Management, Engineering principle, Inventory ManagementEnsure continuous operation of the facility and all production equipmentMaintain the plant in a SAHPRA complaint state at all timeDetermines the required staff complement to adequately man the department, recruits andappoints staff as required Effectively manage the Engineering staffDevelops key personnel to function effectively and ensures adequate back-up and successionplanning within EngineeringPrepares expenses and Capex budgets for the financial year in line with the Companystrategic plan Monitors and controls the Engineering monthly expenditure to ensure adequate use ofEnsures that cGMP requirements are applied in all areaswhere appropriate Ensures records are maintained to provide evidence of conformity to requirements and of the effectiveOperation of the Quality Management System Ensures that the required verification, validation, monitoring, inspection and test activities specific to theequipment are in placeEnsures that suppliers are selected in accordance with procurement standardsPrepares for and participates in the external audits that are conducted at planned intervalsEnsures that the necessary corrective action is taken to eliminate the cause of non-conformities in
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18yOTJfMjQxNzc0X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1165531&xid=292_241774
2y
1
SavedSave
SKILLS & QUALIFICATIONS: Must have an engineering degree/diploma – B.Eng/B.Sc or equivalentExperience using Microsoft Office Suite (Word, Excel, PowerPoint, and Projects)Proficiency in AutoCAD and other engineering design programs like AFT Fathom etc.10 or more years of experience working as a process engineer.Committed self-starter with the ability to work independently to meet project schedules and goals.Ability to apply engineering techniques commonly used in industrial capital projects, such as piping/pump hydraulic calculations, sizing and specification of pipes/pumps, heat transfer, safety relief systems and sizing and specification for process equipment.Experience with process hazard analysis and risk assessment reviewsExcellent written and oral communication skills Listening and communication skills; must be able to communicate plans, thoughts, and rationale to teammatesProblem-solving skills, especially the ability to identify the source of the problem and create and test solutions DUTIES & RESPONSIBILITIES: Define, organize, execute, and coordinate process engineering scope/assignments for clients primarily in the minerals and water processing environmentPerform process engineering design for client projects including but not limited to piping systems, pump hydraulics, tank and vessels, heat transfer, controls equipment and process equipment.Develop project deliverables for client including PFD’s, P&IDs’, heat and mass balances, basis of designs, schedules, project estimates, bid document, equipment specification and the like.Plan and organize project work together with multidisciplinary team including electrical designers, mechanical designers, civil/structural designers, procurement, and administrative staff supporting those assignments.Research, design and specify equipment, controls, and process for chemical, mechanical, hydraulic, and other industrial systems. Provide on-site construction management assistance during installation, commission and start-up of equipment and related systems.Travel required and/as dependent on the project and client needs.Exercise creative thinking to devise new systems and innovative ways to workUnderstand complex mineral and water processes analysis to design and troubleshootUnderstand electrical and mechanical concepts for incorporation into the processes Use standard equipment and tools necessary for the roleWork well with a team to develop systems for fixing problems or create solutions to get the job doneManage time, supplies, personnel, and budgetPlease note that if you have not received a response within 14 days of submitting your application that your application was unsuccessful. However, please keep a lookout on our website, www.------ for available positions which may be inline with your career aspirations.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18yOTJfMjQwNDY4X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1154883&xid=292_240468
2y
1
SavedSave
*Reference: PS009553-JL-1*
A large international engineering company supplying Process Equipment to multiple industries needs a strong Project Manager experienced in managing multiple projects efficiently and on time to join them at their Johannesburg based office.
*Minimum requirements for the role:*
* Minimum Mechanical Engineering Diploma with PMP Certification essential.
* Minimum of 5 – 10 years’ experience in Project Management is essential.
* Six or more years of experience in systems related activities in both management and non-management positions.
* At least eight years in related technical/business /engineering experience.
* Highly skilled and experienced in a broad spectrum of Project Management tools and methodologies.
* Competent in estimating, planning, tracking and reporting progress while effectively managing project change acquired through actual hands-on Project Management experience.
* Competent in assessing and managing the elements of project risk and in recognising, analysing and solving problems.
* Effective communications, both verbal and written, and ability to negotiate with clients in a variety of business situations.
* Ability to provide strong leadership and management direction to the Project Team and must be capable of building strong inter-personal relationships with all individuals involved with the project.
* Must have a valid driver’s licence.
* *Email CVs to *(jeff@talentsphere.world)(mailto:jeff@prostaff.co.za)
*The successful candidate will be responsible for:*
* Ensuring complete understanding of a client’s business and strategies, including business models.
