Please note that our Terms of Use and Privacy Notice are applicable.
Results for mechanical engineering in All Categories in Eastern Cape
12
5h
1
SavedSave
**SKILLED AUTOMOTIVE TECHNICIAN TO START AS SOON AS POSSIBLE**HOURS: MON – FRI (07:00 – 17:00)SALARY: WILL BE DISCUSSED DURING INTERVIEWMust be able to work independently at times and be able to communicate and provide advice to clients if needed.RESPONSIBILITIES• Inspect vehicle engines and mechanical components to diagnose issues accurately• To Inspect vehicle computers and electronic systems, as well as repairs and maintenance• Conduct routine maintenance (replacing fluids, lubricating parts etc.) aiming to vehicle functionality and longevity• Repair or replace broken or dysfunctional parts and fix any other faults (e.g. leaks etc.)• Keep logs on work and faults• Maintain equipment and tools in good conditionREQUIREMENTS• 5-8 years experience with contactable references as an auto mechanical technician• Excellent knowledge of mechanical, electrical, and electronic components on vehicles• Working knowledge of vehicle diagnostic systems and methods• Ability to handle various tools and equipment• Willingness to observe all safety practices and precautions for protection against accidents, dangerous fluids, chemicals etc• Must be in excellent physical condition to do the job efficiently• Valid certification and qualifications with completion of apprenticeship is preferred but negotiableEXPERIENCE ON VEHICLES IS A MUST.Please email your CV as well as all relevant documentation toEmail: Reception-classicauto@outlook.com
8h
1
SavedSave
HOURS: MON – FRI (07:00 – 17:00): SAT (08:00 – 13:00)SALARY: WILL BE DISCUSSED DURING INTERVIEWMust be able to work independently at times and be able to communicate and provide advice to clients if needed.RESPONSIBILITIES• Inspect vehicle engines and mechanical components to diagnose issues accurately• To Inspect vehicle computers and electronic systems, as well as repairs and maintenance• Conduct routine maintenance (replacing fluids, lubricating parts etc.) aiming to vehicle functionality and longevity• Repair or replace broken or dysfunctional parts and fix any other faults (e.g. leaks etc.)• Keep logs on work and faults• Maintain equipment and tools in good conditionREQUIREMENTS• 5-8 years experience with contactable references as an auto mechanical technician• Excellent knowledge of mechanical, electrical, and electronic components on vehicles• Working knowledge of vehicle diagnostic systems and methods• Ability to handle various tools and equipment• Willingness to observe all safety practices and precautions for protection against accidents, dangerous fluids, chemicals etc• Must be in excellent physical condition to do the job efficiently• Valid certification and qualifications with completion of apprenticeship is preferred but negotiableEXPERIENCE ON VEHICLES IS A MUST.Please email your CV as well as all relevant documentation toEmail: Reception-classicauto@outlook.com
8h
1
Our client based in Port Elizabeth is looking to employ a Quality Technology Engineer / Metrologist. Requirements: University degree in mechanical or industrial. Quality qualification will be an advantage.1 to 3 years of experience in the automotive environment. Responsibilities: Design, implement and carry out analysis, test methods, concepts and procedures, and ensure adherence to test programs for assigned specialization.Design or amend quality analyses and test procedures, implement test norms, install and adjust equipment and ensure proper calibration.Ensure adherence to defined test procedures at all stages of the process, and ensure accuracy and reliability of all testing.Execute or oversee execution of test sequence and test series as defined and agreed, and ensures proper documentation in the systems.Evaluate test results, and derive, discuss or decide on appropriate measures in case of non-conformance.Cooperate with external laboratories, audit authorities or internal stakeholders and customers with respect to design and qualitative aspects of test procedures. If you are not contacted within two weeks of applying, please consider your application unsuccessful.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzU4Mjg5X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1213102&xid=1108_58289
2y
1
SavedSave
New Vacancy!! Our leading client in the Automotive Sector is looking to employ a Maintenance Technician to join their dynamic team in East London.
Job Description:
Mechanical, pneumatic and hydraulic planned and preventative maintenance and repairs to machinery and equipment, including plant as required.
Execution of planned and preventative maintenance and repairs on machinery, equipment, and plant in accordance with maintenance plan.
Report deterioration and excessive wear and tear on machinery, equipment and plant that requires major repairs to be carried out.
