Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Results for mechanical engineer in Construction & Trade Jobs in East London
SavedSave
A busy workshop in East London is looking for a
permanent Diesel
Mechanic.
This position will require travelling to our project sites throughout the
Eastern Cape, which may include overtime and overnight travel.
Candidates must have a clear criminal record, be in
good health & be in possession of a valid driver’s licence.
Requirements:
Trade tested diesel mechanic with 8 – 10 years of (mechanical,
hydraulic, and electrical) experience. MUST INCLUDE YELLOW PLANT AND TRUCK
EXPERIENCE. Work will also include services and repairs to small plant.Must be able to overhaul engines, perform services, correctly
diagnose faults, and carry out maintenance & repairs on both trucks
and yellow plant.General working knowledge of auto electrical systems (ignition,
starting, charging, illumination).Ability to identify and correctly utilise relevant diagnostic
equipment and specialised tools (candidate to have their own basic tools).Valid drivers’ license, code 8 or above.Experienced in the operation of a variety of tools, welding
equipment, etc.Maintain work area in clean and orderly condition.Highly organised and self-motivated; working unsupervised whilst
using own initiative and problem-solving skills.Ability to effectively manage time and administration related to
job cards, etc.Ability to execute job function with urgency but ensuring that
quality of work is not compromised.Willing to travel out of town for breakdowns.Working Monday to Saturday, willing to work after hours for
breakdowns / overtime.Ability to manage sub-ordinates (if the need arises).Salary is negotiable (dependent on experience, qualifications, and
capabilities).
Responsibilities:
Maintain, service, & repair plant & equipment, systems, &
products on company premises or at sites in a timely, cost-effective
manner so that project requirements are met.Maintain vehicle records / completing job cards.Servicing of plant, vehicles and equipment and maintaining
serviceability to specified standards and according to set procedures by
delivering quality service / maintenance.Perform accurate diagnosis / troubleshooting in event of breakdown
of equipment; communicate what repairs are needed by advising workshop
manager.Maintain vehicle maintenance and operational data / history by
updating and timeously communicating information that must go on record.Ensure proper communication between self and workshop manager.
To Apply:
Send CV
with contactable references & salary expectation to: workshop@gscivils.co.za.Use reference EL Mechanic in the subject line.Applications close at 13:00 on 13 May 2024.Immediate start, where possible.If you do not receive a response, please consider your application
unsuccessful.
4d
1
SavedSave
East LondonPlan and carry out daily mechanical and electrical maintenance to all plant machinery.Responsibilities:Ensuring Preventative Maintenance is carried out according to schedules for both mechanical and electrical.Frequently check stock levels for all spares/materials and order in time.Assisting the Maintenance Manager in periodic trend analysis of breakdowns and expenditure with recommendations for continual improvement.Involvement in daily emergencies and urgent work requests.Completion of basic preventative maintenance.Ensuring 5S System and safe working standards are adhered too at all times.Keeping the Maintenance Manager informed of abnormal or critical situations and seeking advice on matters outside the Planners knowledge or authority.Ensuring maintenance procedures and documentation complies with relevant Quality Assurance standards and Safety Standards.Electrical installations and PLC’s.Mechanical installations.General buildings and all utilitiesComply with OHS Act Regulations and other Legislation.Involve with all new projects etc.Accurately carry out maintenance schedules for production machinery and services (Electrical and Mechanical)Carry out lubrication schedules.All work must be performed safely according to all safety regulations.Speedily rectify breakdowns and after hours call outs.Weekly shift and stand by duty to be performed as perAdhere to Company HSEE policy.Perform shift and standby call out duties.Working overtime when required as agreed by Plant Engineer.Requirements:N4 in Mechanical/Electrical Engineering – Trade Tested or similar5 years’ experience in a factory maintenance environmentComputer literacy is a must.Ability to learn fast and be independentExcellent leadership and organizational skillsExcellent verbal and written communication skills.Experience in Computerized Maintenance Management Systems preferred.Own transport is essential
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQ2NzQyX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1176110&xid=1266_46742
2y
1
