Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Results for engineering manager in Engineering & Architecture jobs in Bryanston
1
The main duties associated with the position include the following:
Working with and receiving purchase requisition instructions from project managers and company managementPurchase requisition generation via Proman ERP systemPurchase order generation via Proman ERP systemEnforcing procedures and policies relative to the purchase requisition & purchase order processPrecisely coordinate transactions and communication between the accounts payable, project managers, suppliers and administrative assistantsVerify and ensure processing information is complete and accurate and captured in the required format in the correct fieldsManage purchase order status for each purchase order (Open, Partially Completed, Completed, Forced to Completion, Re-opened, Cancelled)Manage purchase order changes and cancellationsCommunicate in good time the updated purchase order status, changes or cancellations with all transacting partiesAdvise transacting parties on the correct disbursement code application for each purchase transactionGenerate purchase order reports for reconciliationProviding general administrative assistance to company management and accountantsEnsure that transactions are correctly approved with the appropriate authority before actioningReconciling differences in the supplier purchase order and invoicing transactions where requiredReport transaction irregularities to the finance managerActioning of ad-hoc general finance related instructions received from managementParticipating in the various finance department responsibilities toward the company as and when requiredEnsure responsibilities are always carried out in good time to meet deadlines
The requirements associated with the position are as follows:
Matric (mandatory) with good results plus tertiary qualification (advantageous)Previous ProMan software experience (advantageous) and Microsoft Office (mandatory)Minimum 3 years work experience in a similar role (mandatory)
Preference to candidates with the following skills and attributes:
Aptitude for figures with a good understanding of ERP system processesExcellent co-ordination and management of multi-party transactionsAbility to work under pressure with high volumes of transactionsAbility to self-check calculation workings and reconcile differencesAccurate with attention to detailWell organized and able to work as part of a teamApproachable and friendly with good people skills
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS81MTU0NzQ4MjQ/c291cmNlPWd1bXRyZWU=&jid=1513442&xid=515474824
2d
Ads in other locations
1
SavedSave
An Engineering company in Randburg is looking for a Commissioning Manager that is willing to travel within Africa.
Preparing of full commissioning documents for plants and systems
Participating on FAT for Equipment, MCC, Control Panels, SCADA and PLC for Various Process Plants and systems
Commissioning of plants or systems on site
Checking of installation works prior commissioning
Undertaking testing and commissioning activities in line with the specified site and design requirements
Installation assistance supervision on site
Preparing of projects closeout reports and obtaining necessary acceptance on various commissioning stages
Ensuring the safe testing and commissioning of completed installation to achieve the necessary plant performance in accordance with project programme requirements.
Monitoring progress, recording of all test results, witnessing final testing and acceptance of equipment / plants / systems.
Diagnose and repair faults on site while conducting Test Procedures
Input on system design improvements based on site commissioning feedback
Training of client systems / plants operators
Preparing of Datasheets – Instruments and Equipment
Participating on HAZOPs studies during design phase of plants, equipment and systems
Minimum Diploma in Engineering
Minimum 5 years of experience within material handling systems
Understanding of project management will be an advantage
Excellent communication skills
Able to work under pressure and outside of working hours
Efficient on Microsoft applications
Readings and understanding of drawings (P&IDs, PFDs, Mechanical Drawings)
Valid Driver’s licence
Willing to travel outside South African borders
R50 000 - R70 000CTC
Benefits to be negotiate
Minimum Diploma in Engineering
Minimum 5 years of experience within material handling systems
Understanding of project management will be an advantage
Excellent communication skills
Able to work under pressure and outside of working hours
Efficient on Microsoft applications
Readings and understanding of drawings (P&IDs, PFDs, Mechanical Drawings)
Valid Driver’s licence
Willing to travel outside South African borders
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzU1MTE5X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1242987&xid=1555_55119
2y
1
SavedSave
*Reference: FRP002150-KK-1*
Our client in the ICT sector is looking for a Maintenance Manager to manage the Maintenance division and staff.
*You will be responsible for:*
* Monitor, control and support service delivery by following & enforcing relevant processes throughout all service delivery engagements.