Report all delays that cannot be completed in the planned time frame due to addition faults and problems identified during the maintenance or repairs to the machine or equipment.
Assist with the manufacturing, refurbishment or modification to existing machinery and equipment as required.
Assist with the installation and commissioning of refurbished, modified or new machines, as required.
Abide by safety rules and regulations at all times
Job Requirements:
Certification as qualified Millwright / Diploma level in Mechanical/Electrical/Mechatronics Engineering
Experience as a qualified tradesman, preferably in automotive sector.
Experienced in electrical, hydraulics and pneumatics.
Understand and read electrical, hydraulic and pneumatic circuits and drawings.
Self-starter, hard and conscientious worker.
Experience in mechatronics
SECTOR: Automotive
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93ZWJhcHAucGxhY2VtZW50cGFydG5lci5jb20vd2kvYXBwbGljYXRpb25fZm9ybS5waHA/aWQ9c3RhZmZzb2xzJnZhY2FuY3lfcmVmPUUuTDAwMjAyOC9CRw==&jid=1811239&xid=E.L002028/BG
19h
1
Job Description and Responsibilities:Design and install new plant concepts by following engineering principles, creating 3D and 2D CAD models, raising enquiry requests, conducting site meetings and selecting preferred suppliers.Running, monitoring and reporting on installation commissioning and report final sign-off to Management.Carry out maintenance on existing plant and equipment by following a preventative maintenance system.Procure the required components and equipment from external suppliers in accordance with the standard company purchasing system.Analyse failed plant and equipment for reasons for failure, and recommend and implement new processes and procedures in order to prevent such failures from reoccurring.Provide input into Financial Planning Rounds for CAPEX expenditure.Comply with and implement the statutory legal, safety and environmental requirements as applicable to the engineering test facility.Review power and water usage of the facility, and provide input into methods, processes and procedures to reduce water and energy consumption.Implement and co-ordinate the annual IS09001 calibration and certification activities for the engineering test facility.Keep the faculties up to current company Group standards.Maintain a detailed record of the facility by means of drawing records, CAD models and equipment documentation.Train fellow engineers in the use and operation of the engineering test facility.Education and Experience:Have a minimum of Bachelor of Science Degree in Mechanical Engineering.At least 5 years’ experience in the development and maintenance of facilities, control systems and equipment.A minimum of 3 years as a Senior Engineer performing design and Test engineering functions.
Skills, Attributes & Other requirements:In-depth knowledge of general mechanical engineering concepts with specific focus on Heating, Ventilation and Air-conditioning systems, mechanical equipment design and fabrication, heat transfer, instrumentation systems, software control and electrical power systems.
Insight and knowledge into technical engineering concepts.Specialized computer literacy with specific reference to 3D-CAD competence.Excellent report writing and presentation ability.Human relations (negotiation and patience).Innovation when faced with resource limitations.Knowledge of corporate procurement and Capex approval systems.Ability to solve complex mechanical engineering problems.Ability to plan and execute projects.Ability to identify risks, analyse them and setup planning to minimize risk.Ability to monitor, follow-up the project progress, to identify major project issues, and to escalate when necessary
Please forward CV and ALL supporting docum...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zODQyODM0ODg1P3NvdXJjZT1ndW10cmVl&jid=1294690&xid=3842834885
1d
1
SavedSave
Business Development Manager required for a reputable industrial automation company based in East London , Eastern Cape
Requirements:
A tertiary qualification in electrical or mechanical engineering or similar qualification would be advantageousPrevious experience in an industrial automation environmentWilling and able to travel from time to time (Local & international)Consult with clients, vendors and personnel to discuss and formulate estimatesConfer with engineers, owners and subcontractors and adjustments to duration of projectsSet up cost monitoring and reporting systems and procedures
Duties and Responsibilities:
Lead and be responsible for satellite office of the company and to represent the company in selling, installing and supporting machinery.Interface with current and potential customers on a regular basis.Be involved in project planning and execution.Oversee work of technical installation teamVisit regular and prospective client businesses to establish and act on selling opportunitiesMonitor customers changing needs and competitor activitySupervise on-site employeesInstall electronic systems meeting standards and codes
