Please note that our Terms & Conditions and Privacy Notice are applicable.
Pay & Ship
Buy with confidence. Secure payment options & nationwide delivery. Learn more
Filter & refine
Clear All
Results for dab pump in "dab pump" in South Africa in South Africa
3
R 8,000
NEGOTIABLE
SavedSave
DAB E.Sybox Mini 3 with 2 years usage in good condition.
7d
Parkwood
1
R 16,766
SavedSave
Please note that shipping and installation is not included.DAB EsyBox Mini 0.75kW is the booster pump for the management of
pressurisation in home and gardening systems. In a very small space, it
utilises the most advanced DAB technology. To ensure constant pressure,
and with thanks to the integrated inverter it has an increased reduction
in noise and consumption levels. Creating two-pump groups via wireless
increases their performance, introduces the back-up function and allows
the replacement of obsolete sets.
BUILT-IN CONNECTIVITY
The Esybox Mini3 user experience is enhanced by the introduction of
built-in connectivity, through which it can connect natively to cloud
services without requiring any additional accessories.
MINIMUM SPACE REQUIREMENTS, MAXIMUM QUIET
The water-cooled engine, the variable-frequency drive electronics,
sound-proofed housing and the anti vibration feet make it an extremely
quiet booster pump that even defies the lightest sleeper. Small and
extremely compact, the Esybox Mini3 can also be installed in previously
unthinkable places.
USE
Finally DAB EsyBox Mini 0.75kW apartments with up to 3 floors, 2 bathrooms and 50 m2 of garden.
Pump Specifications:
Pump Model: EsyBox Mini3Max Input Power: 850WMotor Power: 750WLow NoiseMax Flow: 80 lt/minMax Pressure: 5.5 BarMax Fluid Temperature: 40˚CMax Ambient Temperature: 50 ˚C
7d
Mbombela / Nelspruit
1
R 34,282.99
SavedSave
Please note that shipping and installation is not included.
1d
Mbombela / Nelspruit
1
R 3,902
SavedSave
Please note that shipping and installation is not included.DAB Esydock is for systems where you want to pipe up the system now. ESYDOCK is used
to be able to mount 1 esybox. For systems where you want to pipe up.
Install the pump later or where you want to be able to change the pump
easily. Or remove it for the cold winter time.
The suction and discharge 1″ ¼ NPT connection can be made at either
side of the dock or on the same side to make piping up the dock as easy
as possible.
DAB Esydock complete with all the interfaces required for connecting
to the system. Also the maintenance has never been so simple thanks to
the rapid disconnect function to change the pump easily. Moreover
incorporating anti vibration feet to ensure the same quietness as
ESYBOX.
More About Esybox!
EsyBox by DAB is for pressurization, gardening, irrigation,
agriculture and irrigation and to draw water in residential building
service and commercial building service. It is “all-in-one” and ready to
use for an easy and efficient management of residential pressurization:
the presence of the VFD keeps the pressure constant, despite of demand.
It can be used villas and small apartment complexes with up to 6
floors and 9 apartments. It’s very easy to create two-pumps boosters
set, thanks to Esytwin the quick connection dock. Exceptional
performance in a 50% smaller size than an equivalent traditional system.
Esytank is the 480-liter tank, already supplied with Esydock, for a
quick installation of EsyBox above ground.
7d
Mbombela / Nelspruit
1
R 16,971
SavedSave
Please note that shipping and installation is not included.DAB Centrifugal single impeller K pump 4kW – three phase is suitable
for domestic, civil, industrial and agricultural systems, and for
decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB DAB Centrifugal single impeller K pump 4kW – three phase
Maximum operating pressure: 8 bar (800 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:
Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 2″
Outlet: 2″
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
8d
Mbombela / Nelspruit
1
R 1,394
SavedSave
Please note that shipping and installation is not included.First thing to remember is the DAB Esywall. Not to mention complete
wall mounting kit with brackets, screws, dowels, and two spacers for
shock absorption.
Suitable for both the esybox premium and esybox mini 3.
On the whole the E.SYWALL is a complete kit that:
Allows the E.SYBOX or E.SYBOX mini to be installed easily on the wall.Allows you to use 2 inlets with E.SYBOX or E.SYBOX mini upright
Seeing that the DAB Esybox
and Esybox Mini 3 can be easily mounted on a wall using the dedicated
Esywall bracket from Aqua perm. This wall mounting option saves space and improves installation aesthetics. The bracket is designed to secure the pump to the wall and comes with spacers for vibration absorption. The Esybox system, including the Mini 3, is versatile and can be installed vertically, horizontally, or on the wall.