* Meet contractual obligations through consistent fulfilment of client specific Service Level Agreements (SLAs).
* Ensure timeous and accurate booking of time by all productive resources.
* Management of complaints and escalations within the framework of the relevant processes.
* Remove all obstacles to customer satisfaction and / or financial performance.
* Build and maintain effective business relationships with both internal and external customers with the objective of retaining customers and maintaining high customer satisfaction levels.
* Produce & communicate service performance reports to an agreed schedule or upon request to internal and external customers.
* Attend regular service review meetings with customer & account managers as agreed with account team.
* Ensure effective assignment of team members based on skill and customer requirements.
* Coordinate knowledge sharing between team members internally and members from other JE teams to ensure continuous learning and development of team members.
* Facilitate & encourage knowledge sharing across teams.
* Participate in QMS activities to ensure compliance across all service delivery disciplines i.e.
* Project Handover to Regional Support.
* Continuous participation in technical information sessions, ensure that skills and knowledge stay up to date.
* Actively participate in knowledge sharing activities to support a culture of continuous learning and development amongst peers and colleagues.
* Work performed meets customer expectations and follows appropriate delivery methodologies.
* Ensure that if there are internal or external escalations that the escalations happen as quick as possible and with all relevant information.
* Provide feedback for the continuous improvement of processes.
* Ensure that services provided to customers meet the service levels specified in the SLAs.
* Identify opportunities to improve the efficiency and effectiveness of service delivery.
* Oversee maintenance of QC standards;
* To liaise with management to provide answers and solutions to client specific requests.
*Qualifications and Experience:*
* NQF Level 5, minimum 120 credits equates to a National Certificate or Higher Certificate e.g. National Certificate Systems Support or Higher Certificate: Information Technology
* More than 5 years extensive experience in a Technical Management position, Customer Service Management or similar Management experience in the ICT sector.
**Please note that only short-listed candidates will be contacted**
R 20000 - Monthly
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzU1MDkyX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1242973&xid=1555_55092
2y
1
SavedSave
An Engineering Company in Randburg is looking for a Project Engineer
* Preparing, scheduling, coordinating and monitoring the assigned engineering projects.
* Monitoring compliance to applicable codes, practices, QA/QC policies, performance standards and specifications.
* Compiling of Engineering DATA sheets
* Interacting daily with the clients to interpret their needs and requirements and representing them in the field.
* Planning and forecasting of the project
* Generating of procurement schedules and acquisition of appropriate materials and equipment
* Liaising with contractors, suppliers and internal company stakeholders
* Keeping the project on schedule
* Keeping the project on budget
* Ongoing reporting of the project progress
* Ensuring that all aspects of the project proceed while adhering to internal company SOPs as well as external regulations and laws – this includes maintenance of project documentation
* Troubleshooting problems as they arise on a project – finding efficient and effective solutions
Experience on Turnkey Projects
Excellent people management and communication skills.
Able to use Microsoft Projects
Must have own car
3 years Project Management experience required
2 years mechanical engineering - diplomas required
Market Related
Experience on Turnkey Projects
Excellent people management and communication skills.
Able to use Microsoft Projects
Must have own car
3 years Project Management experience required
2 years mechanical engineering - diplomas required
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzU1MTE2X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1242986&xid=1555_55116
2y
1
To cover all aspects of Post-Sales, understanding of (Field Event) engineering and installation standard in order to implement them in field by engaging in visual/spot commissioning of installation, matching system selection report or drawings with the actual installation scenario, start-up the systems, troubleshooting and ensuring customer satisfaction at all times.
Technical Knowledge:
* HVAC Technical knowledge is a must (both product and installation).
* Must know HVAC basics Pressure-Enthalpy chart, Psychrometric chart.
* Can do cycle analysis with manual gauge as well as using software.
* Hands-on installation and troubleshooting experience on VRF, Splits is a must.
* Quick learner to understand Clients standards and implement them on site to ensure quality installation and stable operation.
* Knowledge of electrical components and its functioning.
* Instant technical problem identifier and derive solution to rectify the issue.