Should you wish to apply please email your CV through to Kerry O’Hagan at Kerry@profilepersonnel.co.za
Only shortlisted candidates will be contacted. Should you not receive a response within 14 days please consider your application unsuccessful. We will keep your CV on our database for any other relevant roles that may arise.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yOTQ4OTgzMDM5P3NvdXJjZT1ndW10cmVl&jid=1755014&xid=2948983039
1d
1
SavedSave
Responsibilities:New Product Development & ProductionApproval (APQP) of new materials, components & systems in electrical commodity (wiring harnesses, electronic modules, motors, etc.)Provide Supplier Quality requirements for all new business sourcing decisions and business transfers (BTAB) affecting local suppliers to achieve company objectives in terms of quality, technology and priceKey member of sourcing team in support of Supplier Nomination / Selection processSupplier Quality performance monitoring and implementing continuous improvement initiatives
Drive rapid product issue resolution with suppliers for all supplier manufactured causesConduct regular supplier audits on quality management systems and processes to ensure supplier manufacturing controls consistently meet qualityrequirementsImplement product and/or process changes at suppliers, and ensure they are effectively managed / executed without disruption to supply while meeting company quality and engineering standards
Requirements:Mechanical, Quality or other related Engineering qualification with an additionalNQF level 4 minimum in Machining & ToolmakingMinimum 5 years’ experience in tool & die fabrication in the stampings commodity with a strong desire and/or exposure in the manufacturing qualitysystemsMinimum 10 years’ experience in automotive manufacturing process and component developmentExtensive knowledge of Quality Management Systems such as IATF16949,ISO9001, VDA6.3, etc.Proven Manufacturing Quality Systems knowledge including lean manufacturing conceptsThorough understanding of Process Failure Mode & Effects AnalysisKnowledge in automotive supplier manufacturing processes and controlsThorough understanding of Advanced Product Quality Planning (APQP) including detailed knowledge of Production Part Approval Process (PPAP) for automotive components and systemsWorking knowledge of Geometric Dimensioning and Tolerancing (GD&T)
Requirements:English oral and written communication skillsAbility to confidentially present to large forums and in front of Senior Leadership of the company and at the supplier baseStrong negotiation skillsAbility to influence others to gain cooperation and ability to deal with ambiguityInterpersonal savvyLearning on the flyDrive for results, high degree of planning, creative ability and disciplineStrong strategic agilityGood technical knowledge in automotive electrical commodity, systems and componentsHighly analytical, able to conduct root cause analysis and apply problem solving techniquesGood Problem Solving skills (8D, 5 Why’s, Ishakawa , Red X, etc.)Extensive knowledge on manufacturing techniques and processes used in manufacturing electrical compone...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xNDkzMjk2NDM2P3NvdXJjZT1ndW10cmVl&jid=1310497&xid=1493296436
1d
1
SavedSave
DevOps Engineer required for leading automotive company based in East London.
You will be responsible for collaborating with Architects to design and implement DevOps practices across product delivery.
Responsibilities:
Implement and maintain CI/CD pipelines for product componentsCoordinate and perform deployments of product releases to various environments stagesInterface with various service teams in order to provision required infrastructure (databases, cloud resources etc.)Provision and maintain tools to help maintain and support the product (Automation, Logging, Monitoring tools etc.)Manual and Automated testing of product infrastructure and key component services to ensure overall product healthDevelop and maintain technical support documentation of the productSystem monitoring administration of the IBM WebSphere MQ/IIB and Axway CFT/SFTMonitoring of VM environments with several active REST-ServicesResponsible for troubleshooting and main contact partner for stakeholders
Requirements:
Development and DevOps Practices (Continuous Integration, Continuous Deployment)Minimum NQF 7 – BSC/BCom/BTech in Information Technology, Information Systems Engineering or Computer Science or relevant equivalent5+ years experience designing and building software applicationsProficiency with Java technologies and enterprise applicationsExperience working on complex software projects
You must be experienced in:
Java build automation tools (Maven, Gradle, Jenkins, IBM Websphere)Programming languages (Java / J2EE)Database technologies (PostgreSQL, IBM, DB2, etc.)Application monitoring tools (App Dynamics)API design using OpenAPI Standard 3.xContainer Orchestration: Kubernetes, Docker, Docker SwarmCloud technology: Deployment and Hosting of web services on cloudIT infrastructure (Virtual Machines, etc.)
