Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Suggested
Results for factory machine operators in Jobs in South Africa
SavedSave
Job Title: Technician
Our Company specializes in the manufacturing and printing of
woven polypropylene bags, our long-standing company pride ourselves on high
quality standards and always meeting customer demands.
Our Company is looking for a Technician that has
experience with working, servicing, fixing and knowing the running process of
the following machinery, Cut and Sew machines, Reel-to-reel Flexo In-Line Print
machines, Bale press machines and stitching machines.
Job purpose: Ensuring all machines are
fully functional and operating correctly. Maintaining and fixing machines when
necessary.
Responsible for: Settings,
Repair and Maintenance of all machines.
Key Responsibilities:
·
Maintenance and repairs and setting of all
machines within the Factory.
·
Identification of fault on a machine.
·
Changing needles on stitching machines.
·
Basic setup and settings for cut and sew
machines, example eye mark sensor setup.
·
Changing or fixing belts on machines knowledge
of pneumatic cylinders.
·
Identification of parts that needs to be
replaced on machines (sprockets and chains).
·
Ensure bags open correctly.
·
Ensure stitching folds are correct.
·
Check that printing is correct while the machine
is running.
·
Approve prints before printing can take place.
·
Stock take and stock management on engineering
stock.
·
Help other technicians carry out work inside
workshop (Team Player).
Requirements:
·
Grade 12
·
Must be a team player.
·
Experience with the following machines:
o
Cut and Sew machine.
o
Reel-to-Reel Flexo In-Line Print Machine.
o
Bale press machine.
o
Stitching machine.
·
Able to work with electrical components.
·
Physically in good shape.
·
Able to work shifts (Day shift and Night shift).
·
Able to read.
·
Able to follow instructions correctly and
precise.
Please forward your CV to ameen@jhg.co.za or WhatsApp your CV to 0837417254.
The vacancy closes on 10 May 2024, if you do not get a response within a week
of the close of this week consider your application unsuccessful.
1d
1
MAINTENANCE MANAGER –BBEEE candidates only- Epping- R700, 000 -R800, 000 per annum Neg
(SORT DRINK, FILLING, BOTTLING, PACKAGING, CAPPING)
Bottling Plant seeks a Maintenance Manager to be accountable for maintaining quality, standards, service and desired outputs within inter-related functional areas of responsibility. You will set frameworks of policies and procedures and take accountability for managing operational projects within the maintenance space, ensuring infrastructure maintenance initiatives are carried out successfully within agreed timeframes, cost and scope. You will also manage ad hoc maintenance requests, ensuring issues are addressed within agreed SLAs. You need exposure to multi-head fillers, cappers, labellers, crate washers and packers, shrink wrappers, blow moulders etc.
You will manage all maintenance and related activities to ensure optimal levels of plant and equipment availability, ensure all equipment and safety standards are maintained, manage ad hoc maintenance requests, ensure issues are addressed within agreed SLAs, effectively manage relationships with contractors and suppliers, provide expert advice and help efficiently resolve maintenance queries General Operational and Financial Management, actively participate in operational planning and budgeting processes
You will drive continuous improvement through streamlining and optimising relevant operational practices, processes and systems, ensure adherence to operational and financial frameworks of practices, processes, standards and controls, control cost and take the necessary action to mitigate any financial risks or non-compliance.
Min Bachelor’s Degree (3 years) / NQF level 7 (Essential), 8 years’ experience in a Maintenance Manager role; experience in FMCG; Bottling Equipment, Soft Drink, Packaging, Palletizing, Labelling. MS Excel; SAP; MS PowerPoint; MS Word; E-Mail. You will need to be energetic, fit and in good health.
Your Team:
• 3 Process Artisans (2 close to retirement, 1 of whom has long service),
• Electrical Artisan,
• Blow Mould Technician,
• Greaser/Artisan Aid (over 20 years’ service in Production),
• Stores Person (a female machine operator recently promoted into the new position), and
• an Administrator.
The Factory works shifts and runs 24/7 in peak season. The shift pattern is 4 on and 2 off with 3 teams of 20.
Mail a detailed (lots of technical detail, including machinery exposed to) CV to anthonyjobs@wcp.co.za
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS9BS0FEMjgwNzIwMjItMj9zb3VyY2U9Z3VtdHJlZQ==&jid=1300194&xid=AKAD28072022-2
3d
1
SavedSave
Opportunity Available!! Our leading client in the Automotive Sector is looking to employ a Production Superintendent to join their dynamic team in Durban.