* Must be able to train the contractors/installer on site and in clients academy
Brand Image and Customer Management:
* Must work closely with contractors and installers, including onsite services to ensure that the system is running perfectly.
* Must respect customer and empathize their pain point(s).
* Willing to add more to his/her work to ensure customer satisfaction.
* Administered communication skill is necessary while interacting with the customer.
Reporting:
* Updating internal system by filling in field/project information in accordance to FE process.
* Maintain commissioning and start-up reports of all sites in format and share with contractors and relevant team member(s).
* To prepare presentations for common site issues/improvement scopes and report to Team Leader.
Diploma in Engineering.
3 – 5 years of Post-Sales experience.
Microsoft Office (MS Word, Excel and PowerPoint), CAD or/and Revit is an add-on.
Required Competencies:
? Highly motivated, outgoing personality with a focus on customer satisfaction.
? Problem solver.
? Excellent communication skills with the ability to maintain happy customers.
? Honesty, integrity and ethical conduct at all times.
? Passionate and self-driven.
? Communicate effectively, both orally and in writing.
? Able to attend to customers request on a short period or no period at times.
? Walk an extra mile to ensure the work is done in the stipulated time.
Basic + Benifits
Medical AID
provident fund
Insurance
Diploma in Engineering.
3 – 5 years of Post-Sales experience.
Microsoft Office (MS Word, Excel and PowerPoint), CAD or/and Revit is an add-on.
Required Competencies:
? Highly motivated, outgoing personality with a focus on customer satisfaction.
? Problem solver.
? Excellent communication skills with the ability to maintain happy customers.
? Honesty, integrity and ethical conduct at all times.
? Passionate and self-driven.
? Communicate effectively, both orally and in writing.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzU1MTU1X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1243010&xid=1555_55155
2y
1
Main Purpose of Job
Manage customer support and service and assume overall responsilbity for the success of the branch, including budgets and revenue targets as assigned.
Responsibilities:
Management of all the DAF retail branch activities ( inventory, parts sales, workshop and customer satisfaction)Develop and maintain customer relationships.Report on non-compliances and implement remedial actions.Implementation of policies and procedures.Jointly develop and train branch staff for future growth.Ensure profitability with monthly targets are achieved.Compile monthly branch reports and forecasts.Ensure compliance to strategic plans.Financial targets are achievedAchievement of regional sales targetsImplementation of effective control measuresCompliance to minimum CSI targets set for divisions on sales, workshop and parts.Health, Safety, Environment and Quality targets are achieved and enforced.
Key Competencies/Skills
Good leadership to drive a team towards achieving set targets.Good interpersonal skillsMust be competent to lead a diverse team of technical and sales staff.Staff motivation.Team development.Innovation in organisation, business and opportunity developmentCustomer-focused service orientated individual with a solid trucking background.Must have knowledge of DAF systems.Communication – Ability to work with people at different levels within the organization.Problem solving – Ability to solve problems independently.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS85NjAwMTU1MTY/c291cmNlPWd1bXRyZWU=&jid=1319517&xid=960015516
2d
1
SavedSave
Salary: R15 000 – R20 000 basic plus on target commission, company car, laptop, cell phone and company contributions
My client, a distributor of electrical and mechanical equipment, used in industrial applications seeks a dynamic, intelligent and professional individual, able to forge strong personal client relationships.
Requirements:
Grade 12 / Matric
Qualification in Electrical or Mechanical Engineering, highly advantageous
Fluent in both Afrikaans and English
Excellent customer service and telephone etiquette
Computer literate and familiar with various computer applications
Drivers’ license
Experience:
Minimum of 3 years technical sales experience
Proven track record of successful client retention and growth.
Responsibilities:
Daily activity will be split 50/50 between developing new business and maintaining existing business. As time progresses, naturally a greater amount of the daily activity will be spent on maintaining customers.
To provide excellent technical advice with a high aptitude for all things
Must be target driven and motivated.
Ability to identify, assess, confront and resolve opportunities and challenges.
Able to handle high work load and long-term projects, managing client relationships while finding creative solutions to a wide scope of market requirements.