Not essential but would be valuable:
Knowledge of Message processing and caching mechanism: Kafka, Rabbit MQ, RedisKnowledge of Monitoring Tools (Prometheus + Grafana)Knowledge of ELK (Elasticsearch, Logstash, Kibana)
Should you wish to apply please email your CV through to kerry@profilepersonnel.co.za
Only shortlisted candidates will be contacted.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yNDk4NDcyMzUwP3NvdXJjZT1ndW10cmVl&jid=1529253&xid=2498472350
1d
1
SavedSave
Type of Position:
Applications are invited from suitably qualified & experienced employees to fill the above vacancy in Quality Assurance - QA Purchase Parts Department.
Job Description and Responsibilities
To ensure that the motor vehicle components perform consistently to specification throughout the life cycle of the component by:Initiating and managing the Qualifying Program for new part introduction.Implement continuous improvement by identifying the root cause for part deviation from specification and correct the deviation in all phases of the life cycle of the part.Testing and evaluating the performance of parts according to specification.Provide the required Technical Expertise for complete parts in respect of material and function.Initiate design improvements for complex problems on parts
Education and Experience
National Diploma /Degree in Mechanical Engineering /Electrical Engineering /Polymer /Quality)Minimum of 3 years relevant work experience in the manufacturing environment
Skills, Attributes & Other requirements
In-depth knowledge of applicable motor vehicle parts, their function, applicable specifications, part manufacturing processes and testing methods.Sound technical knowledge of motor vehicle components and systemsKnowledge and application of Quality Tools e.g., DOE, SPC, FMEA, 8DAbility to interpret drawings and related specifications.Strong analytical abilityComputer literate (Ms Office)Ability to effectively communicate and present to all levels within the company and externally. (Written and verbally)Ability to work independently.Be prepared to travel, local and overseas at short notice.Have a valid driver license.
Please forward CV and ALL supporting documentation to, Caree-Lee@profilepersonnel.co.za. Should you not hear from Profile Personnel within 14 days please consider your application unsuccessful for the vacancy. Please note all applications will automatically be added to our database for future vacancies
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yMjIxNTc5Mzk4P3NvdXJjZT1ndW10cmVl&jid=1695475&xid=2221579398
1d
1
SavedSave
Maintenance Artisans (Automotive Manufacturing) required for a large automotive manufacturing company based in East London.
General purpose: Plan and carry out daily mechanical and electrical maintenance to all plant machinery.
Responsibilities:
Ensuring 5S System and safe working standardsElectrical installations and PLC’sMechanical installationsEnsuring Preventative Maintenance is carried out according to schedules for both mechanical and electricalCarry out lubrication schedulesSpeedily rectify breakdowns and after hours call outs
Requirements:
N4 in Mechanical/Electrical Engineering – Trade Tested or similar5 years’ experience in a factory maintenance environmentComputer literacy is a mustAbility to learn fast and be independentExcellent leadership and organizational skillsExcellent verbal and written communication skillsExperience in Computerized Maintenance Management Systems preferredOwn transport is essential
Should you wish to apply please email your CV through to Kerry O’Hagan at Kerry@profilepersonnel.co.za
Only shortlisted candidates will be contacted. Should you not receive a response within 14 days please consider your application unsuccessful. We will keep your CV on our database for any other relevant roles that may arise.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xNzQ4NTg4MDA2P3NvdXJjZT1ndW10cmVl&jid=1476329&xid=1748588006
1d
1
SavedSave
Our client in the Eastern Cape is seeking a project planning engineer with at least 5 years’ experience in industrial scale ‘site work’ projects. You will need a mechanical engineering qualification, excellent planning ability, leadership qualities and a strong sense of accountability in delivering quality projects on budget, on schedule and without compromising Safelty, Health and Environment.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS80MTA1ODAyMjkyP3NvdXJjZT1ndW10cmVl&jid=1180173&xid=4105802292
1d
1
SavedSave
Our client currently has a vacancy for the above position and wish to invite suitably qualified applicants to submit their details for our consideration.