* Establishing and monitoring project metrics to ensure the achievement of business benefit.
* Providing management direction by providing overall project plan and strategy.
* Ensuring kick-off meeting is held to officially launch the project.
* Managing development of technical solutions.
* Determining resource requirements, selecting team members and co-ordinating support functions.
* Building an appropriate Project Team.
* Tracking, monitoring and reviewing Project Team performance.
* Forecasting resource requirements based on current status.
* Resolving conflicts and issues between key team members.
* Maintaining high morale levels throughout the project.
* Assessing team member performance and providing management feedback.
* Managing resource plans.
* Developing a communications plan to ensure regular communications with the project sponsor and the Project Team.
* Developing proposals, statements of work and requests for proposals for sub-contractors and suppliers.
* Developing, documenting and owning the project plan including a milestone plan.
* Determining project scope by ensuring a project definition workshop is run and appropriate documentation is produced.
* Ensuring and coordinating quality management activities as laid out in the project’s Quality Management Plan.
* Securing a committed project team a
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI1NzIzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1190068&xid=1555_25723
2y
1
SavedSave
Pretoria Requirements:3 Years National Diploma in Mechanical/ Electrical or N6 with Trade certificate.Proficient in Kawasaki, Fanuc Robotics.Electrical and mechanical skills.Programming skills.Microsoft office knowledge (Word/PowerPoint/Excel/Outlook).Fault-finding ability.6 Sigma problem solving Methodology.Proper communication and escalationKnowledge of MOS Implementation.Knowledge of constraint management principles.Proficient in Siemens TIA Portal, Mitsubishi PLCsSEW, Simotion Controls and drivesBasic knowledge in Vision systems and scanners e.g. Cognex, Sick3-Years’ experience in Automotive industry3-Years’ experience in Maintenance backgroundMust have displayed proven capability of leading a team in current or previous roles Knowledge and Skills:Foster functional & Technical ExcellenceKnow and have a passion for our business and our customers;Demonstrate and build functional and technical excellence;Ensure process discipline;Have a continuous improvement philosophy and practice. Own Working TogetherBelieve in skilled and motivated people working together;Include everyone, respect, listen to, help and appreciate others;Build strong relationships/be a team player/develop ourselves & others;Communicate clearly, concisely and candidly. Role Model Ford ValuesShow initiative, courage, integrity and good corporate citizenship;Improve quality, safety and sustainability;Have a can do, find a way attitude and emotional resilience;Enjoy the journey & each other. Have fun – never at others’ expense. Deliver Results yearsDeal positively with our business realities, develop compelling & comprehensive plans while keeping an eye on the enterprise view;Set high expectations and inspire others;Make sound decisions using facts and data;Hold ourselves and others responsible and accountable for delivering results and satisfying our customers.Strong problem solving and conflict management skills Duties:Supporting Production with well-maintained facilities adhering to World Class Standards.Driving SQCDPME by understanding and consistently applying MOS standards and strategies.Validate and bridge operational needs to ensure Production line is running safely and smooth.Supervise, Coach and be responsible for Maintenance team.Analyze breakdown reports and implement corrective measures.Adhere to all safety rules and regulationsEnsure PM strategy is implemented and followed, PM’s are done with integrityInstall / repair equipment within the timing plan.Analyze the work performed by team to ensure good performance.Ensure efficient utilization of the team.Produce well defined reports when requested for future planning or to substantiate the progress of a task or project.Ensure the adherence to the Company Code of Conduct and Safety rules.Train subordinates to maximize productivity.Ensure the availability of the required spares for emergency and planned repairs+95% Equipment AvailabilityReduce breakdown Mean Time To Repair (MTTR) to 450minPM completion ratio of ( 97%No O
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzM2NzcwX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1146873&xid=1266_36770
2y
1
SavedSave
