Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Suggested
Results for trainee machine operators in Jobs in South Africa
1
Specific duties :
1. Observe the established policies and procedures relating to quality management.
2. Primarily responsible for the reviewing and inspection of raw materials, instruments, and manufactured goods over several departments including the turning sections, CNC, fabrication, goods receiving and fabrication as well as final check / release, during setup, in production and final approval.
3. Conduct First Off (“F/O”) Inspections after machine set ups, and make a final go/no-go decision as to whether to commence with production. Confirm that the customer requirements and specifications are met prior to the commencement of production by comparing F/O samples with drawings and stated requirements. Prepare slip / slide gauges and other required gauges and communicate use of gauges to operators and setters. Ensure that correct material is used as per specification and place relevant samples and gauges at the machine.
4. Conduct in-process routine and ad hoc inspections in assigned areas by visually inspecting products and measuring products with measurement instruments including, but not limited to verniers, micrometers, clock gauges and thread gauges. Where appropriate compare with customer samples and issued equipment. Ensure that inspections are done at the commencement of each shift and that verification samples are provided for inspection by management.
5. When, variances, deviations from specifications, discrepancies, and non-conformances are encountered: the Inspector must stop production and ensure that parts in the machine are segregated for further inspection. The inspector must be able to identify the required adjustments and changes and communicate the required changes to the setter.
6. Inspect final products prior to release and make a final decision approval decision if products comply with the customer specification. Conduct visual and measurement inspections and determine the correct inspection sample. Take responsibility for the final release if product complies with the specifications. Inspect and release outsourced products prior to dispatch. Approve final products by confirming specifications.
7. Ensure that the quality control reports and documentation are properly completed and up to date as required by the quality management system.
8. Safeguard and use measurement equipment correctly.
SKILLS AND EDUCATIONAL REQUIREMENTS
Ability to communicate effectively both verbally and in writing. Matric with mathematical pass rate essential. Technical knowledge (N3 or higher) advantageous. Background in mechanical engineering (work experience) and diploma will be advantageous.
INTER-RELATIONSHIPS
Contact with all levels of personnel within the company as well as suppliers and customers when required.
WORKING CONDITIONS
MAJOR PERFORMANCE AREAS
1. Respond to enquiries and solve problems.
2. Must be able to read and interpret drawings
3. Strong technical skills and accuracy in visual and instrumen
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18yMzIzXzkzMTNfXzQ5Nz91dG1fc291cmNlPWd1bXRyZWUmdXRtX21lZGl1bT1mZWVkJmtleXdvcmQ9&jid=1795865&xid=2323_9313
.special-hidden
{
display: none;
}
7d
1
Cape Town - Our client provides distribution services and technology solutions to the entertainment industry. They help studios, broadcasters and digital retailers localize and distribute their feature and episodic titles to global audiences on-time and with superior quality.Ideally, we want candidates with experience within broadcasting/film industry, however we can look at graduates with relevant degrees (Broadcasting, Film, English, Linguistics etc)DescriptionEnglish Editor - Tech Services (Apps & Technology, Subtitles, Scripts and Transcription)Our service offerings cover end-to-end workflows including language services such as scripting, subtitling, access services, dubbing, text and metadata localization in over 50 languages. Our technical services master and prepare this content in all distribution products including digital cinema, digital media and physical media (Ultra HD Blu-ray, Blu-ray and DVD).To date, we serviced thousands of titles for iTunes, Google Play, YouTube, Netflix, Amazon, Movies Anywhere and others. We also authored thousands of Ultra HD Blu-ray, Blu-ray and DVD discs. Our research and development team works on cutting-edge technologies such as 4K, high dynamic range (Dolby Vision, HDR10+), artificial intelligence and machine learning, software automation and our proprietary end-to-end operating platform branded as pHelix.Experience start-up at scale. Be part of building innovative solutions to service our media and entertainment clients and help us fulfill their content