Please note that our Terms of Use and Privacy Notice are applicable.
Results for lathe in All Categories in Limpopo
25
R 2,495,000
SavedSave
Four bedroom house on a 1000ha game reserve limited houses for that feeling of exclusivity and peace and quiet. Only one and a half hours drive from Pretoria you will find this stunning house on a Wildlife Estate in Limpopo. The house The house is 428sqm with a playroom or study upstairs with a remarkable wrought iron staircase. The open plan living area included the lounge, dining room and kitchen and has ample space. The veranda with an open-air lounge and dining table flows over to the boma area. The boma area has a lathe wall sheltering it from the wind…this is where memories are made. The thatch roof is recently refurbished and mesh wire is installed on the roof to avoid monkeys pulling the grass out. Vehicles can be parked under the 3 carports or in one lockable garage. A petrol golf cart is included in the price. The home There are four rooms, two on both sides. Each side has a room with a double bed and a room with two single beds on both sides. Each room has its own bathroom. The room has got built in cupboards. Two bathrooms have a bath, shower, basin and a toilet and two bathrooms have a shower, basin and toilet. There is a scullery room next door to the kitchen. The house is fully furnished. There is a cleaning service available on the estate at a very reasonable price. The Estate The bush is untouched with an abundance of more than 250 species of birdlife and mammals that include, Hippopotamus, Sable Antelope, Buffalo, Blesbok, Kudu, Giraffe, Zebra, Nyala, Gemsbok, Impala, Bushbuck, Duiker, Brown Hyena, Steenbok, Waterbuck, Warthog, Ostrich, Red Hartebeest, Eland, Blue Wildebeest, Porcupine, Genet, Caracal, Serval, Civet, Honey Badger, Mongoose, Bush Baby, Vervet Monkeys, Aardvark. Owners are allowed to drive in their own game drive vehicles on the estate and mountain bikers and trail runners are welcomed. Owners are also welcome to dine at the privately operated lodge that is on site.Rates And Taxes: 4327Property Reference #: 7002001-34593Agent Details:Nean van ZyleXp Realty - Steven Johnstone Group1 Apple StreetKenilworthCape Town7708
3mo
25
R 2,495,000
SavedSave
Four bedroom house on a 1000ha game reserve limited houses for that feeling of exclusivity and peace and quiet.Only one and a half hours drive from Pretoria you will find this stunning house on a Wildlife Estate in Limpopo.The houseThe house is 428sqm with a playroom or study upstairs with a remarkable wrought iron staircase.The open plan living area included the lounge, dining room and kitchen and has ample space.The veranda with an open-air lounge and dining table flows over to the boma area.The boma area has a lathe wall sheltering it from the wind…this is where memories are made.The thatch roof is recently refurbished and mesh wire is installed on the roof to avoid monkeys pulling the grass out.Vehicles can be parked under the 3 carports or in one lockable garage. A petrol golf cart is included in the price.The homeThere are four rooms, two on both sides.Each side has a room with a double bed and a room with two single beds on both sides. Each room has its own bathroom. The room has got built in cupboards.Two bathrooms have a bath, shower, basin and a toilet and two bathrooms have a shower, basin and toilet.There is a scullery room next door to the kitchen.The house is fully furnished.There is a cleaning service available on the estate at a very reasonable price.The EstateThe bush is untouched with an abundance of more than 250 species of birdlife and mammals that include, Hippopotamus, Sable Antelope, Buffalo, Blesbok, Kudu, Giraffe, Zebra, Nyala, Gemsbok, Impala, Bushbuck, Duiker, Brown Hyena, Steenbok, Waterbuck, Warthog, Ostrich, Red Hartebeest, Eland, Blue Wildebeest, Porcupine, Genet, Caracal, Serval, Civet, Honey Badger, Mongoose, Bush Baby, Vervet Monkeys, Aardvark.Owners are allowed to drive in their own game drive vehicles on the estate and mountain bikers and trail runners are welcomed.Owners are also welcome to dine at the privately operated lodge that is on site.Property Reference #: 7002001-34593Agent Details:Nean van ZylEXP RealtySouth Africa13 Nankies Nook Eldoraigne , Eldo Park Estate , 157
22d
25
R 4,458,000
SavedSave