If you have read through and meet with the required criteria, then send your application together with relevant qualifications.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS85NTg2MzAxNzY/c291cmNlPWd1bXRyZWU=&jid=119325&xid=958630176
2d
1
SavedSave
The primary objective of the position will be the management of the outbound delivery process through planning and invoicing to ensure the products we supply are delivered in a safe and timely fashion, to meet and exceed the expectations of our customers.
Key Responsibilities:
GENERAL
Maintains good housekeeping in the dispatch and receiving area.Ensure stock received from the assembly lines is stored in the correct rack allocation.Double check that stock assembled is approved by relevant departments as per job specific requirements.Ensuring that all products in the dispatch area are correctly tagged and stored in the correct location. It is also vital that products stored in the dispatch area are stored in the correct manner to maintain material preservation.Ensure packaging is at an excellent standard to both reflect the perceived quality and professionalism in the market and to ensure safety and stock safeguard during transport.Collects sales orders from the Internal Sales department and issues the sales order to the warehouse staff for picking.Collect Project based sales orders from the Internal sales department and issue to the production/operations manager before picking.Once assembly job cards are completed and the products delivered to the dispatch area by the production staff, you need to do the invoicing.Ensure the vehicle monthly check sheets is performed and submitted/uploaded.Ensure that all drivers maintain clean, safe and roadworthy vehicles at all time.Ensure vehicle licenses is renewed in time.Ensure vehicles are serviced as and when required.Perform monthly inspection on vehicles to ensure all safety equipment and spares are maintained and available. Escalate any non-conformances immediately.Assist with receiving as and when required and that all relevant processes are followed.Assist and plan general delivery and collections form third party suppliers etc and that the processes followedAssisting with stock count as and when requiredPoint of contact for the companies chosen bulk transporter and courier
DISPATCH
Managing the shipping of products for delivery purposes.Managing and overseeing all aspects of staging, packaging and dispatch of company goods.Dispatching of products efficiently.Ensures that security procedures are followed.Ensuring products are dispatched correctly, timeously and all procedures are followedPlanning the daily deliveries in the most efficient manner possible to reduces costs and to ensure that no delaysWherever possible ensure that vehicles are pre-loaded the day before in order for the vehicles to leave as early as possibleEnsures the goods that are loaded onto the c...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zODE5MzEzODQwP3NvdXJjZT1ndW10cmVl&jid=1469924&xid=3819313840
2d
1
SavedSave
Consulting Engineers with nearly 50 years experience in the industry seeks a Lead Engineer that specialises in water treatment and sanitation.
Key responsibilities:
Head/lead the water/wastewater treatment section within the water and sanitation divisionManage the execution of planning, design and supervision of projects in this fieldPerform research and write technical papers
Qualifications:
Bachelor’s degree in Civil Engineering with a Master’s degree or studying towards a Master’s Degree10+ years in a similar environment
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS80MTExNjY1NzIyP3NvdXJjZT1ndW10cmVl&jid=908488&xid=4111665722
2d
1
A leading engineering firm requires the expertise of a multi-skilled individual. We are searching for a season Quality Compliance Officer who also has a passionate for IT. The role is as follows:
Qualifications and Experience:
Relevant post matriculation qualification i.e. Web Programming Certificate / Web Technologies Certificate / JavaScript Certified Development Professional.Training in ISO 9001 and ISO 9001 auditing.Minimum of 5 years’ relevant experience, preferably in a built environment consulting practice.A solid understanding of how web applications work including security, session management, and best development practices.Adequate knowledge of relational database systems.Object-Oriented Programming, web application development, and Software Development coding languages (HTML, CSS and JavaScript).
