Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Home & Garden
Filter & refine
Clear All
Results for Water Purifiers & Geysers in Mbombela / Nelspruit
1
R 688.28
SavedSave
What is Filtered water?
Filtered water is water that passes through a device, which removes
impurities in the water by means of a physical barrier or chemical
process. Filtered water has fewer total dissolved solids (TDS) than
water that has not been filtered.
1d
1
R 582.48
SavedSave
What is Filtered water?
Filtered water is water that passes through a device, which removes
impurities in the water by means of a physical barrier or chemical
process. Filtered water has fewer total dissolved solids (TDS) than
water that has not been filtered.
1d
1
R 387.67
SavedSave
Stage 1: Sediment Filter Functions: Removing sand, rust, mud, sediment, etc. in water.
What is Filtered water?
Filtered water is water that passes through a device, which removes
impurities in the water by means of a physical barrier or chemical
process. Filtered water has fewer total dissolved solids (TDS) than
water that has not been filtered.
1d
1
R 626.75
SavedSave
Calcite media is a naturally occurring calcium carbonate media. One
of the advantages of Calcite water treatment is its self-limiting
property. When properly applied, it corrects pH only enough to reach a
non-corrosive equilibrium. It does not overcorrect under normal
conditions. Upon contact with Calcite media, acidic waters slowly
dissolve the calcium carbonate to raise the pH which reduces the
potential leaching of copper, lead and other metals found in typical
plumbing systems. Periodic backwashing will prevent packing, reclassify
the bed and maintain high service rates. Depending on pH, water
chemistry and service flow, the Calcite bed will have to be periodically
replenished as the Calcite media is depleted.
As the Calcite’s calcium carbonate neutralizes the water, it will
increase hardness and a softener may become necessary after the
neutralizing filter.
Calcite media can be effectively combined with Clack Corosex to combine
the high flow neutralization properties of Corosex, along with the
slower reacting low flow properties of Calcite, increasing the ability
to correct low pH.
1d
1
R 21,850
SavedSave
1000 GPD Reverse Osmosis System / 1000GPD RO System / Industrial RO system
TWC’s 1000 GPD Reverse Osmosis System is part of a family of
reverse osmosis units specifically designed for operation with fresh and
brackish feed waters having TDS values below 1,500ppm. Customers can access these Models with permeate output of 125 liters/hr as shown in the specifications.
The reverse osmosis systems have been widely used for commercial
purposes such as treatment of wastewater, desalination, minerals
reclamation, and purification of water. If you have been searching for
the best and most efficient Industrial RO system, then you have landed
at the right place. At TWC, we provide the best quality RO water units
that can meet your needs, expectations, and budget. We provide the highest standard and compact commercial reverse
osmosis system at an affordable pricing range. All our RO systems are
highly durable and we guarantee that they can be last for many years
with proper care and maintenance.
Benefits
Specialized Micro-Computer ControllerFully Equipped and CustomizableSuper-Quiet BWI 1-6 Horizontal Multistage PumpLow Energy ConsumptionHigh Flow Low-Energy MembraneLow MaintenanceCompact Space Saving Design
Standard Features
RO micro-computer controller with permeate TDS readout300PSI stainless steel membrane housing+PE end capsShimge BWI 1-6 multistage pump for 800GPD5-micron sediment pre-filter x 1Rotameter for permeate and concentrate streamPressure gauges for prefilter feed andRO feed High-pressure switchElectro-plated SS304 skid frame125 L/PH3000 L/PD
2d
1
R 350,000
SavedSave
Brackish Water Reverse Osmosis Systems
Reverse Osmosis is the process of removing dissolved
elements from your water. For example, if you have a cup of water. Each
time you add a teaspoon of sugar, The TDS will increase. So, the more
sugar you add, the higher your TDS will be. A filter system will not
remove the sugar that’s dissolved in the water. The only way to remove
what’s dissolved in the water is to put it through a reverse osmosis
system.
2d
1
R 552,000
SavedSave
The Reverse Osmosis 10 000l P/HR have been widely used
for commercial purposes such as treatment of wastewater, desalination,
minerals reclamation, and purification of water. If you have been
searching for the best and efficient Industrial RO system, then you have
landed at the right place. At The Water Company, we provide the best
quality of RO water units that can meet your needs, expectations, and
budget.
We provide the highest standard and compact commercial
reverse osmosis system at an affordable pricing range. All our RO
systems are highly durable and we guarantee that they can be last for
many years with proper care and maintenance.
The Water Company’s RO series systems are part of a
family of reverse osmosis units specifically designed for operation with
fresh and brackish feed waters having TDS values below 1,500ppm.
Customers can access these Models with permeate outputs of between 150
and 10 000 liters/hr as shown in the specifications.
2d
1
R 16,293.83
SavedSave
The Seko TPR603 is ideal for pH/conductivity control in a single
unit. The pump includes a controller with adjustable feedback loop
parameters and is capable of dosing an acids or bases to a pH setpoint.