Steps for Wall Mounting:
Gather your materials: You’ll need the DAB Esybox or Esybox Mini, the Esywall, and appropriate mounting hardware for your wall type. Prepare the wall: Ensure the wall is structurally sound and can support the weight of the pump and bracket. Mount the bracket: Secure the Esywall bracket to the wall using the correct hardware. Attach the pump: Carefully mount the Esybox or Esybox Mini 3 onto the bracket, ensuring it is properly secured. Connect plumbing and electrical: Follow the manufacturer’s instructions for connecting the suction and discharge pipes, as well as the electrical power supply. Test the system: Turn on the pump and check for any leaks or unusual noises.
7d
Mbombela / Nelspruit
1
R 5,984
SavedSave
Please note that shipping and installation is not included.DAB Esytwin mini is used to be able to mount 2 Qty Esybox’s side by
side. For systems where either a larger flow or a where stand-by pump is
required.
The suction and discharge 1″ ¼ NPT connection can be made at either
side of the dock or on the same side to make piping up the dock as easy
as possible.
BENEFITS:
INCREASING CAPACITYINCREASING THE RELIABILITYWIRELESS COMMUNICATION
The ESYBOX’s can comunicate with each other without a cable. By means
of wireless Communications of up to 4 ESYBOX’s that can talk to each
other to allow for easy set-up and duty rotation. thanks to the DAB
Esytwin mini
The whole pump is mounted in a sound-proof closed ABS housing.Thanks to the inverter and synchronous motor
esybox. There will be a huge energy saving with no pressure surges and
less stress on pipes & fittings.
More About Esybox Mini!
Firstly it has a different appearance than any other booster set and
is small and completely integrated. Once you install and use it, you
realize that the real difference is in the comfort and performance.All things considered Esybox Mini 3 uses the most advanced DAB
technologies to create constant pressure according to the system demands
and thus an optimization of energy consumption.
7d
Mbombela / Nelspruit
1
R 4,405.99
SavedSave
Please note that shipping and installation is not included.The new DAB Nova submersible pump 0.55kW were redesigned to mark the
occasion of forty years on the market and to make them even more
reliable, robust and ergonomic.
As has been noted high performance. NOVA and FEKA have professional
features such as the oil chamber triple seal and lubricated bearings.
Being that better protection against corrosion Motor in AISI 304
stainless steel and shaft in AISI 431 steel for better protection
against corrosion.
Technical Data
Operating range:
Flow rate up to 16 m3/h with head up to 10.2 meters
Liquid temperature range:
From 0 °C to +35 °C for domestic use. From 0 °C to +50 °C for other uses.
Output
1.1/4″ F
Pumped liquid:
Cesspool sewage water.
Max. immersion depth: 7 meters.
Maximum dry run time: 1 minute.
Protection class: IP 68.
Insulation class: F.
Free Passage: 10 mm
Most important the DAB Nova submersible pump 0.55kW line with open
impeller is suited to all clean and waste water with solids measuring up
to 10 mm. It can be used to empty tanks, vats or cisterns, drain
flooded basements, cellars and garages, and prevent flooding when
installed in rainwater wells.It can also be used as a portable pump in emergencies to drain water
out of flooded rooms. They can also be used for emptying tanks or
cisterns. The pumps are suitable for drainage of flooded basements,
cellars and garages or to prevent flooding when installed in rainwater
collector wells, which can also be used as a portable pump in emergency
situations to drain water from flooded premises.
17h
Mbombela / Nelspruit
1
Contact f/price
SavedSave
Please note that shipping and installation is not included.The new DAB Nova submersible pump 0.25kW were redesigned to mark the
occasion of forty years on the market and to make them even more
reliable, robust and ergonomic.
As has been noted high performance. NOVA and FEKA have professional
features such as the oil chamber triple seal and lubricated bearings.
Being that better protection against corrosion Motor in AISI 304
stainless steel and shaft in AISI 431 steel for better protection
against corrosion.
Technical Data
Operating range:
Flow rate up to 16 m3/h with head up to 10.2 meters
Liquid temperature range:
From 0 °C to +35 °C for domestic use. From 0 °C to +50 °C for other uses.
Output
1.1/4″ F
Pumped liquid:
Cesspool sewage water.
Max. immersion depth: 7 meters.
Maximum dry run time: 1 minute.
Protection class: IP 68.
Insulation class: F.