Key Responsibilities:
Quality Management System (QMS):
Maintain responsibility for the Company’s QMS comprehensively and in line with the Principles of ISO9001/2015.Provide training to staff, to improve knowledge and understanding of quality system requirements and to keep staff updated regarding any process changes.Co-ordinate the submission of Regional audits to be conducted in accordance with the Internal Quality Audits Schedule as well as the issuing and closing out of all non-conformance reports and corrective action reports.Collate the results of all Regional audits to compile audit summary reports and analyses to be tabled at MANCO SA, EXCO and the Board on the findings, non-conformances, areas and timing of improvements.Regular liaison with Regional MRQs and provision of guidance on the delivery of their responsibilities to enhance compliance with QMS and readiness for annual QMS audits.Ensure that all client complaints are adequately dealt with and that the relevant corrective action process is followed.Manage the external audit process on behalf of the Company. Prior to the external audit, conduct audits at all Regional offices to identify and correct compliance issues and provide advice or training.Annually identify key performance indicators for MANCO in terms of quality related objectives.Closely monitor the project close-out process, ensuring that information necessary for CVs and datasheets are captured on ProMan, and that project datasheets and CSQ’s are generated.Visits / make arrangements to engage with the offices in Africa, as required, conduct audits / provide training / adapt the quality system to better suit their requirements.Assist SED companies with Quality system requirements as and when required.
Website and SharePoint Development and Maintenance:
Responsible for all aspects of the Company’s Intranet site on SharePoint in terms of site deve...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zMDIxMDg1NDc3P3NvdXJjZT1ndW10cmVl&jid=1484171&xid=3021085477
2d
1
SavedSave
Key Performance Areas:
Identify areas of improvement and applying SMART actions to meet requirements Turn-around time for analysis of failures as well as customer queries. Product development through engineering solutions.Requirements
National Senior Certificate / Matric BTech / BEng mechanical qualification1 - 3 years’ experience in a product development or processing environment Previous power transmission experience would be advantageous Hands on approach to manage work packages from customer enquiry to dispatch 3-5 years in industrial automation environment (Electrical control systems)
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zODQzODQ0ODI5P3NvdXJjZT1ndW10cmVl&jid=1497781&xid=3843844829
2d
1
SavedSave
This position will ensure technical support to the Sales team and the Key Account Management team. This includes the function in technical pre-sales and post-sales activities, evaluating and selecting the best technical solutions that meets customer needs, managing the whole life-cycle of the customised drive solutions, from the design to testing and provide technical oversight to the warranty process. This is done through managing the customer application engineering team and ensure that best practice is followed.
Key Responsibilities:
Product Development Strategy: Contributes to the development of local business by analysing the market needs and ensuring the identification of the best technical solutions to meet the customer needs, according to a framework of guidelines, processes and procedures set by HQ.Pre-sales technical support: Provides support to Sales in analysing Customer requests during the pre-order phase and propose the most suitable products configuration according to technical needs and in line with group strategies.Application Engineering: Manage the whole life-cycle of the customised drive solutions through the validation of technical and economic feasibility analysis, and products’ technical documents (Technical Drawings, Bills of Material)Application Engineering: Ensures proper accountability over pull project (“client-driven”) management and execution of special products/solutions working closely with HQ in the elaboration of technical feasibility studies, contributing to the product development process.
Qualifications and Experience:
Professional Engineering qualification (e.g. B.Eng./BSc Mechanical Engineering)Familiarity with CADGood MS Office skills, especially ExcelStrong PLM Process knowledgeStrong ability in Microsoft SuiteStrong MRP skills5-8 years’ experience in a mechanical /industrial engineering environment will be beneficial
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zNTUwMjQ5MDI5P3NvdXJjZT1ndW10cmVl&jid=1469928&xid=3550249029
2d
1
SavedSave
The Key Account / External Sales Engineer will be responsible to present and sell appropriate solutions in the form of value propositions to meet or exceed all sales goals, performance quotas and process expectations in the relevant region.
Key Responsibilities:
Sales:
Identifying, analysing and ranking existing and new customers in your area in terms of their class application and current and future business potential;The development of long term relationships with customers based upon confidence and trust;Setting up and maintaining a medium and short term customer call plan that will generate an ongoing source of inquiries for our value propositions;Executing call plans, ensuring existing customers are actively serviced and new opportunities and sales leads are properly followed up;Identification of new business opportunities on an ongoing basis through cold calling, networking, etc.;Active monitoring of your sales performance to ensure sales targets and margins are achieved;Preparation and maintenance on an ongoing basis of product presentations (MS Power Point, etc.);Attending marketing and sales functions as required from time to time;Managing communications between key customers and internal teams;Resolving key customer issues and complaints;Carrying out after hour on call duties in terms of the Division’s 24-hour service program.
