MICROWORLD PCI FIBRE CARD 100MBPS

PCI FIBRE CARD 100MBPS – TXA025-01

Product specification

Model number: TXA025

Chipset: ICplus IP100A Ethernet Controller

Port number: 2 x SC or 1 x SC

Standard: IEEE 802.3?IEEE 802.3u?IEEE 802.3x?IEEE 802.1p

Data Rate: 10/100Mbps

Transmission Distance: 20 km

Interface: PCI

LED Indicator: 10/100Mb(Link/Act)

Dimension: 120 x 51 x 13.8mm

Support OS

Windows 10(32/64), 8 / 8.1 (32/64), 7 (32/64), Vista(32/64), XP(32/64), 2000

Windows Server 2012, 2008 R2, 2003(32/64)

Mac OS 10. x (Intel based, tested up to 10.9)

Linux 2.4. x and later (Tested up to 3.5)

Environment

Operating Temperature: 0 -70

Relative Humidity: 10%-90% (non-condensing)

Storage Temperature: -0?-80

Relative Humidity: 5%-90% (non-condensing)

Other Functions: WOL

Support PXE

Chipset Description:

The IP100A is a single-chip, full duplex, 10/100Mbps Ethernet MAC + PHY incorporating a 32-bit PCI with bus master support

The IP100A is designed for use in a variety of applications including workstation NICs, PC motherboards, and

Other systems utilizing a PCI bus that require network connectivity to an Ethernet or Fast Ethernet LAN.

The IP100A includes a PCI bus interface unit, IEEE 802.3 compliant MAC, transmit and receive FIFO buffers

IEEE 802.3 compliant 100BASE-TX, 10BASE-T, and 100BASE-FX PHY, serial

EEPROM interface, expansion ROM interface, and LED drivers

The IP100A implements a rich set of control and status registers

Accessible via the PCI interface, these registers provide a host system visibility into the features

And operating state of the IP100A

Network management statistics are also recorded

And host access to registers of the PHY device are facilitated through the IP100A’s PCI interface

The IP100A supports features for use in “Green PCs” or systems where control over system power consumption is desired

The IP100A supports several power down states, and the ability to issue a system

Wake event” via reception of unique user defined Ethernet frames

In addition, the IP100A can assert a wake event in response to changes in the Ethernet link status