Free Passage: 10 mm
Most important the DAB Nova submersible pump 0.25kW line with open
impeller is suited to all clean and waste water with solids measuring up
to 10 mm. It can be used to empty tanks, vats or cisterns, drain
flooded basements, cellars and garages, and prevent flooding when
installed in rainwater wells.It can also be used as a portable pump in emergencies to drain water
out of flooded rooms. They can also be used for emptying tanks or
cisterns. The pumps are suitable for drainage of flooded basements,
cellars and garages or to prevent flooding when installed in rainwater
collector wells, which can also be used as a portable pump in emergency
situations to drain water from flooded premises.
17h
Mbombela / Nelspruit
1
R 54,257
SavedSave
Please note that shipping and installation is not included.Creating two-pump sets has never been easier with the DAB EsyBox twin
kit premium 1.1kW. Outstanding performance with a 50% smaller footprint
than equivalent traditional systems.
2 Esybox with Esytwin from DAB is a electronic pressurization set
designed for pressurization, lifting water from the underground (up to 8
m), gardening and irrigation tasks in domestic, residential and civil
and commercial areas. The group is “all included”, each Esybox includes in addition to the multi-impeller pump an expansion tank, a display and the wireless connection.
The DAB EsyBox twin kit premium 1.1kW is particularly silent and
allows to increase the water pressure in the home and to keep it
constant even in the presence of more contemporary requests, the
inverter function allows energy saving and protection against hammering. There is a wizard for the first start and the possibility to view the
alarm history. The group is easy to configure and is also equipped with
wireless connection. Possibility of remote control thanks to the DConnect service (DConnect Box supplied separately).
EsyBox is a booster pump designed for use with drinking water in
domestic systems and gardening applications. It’s a compact product with
integrated components that allows simple and efficient domestic
pressurisation management.
USEVillas and small apartment complexes with up to 6 floors and 9 apartments.
7d
Mbombela / Nelspruit
1
R 9,133
SavedSave
Please note that shipping and installation is not included.The new DAB Divertron 900 premium 0.75kW is practical to use. The new
retractable handle makes it easier to move the pump, while the hook is
designed to use a cord when the pump is lowered into a tank or well. Submersible multi-impeller pump
Features
High efficiency impellers. The techno polymer impellers are based on
in-depth research into fluid dynamics to increase performance: higher
efficiency with lower energy consumption.
New DAB Divertron 900 premium 0.75kW motor. The motor has been
redesigned to reduce consumption. But also to improve performance.
Mechanical seal. We have applied a mechanical sealing system that offers
two advantages: greater strength and durability, but also greater
efficiency, thanks to the combined action with the new hydraulics.
Integrated on/off electronics. The integrated electronic card manages
starting and stopping of the pump automatically in relation to the
water demand, without the need to install an external controller. This
prevents dry running of the pump in the event of a prolonged shortage of
water. Easier to install, and easier and safer to use.
Maximum flow rate: up to 6 m3/h
Maximum head: up to 920 WP1: up to 920 W
P2 nominal: up to 0,56 Kw (0,75HP)
Maximum immersion depth: 12 meters
Maximum ambient and liquid temperature: +40°C
Factory cut-in: 2,4 bar (±0,2)
Delivery thread: 1 inch
Pump maximum diameter: 160 mmVoltage: 230V
1d
Mbombela / Nelspruit
1
R 24,992
SavedSave
Please note that shipping and installation is not included.The first of it’s kind
DAB EsyBox Premium is a booster pump designed for use with drinking
water in domestic systems and gardening applications. It’s a compact
product with integrated components that allows simple and efficient
domestic pressurisation management.
Modular
Creating two-pump sets has never been easier with the Esytwin quick connect station. Outstanding performance with a 50% smaller footprint than equivalent traditional systems.
A Complete kit
Esytank is a 480-litre tank that comes with Esydock, for quick installation of Esybox above ground. Esytank is also
modular: additional tanks can be installed on three sides.
Use
Finally the DAB EsyBox Premium villas and small apartment complexes with up to 6 floors and 9 apartments.
Pump data
Pressure rating: 8 bar (800 kPa)Settable constant pressure from 1 to 6 barMin. fluid temperature: 0°CMax. fluid temperature: 40°CMax. Ambient temperature: 50°C
In conclusion these matching features and technology, the DAB easy
box series is one of the best pump for domestic use to bring running
water to your household. However, every specific use needs analysis from
technical personnel to ensure the pump will meet the needs of the
client. Compact and completely integrated, it’s suitable for use with
drinkable water, in domestic systems and gardening applications.
Managing the water pressure in your home has never been so easy and
quiet.