Job Description:
Ensure the factory is staffed with the correct budgeted staffing levels. Ensure that overtime forms are checked and signed off before submission to Manufacturing Director.
Ensure safety standards are implemented and maintained throughout the plant.
Ensure the Operators receive the correct Product Training at ‘First Off’ stage
Assistant Setters to be issued with correct tools, and tools and equipment checked and verified on a weekly basis.
Deliver on required Operating Efficiencies, maintain scrap at recommended rate, and manage downtime
Ensure the moulding machines, Production Tools and Ancillary equipment is in good working order.
Ensure tooling can produce parts to the agreed Quality Standard as defined by the ‘Master Sample’.
Ensure production plan is followed, and parts produced within the allocated time frame.
Cycle time of every machine to be achieved and ensure that works order cycle time to be always used.
Machine Cycles recorded on Produmax must balance up with good parts produced and Reject parts produced for the shift.
Works Order must be balanced up, and jobs that are short run are to have the unused material, returned to Stores and signed off on the Works Order.
Machines and factory floor to be cleaned and kept clear of debris, purge, sprues, oil, dust etc.
Implement 4S activities to ensure the factory is always kept clean and tidy.
Boxes / Dunnage’s to be labelled as they are filled. And QC approved boxes / Dunnage’s to be removed from the shop floor to the WIP or FG Store.
Tool Change to start only after all requirements of the check sheet have been met and everything is prepared.
Tool Change times to be kept within the prescribed times.
First off submission to be done within the prescribed time.
Correct Tool Breakdown procedure to be followed.
All documentation to be available at Workstation before production can commence.
Hourly Production patrols done on machines to ensure compliance to cycle time, hourly count and quality.
2% Rejection Procedure and Escalation to be strictly followed.
All parts manufactured to be to the level of the First Off Sample or better.
Zero SSN’s
Manage the KPI’s of Subordinates
Enforce discipline in Workplace
Job Requirements:
Matric + National Diploma in Production Management or equivalent operations qualification.
5 years of relevant experience in a production environment working with an unionised workforce as a Supervisor. Preferred in injection moulding manufacturing
Working with a manufacturing system preferred Produmax
SECTOR: Automotive
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93ZWJhcHAucGxhY2VtZW50cGFydG5lci5jb20vd2kvYXBwbGljYXRpb25fZm9ybS5waHA/aWQ9c3RhZmZzb2xzJnZhY2FuY3lfcmVmPUUuTDAwMTk0Ny9CRw==&jid=1795025&xid=E.L001947/BG
3d
1
SavedSave
General Information
An exciting opportunity has become available for a Tool Maker at our Client in Silverton Pretoria.
Qualifications
Matric
Trade Test: Tool, Jig and Die Maker
5 - 10 years experience
Requirements
Experience working as a tool and die maker.In-depth knowledge of machine tools and their uses.Ability to read and interpret blueprints and design schematics.Extensive experience with metalworking tools including drills, milling machines, grinders, and lathes.Ability to lift heavy objects and operate large machinery.Experience with quality control analysis.Excellent attention to detail.Advanced troubleshooting skills.
Duties and Responsibilities
Reading and interpreting blueprints, design schematics, and CAD drawings.Visualizing and computing metal shapes and tolerances.Designing jigs and templates as work aids in the fabrication of parts.Measuring and marking metal stock for machining.Setting up machine tools such as drills, lathes, grinders, and milling machines.Cutting and shaping blocks to specified dimensions.Filling, grinding, and shimming metals to ensure a smooth finish.Fitting and assembling tools and die parts.Inspecting finished dies and tools for defects, smoothness, and contour deformities.Conducting test runs with completed tools and dies.
Client Overview
Our client is a mechatronics innovation and development company that specialises in bespoke industrial turnkey solutions, comprising of robotics, machine building, automated guided vehicles, packaging solutions, telemetry smart factory & city systems, aluminium kits building solutions, automated torque tools, and spray painting solutions. Directech has been in operation for the past 26 years.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zODAyMzYzMjU1P3NvdXJjZT1ndW10cmVl&jid=1141120&xid=3802363255
3d
1
SavedSave
Our client based in the Northern Suburbs; of Cape Town is seeking to employ General workers who have worked in a Manufacturing environment before.