Sole & Exclusive mandate to sell. This inviting and tranquil home’s location overlooks the Oliphant’s River and is surrounded by large riverine trees and rocky outcrops, simply impressive. It offers four bedrooms, three of which are en-suite and one has access to a separate shower, toilet and basin, all the bedrooms have ceiling fans. The open plan living, dining and newly fitted kitchen are all under high vaulted ceilings that make this home light and bright and there is also a separate scullery. Leading off the living room is a large covered entertainment area, it stands sentry over the beautiful garden and swimming pool area where one’s attention is immediately drawn to the Olifant’s River. The entertainment area also has high vaulted ceilings, a built-in counter top, prep bowl and built in gas barbecue. This is a great space to spend part of one’s day just relaxing with a book, soaking up the beautiful surrounds and enjoying life. This home is being sold partially furnished.Additional infrastructure includes spacious outdoor entertainment area under iconic riverine trees, employee accommodation, triple carport, and storeroom, covered lathe area with small storeroom, water storage reservoir with river pump, borehole, JoJo tank and ESKOM connection as well as garden sprinkler system. This very neat home is set alongside the banks of the Olifant’s River, and it is truly one of the most magnificent sections along this iconic river that meanders it’s way through the Lowveld and ending up in Mozambique. The easy access to this stretch of the river enables one to get to some remarkable and unique rock formations as well as some beautiful waterfalls and cascades located close by. Happy days can be spent with family and friends around the swimming pool enjoying the magnificent garden and terraced lawns overlooking the river or pack a picnic basket and head out to explore the Olifant’s River itself. Ndlovumzi is a 1000ha wildlife reserve located 35km outside the town of Hoedspruit. Its Northern boundary being the Oliphant’s River, there are 43 properties in total, so a low footprint is maintained. The reserve has a healthy population of Waterbuck, Kudu, Nyala, Impala, Zebra, Giraffe, Wildebeest, Bushbuck, Duiker and other small antelope species. Numerous bird species abound for the avid birder or ornithologist. Nocturnal species include, Civet Cat, Genet, Porcupine, Aardvark and the allusive Caracal to mention a few. Close by attractions include the Kruger National Park, Swadini, Graskop and the scenic Panoramic Route, Moholoholo Rehabilitation center and so much more.DISCLAIMER|Century 21 Wildlife Properties have made every effort to obtain the information regarding these listings from sources deemed reliable. However, we cannot warrant the complete accuracy thereof, subject to errors, omissions, change of price, rental or other conditions, prior sale, lease or financing, or withdrawal without notice.Has PoolProperty Reference #: WLD-RS00235Agent Details:Jason JonesCentury21Shop 20 & 21 Kamogelo Tourism Centre Main Street
3d
25
R 4,458,000
SavedSave
Sole & Exclusive mandate to sell. This inviting and tranquil home’s location overlooks the Oliphant’s River and is surrounded by large riverine trees and rocky outcrops, simply impressive. It offers four bedrooms, three of which are en-suite and one has access to a separate shower, toilet and basin, all the bedrooms have ceiling fans. The open plan living, dining and newly fitted kitchen are all under high vaulted ceilings that make this home light and bright and there is also a separate scullery. Leading off the living room is a large covered entertainment area, it stands sentry over the beautiful garden and swimming pool area where one’s attention is immediately drawn to the Olifant’s River. The entertainment area also has high vaulted ceilings, a built-in counter top, prep bowl and built in gas barbecue. This is a great space to spend part of one’s day just relaxing with a book, soaking up the beautiful surrounds and enjoying life. This home is being sold partially furnished.Additional infrastructure includes spacious outdoor entertainment area under iconic riverine trees, employee accommodation, triple carport, and storeroom, covered lathe area with small storeroom, water storage reservoir with river pump, borehole, JoJo tank and ESKOM connection as well as garden sprinkler system. This very neat home is set alongside the banks of the Olifant’s River, and it is truly one of the most magnificent sections along this iconic river that meanders it’s way through the Lowveld and ending up in Mozambique. The easy access to this stretch of the river enables one to get to some remarkable and unique rock formations as well as some beautiful waterfalls and cascades located close by. Happy days can be spent with family and friends around the swimming pool enjoying the magnificent garden and terraced lawns overlooking the river or pack a picnic basket and head out to explore the Olifant’s River itself. Ndlovumzi is a 1000ha wildlife reserve located 35km outside the town of Hoedspruit. Its Northern boundary being the Oliphant’s River, there are 43 properties in total, so a low footprint is maintained. The reserve has a healthy population of Waterbuck, Kudu, Nyala, Impala, Zebra, Giraffe, Wildebeest, Bushbuck, Duiker