PretoriaRequirements:Mechanical/Mechatronics/Electrical National Diploma (S- course) or Mechanical/Mechatronics/Electrical Engineering B-Tech.4-5 Years Automotive experience with a preference of body shop experience.Read mechanical and electronic schematics to ensure adherence to specifications and standards.Extensive knowledge in robots, with a preference for Kawasaki and Kuka robots.Proven track record of robot programming projects.Must have extensive knowledge of a variety of robots and robotic applications i.e.; grippers, spot welders, CO2 welders, sealer systems.of robotic programming architecture AS / K-logicHands-on experience in weld guns and timers that includes parameters backing up fault-finding with a preference for Obara or Bosch.In-depth knowledge of spot-welding applications / parameters / setup / fault finding.Adroit in SCA sealer systems.Seasoned in PLC’s. Must be able to monitor, fault-find, modify and make improvements (Siemens / Rockwell).Proficient in automation networks including Ethernet, Profinet, Profibus, CAN-bus and wireless networks.Fault finding and continuous improvement execution and implementation6 Sigma Certified/TrainedDuties:This position is for an engineering controls specialist with an emphasis on robotic controls specialization.The responsible person will be required to develop, implement, monitor and maintain efficient automation controls processes.To specialize in the continuous improvement, troubleshooting and programming of PLC’s/ Robots as well as other automation equipmentWell versed in ISO 9000 / ISO 14000 / TS 16949.Initiates measures to improve equipment performance, methods and quality.Manage all software and hardware installed on different types of equipment.Ensure minimal downtimes, proper documentation, software backups and version control.Robot programming, fault finding design changes.Continuous robotic improvement of weld quality, sealer quality and location accuracy.Installation of new equipment with regards to robots includes the initial setup of the robot and the parameters thereof. The setup and calibration of the weld gun. The parameter setup and programming of sealer systems. To commission and delegate newly installed equipment.Reporting / presenting and escalate to management as needed.Responsible for preventive maintenance updates on the robots and related equipment.Optimization of preventive maintenance jobs based on break down analysis and findings.To lead, set up and participate in cross-functional team meetings.The propensity to take the lead in any breakdown situation.Design, fault find and program using PLCs, HMI and SCADA.Ability to read blueprints, AutoCAD, E-Plan, interpret and modify electrical schematics.Performs other work-related duties as assigned.Must be prepared to work shifts, and overtime as required.Train and develop training documentation for maintenance personnel.Improve body shop equipment uptime using data analysis and preventative maintenance planningUndertake r
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQzMTQzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1157051&xid=1266_43143
2y
1
SavedSave
*Reference: DUR001460-CW-1*
*DUR001460 – Engagement Lead/ Project Manager (Sandton)*
*Purpose of the Job:*
To be part of a team to design, test, analyse and report on new Mining Equipment
To implement the SIMS system, guided by the delivery roadmap
*Required Qualifications*
* Engineering Degree / Diploma is required (E.G.Industrial, Electrical, Mechanical)
* Project Management - Essential.
* Software / Systems implementation – Ideal
*Technical Competencies & Experience:*
At least 5 years with;
* Previous Mining Exposure
* System optimisation Exposure
* Project Management Exposure
* Good knowledge of data analytics and reporting
* Excellent computer skills, Excel, MSWord, PowerPoint and PowerBI (Power BI is an
interactive data visualization software developed by Microsoft with primary focus on
business intelligence).
6.Good communication in English. Other languages will be an advantage
*Behavioural Competencies:*
* Able to identify issues and generates alternatives, evaluate at trade-offs.
* Thinks expansively to tackle problems and opportunities.
* Seeks to understand clients and build collaborative relationships
* Communicates time frames, gathers information on progress, evaluates results.
* Copes effectively under pressure or opposition (time or ambiguity).
* Ensures high quality output to required timelines.
* Consistently maintaining and disseminating high levels of energy to drive activity or productivity.
* Presenting ideas effectively to individuals/groups and tailoring to the needs of the audience.
* Results driven.
* *
*IMPORTANT* –
*Only* shortlisted candidates meeting the above criteria will be considered. If you do not hear from us within two weeks of applying, please consider yourself unsuccessful
R Annually
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzM2NjdfXzQ5Nz91dG1fc291cmNlPWd1bXRyZWUmdXRtX21lZGl1bT1mZWVkJmtleXdvcmQ9&jid=1135088&xid=1555_3667
2y
1
SavedSave
*Reference: TPO000133-KN-1*
Are you a Storeman looking to refine your experience in an organization that has been around for over 65 years?
My client is part of the foodservice industry with decades of business – building experience, their structure enables them to effectively communicate across the global structure allowing them to share best practices.
*Role:*
* Maintain & monitor stock levels – especially critical spare parts; request and submit quotes accordingly.
* Monitoring of consumables & requesting quotes for consumables.
* Interact effectively with employees at all organizational levels.
* Request quotes & present to assistant plant engineer for approval.
*Qualifications & Requirements:*
* Diploma/Degree in Industrial/Mechanical/Electrical Engineering.
* 3 years of experience in a similar role,
* Forklift license
* FMCG experience
* Knowledge of GMP, HACCP, Food safety, SOP, Pest control
* Ability to work in a plant environment for extended periods.
* Able to work in high humidity, high dust environment.