REQUIREMENTS:
•Grade 12 / Senior Certificate
•Must be available immediately.
•Operated various machines
•Worked in a manufacturing or dispatching environment before.
•Housekeeping & cleaning of the factory.
TO APPLY: Send your CV and all documents to liza-nelle@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.Job Reference #: Gen/NSConsultant Name: Liza-Nelle Swanepoel
3d
1
SavedSave
Qualifications
- Must have a diploma or degree in work study / production management
- 5 years managerial experience in the clothing industry
- Project management experience
Responsibilities
- Visit various factories within the group
- Ensure that plants are reaching production targets
- Ensuring quality
- Ensuring that training is maintained at all times
- Implementation of new technology
- Good knowledge of work study and GSD preferably
- Ensure all systems at each plant are strictly adhered to
- Motivation and training of all production employees (from machinist through to production manager)
- Ability to fast react i.e. introduction of new styles to be put onto machines for urgent delivery
- Critical thinking and problem solving skills
- Strong planning and financial background (preferable, not essential)
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zNDc1Mjg5MDg4P3NvdXJjZT1ndW10cmVl&jid=1191695&xid=3475289088
3d
1
SavedSave
East LondonTo plan and produce daily and weekly production requirements according to the production plan Qualification:· Production Management Diploma Experience:· 5 years manufacturing experience· 2 years supervisory experience in a Production capacity Responsibilities: Ensure that the men, machinery and materials are available andefficiently utilised· To ensure that there is sufficient chemical mixed to complete thedaily production plan and that the machinery is properly maintained.· First- off checks must be performed on all parts on a daily basis· Motivates, appraises, counsels and disciplines employees in the Department· Monitors work performance plan and corrects deviations Monitors labour costs against sales achieved so as to ensure that the labour target is reached and maintained.· Monitors production to ensure that there is sufficient chemical mixed to support production.· Ensures correct start up procedures are complied with and that machinery is in good running order at all times.· Monitors and collates the achievement of daily production targets. Takes corrective action where necessary.· Assists the Logistics Specialist in production planning, machinery capacity planning and training needs planning and conveys to the operators.· Ensures that both production cells have the machines calibrated weekly or as specified.· Ensures safe working conditions and the application of safe working practices in all areas of the department.· Overtime authorisation form and submits to the Plant Manager for approval.· Assist the Plant Manager with specific projects.· Maintains personnel records, especially timekeeping and disciplinary matters of all employees.· Responsible for reporting any faults on machinery to the Plant Manager.· Responsible for the quality of production. Where there are any quality problems, utilises previous experience as well as the technical expertise of the quality/control department and process engineering to resolve problems.· Responsible for displaying the latest level of work instruction sheets .· Assist the Quality Assurance Engineer in performing Process Capability studies, FMEAs and new product FMEAs.· Resolves critical areas in production flow with the assistance of the Plant Manager.· Complies with all statutory requirements.· Attends all meetings and training courses as requested.· Ensures all lockout procedures are followed.· Ensures planned maintenance schedules are adhered to.· Monitors continuous improvements and makes suggestions to maximise production output.· Ensure Factory complies to the requirements of ISO9001/ IATF16949.· Trains labour to be multi skilled and keeps a record of levels achieved.· FIRST- OFF Production parts monitored in conjunction with the Quality Assurance dept.· Ensure that downtime is kept to below 5% of total machine hours and ensure actions are submitted on how to reduce lost time per shift.· Carry out daily audits of the production areas (housekeeping, PPE inspections, emergency equipme
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQ3MTc1X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1177869&xid=1266_47175
2y
1
SavedSave
We are looking for a Continuous Improvement Manager to assess, monitor, and enhance business performance for the organisation. The Continuous Improvement Manager will analyse current practices and develop business process improvements as well as implement changes in workflows, structures, and teams to ensure continuous company performanceDuties:Demonstrate a deep understanding, enthusiasm and passion for continuous improvement and implement this across the entire plantImplement cost effective systems of control over capital, operating expenditure and staffingApply sound Industrial Engineering techniques to improve operating performance and reduce wastage and delaysEnsure high production and produce cost reductions and higher levels of efficiencyDevelopment of manufacturing methods to improve material handling in productionPlan, co-ordinate and maintain all manufacturing information and systemsDevelop most efficient ways to use people, machines, materials, information, and energy to make a product or serviceStudy product requirements and design manufacturing and information systems to meet requirementsAssist in financial planning and cost analysisDrive Quality Control Program to ensure all