and other small antelope species. Numerous bird species abound for the avid birder or ornithologist. Nocturnal species include, Civet Cat, Genet, Porcupine, Aardvark and the allusive Caracal to mention a few. Close by attractions include the Kruger National Park, Swadini, Graskop and the scenic Panoramic Route, Moholoholo Rehabilitation center and so much more.DISCLAIMER|Century 21 Wildlife Properties have made every effort to obtain the information regarding these listings from sources deemed reliable. However, we cannot warrant the complete accuracy thereof, subject to errors, omissions, change of price, rental or other conditions, prior sale, lease or financing, or withdrawal without notice.Rates And Taxes: 1800Levies: 2200Has PoolHas GardenProperty Reference #: 2152063Agent Details:Jason JonesCENTURY 21 Wildlife PropertiesShop 20 & 21Kamogelo Tourism Centre124 Springbok Street, Hoedspruit124 Springbok StreetHoedspruit1380
21d
8
25d
Ads in other locations
5
R 218,000
SavedSave
Between Centres 1500mm - swing over bed 500mm - spindle bore 80mm - swing in gap 630mm - swing over cross slide 325mm - cross slide travel 300mm - spindle speeds 24-1600 rpm - metric and inch threads - rapid traverse - 3 & 4 jaw chucks - fixed & travelling steadies - face plate - thread chasing dial - foot brake - coolant pump - chuck spanners - halogen machining light - tool boxItems Available: 1
10d
1
Bending Operator / Lazer Cutting (CNC Operator)
Our client is based in Brackenfell and they are seeking to employ Bending Operator / Lazer Cutting (CNC Operator).
Do you have a matric certificate and at least two years CNC working experience?
STRICT REQUIREMENTS:
• Completed Grade 12 / Matric Certificate (certificate will be requested).
• CNC Operating experience (Min 2 Years).
• Sheet Metal bending experience or;
• Laser cutting experience.
• Milling and lathing experience will be an advantage.
• Must be hardworking and dedicated.
• Clean criminal record.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.Consultant Name: Megan Ockhuis
19h
1
SavedSave
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driver’s license with own reliable transport.
Skills and Knowledge Required
Preventative Maintenance Routines.
Welding (Mig Tig & Arc), Milling, and Turning.
Planning - Check that all part complies with procurement register and data pack.(Report any deviations) Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
Material Cutting - bandsaw, cut-off saw, cutting torch, grinder.
Drilling and/or slotting holes: Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding: Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and fitting related tasks - planning: Check that all part complies with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g.: Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Pneumatics and Hydraulics.
Gearboxes.
Water Systems and Cooling Towers.
Basic Electrical Experience.
Bearing and Shaft Changing.
Fault Finding and Diagnosis.
Lubrication.
Please forward your CV to megan@personastaff.co.za
and indicate your salary expectations.Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004763/MM&source=gumtree
19h
1
SavedSave
Boilermaker (6-month Contract Position)
Our client, based in the Northern Suburbs, is an Internationally established Manufacturing company. They are seeking to appoint a qualified and experienced Boilermaker on a 6-month contract position.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Qualified Boilermaker Trade Test Certificate
Minimum of 1 -2 years’ post trade experience.
A valid driver’s license with own reliable transport
Skills and Knowledge Required
Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
Welding – Mig, Tig and Arc
Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to megan@personastaff.co.za
and indicate your salary expec
SECTOR: Engineering & Technical; Manufacturing
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004764/MM&source=gumtree
19h
1
SavedSave
CNC Operator
Our client is based in Stikland and they are seeking to employ CNC Operators. Do you have a matric certificate and at least two years CNC working experience? Are you willing and able to work 12-hour shifts that include nightshifts and weekends?
STRICT REQUIREMENTS:
• Completed Grade 12 / Matric Certificate (certificate will be requested).
• Milling and lathing experience will be an advantage.
• CNC Operating experience (Min 2 Years)
• Mic, Micrometers, size experience is a MUST.
• Must be hardworking and dedicated.
• Ability and willingness to work rotational 12-hour shifts, including nightshifts and weekends.
• Clean criminal record.
AREA: Stikland (Transport will be own responsibility)
PAY RATE: TBD
APPLY: Send your CV and all documents to megan@personastaff.co.za or phone 021 975 8297 for more information.