Ideally the successful incumbent should have
Matric, grade 12 or equivalent qualification together with a minimum of 2 years’ experience in the repairing of digital and /or RF equipment to component level in technical repairs;Computer Literacy with at least the ability to work on Word and Excel in the Microsoft Office suite;A working knowledge and understanding of Application Software, Barcode Label Printing software and WLAN;Familiarity with Microsoft Windows operating systemsSMD component soldering skillsA good team player with above average communication skills both telephonically and in person.Proven experience in successfully interacting with customers;The ability to handle multiple responsibilities at the same time;Self-driven and enthusiastic with a strong customer service orientation;English literacy and numeracy of at least a Grade 12 level;Ability to handle all repairs according to strict deadlines;Willingness to travel for work as and when required;Professional and presentable appearance; andValid Driver’s License
The successful incumbent, will report to the Technical Manager and the responsibilities of the position include:
Perform electronic and mechanical repairs to productsProvide consultation support for installationsUndertake installations when requiredMember of the Workshop Team to provide post – sale support to company staff, business partners and end-usersMinimum 2 years repairing digital and /or RF equipment to component levelSMD component soldering skillsPersonal computer, standard office equipmentMultiple and changeable prioritiesOccasional stressful customer interfaceGood verbal and written English skillsStrong telephone skills and courteous telephone mannerEffective and tactful communication with customers, sales and other departmentsFamiliarity with Microsoft Windows operating systemsRepairs in a timely, neat and accurate manner of all defective hardware sent to the workshop by customersConfigures and test sales demo systems per demo request instructionsPerforms occasional service calls at customers locationsComplete all required documentation in accurate and legible fashionResponsible for good housekeeping and safety practicesA person who can work on his/her own with minimum supervision
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yMzAyOTYxMTg5P3NvdXJjZT1ndW10cmVl&jid=1719463&xid=2302961189
1d
1
SavedSave
QUALIFIED MOTOR MECHANIC/EAST LONDON
Our client is seeking a qualified and experience Motor Mechanic to join their team. The ideal Candidate will be responsible for diagnosing, repairing and maintaining vehicles to ensure optimal performance and safety. High-quality service is key.
Min. Requirements
Trade qualification as a Motor Mechanic is non-negotiable (Copy to be submitted with application)
Minimum of 3 years’ experience working as a motor mechanic
Strong diagnostic and problem-solving skills with the ability to troubleshoot complex mechanical and electrical issues
Proficiency in using diagnostic equipment, hand and power tools
Excellent mechanical aptitude and attention to detail
Responsibilities:
Perform routine maintenance services on vehicles
Diagnose mechanical and electrical problems using diagnostic equipment and troubleshooting techniques
Conduct thorough inspections of vehicles to identify issues and determine the appropriate repair solutions
Repair and replace defective parts/components, such as engines, transmissions, brakes, steering systems etc.
Perform engine tune-ups and other advanced repair services needed
Maintain accurate records of work performed, including parts used, labour hours and diagnostic findings.
Adhere to safety protocols and procedures
Provide excellent customer service
The successful Candidate will,
Have the ability to work independently and as part of a team in a fast-paced environment
Be flexible, at times overtime may be required
Have strong communication skills
Have the ability to lift heavy objects and stand for extended periods
Salary: Market related + incentives
Application Process: Online applications will receive preference, https://www.dittojobs.com/jobs/view/1728496810 ensure you upload a head and shoulder photo, alternatively e-mail CV with Trade Qualification, references, valid driver’s license and a recent head and shoulders photo to solutions@workafrica.co.za, ensure you use QUALIFIED MOTOR MECHANIC as a reference in the subject field. Please deem your application as unsuccessful if you receive no feedback after 3 weeksJob Reference #: QUALIFIEDMECHANICConsultant Name: Claire OReilly
1d
1
SavedSave
Duties and Responsibilities:
Lead and manage the maintenance department, ensuring smooth and efficient operationsDevelop and implement preventative maintenance and continuous improvement programs to minimize downtime and optimize equipment performanceMaintain OEE on all equipment in line with company specificationsCoordinate and supervise maintenance activities, including routine inspections, repairs, and equipment overhaulsProvide technical expertise and guidance to the maintenance team, troubleshooting complex issues as they ariseMonitor and maintain inventory of spare parts, ensuring availability for timely repairs and replacementsManagement of contractorsEnsure that the maintenance function operates in accordance with the relevant legislation, including but not limited to OHS Act and By-Laws. Ensure adherence with all health, safety and environmental policies and procedures to ensure the safety and wellbeing of staff and visitorsKeep maintenance logs and report on daily activitiesInspect building structures to determine the need for repairs or renovations. Oversee building projects and renovationsReview utility consumption and strive to minimize costsEnsuring that facilities meet government regulations, health and security standards and energy efficiency requirements.Identification of training needs for subordinates to aid achieving objectives