products, raw materials, processes and services meet exceptionally high-quality standardsDesign and develop quality documentation, i.e., procedures, work instructions, inspection and sampling plans, as needed or requestedMaintain documentation and revision level of quality documentation for all products or servicesWork with Product Development to create product specific quality processes for all new productsMaintain and communicate all quality data to department managers for problem identification, resolution, loss reportingCoordinate returns to vendors and ensure corrective actions are in place to prevent future defectsDetermine most viable plant factory locations and layouts for new investments or machinesDesign layout of equipment and workspaceStudy and rearrange organisational charts, material flow, and operations sequenceIncorporate safety, shop floor organisation and plant cleanliness among plant personnelSupervisory Responsibilities Lead and facilitate continuous improvement efforts by managing and directing staffTrain and improve staff to ensure that the required KPIs are within the requirements of the companyEstablish, enhance and maintain effective communication between yourself, the Departments Manager Foreman and 2ICsGeneral assistance to Plant ManagerQualifications and Experience: Matric (essential)Completed Bachelors Degree or B-tech in Industrial Engineering (essential)Lean six sigma qualification (beneficial)Computer Literacy in MS Office (essential)At least 2-4 years proven experience in steel fabrication industry and lean manufacturing with proven continuous improvement analytical experience from a similar role, in
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzY5NjQyX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1175848&xid=1109_69642
2y
1
Millwright Johannesburg Gauteng Purpose of Position: Complement Recruitment are recruiting for a Qualified Millwright for a permanent position in Sedibeng, Gauteng. The purpose of this position is Maintenance of machinery and plant to ensure continued mechanical operation andperformance within a Lean Manufacturing environment. Ensure that all maintenance operations are conducted within the quality, health and safety requirements of the company. This role reports directly into the Maintenance Manager. Salary market related depending on experience and industry skillset.Check out Our Site Apply Directly for this Job by clicking here - https://bit.ly/3LkgmiK Minimum Requirements :Matric (Standard 10) or recognized equivalent qualificationTrade Test Certification (Millwright)At least 5 (five) years working experience, a strong aptitude for electrical fault finding and trouble-shooting, experience in hydraulics and pneumatics, and be able to liaise effectively with suppliers for spares specifications and requirements.Located in Vanderbijlpark, Vereeniging or surrounding areas in the Sedibeng AreaGood working knowledge and experience in steel manufacturing, as well as a good understanding of PLCs and general programming (Siemens S5/S7 preferably) would be an added advantage.Be prepared to work overtime and be placed on standby when required.Be prepared to use their initiative and be able to complete tasks successfully and expeditiously with minimum supervision.Able to demonstrate good communication skills and be fully literate in English.Be a strong team player and have a passion to learn new things.Exposure to world class manufacturing techniques like Lean Manufacturing, TPM andSix Sigma would be an added advantage. Duties: Daily, Weekly, Monthly KPIs Maintenance of machinery and plant as a whole and specific designated individual responsible area to ensure continued mechanical operation.To report to the Maintenance Manager any problems or faults and breakdowns occurring within the plant.To plan and discuss preventative maintenance with the Maintenance Manager.To comply with the standby schedule, safety requirements as prescribed by Company and any requirements of the OHS Act that are indicated as your responsibilities by the Maintenance Manager.Has the authority to stop any machine or practice that is unsafe, or not producing quality products in consultation with either the supervisor, maintenance manager or factory manager.To develop and improve all aspects of the production lines technically.To correctly complete work orders issued to him or generated by him, and to return them to the Maintenance Manager. (E.g. the fabrication of machinery / safety guards according to drawings, refurbishing machinery and moving parts, attending to breakdowns.To fur
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzY3MTUyX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1166014&xid=1109_67152
2y
1
SavedSave
*Reference: BOK002227-LA-1*
Trade Tested Turner
Qualification
* Trade Tested Turner
Requirements
* Must have CNC programming experience on Edgecam/Fusion 360
* Turning experience in a factory / manufacturing environment
* Must have precision machining experience on *Lathe *machines (will be tested)
* Must be able to read and interpret engineering drawings
* Able to operate overhead crane and/or forklift
R
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI5MDY3X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1199586&xid=1555_29067
2y
1
Agricultural
Machine Operator & Mechanical Manager
Mixed farming
enterprise in the Eastern Free State (near Ladybrand) requires a competent and
reliable addition to this family-run team. The focus of the role falls strongly
in cropping – in operating and maintaining agricultural machinery. However, the
other aspects of the role will be aligned to the applicant’s skill set and the
farm’s seasonal priorities.