*We appreciate your interest, however if you have not had any response within 2 weeks from one of our consultants, we will place your CV on our database and contact you as soon as a suitable career opportunity for your skills and experience becomes available.
*
*Thank you and Good Luck!*
*Tech-Pro Recruitment*
R 400 000 - 420 000 - Annually
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzY3MTU2X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1260337&xid=1555_67156
2y
1
SavedSave
*Reference: PS009553-JL-1*
A large international engineering company supplying Process Equipment to multiple industries needs a strong Project Manager experienced in managing multiple projects efficiently and on time to join them at their Johannesburg based office.
*Minimum requirements for the role:*
* Minimum Mechanical Engineering Diploma with PMP Certification essential.
* Minimum of 5 – 10 years’ experience in Project Management is essential.
* Six or more years of experience in systems related activities in both management and non-management positions.
* At least eight years in related technical/business /engineering experience.
* Highly skilled and experienced in a broad spectrum of Project Management tools and methodologies.
* Competent in estimating, planning, tracking and reporting progress while effectively managing project change acquired through actual hands-on Project Management experience.
* Competent in assessing and managing the elements of project risk and in recognising, analysing and solving problems.
* Effective communications, both verbal and written, and ability to negotiate with clients in a variety of business situations.
* Ability to provide strong leadership and management direction to the Project Team and must be capable of building strong inter-personal relationships with all individuals involved with the project.
* Must have a valid driver’s licence.
* *Email CVs to *(jeff@prostaff.co.za)(mailto:jeff@prostaff.co.za)
*The successful candidate will be responsible for:*
* Ensuring complete understanding of a client’s business and strategies, including business models.
* Establishing and monitoring project metrics to ensure the achievement of business benefit.
* Providing management direction by providing overall project plan and strategy.
* Ensuring kick-off meeting is held to officially launch the project.
* Managing development of technical solutions.
* Determining resource requirements, selecting team members and co-ordinating support functions.
* Building an appropriate Project Team.
* Tracking, monitoring and reviewing Project Team performance.
* Forecasting resource requirements based on current status.
* Resolving conflicts and issues between key team members.
* Maintaining high morale levels throughout the project.
* Assessing team member performance and providing management feedback.
* Managing resource plans.
* Developing a communications plan to ensure regular communications with the project sponsor and the Project Team.
* Developing proposals, statements of work and requests for proposals for sub-contractors and suppliers.
* Developing, documenting and owning the project plan including a milestone plan.
* Determining project scope by ensuring a project definition workshop is run and appropriate documentation is produced.
* Ensuring and coordinating quality management activities as laid out in the project’s Quality Management Plan.
* Securing a committed project team and p
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI1NzIzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1190068&xid=1555_25723
2y
1
SavedSave
An Engineering company in Randburg is looking for a Commissioning Manager that is willing to travel within Africa.
Preparing of full commissioning documents for plants and systems
Participating on FAT for Equipment, MCC, Control Panels, SCADA and PLC for Various Process Plants and systems
Commissioning of plants or systems on site
Checking of installation works prior commissioning
Undertaking testing and commissioning activities in line with the specified site and design requirements
Installation assistance supervision on site
Preparing of projects closeout reports and obtaining necessary acceptance on various commissioning stages
Ensuring the safe testing and commissioning of completed installation to achieve the necessary plant performance in accordance with project programme requirements.
Monitoring progress, recording of all test results, witnessing final testing and acceptance of equipment / plants / systems.
Diagnose and repair faults on site while conducting Test Procedures
Input on system design improvements based on site commissioning feedback
Training of client systems / plants operators
Preparing of Datasheets – Instruments and Equipment
Participating on HAZOPs studies during design phase of plants, equipment and systems
Minimum Diploma in Engineering
Minimum 5 years of experience within material handling systems
Understanding of project management will be an advantage
Excellent communication skills
Able to work under pressure and outside of working hours
Efficient on Microsoft applications
Readings and understanding of drawings (P&IDs, PFDs, Mechanical Drawings)
Valid Driver’s licence
Willing to travel outside South African borders
R50 000 - R70 000CTC
Benefits to be negotiate
Minimum Diploma in Engineering
Minimum 5 years of experience within material handling systems
Understanding of project management will be an advantage
Excellent communication skills
Able to work under pressure and outside of working hours
Efficient on Microsoft applications
Readings and understanding of drawings (P&IDs, PFDs, Mechanical Drawings)
Valid Driver’s licence
Willing to travel outside South African borders
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzU1MTE5X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1242987&xid=1555_55119
2y
Save this search and get notified
when new items are posted!