Qualification and Experience:
A Matric CertificateDiploma/Degree in Mechanical/Electrical Engineering or equivalent10+ years working experience in plant maintenance, preferably in the Automotive industry, with 3 years in a managerial position
Knowledge, Skills and Abilities:
Experience in planning maintenance operationsStrong knowledge of engineering concepts, including electrical, hydraulics and mechanical systemsStrong knowledge of tooling, equipment, engineering specifications, and cost reduction methods in automotive applications·Working knowledge of the IATF 16949, ISO45001 and ISO14001 standardsSound knowledge of the OHS ActProblem-solving and analytical SkillsPlanning and Organisational SkillsKnowledge of facilities managementProficiency in MS Office applicationsExcellent verbal and written communications skillsKnowledge of ERP systemsAttention to detailfAbility to handle multiple tasks in a fast-paced, team-oriented and multi-cultural environmentGood interpersonal skillsGood presentation skills
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS85NDYxNTA5MDU/c291cmNlPWd1bXRyZWU=&jid=1677164&xid=946150905
1d
1
SavedSave
Vehicle Technician and Master Renault Technician Witbank
We have a vacancy for a Motor Vehicle Technician with a Vehicle dealership in Witbank.
Duties: General Service and maintenance of vehicles, Diagnostics and fault finding, Repairs and testing of vehicles booked into workshop
Requirements:
Qualified as Motor Mechanic with a Trade certificateMechanical engineering certificate would be beneficialMust have 4 to 5 years’ experience as technician with a Vehicle DealershipExperience working within a corporate vehicle dealershipValid SA Driver’s License and Clear criminal recordSolid track record and references
Basic salary plus incentives.
Send cv to candice@firstdegreerecruitment.co.za
https://www.ditto.jobs/job/gumtree/3976026646?source=gumtree
1d
1
SavedSave
We have a vacancy for a Motor Vehicle Technician within a vehicle dealership in Mpumalanga
Duties: General Service and maintenance of vehicles. Diagnostics and fault finding, repairs and testing of vehicles booked into workshop
Must have 4 - 5 years experience as technician within a vehicle dealershipQualified as Motor Mechanic with Trade CertificateMechanical engineering certificate would be beneficialExperience working within a corporate vehicle dealershipValid SA drivers license and clear criminal recordSolid track record and referencesMust have Renualt Co Tech qualificationMust have 4 - 5 years experience as technicain within a vehicle dealershipQualified as Motor Mechanic with Trade CertificateMechanical engineering certificate would be beneficialExperience working within a corporate vehicle dealershipValid SA drivers license and clear criminal recordSolid track record and referencesMust have Renualt Co Tech qualification
Basic plus incentives
Please email CV to charne@firstdegreerecruitment.co.za
https://www.ditto.jobs/job/gumtree/2629398104?source=gumtree
1d
1
SavedSave
Our client in the Automotive Industry based in East London is currently looking to employ a Maintenance Artisan.
An awesome career opportunity awaits!
Requirements:
Matric / Grade 12.N4 in Mechanical / Electrical Engineering – Trade Tested or similar.5 years’ experience in a factory maintenance environment.Computer literacy is a must.Ability to learn fast and be independent.Excellent leadership and organizational skills.Excellent verbal and written communication skills.Experience in Computerized Maintenance Management Systems preferred.Own transport is essential.
Responsibilities:
Ensuring Preventative Maintenance is carried out according to schedules for both mechanical and electrical.Frequently check stock levels for all spares/materials and order in time.Assisting the Maintenance Manager in periodic trend analysis of breakdowns and expenditure with recommendations for continual improvement.Involvement in daily emergencies and urgent work requests.Completion of basic preventative maintenance.Ensuring 5S System and safe working standards are always adhered too.Keeping the Maintenance Manager informed of abnormal or critical situations and seeking advice on matters outside the Planners knowledge or authority.Ensuring maintenance procedures and documentation complies with relevant Quality Assurance standards and Safety Standards.Electrical installations and PLC’s.Mechanical installations.General buildings and all utilitiesComply with OHS Act Regulations and other Legislation.Involve with all new projects etc.Accurately carry out maintenance schedules for production machinery and services (Electrical and Mechanical).Carry out lubrication schedules.All work must be performed safely according to all safety regulations.Speedily rectify breakdowns and after hours call outs.Weekly shift and stand by duty to be performed as per roster.Adhere to Company HSEE policy.Perform shift and standby call out duties.Working overtime when required as agreed by Plant Engineer.