REQUIREMENTS
Previous agricultural
machinery operator experience – particularly combining & spraying.
Minimum 3 yearsMechanic trade certificate
or diploma advantageous“Mechanically-minded”Proven experience working
and repairing farm related implementsExperience in or managing a
factory / warehouse / processing facility advantageousFlexibility in a mixed
farming enterprise – taking on responsibilities based on the season and
farming requirements; as well as the applicant’s skill setValid driver’s licenseAbility to communicate in
English and Sotho; and work as part of a team
PACKAGE
·
Salary based on experience
·
Accommodation on the farm provided
·
Vehicle for farm-use supplied
APPLICATION
To apply for the position, please submit brief CV. Please include
specific information on your mechanical experience, as well as reference
contact details.
Note that should you not receive a reply, your application has not been
successful. We appreciate your time in sending your CV.
10d
1
SavedSave
Duties:To oversee all mechanical and electrical maintenance systems, processes, practices and people to support the operational department actions, aligned with operations plan to ensure plant optimization and efficiency, maintenance planning, and capital spares optimizationThe maintenance manager will also be responsible for implementing preventative maintenance strategies to minimize downtime and maintain a safe and functional work environmentManage and monitor unit health, safety, environmental and quality aspectsEnsure sound and effective financial managementBuild solid customer and supplier relationshipsEngineering support for operationsBusiness improvement initiation and implementationEffective and efficient reporting to enable strategic decision-makingEffective people managementAssess and plan to prevent machine and operational failuresUpgrade and replace operational equipment critical for gaining a competitive advantageRequirements:BSc or BEng in Mechanical or Electrical EngineeringMEng would be an added advantageGCC Factories would be an added advantageGMR (2.1) experience is an advantageProposed 5 years minimum experience in maintenance and engineering roles in an industrial/manufacturing environment, with exposure to the main engineering and plant optimization
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzE2OTc5MV9fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1758303&xid=1108_169791
4mo
1
SavedSave
East LondonTo plan and produce daily and weekly production requirements according to the production plan Qualification:· Production Management Diploma Experience:· 5 years manufacturing experience· 2 years supervisory experience in a Production capacity Responsibilities: Ensure that the men, machinery and materials are available andefficiently utilised· To ensure that there is sufficient chemical mixed to complete thedaily production plan and that the machinery is properly maintained.· First- off checks must be performed on all parts on a daily basis· Motivates, appraises, counsels and disciplines employees in the Department· Monitors work performance plan and corrects deviations Monitors labour costs against sales achieved so as to ensure that the labour target is reached and maintained.· Monitors production to ensure that there is sufficient chemical mixed to support production.· Ensures correct start up procedures are complied with and that machinery is in good running order at all times.· Monitors and collates the achievement of daily production targets. Takes corrective action where necessary.· Assists the Logistics Specialist in production planning, machinery capacity planning and training needs planning and conveys to the operators.· Ensures that both production cells have the machines calibrated weekly or as specified.· Ensures safe working conditions and the application of safe working practices in all areas of the department.· Overtime authorisation form and submits to the Plant Manager for approval.· Assist the Plant Manager with specific projects.· Maintains personnel records, especially timekeeping and disciplinary matters of all employees.· Responsible for reporting any faults on machinery to the Plant Manager.· Responsible for the quality of production. Where there are any quality problems, utilises previous experience as well as the technical expertise of the quality/control department and process engineering to resolve problems.· Responsible for displaying the latest level of work instruction sheets .· Assist the Quality Assurance Engineer in performing Process Capability studies, FMEAs and new product FMEAs.· Resolves critical areas in production flow with the assistance of the Plant Manager.· Complies with all statutory requirements.· Attends all meetings and training courses as requested.· Ensures all lockout procedures are followed.· Ensures planned maintenance schedules are adhered to.· Monitors continuous improvements and makes suggestions to maximise production output.· Ensure Factory complies to the requirements of ISO9001/ IATF16949.· Trains labour to be multi skilled and keeps a record of levels achieved.· FIRST- OFF Production parts monitored in conjunction with the Quality Assurance dept.· Ensure that downtime is kept to below 5% of total machine hours and ensure actions are submitted on how to reduce lost time per shift.· Carry out daily audits of the production areas (housekeeping, PPE inspections, emergency equipme