Technical:
Understanding power transmission formulae and being able to use it as a tool for the selection of relevant equipment;Acquiring an in depth knowledge of the company’s products, use of its catalogues and criteria for product and solution selections;Acquiring knowledge of applications and understanding their impact on the selection of equipment;Carrying out site meetings in order to evaluate applications and or solve operating problems;Carrying out necessary calculations for the sizing, recommendation & selection of equipment;Carrying out on-call duties in respect of after-hours back up & breakdowns.
Qualifications and Experience:
5-10 years sales experience in the industry or similar experienceFamiliarity with CRM packagesGood MS Office skills, especially ExcelExperience in project management will be an advantageQualification in Mechanical engineering will be an advantage
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xOTg0MjIwNzk3P3NvdXJjZT1ndW10cmVl&jid=1469926&xid=1984220797
2d
1
SavedSave
Project Administrator:
Assist with project planning, and budgetingCertified Associate in Project Management (as a minimum)Gauteng (Centurion)
Project administrator to provide assistance to the project engineer with the project planning, budgeting. The position forms part of the Environmental Engineering Department
The requirements associated with the position are as follows:
Minimum required qualification in project management: Certified Associate in Project Management (CAPM)co-ordination with resources and progress reporting on various projects to clients of those particular projects.The position is for a permanent appointment based in our Centurion offices.The candidate should have an inclination for project management and be a good team player
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xNzAxNTMyNTI0P3NvdXJjZT1ndW10cmVl&jid=1124463&xid=1701532524
2d
1
SavedSave
Mining Infrastructure Department – Civil Design Engineer
Mining infrastructure design (roads, earthworks, water management, etc.)5 – 7 years’ experienceGauteng (Centurion)
Our client seeks to employ a Civil Design Engineer in the Mining Infrastructure Department, based in the Centurion office. The Mining Infrastructure Department specialises in, amongst other, the design of roads, haul roads, bulk earthworks, terraces, stormwater management, dams, stream diversions, mine waste (tailings) disposal facilities and mining infrastructure areas.
The requirements associated with the position are as follows (mandatory):
BEng / BSc Eng or higher qualificationMinimum of 5 years’ relevant experienceAbove average academic results
Preference to candidates with the following skills and attributes:
Relevant experience in the design of mining related infrastructureExperience with Autodesk Civil 3DProfessional registrationGood critical thinking and problem-solving skillsGood communication skillsDynamic, self-motivated, takes responsibility and ownership of tasksWorks independentlyAttention to detail
The main duties associated with the position include the following:
Concept, preliminary and detailed designs of mining infrastructureTender documentation i.e., BoQ and works information
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS80MTQyMzAyNjA4P3NvdXJjZT1ndW10cmVl&jid=1124462&xid=4142302608
2d
1
SavedSave
Tailings– Senior Engineer:
Gauteng (JHB)5 – 10 years relevant experienceProfessional registration advantageous
Our Client seeks to employ a self-motivated engineer to join our Tailings department and contribute to existing and new projects. The successful candidate will join a dynamic team in an intermediate level position within a well-established consulting firm
The requirements associated with the position are as follows:
BEng or BSc (Eng) required5-10 years of relevant experienceBEng in Civil Engineering or similarProfessional registration (PrEng) will be advantageousExperience in the design of tailings storage facilities, return water dams and associated infrastructureExperience in carrying out annual audit inspections on tailings storage facilities and return water damsExperience in surveillance of tailings and/or return water damsExperience in tender and contract documentationExperience in CPTu testing and interpretation preferredExperience in geotechnical investigations considered advantageousGood fundamental understanding and knowledge of geotechnicsExposure to associated civil engineering activities such as hydrology, structural design, dam breach assessments, water balancesCandidate should be proficient in MS Word, MS Excel, MS Outlook and MS PowerPointProficiency in MS Project considered advantageousCandidate should be proficient in slope stability, seepage analysis and FEM software, such as Geostudio.Candidate should be proficient in AutoCad Civil 3D or modelmakerProject management experience advantageous
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yNzg1MzY3MDYzP3NvdXJjZT1ndW10cmVl&jid=1124461&xid=2785367063
2d
1
SavedSave
Purpose of this role
· Group Finance’s lead for the implementation and administration of the group’s financial systems and other systems owned by Group Finance
· Responsible for gathering and analyzing business process requirements for Finance and configuring into systems to efficiently meet those requirements
· Plans for finance related system projects and business process improvements