Pump connections:
Suction side : 1″
Discharge side : 1″
7d
Mbombela / Nelspruit
1
R 2,986
SavedSave
Please note that shipping and installation is not included.The new DAB Nova submersible pump 0.20kW were redesigned to mark the
occasion of forty years on the market and to make them even more
reliable, robust and ergonomic.
As has been noted high performance. NOVA and FEKA have professional
features such as the oil chamber triple seal and lubricated bearings.
Being that better protection against corrosion Motor in AISI 304
stainless steel and shaft in AISI 431 steel for better protection
against corrosion.
Technical Data
Operating range:
Flow rate up to 16 m3/h with head up to 10.2 meters
Liquid temperature range:
From 0 °C to +35 °C for domestic use. From 0 °C to +50 °C for other uses.
Output
1.1/4″ F
Pumped liquid:
Cesspool sewage water.
Max. immersion depth: 7 meters.
Maximum dry run time: 1 minute.
Protection class: IP 68.
Insulation class: F.
Free Passage: 5mm
Most important the DAB Nova submersible pump 0.20kW line with open
impeller is suited to all clean and waste water with solids measuring up
to 10 mm. It can be used to empty tanks, vats or cisterns, drain
flooded basements, cellars and garages, and prevent flooding when
installed in rainwater wells.
It can also be used as a portable pump in emergencies to drain water
out of flooded rooms. They can also be used for emptying tanks or
cisterns. The pumps are suitable for drainage of flooded basements,
cellars and garages or to prevent flooding when installed in rainwater
collector wells, which can also be used as a portable pump in emergency
situations to drain water from flooded premises.
17h
Mbombela / Nelspruit
1
R 4,690
SavedSave
Please note that shipping and installation is not included.The new DAB Feka submersible pump 0.55kW were redesigned to mark the
occasion of forty years on the market and to make them even more
reliable, robust and ergonomic.
The submersible pump of the FEKA series is suitable for lifting
sewage water from cesspools, and is capable of handling suspended solid
matter with size up to 25 mm.
As has been noted high performance. NOVA and FEKA have professional
features such as the oil chamber triple seal and lubricated bearings.
Being that better protection against corrosion Motor in AISI 304
stainless steel and shaft in AISI 431 steel for better protection
against corrosion.
Technical Data
Operating range:
Flow rate up to 16 m3/h with head up to 7.5 meters
Liquid temperature range:
From 0 °C to +35 °C for domestic use. From 0 °C to +50 °C for other uses.
Output
1.1/4″ F
Pumped liquid:
Cesspool sewage water.
Max. immersion depth: 7 meters.
Maximum dry run time: 1 minute.
Protection class: IP 68.
Insulation class: F.
Free Passage: 25 mm
Most important the DAB Feka submersible pump 0.55kW with back flowing
impeller is suited to all clean and waste water loaded with solids
measuring up to 25 mm.It can be used to empty tanks, vats or cisterns,
drain flooded basements, cellars and garages, and prevent flooding when
installed in rainwater wells.It can also be used as a portable pump in
emergencies to drain water out of flooded rooms where there is mud or
detritus.
Domestic waste waterRainwater or groundwaterEmptying of wells or collection tanksEmptying of swimming pools or rooms prone to flooding
17h
Mbombela / Nelspruit
1
R 8,687
SavedSave
Please note that shipping and installation is not included.DAB Esytwin premium is used to be able to mount 2 Qty Esybox’s side
by side. For systems where either a larger flow or a where stand-by pump
is required.
The suction and discharge 1″ ¼ NPT connection can be made at either
side of the dock or on the same side to make piping up the dock as easy
as possible.
BENEFITS:
INCREASING CAPACITYINCREASING THE RELIABILITYWIRELESS COMMUNICATION
The ESYBOX’s can comunicate with each other without a cable. By means
of wireless Communications of up to 4 ESYBOX’s that can talk to each
other to allow for easy set-up and duty rotation. thanks to the DAB
Esytwin premium
The whole pump is mounted in a sound-proof closed ABS housing.Thanks to the inverter and synchronous motor
esybox. There will be a huge energy saving with no pressure surges and
less stress on pipes & fittings.
More About Esybox!
EsyBox by DAB is for pressurization, gardening, irrigation,
agriculture and irrigation and to draw water in residential building
service and commercial building service. It is “all-in-one” and ready to
use for an easy and efficient management of residential pressurization:
the presence of the VFD keeps the pressure constant, despite of demand.Finally it can be used villas and small apartment complexes with up
to 6 floors and 9 apartments. All in all it’s very easy to create
two-pumps boosters set, thanks to Esytwin the quick connection dock.