distribution needs. Join us if you’re passionate about entertainment, innovation and customer service excellence!About the roleJoin a new team of technically focused operators who will work closely with technology developers to bridge the gap between tech development and production, to support and streamline the use and testing of AI, automation, voice-to-text transcription, editing and language tools, systems and processes.Successful candidates will work 4X10 hour shifts per week upon completion of training.Testing processAll candidates will be required to complete an international industry standard transcription test and proofing test. The tests are designed to highlight your English grammar, spelling, punctuation and listening skills. They are also designed to showcase your feel for the type of tasks required for the position. The purpose of the test is not to test your knowledge of the software or technical specifications of subtitling. It is a prerequisite for considerationTrainingSuccessful editors will be given training by our experienced team and approved by a US specialist before beginning work on live projects. The training and initial experience portion will be completed during a paid internship period. Once we have established the groundwork, permanent positions will be made available to all editors able to meet the performance requirements.Responsible for the technical support and preparation of files for voice to text automation & custom le
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzUxMzcxX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1193387&xid=1266_51371
.special-hidden
{
display: none;
}
2y
1
Our client in the Manufacturing / Supply industry is seeking two Trainee Block Makers to join their company, based in Port Elizabeth / Gqeberha. Requirements:Available Immediately.Technical or Trade (Fitter).At least N3 (Matric) plus trade qualification.Minimum 3 years’ experience in automated production plants as an operator (mechanical maintenance and repairs).Numerical literacy.Experience leading a small team in a similar environment.Solid technical experience.Experience operating SCADA systems.Competent Microsoft Office (Advantageous)Good reading and writing skills.Good communication skills.Accuracy and attention to detail.Responsibilities:Know concrete and continuously monitor the batching for accuracy and consistency per product.Plant and equipment availability.Understand the block machine, setup, and its settings per mould.Understand the concept of Throughput (TP).Make exceptional quality the first time.Choose, know, and guide your team.Health and safety.Record keeping and reporting.Hand over to the next shift Block Maker and writing the information of the past shift with all its achievements and failures.Have a meetings to highlight the safety, quality, production and attendance issues from the previous shifts and the targets for the shift.Ensure that the machine is set up correctly.Continually inspect the various sections of the production process to ascertain correctness and to correct where necessary.In the case of day shift, the machine is to be stopped for no more than 4 hours for cleaning and maintenance. In this time the BM must ensure that all areas are cleaned correctly.Moulds should be planned for and changed in this cleaning time, ensuring mould change downtime is kept to a minimum.Before the end of the shift the BM must check and sign off the Daily Production Sheet for their shift and prepare the handover log/register to ensure that all plant and production issues are brought clearly to the relieving BM’s attention. If you are not contacted within two weeks of applying, please consider your application unsuccessful
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQ4ODY2X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1185384&xid=1266_48866
.special-hidden
{
display: none;
}
2y
Company based in Sunnyrock, Germiston urgently needs a CNC Mill, Lathe - CAD/CAM Trainer & Applications Engineer.The compulsory
skill set must be:Â -Knowledge of CNC Mill & Lathe (Programming & Operating)-Experience in EDGECAM or Mastercam or Solidworks-Available for Saturday Training (2 Saturdays a month)
Job Summary:
As an Applications Engineer & Training Facilitator for CAD CAM (Computer-Aided Design/Computer-Aided Manufacturing) software and Metrology equipment, your primary responsibility will be to provide technical expertise, application support, and training to customers and internal teams. You will play a crucial role in ensuring the successful implementation and utilization of CAD CAM and Metrology equipment & software solutions. This position requires a strong background in engineering, CAD CAM software, and exceptional problem-solving and communication skills.Qualifications:
Qualified tool maker / fitter and turner (advantageous)Proven experience as a CNC machinist with expertise in both milling and lathe operations.Proficiency in programming CNC machines using CAM software and G-code.Experience in using EDGECAM / MASTERCAM / SOLIDWORKS.Strong knowledge of CNC machining principles, tooling, and materials.Excellent communication and presentation skills.Ability to adapt training methods to accommodate diverse learning styles.Patient and approachable demeanor with a passion for educating others.Physical Requirements:
Ability to demonstrate and supervise hands-on training activities.Comfortable working in a machine shop environment.Application Support:
Provide prompt and accurate technical support to customers and internal teams via various channels (e.g., phone, email, chat).Troubleshoot and resolve software-related issues, conducting in-depth investigations when necessary.Collaborate with software development teams to escalate and resolve complex technical issues.Responsibilities:
Training Program Development:
Design and develop comprehensive training programs for CNC milling and lathe operations.Create instructional materials, presentations, and hands-on exercises to facilitate effective learning.Classroom Instruction:
Conduct theoretical classroom training sessions covering CNC & CAD/CAM machining principles, programming, and safety procedures.Use multimedia tools and resources to enhance the learning experience.Assess and adjust instructional methods based on the needs of individual trainees.Hands-On Training:
Coordinate and conduct practical, hands-on training sessions on CNC milling and lathe machines.Guide trainees in machine setup, tooling, programming, and troubleshooting.Provide real-world examples and scenarios to reinforce practical skills.Skill Assessment:
Evaluate trainee performance through practical assessments and written examinations.Provide constructive feedback to help individuals improve their skills.Curriculum Enhancement:
Stay current with industry advancements in CNC machining technology.Update training ma
SECTOR: Engineering and Technical
Job Reference #: JHB000336/AH
10d
1
Experience in deep learning algorithms, large datasets, and unstructured dataExperience in Machine Learning solving business problemsEnrolled in a B. Degree Computer Science/Statistics/Applied Statistics/Applied Mathematics (Postgraduate preferable)Implements analytical algorithms for object detection, segmentation, classification, and recognitionIs responsible for discovering insights and identifying business opportunities using algorithmic, statistical, and mining techniquesPlays a strategic role in creative ideas for leveraging the business vast collection of data into new ground-breaking IT solutionsEstablishes accurate and scalable analytics systemsInterprets the results of statistical and predictive experiments and regression analysis and integrates this into complex business processesConducts customer specification studies, gathers requirements, conducts system architectural design and turns the requirements into a final productProvides complete application lifecycle development, deployment, and operations support for Big Data solutions and infrastructureCollaborates with various team members and facilitates the development, automation, and seamless delivery of analytics solutions into Big Data clustersIs responsible for Data Warehousing and ETL using Informatica Power CenterAnalyses the data and build reports by using data visualisation tools such as Tableau, Cognos, MicroStrategyImports and exports data using Sqoop from HDFS to Relational Database Systems and vice-versaCodes and tests the Standardisation, Normalisation, Load, Extract and AVRO models to filter / massage the data and its validationLanguages: Python, Scala, SQL, Java, PL/SQLWeb Technologies: Web Service, SOAP, Rest web services, JSPBig Data Eco System: HDFS, Spark, Yarn, Map Reduce, Hive, Pig, Sqoop, ZooKeeper, Kafka, Oozie, Hue, Impala,Scripting Languages: HTML, JavaScript, CSS, XML and AjaxMachine Learning: R, SAS, Python, SKLearn, MATLAB, Octave, Spark MLNo SQL Databases: Cassandra, HBase, MongoDB, VerticaCloud: AWS, EC2, S3, EMR, AzureOperating System: Windows, Linux and UnixBI/DWH/ETL Tools: Informatica 5/9.1/8.6, Tableau, CognosDBMS / RDBMS Oracle 12c/11g, SQL Server 2014, DB2, Teradata 14/12, AWS RedshiftIDEs: Eclipse, Jupiter Notebooks, Microsoft Visual Studio, Flex Builder, Spyder, TOAD, NetBeans, PL/SQL Developer, Putty, Squirrel SQLVersion Control: SVN, CVS, Git, and Rational Clear Case
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5Xzc0MjcwX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1189320&xid=1109_74270
.special-hidden
{
display: none;
}
2y
Save this search and get notified
when new items are posted!