Please note that probes are sold separately.
Supplied with Viton seals as standard. Please specify alternative EPDM seals for chemicals such as caustic lye.
What’s in the box:
Complete pump and controllerRemovable base/stand6mm suction (4m) and delivery tube (2m)Foot valveInjector
TPR Manual
TPR Brochure
10d
1
R 13,685
SavedSave
Seko TPG800 is a digital solenoid-driven dosing pump with constant
flow rate that can be adjusted manually or with proportional flow rate
according to an external analogue (4÷20 mA) or digital pulse signal such
as a water meter.
The pump is also equipped with a manual priming pump for the start
up and comes complete with a standard installation kit, which includes a
PVDF foot filter and injection valve, PVC suction tube and PE delivery
tube. A PVDF-T installation kit is available on request.
10d
1
R 9,982.58
SavedSave
Supplied with Viton seals as standard. Please specify alternative EPDM seals for chemicals such as caustic lye.
What’s in the box:
Complete pumpRemovable base/stand6mm suction (4m) and delivery tube (2m)Foot valveInjector
10d
1
R 7,107
SavedSave
The Seko AKS603 reliable dosing pump with a manual adjusting dial for
accurately dosing a constant flow rate into a tank or pressurised
pipeline. The pump is switched on/off via a relay or flow switch to
start/stop dosing at the rate set on the dial. There are two frequency
settings: 0-20% and 0-100%. Suitable for a wide range of solids free
liquid chemical or fertiliser dosing application.
Delivers 4l/hr at 12 bar line pressure up to a maximum flow rate of 8l/hr at 2 bar.
The complete standard installation kit is composed of: foot filter
and injection valve, PVC suction tube, PE delivery tube and wall fixing
bracket.
Specifications:
-Inlet/outlet: 4/6mm inside/outside diameter
-Power: 220V, 12.5W
-Max stoke frequency: 160 /min
-Casing made of PP reinforced with glass fibre
-IP 65 rated
-PTFE diaphragm
-Level control input
-Priming valve
-Installation kit and pump head material: PVDF with ceramic balls
-Viton (FPM) seals as standard. Please note that EPDM seals are required for chemicals such as caustic lye.
10d
1
R 917.35
SavedSave
These Polyethylene tanks are suitable for the storage and dosing of fluid chemicals. The tanks feature a moulded litre scale.
The top features a large screw cap and surfaces for mounting dosing pumps, mixers and level control.
10d
1
R 1,725
SavedSave
These Polyethylene tanks are suitable for the storage and dosing of
fluid chemicals. The tanks do not feature a moulded litre scale.
The top features a large screw cap and surfaces for mounting dosing pumps, mixers and level control.
10d
1
R 2,421.90
SavedSave
These Polyethylene tanks are suitable for the storage and dosing of fluid chemicals. The tanks feature a moulded litre scale.
The top features a large screw cap and surfaces for mounting dosing pumps, mixers and level control.
10d
1
R 4,600
SavedSave
Technical Specification:
Flow: 0.48 ~ 15.20 L/hPressure: 8.2 ~ 1.8 BarFeatures
LCD displayAdjust the flow by keyCycle timerFrequency or percentage modelOptional automatic control by an external signal
10d
1
R 3,937.14
SavedSave
A versatile, multi-model solution within the SEKO solenoid dosing
pumps range, the wall-mounted Kompact series is ideal for cost-critical
applications with small delivery requirements such as chemical dosing
systems for swimming pools.
Among the energy-saving features of the Kompact chemical dosing pumps
range is a stabilized multi power supply, which draws the precise
quantity of power required to activate the pump. This optimizes
efficiency and ensures power supply fluctuations do not jeopardise
performance.
Kompact is built with the superior components you expect from a SEKO
product, including ceramic ball valves, PTFE diaphragm and PVDF-T pump
head (PVDF optional). This delivers exceptional chemical compatibility
with wetted parts for outstanding life expectancy and reduced
maintenance requirement.
10d
1
R 4,489.83
SavedSave
Type: Round
Material: hdpe (high density polyethylene)
Moulding: By injection
Brine Tank colour: White
Cover Colour: White
10d
1
R 1,150
SavedSave
FOR DOSING TANK 100L ONLY
Brine well Heigh: 44″ – 111cm.Connection: 3/8″Height: 91,3 cmWidth: 8,9 cm
10d
1
R 1,477.75
SavedSave
Type: Square
Material: hdpe (high density polyethylene)
Moulding: By injection
Brine Tank colour: Blue & Grey
Cover Colour: Blue
10d
1
R 1,480.05
SavedSave
Type: Square
Material: hdpe (high density polyethylene)
Moulding: By injection
Brine Tank colour: Blue & Grey
Cover Colour: Blue
10d
Save this search and get notified
when new items are posted!