Please note should you not receive a response within two weeks of applying please consider your application unsuccessful.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xMDAwODc3MDU3P3NvdXJjZT1ndW10cmVl&jid=1490653&xid=1000877057
1d
1
SavedSave
Our client in the Automotive sector based in East London, is looking to employ a Senior Technical Manager.
An awesome career opportunity awaits.
Requirements:
Minimum degree/diploma with qualification in Mechanical/Electrical Engineering or equivalent.PLC experience will be an added advantage.At least 10 years’ experience in a similar environment.Minimum of 10 years managerial experience.Familiar with project management principles.
Responsibilities:
Oversee both Engineering and Maintenance department to maximize full capacity.Liaise with the customers regarding product and process specific requirements.Develop and maintain the plant layout and process flows to create the best optimized process area to be effective and efficient.Develop project plans and project costing data.Develop APQP plans for implementation to ensure the best possible process specifications are met.Controls Engineering, project and APQP meetings.Oversee departmental responsibilities for engineering changes and development programs.Oversee process related downtime and find ways to eliminate this.Improve processes to reduce scrap energy and other related matters to ensure a cost saving drive within the department.Develop and implement engineering systems and maintenance procedures.Manage the implementation various programs and projects in both Engineering and Maintenance departments.Effectively manage subordinates and resources.Prepare engineering product information for quotation purposes.Liaise with the customers and suppliers regarding related technical issues.Ensure the YFAI Vision is upheld at all levels.Ensure adequate staffing and direct subordinates to achieve relevant goals timeously.Plan resources and budgets.Responsible for training, coaching, and guidance of subordinates.Monitor, manage and report on the performance of the Engineering function.Planning, organizing, controlling skills.Critical thinking and innovation.Excellent interpersonal and communication skills.
Please note should you not receive a response within two weeks of applying please consider your application unsuccessful.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yMDUxMDY2NTQxP3NvdXJjZT1ndW10cmVl&jid=1485052&xid=2051066541
1d
1
SavedSave
Our client in the Automotive Sector, based in Port Elizabeth, is currently looking to employ a Development Engineer.
An awesome career opportunity awaits.
Requirements:
Matric.National Diploma in Mechanical Engineering (NQF 6)Bachelor’s Degree in Engineering (NQF 7)Up to 5 years’ experience in Engineering within the Manufacturing. environment, of which 3 years should be at Supervisory level.
Responsibilities:
Engineering support services:
Defines, plans, develops, and validates products, systems, and components in accordance with Factory requirements.Defines product functional analysis to translate customer specification and internal requirements into clear product performance criteria.Designs and develops mechanical equipment by benchmarking and considering industry standards and technological advancements.Analyses customer product specifications and ensures compliance with applicable regulations.Continuous improvement and projects.Initiates continuous improvement initiatives and cost saving opportunities whilst keeping abreast of new developments / technology within the specialist field.Conducts research work and pre-feasibility studies toward improving process flow.Drives and oversees project design from start to implementation phase.Evaluates and completes projects with minimum risk, within allocated timeframes and according to specified budgetary requirements.
Compliance:
Operates within controls and procedures to ensure the integrity of company.Identifies and monitors risks within own department and area of responsibility.Assists in the maintenance of a risk register, report discrepancies or areas of concern to management.Ensures compliance with all relevant regulations (OHS act) and policy frameworks to prevent fruitless, wasteful, and irregular expenditure.
Cost and financial control:
Contributes to the budget preparation process.Promotes and communicates the effective, efficient, economical, and transparent use of financial and other resources.Monitors and controls expenditure against budget and ensures spending occurs within budgetary limits and financial guidelines, report deviations to direct Manager.Explores opportunities to control and reduce costs.
Customer service management:
Maintains effective working relationships with customers (both internal and external) towards rendering highest quality of servicesRepresents company in meetings with relevant stakeholders.Identifies and solves problems creatively whilst demonstrating a high level of i...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS84NjIzMjI3NT9zb3VyY2U9Z3VtdHJlZQ==&jid=1399024&xid=86232275
1d
Save this search and get notified
when new items are posted!