Advanced Manufacturing Engineer (Injection Moulding)Advanced Manufacturing Engineer (injection moulding) required for leading automotive company based in Pretoria. You will be responsible for monitoring and auditing manufacturing best practices and standards in the plant as well as setting up injection moulding processes to meet end product specification requirements.Responsibilities:Generate documentation on mold runs for traceability and reproducibilityWork with Quality and manufacturing departments to ensure the quality of production and products produced meet company standardsWork with production personnel to ensure molded components meet requirements and make adjustments as neededProcess development and assembly sequencing (process flow chart) for new programsUse industrial engineering methods to achieve workstation takt timeManufacture feasibility analysis (DFA/DFM) and PFMEA on new productsPlant and process layout for new products and plant launchesWrite process specifications and make recommendations regarding ergonomic improvementsWrite specifications for injection molding equipment and make recommendations for equipment procurement, including drying and feeding, cooling systems and regranulation systemsSimulate continuous improvement process in plants (KAIZEN, DO IT) with the objective of MEQWork with SDT (Simultaneous Development Team) to complete product launchesCalculate MBOM’s (Mini Bills Of Materials) for new products and work with the SDT in loading of MBOM’s into the MMS (Material Management System)Conduct MBOM audits of partsMonitor injection moulding equipment through production start-upStimulate TPM in new projectsImprovement strategies: Participate and/or lead activities for manufacturing footprint analysis, continuous improvement of new and/or ongoing manufacturing process and lean manufacturing implementationStandardize and implement manufacturing tool boxUnderstand and conform to Quality System requirements specific to process engineeringRequirements:Engineering Degree or Diploma (NQF level 5) in injection moulding, mechanical or industrial field or equivalent experienceAt least 3 years’ experience in automotive industryAt least 3-5 years’ experience as Injection mould process Engineer within the automotive industrySetting of Engel and Apex robots would be an advantageAdvanced computer literacy skills, including AUTOCAD or similarKnowledge of injection molding machines, minimizing losses and write-offsMust be able to operate injection molding equipmentAttractive package on offerShould you wish to apply please email your CV through to recruiter2@profilepersonnel.co.zaOnly shortlisted candidates will be contacted.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzM5ODAwX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1138951&xid=1266_39800
2y
Ads in other locations
1
SavedSave
Applications are invited from suitably qualified & experienced employees to fill the above vacancy in Production – Final Assembly Job Description and ResponsibilitiesFor Bolting related changes (new model introduction, PDM Changes, etc.), update TORIS Matrices (Torque parameters per fastening of bolts) and ensure TORIS daily sample adherence to Group Standard. Liaise with relevant stakeholders to ensure that Process documentation such as Control Plans, MAC and SOS Sheets are maintained/updated regularly and that the Bolting problems are sufficiently addressed.Continuously monitor, update and calibrate Electronic Torque Transducers and DataMyte to ensure conformance to quality standards. Ensure proper protection of equipment to avoid damages and scratches.For proper analysis and feedback on TORIS Inspection data, ensure consistent downloading of Torque data from DataMyte onto computer through SPC Management software.Perform Annual review of TORIS Torque Verification Specifications to ensure the set-up specification stays relevant.For samples found to be out of specification, ensure that the necessary verification processes are followed by TORIS Inspectors that Production is informed of non-conformance and that actions are taken to address the risk. Where A & B Category Bolts are not performed with Smart Tools, ensure that the necessary controls are put in place to ensure adherence to Quality Requirements.Coordinate Bolting parameter changes on Torque Controllers in Final Assembly, document changes according to appropriate Quality Managements System requirements and ensure communication to all relevant stakeholders.Update Bolting Work Instructions, review FIS-eQS Bolting descriptions and Bolting Reports.Ensure continuous improvement of Bolting Processes, compliance to VW Bolting Standards and adherence to Bolting KPI’s. Form part of team for Audit Preparations; accompany auditors when requested and action Bolting relating findingsEducation and ExperienceA National Diploma/ Degree in Mechanical / MechatronicsMinimum 5 years’ experience in manufacturing industry.Experience in a maintenance / production environment.Skills, Attributes & Other requirementsESSENTIAL:Be proficient in MS Office, specifically MS Excel.Have a sound knowledge of SQL, with the ability to construct and write queries against various databases.Have a strong analytical and problem solving abilityHave knowledge of the companies processes, of Material properties, Tensile Strength and Hardness that can affect Bolting applications.Have good communication, presentation skills and be a strong team player.PREFERRED:Basic knowledge of the DAR system would be an advantage.Basic knowledge of the German language would be an added advantage Please forward CV and ALL supporting documentation to, recruiter@profilepersonnel.co.za. Should you not hear from Profile Personnel within 14 days please consider your application unsuccessful for the vacancy. Please note all applications will automaticall
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQ1NjAzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1168364&xid=1266_45603
2y
1
SavedSave
