Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Results for Other Skill Trade Jobs in Durbanville
1
SavedSave
Glass installer needed
Full time position
must have experiance in glass fitting in wooden and aluminium frames
24d
Ads in other locations
6
Dear Potential Candidate:
Kindly read the ad in detail until the end, before sending your CV.
We have a vacancy for a Senior Commissioning Technician to work on Fire Detection and other security related systems. We operate in the middle to high-end of this specific market segment and are well established within the industry.
Minimum of 5 years relevant experience is a definite pre-requisite. SAQCC registration for Fire Detection Systems is required. Training certificates to work on specific Fire Detection Systems will be an advantage.
If you are looking for a new exciting career opportunity, please send your detailed CV with contactable references to hr@integratek.co.za.
We are looking for candidates who are seeking long term employment and are dedicated to develop their career within our company.
Responsibility:In return for your commitment and dedication we offer:
• a 13th cheque
• Performance Incentives
• External Product Specific Training opportunities
• Company Cell Phone & Laptop
• Company Vehicle with petrol card
• Pension & disability benefits
• Market related Salary
Please apply by e-mailing a detailed professional CV with references and a recent colour photo to hr@integratek.co.za
Please note:
Should you not hear from us within 4 weeks, please consider your application unsuccessful. We advertise on a permanent basis to find suitable candidates to expand and grow the company.
PLEASE ONLY send your CV if:
You have a South African ID Document – we do not employ foreign nationals
You currently live in the Cape Town or George areas
You DO NOT have a criminal record
You have technical experience in the security industry – we do not employ general workers, security guards or technicians without relevant experience.
If you currently live in the Cape Town or George Area – we do not employ people outside of the Cape Town and George areas.
Thank you, we look forward to receive your updated and most recent CV.
Job Reference #: FireDetectionCommissioningTechnician
6h
4
We have a vacancy for an Installation & Commissioning Technician to work on Alarm System, CCTV, Access Control and other security related systems. We operate in the middle to high-end of this specific market segment and are well established within the industry.
Minimum Requirements:
Minimum of 3-5 years relevant experience doing the same work is a definite pre-requisite. PSIRA and SAIDSA registration is required. SA ID and live in the Cape Town or George area.
Training certificates (from ONLY the past 2 years) to work on Alarm Systems, Access Control and CCTV Systems will be an advantage.
Please ONLY send your CV if you meet the minimum requirements and have a SA ID and stay in the Cape Town or George Area. We DO NOT employ candidates from other areas.
If you are looking for a new exciting career opportunity, please send your detailed CV with contactable references to hr@integratek.co.za
We are looking for candidates who are seeking long term employment and are dedicated to develop their career within our company.
Responsibility:In return for your commitment and dedication we offer:
• 13th cheque
• Performance Incentives
• External Product Specific Training opportunities
• Company Pension & disability benefits
• Market related Salary
Please apply by e-mailing a detailed professional CV with references to HR@integratek.co.za
Please note:
That should you not hear from us within 2 weeks, please consider your application unsuccessful. We will keep your CV on record for future reference.
Please ONLY send your CV if you meet the minimum requirements and have a SA ID and stay in the Cape Town or George Area. We DO NOT employ candidates from other areas.
Thank you.
Job Reference #: Security_Installation_Technician
6h
1
SavedSave
Our client, a leading manufacturer of retail merchandizing solutions is seeking a Storeman to join their team.
Requirements:
Matric Certificate / Grade 12
Computer literate /Microsoft
Good knowledge of stock items
Costing experience
Driverâ??s License
Duties:
Receiving and issuing of stock
Maintaining stock levels
Compiling stock orders
Keeping track of tools
Recording of stock issued and returned
To apply, please send your CV to hannah@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Â
Persona Staff (PTY) Ltd. is POPIA (Protection of Personal Information Act, 2013) compliant.
SECTOR: Construction
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004762/H&source=gumtree
7h
1
SavedSave
Our client is a leading manufacturer of retail merchandizing solutions, and they are currently seeking to appoint a storeman to join their team.
Requirements:
Matric Certificate / Grade 12
Computer literate /Microsoft
Good knowledge of stock items
Costing experience
Driver’s License
Duties:
Receiving and issuing of stock
Maintaining stock levels
Compiling stock orders
Keeping track of tools
Recording of stock issued and returned
To apply, please send your CV to megan@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff (PTY) Ltd. is POPIA (Protection of Personal Information Act, 2013) compliant.
SECTOR: Construction
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004749/MM&source=gumtree
7h
1
SavedSave
Our client is a leading manufacturer of retail merchandizing solutions, and they are currently seeking to appoint a storeman to join their team.