Exceptional performance in a 50% smaller size than an equivalent
traditional system. Esytank is the 480-liter tank, already supplied with
Esydock, for a quick installation of EsyBox above ground.
7d
Mbombela / Nelspruit
1
R 4,630
SavedSave
Please note that shipping and installation is not included.First thing to remember the DAB Novapond submersible pump 0.2kW is
specifically designed for the re circulation of water in ponds. To
create waterfalls and water features. They are designed to pump clean
water containing solid particles with a maximum diameter of 10 mm.
Suitable for continuous operation. Designed for horizontal or vertical
installation. Environmentally safe. Materials resistant to corrosion and oxidation. Motor with thermal
overload protection. Adjustable suction filter to enable transit of
solid particles with a diameter from 5 mm to 10 mm. Supplied with power
cable and plug, and self-sealing coupling.
Construction features of the pump
Hydro resistant techno polymer pump body, wear-free impellers, cover,
and suction grid. Corrosion and oxidation resistant materials.
Construction features of the motor
Submersible type continuous duty asynchronous motor. Thermal overheating protection. Wear-resistant motor shaft.
Technical Data of the DAB Novapond submersible pump 0.2kW
Operating range: From 1 to 14 m³/h with head up to 9.4 meters. Suitable for continuous operationLiquid temperature range: From 0 °C to +35 °C.Pumped liquid: Clean water, without fibers and with particles with maximum diameter of 10 mmMaximum immersion depth: 7 meters. Power input 50 Hz: 1 x 230 VHP 0.28In & Outlet: 1.1/4″Water Quality: Designed to pump clear water with soft solid particles up to 10mm in diameterConstruction: Made from corrosion and oxidation-resistant materials, including stainless steel componentsSubmersible pumps work by
converting rotary energy into kinetic energy to push fluids upwards.
They are designed to be submerged in the liquid, which allows them to be
self-priming. Meaning they don’t require a suction pipe or manual
priming before use. Includes thermal overload protection, an adjustable suction filter, and a long power cable with a plug.
1d
Mbombela / Nelspruit
1
R 4,874
SavedSave
Please note that shipping and installation is not included.First thing to remember is the DAB nova for salt water 0.2kW a multi-
purpose submersible pump specifically constructed for use in salt
water. Furthermore anti-corrosive and rust-proof materials. As well as
motor casing, shaft, screws and nuts made of stainless steel AISI 316.
The pumps are designed to pump clean water or water containing solids
with a diameter from 5 to 10 mm.
Cable with tin plated conductors. Motor with thermic overload
protection. Wear resistant shaft and impeller. Excellent cooling of the
motor that enables the pump to operate even when it is partially
submersible. Manual and automatic version with start/stop float switch.
Supplied with power cable with plug and self-sealing fitting.
Technical Data of the DAB nova for salt water 0.2kW
Operating range: from 1 to 7.5 m3/h with head up to 6 meters.
Liquid temperature range: from 0 °C to +35 °C for domestic use.
Pumped liquid: dirty water, without fiber, including salt water.
Max. immersion depth: 7 meters.
Power input: 1 x 230 V
Application
The vertical delivery draining submersible pump has been specifically
built for draining applications in salt water installations. It may
also be used as a portable pump in emergency situations. The built-in
float level switch, in the automatic version, allows fixed installation,
ensuring automatic operation.
Construction features of the pump
Hydro resistant techno polymer pump body, cover, and suction grid.
AISI 316 stainless steel motor, rotor shaft, and bolts and screws.
Cable with tin plated conductors.
Construction features of the motorFinally submersible type continuous duty asynchronous motor. Thermal overheating protection.
1d
Mbombela / Nelspruit
1
R 43,394
SavedSave
Please note that shipping and installation is not included.
8d
Mbombela / Nelspruit
1
R 46,547
SavedSave
Please note that shipping and installation is not included.DAB centrifugal single impeller K pump 9.2kW – three phase is
suitable for domestic, civil, industrial and agricultural systems, and
for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal single impeller K pump 9.2kW – three phase
Maximum operating pressure: 8 bar (800 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:
Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 2.1/2″
Outlet: 2″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
8d
Mbombela / Nelspruit
1
R 15,939
SavedSave
Please note that shipping and installation is not included.DAB centrifugal single impeller K pump 3kW – three phase is suitable
for domestic, civil, industrial and agricultural systems, and for
decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal single impeller K pump 3kW – three phase
Maximum operating pressure: 10 bar (1000 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:
Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 2″
Outlet: 1.1/4″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
8d
Mbombela / NelspruitSave this search and get notified
when new items are posted!