Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Top ads in Manufacturing Jobs
Need a full-time paint colour matcher in the wood/industrial coatings industry
24d
Maitland
Upholsterer / Seamstress with experience in Cutting and Stitching of Canvas Canopies for Bakkies and Safari Vehicles. Send your CV to: waterbarrel@mweb.co.za or Whattsapp: 0829525786
3d
Pretoria West
Results for Manufacturing Jobs in South Africa
1
SavedSave
Our client based in the Northern Suburbs in the manufacturing industry is seeking a qualified Production Engineer to join their team.
Responsibilities:
Responsible for the planning of overall day to day production.
Management of production staff and all other related resources in the manafacturing system.
Develop daily or weekly production schedules to ensure that production deadlines are met.
Implement and maintain production processes and procedures that enhances productivity and efficiency.
Enforce regular housekeeping in the production facility.
Determine material, equipment, and labor requirements, prepare status and performance reports, and resolve production issues.
Provide weekly feedback to senior management on the progress of each job and proactively report all issues experienced.
Implement and maintain quality system that enhances and monitor the quality of all products produced.
Assist with administrative related duties to ensure all paper work for jobs are done.
Requirements:
Matric / Grade 12.
National Diploma / BTech or BEng Mechanical or Industrial Engineering.
Electrical / Refrigeration experience advantageous
Minimum of 3-5 yearsâ?? similar experience
Own transport and valid license
Fully computer literate
Please send your application to hannah@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff (Pty) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
SECTOR: Manufacturing
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004704/H&source=gumtree
11h
SavedSave
A client in Montague Gardens is currently looking for a Forklift Driver.If you are interested and have the relevant experience - please don't hesitate to respond to the Advert.The Client offers competitive rates and is looking for someone who can start immediately.
17h
SavedSave
A client in Montague Gardens is currently looking for a Sewing Machine Mechanic.If you are interested and have the relevant experience - please don't hesitate to respond to the Advert.The Client offers competitive rates and is looking for someone who can start immediately.
17h
1
VACANCY for Aluminium & Glass ASSEMBLER / ALL ROUNDEREXPERIENCE ESSENTIAL Drivers licence Salary as per industry standard, experience and abilityforward a detailed CV to discglass@iafrica.com
17h
SavedSave
Looking for experienced recycling machine operator (palletizer and crusher operator’s) with management/supervisory experience. For Bopp ,pollyprop plastic.Pinetown area.Send below details to 083 209 1010:Full name: Age: Current location: Previous work experience: Previous Salary: Why did you leave previous job: References:
19h
1
Bending Operator / Lazer Cutting (CNC Operator)
Our client is based in Brackenfell and they are seeking to employ Bending Operator / Lazer Cutting (CNC Operator).
Do you have a matric certificate and at least two years CNC working experience?
STRICT REQUIREMENTS:
• Completed Grade 12 / Matric Certificate (certificate will be requested).
• CNC Operating experience (Min 2 Years).
• Sheet Metal bending experience or;
• Laser cutting experience.
• Milling and lathing experience will be an advantage.
• Must be hardworking and dedicated.
• Clean criminal record.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.Consultant Name: Megan Ockhuis
21h
SavedSave
Our client is looking for an experienced Aluminum tradesmen. Must be able to work on the floor with material, cutting, fitting etc.Send us your cv to training 19001@gmail.comLocation: VerulamNo Calls please
1d
SavedSave
Company in Germiston is looking for part time upholsterer, on a regular basis. Must be experienced and able to travel.
1d
2
I supply printed material in panels, you sew it up for me. 1week turn around, for 10to50 units a week.
Sewing tshirts,vests,hoodies ready printed In pattern, may need to cut out and sew.
Use your own equipment.
Fast turn around essential
Neat sewing essential
Can be located in vaal or jhb
Fee payable per item sewn.
R40 golfers
R35 tshirts
R50 hoodies
You supply cotton,zips if needed and buttons for golfers. I supply everything else, size labels, labels, ribbing etc.
Start asap.
I courier goods to you and when finished I send a courier to collect.
Payment made once garments are ready for delivery and photo proof has been sent.
*nb* must be able to turnaround quickly. Receive on Mon/Tuesday and collect Thursday or Friday finished ,same week is my ideal partner.
Quantity from 10 to 50 units a week.
1d
SavedSave
We are looking for a honest candidate that is diligent and can work as a team in a manufacturing environment at a factory, and has the following attributes to the highest standard:*Punctual , work starts at 7:30am and good time keeping.*Well spoken*Can work without supervision*No criminal record*Friendly disposition*Accurate and neat*Has excellent standards and ability to self correct*Can communicate easily in a team and be honest*Enjoys working with their hands and mind*Contributes positively to the work environment.*Computer literate and good at basic maths.*Matric pass rate required and proof thereofWork hours 07:30am - 4:30pm ( If you can't commit to these hours MON- Fri please don't respond to the ad.Wages: To Be Confirmed, but starting rate is about R30 during training and can be increased based on your ability to do the work correctly and accurately.Only if you send a CV email to gtreply@gmail.com will you be considered for an interview. If you just reply to the ad directly and not attach the CV it won't be looked at. If you can't attach the CV it will be assumed you are not computer literate and you won't be considered for the interview.CV and education qualifications will be verified and checked, as well as references. If your CV is successful you will be asked for an interview.