Requirements:
Matric Certificate / Grade 12
Computer literate /Microsoft
Good knowledge of stock items
Costing experience
Driverâ??s License
Duties:
Receiving and issuing of stock
Maintaining stock levels
Compiling stock orders
Keeping track of tools
Recording of stock issued and returned
To apply, please send your CV to natasha@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful. Persona staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
SECTOR: Construction
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004685/N&source=gumtree
7h
1
SavedSave
Our client, a top manufacturer of retail merchandizing solutions is searching for an experienced Storeman
to oversee all warehouse operations effectively.You will play a key role in ensuring inventory accuracy, maintaining a clean and organized warehouse, and facilitating the smooth flow of goods in and out of the facility.
Requirements:
Matric Certificate / Grade 12
Minimum 2-3 years experience in a similar role
Computer literate /Microsoft
Good knowledge of stock items
Costing experience
Driver’s License
Duties:
Receiving and issuing of stock
Maintaining stock levels
Compiling stock orders
Keeping track of tools
Recording of stock issued and returned
To Apply: Please send your CV to liza-nelle@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. By applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request our POPI Act Policy.
SECTOR: Construction
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004666/LN&source=gumtree
7h
1
SavedSave
Our client is a leading manufacturer of retail merchandizing solutions, and they are currently seeking to appoint a storeman to join their team.
Requirements:
Matric Certificate / Grade 12
Computer literate /Microsoft
Good knowledge of stock items
Costing experience
Driver’s License
Duties:
Receiving and issuing of stock
Maintaining stock levels
Compiling stock orders
Keeping track of tools
Recording of stock issued and returned
To apply, please send your CV to julia@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff (PTY) Ltd. is POPIA (Protection of Personal Information Act, 2013) compliant.
SECTOR: Construction
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004717/JH&source=gumtree
8h
1
SavedSave
Our client is a leading manufacturer of retail merchandizing solutions, and they are currently seeking to appoint a storeman to join their team.
Requirements:
Matric Certificate / Grade 12
Computer literate /Microsoft
Good knowledge of stock items
Costing experience
Driverâ??s License
Duties:
Receiving and issuing of stock
Maintaining stock levels
Compiling stock orders
Keeping track of tools
Recording of stock issued and returned
To apply, please send your CV to craig@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Â
Persona Staff (PTY) Ltd. is POPIA (Protection of Personal Information Act, 2013) compliant.
SECTOR: Construction
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004665/CS&source=gumtree
8h
1
SavedSave
Fitter and Turner.
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driver’s license with own reliable transport.
Skills and Knowledge Required
Preventative Maintenance Routines.
Welding (Mig Tig & Arc), Milling, and Turning.
Planning - Check that all part complies with procurement register and data pack.(Report any deviations) Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
Material Cutting - bandsaw, cut-off saw, cutting torch, grinder.
Drilling and/or slotting holes: Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding: Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and fitting related tasks - planning: Check that all part complies with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g.: Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Pneumatics and Hydraulics.
Gearboxes.
Water Systems and Cooling Towers.
Basic Electrical Experience.
Bearing and Shaft Changing.
Fault Finding and Diagnosis.
Lubrication.
Please forward your CV to megan@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.Consultant Name: Megan Ockhuis
8h
1
Our client, based in the Northern Suburbs, is an Internationally established Manufacturing company. They are seeking to appoint a qualified and experienced Boilermaker on a 6-month contract position.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Qualified Boilermaker Trade Test Certificate
Minimum of 1 -2 years’ post trade experience.
A valid driver’s license with own reliable transport
Skills and Knowledge Required
Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
Welding – Mig, Tig and Arc
Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to megan@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.Salary: R120 - 150 p/hConsultant Name: Megan Ockhuis
8h
4
SavedSave
Welder / Metal Fabricator.
We need a metal fabricator to assist
with the following:
Fabricate metal gates and balustrades.General metal fabrication.
The criteria for the position:
Have at least 3 years’ experience in gates and balustrades
manufacturing.Have MIG welding experience.Tig welding not essential but will be of an advantage.Be able to read shop drawings.Work to accurate measurements.
In return we offer the following:
Competitive salaryPleasant working environment
Send CV to: info@schmidtcustom.com
1d
SavedSave
ROOFING & WATERPROOFING COMPANY - MONTAGUE GARDENSLooking for the following skilled worker* Carpentry (Fascia Boards) Eaves etc. Valley Gutters.* Roof Sheeting & Roof Tiles Replacements.* Ceiling and skimming Crete-Stone.* Painting.* Must carry out various Waterproofing Skills.* Driver's license a Bonus to be successful skills.CONTACT VIA E-MAIL: info@anchorroofing.co.za
1d
Seeking skilled
joinery and flooring installer competent in installation of staircase, flooring, decking and
joinery.