Only shortlisted candidates will be contacted.
Consultant Name: Megan Ockhuis
19h
1
SavedSave
ASSISTANT OPERATOR / GENERAL WORKER:
Our client is based in Stikland and they are seeking to employ Assistant Operators / General Workers. Do you have a matric certificate and at least one years working experience? Are you willing and able to work 12-hour shifts that include nightshifts and weekends?
STRICT REQUIREMENTS:
• Completed Grade 12 / Matric Certificate (certificate will be requested).
• Milling and lathing experience will be an advantage.
• Forklift license is beneficial.
• Any assistant operating of machinery experience will be an advantage.
• Must be hardworking and dedicated.
• Ability and willingness to work 12-hour shifts, including night shifts and
weekends.
• Clean criminal record.
AREA: Stikland (Transport will be own responsibility)
PAY RATE: R49.56 per hour
APPLY: Send your CV and all documents to melanie@personastaff.co.za or phone 079 081 9385 for more information.
Only shortlisted candidates will be contacted, if you have not received any feedback within 48 hours your application has been unsuccessful.
melanie@personastaff.co.za
19h
1
SavedSave
General Information
An exciting opportunity has become available for a Tool Maker at our Client in Silverton Pretoria.
Qualifications
Matric
Trade Test: Tool, Jig and Die Maker
5 - 10 years experience
Requirements
Experience working as a tool and die maker.In-depth knowledge of machine tools and their uses.Ability to read and interpret blueprints and design schematics.Extensive experience with metalworking tools including drills, milling machines, grinders, and lathes.Ability to lift heavy objects and operate large machinery.Experience with quality control analysis.Excellent attention to detail.Advanced troubleshooting skills.
Duties and Responsibilities
Reading and interpreting blueprints, design schematics, and CAD drawings.Visualizing and computing metal shapes and tolerances.Designing jigs and templates as work aids in the fabrication of parts.Measuring and marking metal stock for machining.Setting up machine tools such as drills, lathes, grinders, and milling machines.Cutting and shaping blocks to specified dimensions.Filling, grinding, and shimming metals to ensure a smooth finish.Fitting and assembling tools and die parts.Inspecting finished dies and tools for defects, smoothness, and contour deformities.Conducting test runs with completed tools and dies.
Client Overview
Our client is a mechatronics innovation and development company that specialises in bespoke industrial turnkey solutions, comprising of robotics, machine building, automated guided vehicles, packaging solutions, telemetry smart factory & city systems, aluminium kits building solutions, automated torque tools, and spray painting solutions. Directech has been in operation for the past 26 years.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zODAyMzYzMjU1P3NvdXJjZT1ndW10cmVl&jid=1141120&xid=3802363255
19h
1
SavedSave
Job Description
Reading and interpreting blueprints, design schematics, and CAD drawings.Visualizing and computing metal shapes and tolerances.Designing jigs and templates as work aids in the fabrication of parts.Measuring and marking metal stock for machining.Setting up machine tools such as drills, lathes, grinders, and milling machines.Cutting and shaping blocks to specified dimensions, sheet metal fitting.
Filling, grinding, and shimming metals to ensure a smooth finish.Fitting and assembling tools and die parts.Inspecting finished dies and tools for defects, smoothness, and contour deformities.Conducting test runs with completed tools and dies.
Qualifications:
Matric
Trade Test: Tool, Jig and Die Maker
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zMTc4NzUwNzM3P3NvdXJjZT1ndW10cmVl&jid=1209369&xid=3178750737
19h
1
Bending Operator / Lazer Cutting (CNC Operator)
Our client is based in Brackenfell and they are seeking to employ Bending Operator / Lazer Cutting (CNC Operator).
Do you have a matric certificate and at least two years CNC working experience?
STRICT REQUIREMENTS:
• Completed Grade 12 / Matric Certificate (certificate will be requested).
• CNC Operating experience (Min 2 Years).
• Sheet Metal bending experience or;
• Laser cutting experience.
• Milling and lathing experience will be an advantage.
• Must be hardworking and dedicated.
• Clean criminal record.
Please send your CV and salary expectations to julia@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.Consultant Name: Julia Hillier
20h
1
Our client is based in Brackenfell, and they are seeking to employ Bending Operator/ Lazer Cutting (CNC Operator).
Do you have a matric certificate and at least two years CNC working experience?
STRICT REQUIREMENTS:
• Completed Grade 12 / Matric Certificate (certificate will be requested).