· Works with software systems project teams and directs project activities of Finance staff and assists with coordination under the direction of subject matter experts
· Administers user security and configures the software systems owned by Finance
· Works collaboratively to carry out complex work to manage, support and integrate system requirements across business functions to ensure effective functioning of Finance systems
· Serve as the Finance liaison with Group IT, vendor resources and other group staff that utilise financial systems
· Ensure efficient maintenance and operation of financial systems; provide optimum functionality and ensure data integrity and security
· Work to provide useful system outputs, reports, data analysis and identify process improvement opportunities and implement
· Support financial decision making by auditing, analyzing, interpreting information and reports from finance systems and making recommendations to key stakeholders in Finance
· Provide reports to the Group Head of Finance with regards to internal controls within finance systems and ensure that these are aligned to internal control frameworks of the Group
· Lead the development of test case scenarios and ensure user acceptance testing outcomes are aligned to intended outcome
· Work to provide documentation and training for users of Finance systems
Minimum Requirements
Education and Experience
Education:
· University degree in Accounting, Finance, Business Administration or Informatics
· Post graduate information technology qualification would be beneficial
Experience:
· 5 years and above as financial system analyst or manager
· Exposure to managing multiple systems within finance, e.g. treasury management system, procure to pay system, etc.
· Exposure to a high pressurized, complex environment in a matrix group structure
· Strong IT literacy with good MS Excel, MS Word, MS Power point skills, Power BI, VBA and SQL scripting and a solid understanding of accounting software principles and user administration skills.
· Sound judgment, demonstrating logical decision-making capabilities.
· Thorough technical knowledge of accounting principles, internal controls and IFRS
· Systems integration expertise with exposure to big data and advanced data analytics
· Financial expertise and compli...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xMTY4NDM3NDc/c291cmNlPWd1bXRyZWU=&jid=376667&xid=116843747
2d
1
SavedSave
The primary purpose of this role is to source new leads and secure new business –potentially from both internal group customers and external prospects or non-group customers as well as deliver the full client value proposition to all clients. Ensure implementation of defined strategy. To create and maintain a stable and disciplined operating environment that supports the company.
Requirements
Education and Experience:
An undergraduate qualification in Finance or insurance is essential, i.e. BCom (majors in Financial Management or Financial Planning or Investments)A proven sales track record within hunter and closer framework.Experience selling at the C level5 years’ plus experienceFAIS Accredited or relevant body registered
Knowledge and skills
Ability to engage with clients and provide guidance on product line of Business: Investments; Health or Retirements.Excellent understanding of line of Business: Investments; Health or Retirements.Strong knowledge of Pension funds, FAIS and related legislationStrong knowledge of Employee Benefit Industry
Business understanding:
Understanding of current structures and policies including what factors impact these in order to engage with clients on the same.Relationships with various stakeholders in order to negotiate rates and benefit structures.Acquire and integrate industry knowledge related to general trends, emerging technologies, and competitors
Competencies
Leadership Competencies:
Commercial acumenPurposeful collaborationGrowing capability
Strategic Competencies:
CLIENT MANAGEMENT• Ability to interact with Clients• Relationship building and stakeholder management• Client insight• Innovation AdviceEXECUTION EXCELLENCE• Strategic Innovative thinking and delivery• Ability to Think Big Picture (Strategic Thinking)• Results - Orientated • Client SLA management and delivery• Accountability• Operational excellence• Managing change• Creative Problem- Solver
Functional Competencies:
Ability to engage with corporate stakeholders and build new business pipelineThe ability to determine the most appropriate corporate solutions for client needs.The ability to enhance client value propositionAccount ManagementExcellent communication and presentations skills with top-notch customer service approachBe able to work independently & as part of a team in a fast pace, rapid change environmentExceptional professional presence and b...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zODMzNTQ4MTU2P3NvdXJjZT1ndW10cmVl&jid=376671&xid=3833548156
2d
1
SavedSave
Purpose of the roleProcess Specialist is responsible for defining, analyzing and documenting business processes spanning across TCR departments in regards to onboarding, managing and servicing clients. The key objectives are to define new processes to support the take-on of new clients, and to document and improve efficiency and effectiveness of existing processes. The individual must therefore have experience in process analysis, design and mapping and monitoring, and well as business analysis and customer engagement experience.