2d
SavedSave
Busy design center looking for an all rounder machinist or sample hand machinist that has more than 5 years experience working in a design center or small cmt who is quality conscious, has attention to detail and can keep up with daily and weekly targets. Please whatsapp your details etc to 0840541987 to set up an interview.
2d
Woodwork
Factory manager - Citrusdal
Position
available for hardworking, responsible, sober person.
Requirement:
-
Experience in the woodworking sector is essential.
-
Person must be able to read plans and do quotes.
-
Knowledge of the planning and management of a project is important.
-
Knowledge of woodworking computer programs will count in favor.
-
Must be able to lead a team and apply quality control.
-
Must be able to work under pressure to complete jobs with deadlines.
-
Be fluent in English and Afrikaans.
-
Valid driver's license is required.
-
Market Related Salary
Please
send email to info@caraldo.co.za
2d
SavedSave
Coldstore Stock Controller
A fish processing facility is looking for stock controller. The
responsibilities are as follows:
·
Manage and maintain accurate records of
inventory on a daily basis
·
Conduct regular stock counts and audits of
physical stock on hand
·
Identify discrepancies or stock variances and
investigate root cause
·
Generate stock reports
·
Work with the HACCP team to ensure the coldstore
meets all requirements
·
Any other duties that may be required
Requirements:
·
Proven experience in stock control
·
Excellent attention to detail and accuracy in
record-keeping
·
Ability to work independently as well as part of
a team
·
Strong organization and time management skillsPlease respond to this email with your CV. If you do not hear from us, find you application unsuccessful.
2d
Company based in Westmead, Durban looking
to employ a Production Planner.
Requirements:
·
Preferably with
Technical, Industrial / Factory and Engineering background
·
Proven customer
support experience and/or client service experience
·
Computer and
Admin Knowledge
·
Occasion overtime
when required
·
Handle complaints
and queries
·
Manage incoming
calls/emails
·
Quotations
·
Will work closely
with accounts department / Factory & Sales Reps
Starting Salary: R9000 Per Month
Preferable to start
immediately.
Kindly email cv to marketing@rubberengineeringsa.com
2d
2
SavedSave
We are looking to employ a person with printed circuit boards assembly experience. Must be able to program and operate assembly machines, understand oven profiles and processes. At least 3 years experience with some technical background. Be able to manage a team with high standards and quality. Send cv with ID to heston@jjharnessing.co.za
2d
1
Opportunity Available!! Our leading client in the Manufacturing Sector is looking to employ a Production Engineer (Metallurgy) to join their dynamic team in Middelburg.
Job Description:
The incumbent will be responsible to optimize and continuously improve the production processes adhering to QCDSM (Quality, Costs, Delivery, Safety and Moral) framework and will ensure that business KPA’s and KPI’s are met.
Functions of this role also include overseeing the three shift production teams, ensuring safety and quality compliance within the team in accordance with the relevant standards and cost effectively executing all production related activities.
The successful candidate will be the custodian of metallurgical processes through reporting, analysing and monitoring the production process and product quality.
Recommending improved processes based n trials and responsible for ensuring the implementation of the corrective actions.
Job Requirements:
This exciting role demands a BEng (preferably Pyro Metallurgy or Chemical Engineering, Physical Metallurgy will be considered) and 5 years experience in the steelmaking process, plus systems knowledge (energy and mass balance models), SHE and quality procedure and proficiency in MS Office.
Knowledge of Steelplant AOD, EAF/Caster and or Raw Materials would be an added advantage.
SECTOR: Manufacturing
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93ZWJhcHAucGxhY2VtZW50cGFydG5lci5jb20vd2kvYXBwbGljYXRpb25fZm9ybS5waHA/aWQ9c3RhZmZzb2xzJnZhY2FuY3lfcmVmPUUuTDAwMjAxNS9CRw==&jid=1805723&xid=E.L002015/BG
2d
SavedSave
Couch upholsterer wanted in Capital park, PretoriaSend Whatsapp to: 0824202608Salary: R6000 Per month.
3d
I am looking for experienced Seamstresses/Seamsters to make women/men and kids clothing. The business is in Midrand. Please do not reply if Midrand Noordwyk is far for you. Reply to this or send a WhatsApp message to 068 642 2511
18h
SavedSave
We need someone who has an
in-depth knowledge of men’s, ladies, and kiddies sports & fashion.
Must have chainstore
experience.
Computer literate. Knowledge
of GGT pattern making and grading would help.
Good communications skills.
Must be able to work under
pressure.
Punctuality is key.
3d
1
SavedSave
CNC Operator
Our client is based in Stikland and they are seeking to employ CNC Operators. Do you have a matric certificate and at least two years CNC working experience? Are you willing and able to work 12-hour shifts that include nightshifts and weekends?
STRICT REQUIREMENTS:
• Completed Grade 12 / Matric Certificate (certificate will be requested).
• Milling and lathing experience will be an advantage.
• CNC Operating experience (Min 2 Years)
• Mic, Micrometers, size experience is a MUST.
• Must be hardworking and dedicated.
• Ability and willingness to work rotational 12-hour shifts, including nightshifts and weekends.
• Clean criminal record.
AREA: Stikland (Transport will be own responsibility)
PAY RATE: TBD
APPLY: Send your CV and all documents to megan@personastaff.co.za or phone 021 975 8297 for more information.
Only shortlisted candidates will be contacted.
Consultant Name: Megan Ockhuis
3d
Save this search and get notified
when new items are posted!
