Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Results for welding jobs in Construction & Trade Jobs in Eastern Cape
SavedSave
A busy workshop in East London is looking for a
permanent Diesel
Mechanic.
This position will require travelling to our project sites throughout the
Eastern Cape, which may include overtime and overnight travel.
Candidates must have a clear criminal record, be in
good health & be in possession of a valid driver’s licence.
Requirements:
Trade tested diesel mechanic with 8 – 10 years of (mechanical,
hydraulic, and electrical) experience. MUST INCLUDE YELLOW PLANT AND TRUCK
EXPERIENCE. Work will also include services and repairs to small plant.Must be able to overhaul engines, perform services, correctly
diagnose faults, and carry out maintenance & repairs on both trucks
and yellow plant.General working knowledge of auto electrical systems (ignition,
starting, charging, illumination).Ability to identify and correctly utilise relevant diagnostic
equipment and specialised tools (candidate to have their own basic tools).Valid drivers’ license, code 8 or above.Experienced in the operation of a variety of tools, welding
equipment, etc.Maintain work area in clean and orderly condition.Highly organised and self-motivated; working unsupervised whilst
using own initiative and problem-solving skills.Ability to effectively manage time and administration related to
job cards, etc.Ability to execute job function with urgency but ensuring that
quality of work is not compromised.Willing to travel out of town for breakdowns.Working Monday to Saturday, willing to work after hours for
breakdowns / overtime.Ability to manage sub-ordinates (if the need arises).Salary is negotiable (dependent on experience, qualifications, and
capabilities).
Responsibilities:
Maintain, service, & repair plant & equipment, systems, &
products on company premises or at sites in a timely, cost-effective
manner so that project requirements are met.Maintain vehicle records / completing job cards.Servicing of plant, vehicles and equipment and maintaining
serviceability to specified standards and according to set procedures by
delivering quality service / maintenance.Perform accurate diagnosis / troubleshooting in event of breakdown
of equipment; communicate what repairs are needed by advising workshop
manager.Maintain vehicle maintenance and operational data / history by
updating and timeously communicating information that must go on record.Ensure proper communication between self and workshop manager.
To Apply:
Send CV
with contactable references & salary expectation to: workshop@gscivils.co.za.Use reference EL Mechanic in the subject line.Applications close at 13:00 on 13 May 2024.Immediate start, where possible.If you do not receive a response, please consider your application
unsuccessful.
11d
Ads in other locations
SavedSave
Position available for an experienced foreman at a turn key construction company with divisions in la lucia and cornubia
Requirements:
1. Valid drivers license
2. The applicant should ideally be skilled in one or more of the ffg areas i e tiling, plastering, painting, building, plumbing, welding, shop fitting, concreting
3. Willing to work out of Durban
It is preferable that the applicant resides in phoenix / surrounding areas.
Salary negotiable based on experience.
Applications strictly via email.
Email detailed CV together with copies of ID and drivers license to jobs.mlncontractors@gmail com
8h
1
SavedSave
Job description:
DC Meat is looking for a Maintenance Technician in Paarl.
Our on-site team maintain our Paarl facility and equipment to ensure smooth and safe operation. We are now looking for a service-minded Maintenance Technician to join our team and assist with the daily maintenance operations and repairs.
Key Performance Areas:
· Mechanical Repairs, Checks and Maintenance
· Electrical Repairs, Checks and Maintenance
· Plumbing Repairs, Checks and Maintenance
· Refrigeration Repairs, Checks and Maintenance
· Boiler Repairs, Checks and Maintenance
· Daily Checks, Greasing, Tool Change and Machine setup
Qualification or Skill Required:
· Matric
· 2-3 years’ work experience
· General Knowledge of the operation of food production equipment
· Conceptual/ Analytical Thinking
· Ability to work in a team
· Good information gathering, problem analysis and problem-solving skills
· Excellent time management skills
· Attention to detail
· Physical Stamina and Strength
· Electrical, Plumbing and/or Welding qualifications preferable
Responsibility:Responsibilities:
· Ensure quick turnaround time for equipment breakdowns,
· Read and understand written comments and instructions,
· Ensure that the personal protection, food and equipment safety policies are followed at all times,
· Monitor and maintain all safety and preventative maintenance schedules/systems,
· Ability to work shifts and overtime when required,
· Work in a fast-paced environment under pressure,
· Follow standardized work and adhere to safe working practices continuously,
· Perform necessary pre-operation activities to ensure proper equipment startup and operation on equipment.
· All employees at DC Meat are subject to daily Breathalyzer testing.
Job Reference #: Main2Consultant Name: Chantel Brown
2d
5
SavedSave
Handymany in need of job permanent or temporary, 8years of experience as plumber. Tiler, a bit of welding, painting, paving, and also can be able to work work with any power tools,i can also be able to work under pressure anywhere anytime.... Plz if you need 1 contact me on 0833807896
2d
SavedSave
Need an experienced Workshop and Maintenance engineer to join our team.Must be excellent in the following:*Fitting and Turning on mill and lathe*Hydraulics and Pneumatics*Welding*Working on packaging and print machinery and equipment will be advantageous Please send CV's via gumtree and I will contact suitable candidates Many thanks
3mo
The company was formed in 1996 to provide a service to heavy industry, light industry and commercial businesses.
Our core business is the testing, maintenance, repairs and installations of low and medium voltage switchgear and
associated equipment up to 132KV.