BerlinRole Responsibilities To work within the guidelines of the company’s EHS & quality systems.Support and assist with the production of and continuous development of activities undertaken with Mechanical Service.Supporting the execution of service to achieve KPIs, strategic and business objectives.Undertake technical training courses and qualifications as required with the aim of continued personal development.Support Root Cause Analysis and Failure Mode Effects Analysis processes into site occurrences and incidents as required.Adhering to and ensuring QHSE compliance for all service engineering activities.Ensure all tools, equipment and apparatus are maintained in line with best practice and applicable statutory requirements.Support other areas of the business as and when required’Utilise precision equipment, such as callipers, verniers, and micrometers.Interpret complex drawings, sketches and perform layout work.Work and operate cutting equipment, welding machinery and measuring tools.Produce work and document following established procedures.Perform fitting of structural components using tools and required methods for the assembly.Perform work following all safety procedures and policies. Maintain a clean orderly work area.Perform other duties as necessary. Enforce and practice company work instructions and any quality control system programs that are implemented by the company. Inspect repairs, replaces, installs, and maintains all mechanical components, assemblies on turbines and associated packages.Works with quality control on quality of product and specific problems.Reads and interprets drawings and schematics.Assist the workshop in any mechanical and electrical assembly as needed.Maintain and obey safety standards.Work and communicate with Engineering, QC, Material Control and other crafts in production.Maintain hand tools and machinery required for production.Assist doing alignments and parts Installation.Work rotating Shifts when requiredPerform standby dutiesMinimum requirements:Trade Tested Fitter and TurnerMinimum 5 years post trade test experience in a maintenance environmentExperience in welding and cutting tools and processes
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQ5MTM4X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1185613&xid=1266_49138
2y
1
Maintenance Technician (Port Elizabeth)Summary of Roles & ResponsibilitiesAnalyse programmable logic controller programs for the purpose of modification, designing, fault finding and error proofing on machines and equipment.• Correct various program logic, electronic and electrical type of faults on machines in order to support safety, quality and production.• Plan and develop PLC installations for replacement or modifying of current equipment in the Plant.• Program drives, to optimise reliability and efficiency.• Backup programs on all Robots and PLC applications in plant and load onto Plant server system.• Update all the relevant documentation for any software and hardware changes made on plant equipment.• Check and compile information on systems, validate safety requirements drawings and computer programs.• Do program changes on PLC’s and program robots as requested from ME, process and production.• Assess breakdown root cause and develop countermeasures to prevent reoccurrence.• Assist and support artisans in fault finding and breakdowns.• Establish and maintain electronic maintenance schedules for equipment within the area of responsibility.• Establish and maintain a stock of electronic spare parts required to ensure continuous availability of machinery.• Assist and support Contractors with new installations and do validation and as building after completion of projects.• Develop efficiency improvement initiatives by effective utilization of utilities, materials and resources.• Read and understand technical manuals for equipment operations and maintenances.• Understanding of BMS procedures, policies and the companies Manufacturing Systems (IMS)• Project manage contractor software development and equipment installation.• Understand resistance welding process and set upRequirements: At least 4 years of experience as a artisan.• Completed a diploma in a relevant tertiary education (Mechatronic / Electrical Engineering) diploma/N6 electrical level.• High level of Competence on Fanuc Robots.• Knowledge of analog systems.• Knowledge of networks and PLC communication systems• Computer literacy, knowledge and experience in Word, Excel, PowerPoint, and Windows.• Knowledge of OHS act and its regulations, safety systems and standards.• Able to work overtime and rotating shifts as required• Good interpersonal and leadership skills• Demonstrated history of flexibility and adaptability in setting priorities and managing multiple tasks under pressure• Must be available after hours and weekend workCompetencies & Skills• Knowledge of programming logic controllers, robotics/control & automation equipment.• Sound mechanical experience would be advantageous• Competent and be able to manipulate and program Fanuc Robots.• Understand networks• Successfully completed a recognised mechanical or electrical learner ship or diploma within a maintenance environment, two years served in the automotive industry.• Experience within a highly automated environment, including
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQ4NzM1X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1184101&xid=1266_48735
2y
1
SavedSave