Valid
drivers licence
Minimum 10
years experience in cabinetry, joinery, or flooringEmail CV to sales.timberprojectsquad@gmail.com with valid references.Do not send CV or make contact if you are not an installer of wooden flooring/Cabinetry/Joinery
11h
Hydraulic Field
Service Technician
Do you have
a passion for hydraulic equipment and a knack for trouble shooting complex
systems? Then this job is for you,
Requirements:
1. Must have a minimum of 5 years technical
experience
2. Proven experience in trouble
shooting and repairing a wide range of hydraulic systems
3. Strong problem solving skills
4. Experience using diagnostic tools
5. Must be able to read hydraulic
schematics and problem solve
6. Ability to work independently and as
part of a team
7. Must always be neat and presentable
8. Must be able to communicate well
with clients and co workers
9. Valid drivers licence
10. Fully bilingual: English and
Afrikaans
11. Meet required dead lines and work
overtime when necessary
Remuneration: will be discussed upon interviewPlease email cv to: tinamaree22@gmail.com
3d
SavedSave
Compressor fitter position availableRequirements:Grade 12 will be an advantageTechnical and Mechanical knowledge (Preferably in Compressor industry)Drivers License is essentialLiterate - Afrikaans and English ( Read, write and speak)Skills:Fast LearnerUse own initiativeBe able to work individually and as part of a teamBe able to work under pressureGood interpersonal and communication skillsProblem solving skillsPhysically fitWork involves:ServicingRepairsInstallationsFault findingAd-hoc dutiesVery Important:Must reside in the Northern SuburbsNo criminal recordSober habits3 month probation period will be applicableWork hours:8am to 5pm Monday to Friday (longer hours on request)If you meet all the above, please send you CV, relevant documents and salary expectation with a recent Photo of yourself to:kaaplandcompressors@gmail.com
7d
2
SavedSave
Must be able to stitch, cut and repair
8d
SavedSave
We need a metal fabricator to assist
with the following:
Fabricate metal gates and balustrades.General metal fabrication.
The criteria for the position:
Have at least 3 years’ experience in gates and balustrades
manufacturing.Have MIG welding experience.Tig welding not essential but will be of an advantage.Be able to read shop drawings.Work to accurate measurements.
In return we offer the following:
Competitive salaryPleasant working environment
Send CV to: info@schmidtcustom.com
16d
1
SavedSave
Our rapidly growing company are seeking an experienced and detail-oriented Junior Quantity Surveyor to join our team. The ideal candidate will have a strong background in construction projects, excellent numerical and analytical skills, and the ability to work effectively in a fast-paced environment and with a team.Requirements:• A Driver’s license is a must, preferably with own reliable vehicle• Qualifications listed - Minimum Matric, Build Smart, CCS, OHS Act, Construction Regulations• Degree / Diploma in Construction Management / Quantity Surveyor/ Artisanship• Minimum - legal Accountability/SHE Management (would be ideal)• Minimum - OHS Act, Construction Regulations• Working experience required- 1-2 years in this specific role• Industry experience required- 2-3 years in the construction Industry• Microsoft Office, Build Smart, CCS and QTYKey Performance Areas:Surveyors seek to minimize construction costs and enhance value for money, while still achieving the required standards and qualityResponsibilities:• Establish cost control methods with the Contract Manager• Liaise with senior QS to determine industry/company best practices• Liaise with the client’s QS representative, subcontractors, and suppliers, prepare and agree value variations• Ensure that the preparation of valuation and issue of interim certificates enable punctual payment• Ensure that subcontract orders are placed in accordance with the requirements of the procurement schedule• Monitor and update contract turnover and cash flow forecasts as required• Cross-check material deliveries against site measurements• Performs other related duties as assignedThis is an exciting opportunity for a talented Junior Quantity Surveyor to join a rapidly growing Company and a dynamic talented team. If you meet the requirements and are ready to take on this challenging role, we look forward to receiving your application.Please Email your CV to virgol@csddev.co.zaIf you have any questions, please contact our Sales Office Manager.Virgol JacobsTel: 021 518 3069Cell: 063 245 3480Email CV to virgol@csddev.co.zaPlease take note: if you have not been contacted within 14 days, please consider your application unsuccessful.
19d
1
SavedSave
Our company, Capidek (Pty) Ltd., is in need of suitable and experienced Building Foreman's as we are expanding and in need of skilled employees. Suitable candidates must have a minimum of 10 years experience, must have contactable references and must be able to read and understand plans.All suitable candidates to send through there CV's along with any other certification and documentation to:marwhaan@capidek.co.zaash.shaik@capidek.co.zamujahid@capidek.co.zaestelle@capidek.co.zaAll suitable applicants to submit their CV's on or before 03 May 2024. If you do not receive any feedback within 3 weeks from date of closing, please consider your application unsuccessful.
20d
Save this search and get notified
when new items are posted!