MINIMUM REQUIREMENTS: 1. Must have a minimum of 5 years’ experience as per responsibilities below
2. Must have passed a recognised fitter and turner trade test 3. Ability to read & interpret specifications & drawings 4. Must be able to problem solve 5. Must have thorough understanding on engineering shop machines/tools 6. Must be computer literate 7. Be in position of a valid driver’s licence PERSONAL REQUIREMENTS: 1. Willing to work long unpredictable hours when required 2. Have initiative,energy,be self-motivated and be passionate about their work3. Can work well under pressure 4. Have good organisational skills 5. Work well with peers and customers THE RESPONSIBILITIES ARE TO RUN THE MACHINE WORKSHOP AS PER FOLLOWING REQUIREMENTS: 1. Co-ordinate and manage the machine shop 2. Plan and schedule incoming work to ensure you meet monthly targets as per management 3. You personally will need to machine / fabricate / repair to reach monthly targets 4. You will also be responsible to allocate and supervise work allocated to you staff 5. Carry out relevant administration processes including cost sheets & quotes required to run the department 6. Ordering & receiving of materials 7. Adhere to all organisation policies and procedures 8. Work within agreed codes, law, working practices and health and safety SPECIFIC WORK DONE IN THE MACHINE SHOP: 1. Turning – Milling – Drilling of all types of materials 2. Knowledge of tool making 3. Machining of new components from technical drawings 4. Hydraulic experience with cutters, benders, punches etc 5. Assemble – Welding - Grinding of panels and bases from laser cut materials 6. Repairs to equipment by welding and machining 7. Perform general maintenance to all equipment and tools in the machine shop COMPETENCY TEST REQUIREMENTS SHOULD YOU BE ACCEPTED FOR AN INTERVIEW: 1. Multiple choice test 2. Practical mechanical tests 3. Practical electrical tests 4. Practical computer tests APPLICATIONS MUST CONTAIN THE FOLLOWING DOCUMENTATION:
• Comprehensive CV including copies of all qualifications
• Work references with contact names & numbers
• Last payslip received APPLICATIONS TO BE SENT TO: rivash@amjelectrical.co.za (: )
Please consider your application unsuccessful should you not have been contacted within 2 weeks of
the . We will keep your CV on our database and contact you should you match the criteria
of any other vacancies.
21d
5
SavedSave
We need a metal fabricator to assist
with the following:
Fabricate metal gates and balustrades.General metal fabrication.
The criteria for the position:
Have at least 3 years’ experience in gates and balustrades
manufacturing.Have MIG welding experience.Tig welding not essential but will be of an advantage.Be able to read shop drawings.Work to accurate measurements.
In return we offer the following:
Competitive salaryPleasant working environment
Send CV to: info@schmidtcustom.com
24d
6
Expectation and responsibility of the role include:
-Must have 5-10 years post apprenticeship experience
-Replacing and repairing of panels; straightening and filling
-Completing body alignment
-Welding and bonding
-Filler work, dent removal and pin pulling
-Ensuring vehicles are thoroughly examined and reporting orally/in writing on general condition of vehicles with emphasis on customer safety and satisfaction
-Must be able to carry out large repairs to detail
-Working in a manner consistent with the minimisation of lost, non-revenue and/ or diversionary time, recording all such time in an accurate and complete manner.
-Keeping work areas clean and tidy, well organised and safe from hazards to Health and Safety.
If you are sure you possess the above listed expectation, do e.mail or WhatsApp cv and a brief details of what you are most confident to do to.
hiroadsolutions@gmail or 0615879643.
17d
1
SavedSave
AANKOPER:
MEGANIESE ONDERDELE
- Min 3-5jr meganiese
werktuigkundige ondervinding.
- Min 3jr ondervinding as
aankoper van meganiese onderdele.
- Meetbare kennis van geel
masjienerie asook voertuig onderdele.
- Goeie kommunikasie
eienskappe en onderhandelingsvermoëns.
- Moet onafhanklik- en onder
druk kan funksioneer .
- Rekenaar geletterdheid.
- Ingesteldheid op
akkuraatheid en netheid.
DIESELWERKTUIGKUNDIGE
- Dieselwerktuigkundige
kwalifikasie en min. 5 jaar ondervinding in alle aspekte van herstelwerke,
welding en instandhouding van geel
konstruksievoertuie, -toerusting en swaarvoertuie.
- Ondervinding in hidroliese
en elektroniese tegnologie op nuwer toerusting en voertuie * Meganiese
aanleg en vermoë om probleme te diagnoseer en op te los * Vermoë om
onafhanklik te werk en
onder druk te funksioneer, asook goeie
mense verhoudinge te handhaaf
* Bereid wees om oortyd
te werk en moet sober gewoontes hê *
Rekordhouding van dienste en herstelwerke
op alle toerusting en voertuie is 'n
vereiste.
Ons bied bo-gemiddelde
vergoedingspakkette, asook standvastige loopbaan geleenthede.
Epos CV na
recruit@jvzconstruction.co.za
5mo
4
SavedSave
I'm Aubrey 38yrs, Malawian, with 9yrs experience in gardening, paving, waterproofing, electrical, plumbing, welding, roofing, carpentry pool cleaning, building and other handyman jobs,refs available, please call or watsap 0788322455, thanks
8mo
Save this search and get notified
when new items are posted!