Reliability Engineer (Permanent)Responsibilities:Work closely with other functional areas including Aftersales to identify top product issues to be investigated.Conduct independent investigations and solve technical problems on vehicles, sub-systems and components following disciplined problem solving methodologies with a high level of engineering expertise.Clearly identify problem root cause/s.Regularly provide actionable technical feedback.Implement plant and field containment and solutions for all open product problems.Work closely with solution owners including other functional areas and source plants to ensure corrective actions are robust and implemented in a timely manner.Requirements:National Diploma or Degree in Mechanical, Electrical or Mechatronics Engineering.Minimum 5 years’ experience in automotive - Quality and /or Engineering disciplines.Aftersales Field Service Engineering and / or Technical Support experience is an advantage.Good knowledge of warranty data analysis and competitive customer surveys.Good knowledge of Isuzu Warranty Systems and dealer claims process.Basic knowledge of GART, TrackerGART, and other process toolsGood oral and written communication / presentations skills.Code B and EC drivers licenses.Competencies & SkillsHigh degree of planning and creative ability and disciplineHigh level of analytical ability to solve product problems at vehicle, sub-system and component levelsKnowledgSkilled in Advanced Excel including e of Design for Six Sigma, Failure Mode and Effects Analysisthe use of pivot charts and tables.Skilled in the use of Product Problem Resolution methods and tools.Understand vehicle and components function, validation and test methodsUnderstand component and sub-system failure modesConduct vehicle, sub-system and component test and validation to support failure investigationsUnderstand manufacturing processesConduct plant auditsPossess a high level of subject matter knowledgeCustomer focused & results drivenWork flexible hours when required to meet deadlinesWork under pressureWork independentlyHigh level of interpersonal skills to work effectively with others including cross functional teams and the dealer networkGood personal initiative and judgementGood knowledge of PowerPoint, Word and Outlook.Experience with vehicle diagnostic tools e.g. GIDSS.Please forward CV and ALL supporting documentation to, recruiter@profilepersonnel.co.za.Should you not hear from Profile Personnel within 14 days please consider your application unsuccessful for the vacancy. Please note all applications will automatically be added to our database for future vacancies.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQ0NzIzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1164762&xid=1266_44723
2y
1
Maintenance Technician (Port Elizabeth)Analyse programmable logic controller programs for the purpose of modification, designing, fault finding and error proofing on machines and equipment.• Correct various program logic, electronic and electrical type of faults on machines in order to support safety, quality and production.• Plan and develop PLC installations for replacement or modifying of current equipment in the Plant.• Program drives, to optimise reliability and efficiency.• Backup programs on all Robots and PLC applications in plant and load onto Plant server system.• Update all the relevant documentation for any software and hardware changes made on plant equipment.• Check and compile information on systems, validate safety requirements drawings and computer programs.• Do program changes on PLC’s and program robots as requested from ME, process and production.• Assess breakdown root cause and develop countermeasures to prevent reoccurrence.• Assist and support artisans in fault finding and breakdowns.• Establish and maintain electronic maintenance schedules for equipment within the area of responsibility.• Establish and maintain a stock of electronic spare parts required to ensure continuous availability of machinery.• Assist and support Contractors with new installations and do validation and as building after completion of projects.• Develop efficiency improvement initiatives by effective utilization of utilities, materials and resources.• Read and understand technical manuals for equipment operations and maintenances.• Understanding of BMS procedures, policies and the companies Manufacturing Systems (IMS)• Project manage contractor software development and equipment installation.• Understand resistance welding process and set upRequirements: At least 4 years of experience as a artisan.• Completed a diploma in a relevant tertiary education (Mechatronic / Electrical Engineering) diploma/N6 electrical level.• High level of Competence on Fanuc Robots.• Knowledge of analog systems.• Knowledge of networks and PLC communication systems• Computer literacy, knowledge and experience in Word, Excel, PowerPoint, and Windows.• Knowledge of OHS act and its regulations, safety systems and standards.• Able to work overtime and rotating shifts as required• Good interpersonal and leadership skills• Demonstrated history of flexibility and adaptability in setting priorities and managing multiple tasks under pressure• Must be available after hours and weekend workCompetencies & Skills• Knowledge of programming logic controllers, robotics/control & automation equipment.• Sound mechanical experience would be advantageous• Competent and be able to manipulate and program Fanuc Robots.• Understand networks• Successfully completed a recognised mechanical or electrical learner ship or diploma within a maintenance environment, two years served in the automotive industry.• Experience within a highly automated environment, including PLC’s, Robotics, SCADA, HMI’s Pneu
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQzODUzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1159619&xid=1266_43853
2y
1
SavedSave