• Milling and lathing experience will be an advantage.
• CNC Operating experience (Min 2 Years)
• Must be hardworking and dedicated.
• Clean criminal record.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
reception@personastaff.co.za
20h
1
Our client is based in Brackenfell and they are seeking to employ Bending Operators / Lazer Cutting (CNC Operators).
If you have a matric certificate and at least two years CNC working experience then contact us today.
STRICT REQUIREMENTS:
• Completed Grade 12 / Matric Certificate (certificate will be requested).
• CNC Operating experience (Min 2 Years).
• Sheet Metal bending experience or;
• Laser cutting experience.
• Milling and lathing experience will be an advantage.
• Must be hardworking and dedicated.
• Clean criminal record.
TO APPLY: Send your CV and all documents to liza-nelle@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.Job Reference #: Bend/OPConsultant Name: Liza-Nelle Swanepoel
20h
1
SavedSave
Fitter & Turner
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements:
• Grade 12 / National Senior Certificate.
• Section 13 Fitter and Turner Trade Test Certificate.
• 3 - 5 years post trade experience.
• Experience within a manufacturing environment (beneficial).
• Energetic, proactive and able to work under pressure.
• A valid driver’s license with own reliable transport.
Skills and Knowledge Required:
•Preventative Maintenance Routines.
•Welding (Mig Tig & Arc), Milling, and Turning.
•Planning - Check that all part complies with procurement register and data pack. (Report any deviations) Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
•Material Cutting - bandsaw, cut-off saw, cutting torch, grinder.
•Drilling and/or slotting holes: Proper use of hand drill, Mag base drill, machining machine, etc.
•Finishing/Grinding: Remove all shape edgers, burs, welding spatter, etc. (Prep for next phase)
•Machining and fitting related tasks - planning: Check that all part complies with procurement register and data pack. (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
•Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
•Machining: Use appropriate machinery to execute tasks for e.g.: Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
•Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
•Pneumatics and Hydraulics.
•Gearboxes.
•Water Systems and Cooling Towers.
•Basic Electrical Experience.
•Bearing and Shaft Changing.
•Fault Finding and Diagnosis.
•Lubrication.
Please forward your CV to megan@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
megan@personastaff.co.za
20h
1
SavedSave
Boilermaker (6-month Contract Position)
Our client, based in the Northern Suburbs, is an Internationally established Manufacturing company. They are seeking to appoint a qualified and experienced Boilermaker on a 6-month contract position.
Minimum Requirements:
• Grade 12 / National Senior Certificate.
• Qualified Boilermaker Trade Test Certificate.
• Minimum of 1 -2 years’ post trade experience.
• A valid driver’s license with own reliable transport.
Skills and Knowledge Required:
•Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
•Welding – Mig, Tig and Arc
•Drilling and/or slotting holes. Proper use of hand drill, Mag base drill, machining machine, etc.
•Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc. (Prep for next phase)
•Machining and Fitting - Planning: Check that all part complies with procurement register and data pack. (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
•Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
•Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
•Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
•Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
•Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc. installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to megan@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
megan@personastaff.co.za
20h
1
Our client, based in the Northern Suburbs, is an Internationally established Manufacturing company. They are seeking to appoint a qualified and experienced Boilermaker on a 6-month contract position.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Qualified Boilermaker Trade Test Certificate
Minimum of 1 -2 years’ post trade experience.
A valid driver’s license with own reliable transport
Skills and Knowledge Required
Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
Welding – Mig, Tig and Arc
Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to megan@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.Salary: R120 - 150 p/hConsultant Name: Megan Ockhuis
20h
1
SavedSave
Fitter and Turner.
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driver’s license with own reliable transport.
Skills and Knowledge Required
Preventative Maintenance Routines.
Welding (Mig Tig & Arc), Milling, and Turning.
Planning - Check that all part complies with procurement register and data pack.(Report any deviations) Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
Material Cutting - bandsaw, cut-off saw, cutting torch, grinder.
Drilling and/or slotting holes: Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding: Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and fitting related tasks - planning: Check that all part complies with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g.: Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Pneumatics and Hydraulics.
Gearboxes.
Water Systems and Cooling Towers.
Basic Electrical Experience.
Bearing and Shaft Changing.
Fault Finding and Diagnosis.
Lubrication.
Please forward your CV to megan@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.Consultant Name: Megan Ockhuis
20h
Save this search and get notified
when new items are posted!