Minimum requirements (Qualifications and Experience)
Grade 12Bachelors degree related to information systems, project, service and/or process management5+ years’ experience in client service operations, or related business and process analysisExperience in process engineering in a service management environment / consulting experienceExperience with SDLC with regards to client requirements and specificationsProcess mapping and documentation experience, with relevant tooling experienceBusiness analysis experience in mapping customer requirements and user specificationsLean Six Sigma or equivalent experience
Key Responsibilities:
Process design, analysis, documentation and optimisationInterfacing with clients to define requirements and needsUnderstanding of client take on processes and design of processes for servicing clientObtaining and coordination of all interdepartmental (stakeholder) input in respect of process and departmental dependencies when setting up or changing processesCustodian of process flow documents and client specificationsDevelopment of SLA for new clients and OLAs between departments for new services.Regular review and analysis of process efficacies and adjusting processes accordingly where neededSupporting business units in mapping and optimising processes across client lifecycleWorking with IT to develop new solutions and services to support clients.Final sign off on change requests as well as post implementation sign off on process changes implemented
Technical and Behavioral Competencies Required Working knowledge of:Process analysis and mappingUnderstanding of client data and integration Understanding of credit collections lifecycleExperience with collections systems: Cas/E4/Vision/CACS/Sharefile/QMSTallyman/DM9/Nadir MS office (Word/Excel/Powerpoint)Six Sigma certification preferableAnalytically mindedHigh attention to detailProblem Solving SkillsInterpersonal SkillsAccountabilityStress ToleranceDeadline drivenTeam playerPlanning and organizing skills
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS80OTEwNjM0OTQ/c291cmNlPWd1bXRyZWU=&jid=376668&xid=491063494
2d
1
SavedSave
Introduction
A well established Civil Enigineering company based in Randburg is looking for a Junior Draughtsman with AutoCAD experience to join their company.
Duties & Responsibilities
Responsibilities
Use AutoCAD to Draft ,calculations and measurementsResponsible to generate full quotation and production engineering sheeting and flashing drawing calculationsEnsure all drawings and bill of materials are completed on-timeWhere applicable, with Manager consult with Engineers. Clients and Sales on new or changed sheeting & flashing designs before processing of jobsEnsure sufficient checking of drawings and BOMs to eliminate Non-Conformance reportsCountersign NCRs received by the quality department and manage drawing corrections accordinglyAssist Drawing Office Manager with query co-ordination and resolutionWork and assist other departments as may be required from time to time
Desired Experience & Qualification
Requirements
• Grade 12
• Relevant qualification.
MUST HAVE AutoCAD Drafting experience.Official AutoCAD qualification/certification is preferredStrong understanding of steel sheeting manufacturing processesGood reading, writing, and arithmetic skills requiredAttention to detail and self-driven is essentialGood working experience with MS Office packages, in particular the ability to formulate spreadsheets and maintain dataGood communication skills both verbal and written are essentialGood mathematical skills and basic reasoning ability
Desired Skills
• AutoCAD
Desired Work Experience
• 1 to 2 years
Package & Remuneration
R 10 000 - R 15 000 CTC pm. (Salary is dependent on technical expertise, design experience, AutoCAD software and relevant industry experience)
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xNTIyMjk2NjU5P3NvdXJjZT1ndW10cmVl&jid=1202494&xid=1522296659
2d
Save this search and get notified
when new items are posted!