Our client in the Renewable Energy industry, based in Molteno, has a position available at their company for a Wind Farm Technician (HV). Role Description:Travel to site and undertake, routine inspections, fault diagnosis, and reactive maintenance on HV/MV work.Provide operational and technical support.Respond and attend site outside normal working hours to undertake reactive maintenance and switching activities at the substation.Perform planned substation shutdowns, coordinate, supervise third parties and generate reports.Assist with turbine tasks and perform inspections as directed by the site manager. Key Responsibilities:Participate in the necessary scheduled and reactive maintenance tasks related to the electrical balance of plant (eBOP) components and other site equipment.Assist in ensuring that all works carried out by contractors and suppliers are done to an acceptable standard.Undertake initial investigations and participate in root cause analysis, problem-solving, and repairs to electrical and mechanical components.Record all eBop events and give an update to the site managerIdentify and report existing and anticipated problems with substation and wind turbine MV-HV equipment, which includes inspections, etc.Daily, weekly, monthly and annual inspections of key EBOP components as per operating and maintenance manuals and submit reports to GMR2.1 and the Site managerReviews relevant material (manuals, blueprints, schematics) to determine tasks, tools, equipment, and parts needed to maintain the system.Ensure that eBOP safety stock is in line with site requirements.Ensures a safe working environment, meets safety standards, and adheres to regulatory compliance requirements.Assist in monitoring compliance with all operational regulations and associated permits, including all applicable safety, health, and environmental regulations.Assists with scheduling and tracking maintenance tasks.Any other duties, as assigned by the Site Manager, in line with the role.The role require standby duties (weekends and public holidays included). Qualification and Experience:Minimum of a Red Seal or Master electrician.Minimum of N6 in Electrical Certificate, a trade tested or a National Diploma in Electrical Engineering (Heavy Current).Minimum 5 years’ utility experience in power plant or field maintenance is desired.Valid Eskom ORHVS outcome level 6 (132 kV) authorized person.Experience in switching LV, MV and HV systems is a must.Working knowledge of power system protection.Demonstrated experience in the maintenance of LV and 33 kV cable systems including fault location and diagnostics.Cable jointing qualifications and experience is an advantage.General knowledge of Scada systems.Working knowledge of Microsoft Office packages including Outlook, PowerPoint, Word, and Excel.Working knowledge of wind plants is an advantage.Driver’s license. If you are not contacted within two weeks of ap
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQxODQ4X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1151641&xid=1266_41848
2y
1
SavedSave
Operations EngineerOur client is seeking an Operations Engineer to manage and coordinate the operations activities to improve reliability and performance. Open position : Operations EngineerLocation : Port ElizabethSalary : Market relatedType : Permanent positionReporting to : Branch Manager Job requirements :B-Tech or BSC Eng. in Mechanical engineeringMinimum 7 Years with relevant work experience preferably within the Automotive production/industryPreferably in a specialist roleComputer Literacy- SAP, Microsoft suite and MS ProjectsMetal processing plant experience would be an advantageWorking in a team environmentMust have the ability to lead and organise during a machine repair or installationApply general rules, mathematical methods, information, and machine manualsSound knowledge of a maintenance and production environmentGood client relations, communication skills including verbal aptitudeHave specific knowledge/experience to enhance production performance.Must be able to perform tasks required physicallyEffective transfer of knowledge and skills to subordinates and colleagues Duties :Ensure compliance to safety, health, environmental, quality policies, and standardsPlan, organise, lead and control operations work activities in both maintenance and productionAchieve and sustain equipment reliability levels to achieve OEE objectivesProject planning and executionAssemble, install, repair, and maintain machinery and equipment as required and as per OEM standardsOptimise planned maintenance inspection cards to be predictive and preventativeManagement of sub-contractors including their safety and quality of worko Develop team members to be knowledgeable in equipment specifications, operating standards, and fault-findingo Develop tools / systems / processes to improve knowledge and skills transfero Manage and assess the performance of individual team memberso Optimise production and maintenance processes to improve productivity and reliabilityo Root Cause Analysis of factors causing poor operations performanceKey KPI’s – machine availability, machine utilisation, break down performance, OEE, cost, continuous improvement Should you meet the above job requirements, please email your CV to nanette@zwanda.co.za Please add “Operations Engineer” into the subject line of your email. No reply after 2 weeks indicates that you have been unsuccessful.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQ4Nzc0X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1184133&xid=1266_48774
2y
Save this search and get notified
when new items are posted!