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQ3MTc1X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1177869&xid=1266_47175
2y
1
SavedSave
Complement Recruitment are recruiting for a Qualified Millwright for a permanent position in Sedibeng, Gauteng. The purpose of this position is Maintenance of machinery and plant to ensure continued mechanical operation and performance within a Lean Manufacturing environment. Ensure that all maintenance operations are conducted within the quality, health and safety requirements of the company. This role reports directly into the Maintenance Manager. Salary market related depending on experience and industry skillset.Minimum Requirements:Matric (Standard 10) or recognized equivalent qualificationTrade Test Certification (Millwright)At least 5 (five) years working experience, a strong aptitude for electrical fault finding and trouble-shooting, experience in hydraulics and pneumatics, and be able to liaise effectively with suppliers for spares specifications and requirements.Located in Vanderbijlpark, Vereeniging or surrounding areas in the Sedibeng AreaGood working knowledge and experience in steel manufacturing, as well as a good understanding of PLC’s and general programming (Siemens S5/S7 preferably) would be an added advantage.Be prepared to work overtime and be placed on standby when required.Be prepared to use their initiative and be able to complete tasks successfully and expeditiously with minimum supervision.Able to demonstrate good communication skills and be fully literate in English.Be a strong team player and have a passion to learn new things.Exposure to world class manufacturing techniques like Lean Manufacturing, TPM and Six Sigma would be an added advantage.Duties:Daily, Weekly, Monthly KPI’sMaintenance of machinery and plant as a whole and specific designated individual responsible area to ensure continued mechanical operation.To report to the Maintenance Manager any problems or faults and breakdowns occurring within the plant.To plan and discuss preventative maintenance with the Maintenance Manager.To comply with the standby schedule, safety requirements as prescribed by Company and any requirements of the OHS Act that are indicated as your responsibilities by the Maintenance Manager.Has the authority to stop any machine or practice that is unsafe, or not producing quality products – in consultation with either the supervisor, maintenance manager or factory manager.To develop and improve all aspects of the production lines technically.To correctly complete work orders issued to him or generated by him, and to return them to the Maintenance Manager. (E.g. the fabrication of machinery / safety guards according to drawings, refurbishing machinery and moving parts, attending to breakdowns.To furnish the Maintenance Storeman by writing in the order book and signing it with all relevant information to allow him to accurately order any spares or parts that may be required, and to follow up on progress.Complete all downtime reports as well as planned maintenance schedules for the allocated lines. This includes the planned shut down maint
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQ1MzA3X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1167404&xid=1266_45307
2y
1
Complement Recruitment are recruiting for a Qualified Boilermaker or Welder and A Qualified Millwright for permanent positions in Sedibeng, Gauteng.
MUST BE QUALIFIED TRADE TESTED RED SEAL ARTISANS
*Boilermaker/Welder*: Responsible for cutting and joining metals and other materials. Operate Appropriate equipment to put together mechanical structures or parts with a great deal of precision. Ensure that all maintenance operations are conducted within the quality, health and safety requirements of the company. This role reports directly into the Maintenance Manager. Salary market related depending on experience and industry skillset.
*Millwright: *
Maintenance of machinery and plant to ensure continued mechanical operation and performance within a Lean Manufacturing environment. Ensure that all maintenance operations are conducted within the quality, health and safety requirements of the company. This role reports directly into the Maintenance Manager. Salary market related depending on experience and industry skillset.
Check out Our Site Apply Directly for this Job by clicking here - (https://bit.ly/3LkgmiK)(https://bit.ly/3LkgmiK)
BOILERMAKER:
* Read blueprints and drawings and take or read measurements to plan layouts and procedures.
* Determine the appropriate welding equipment or method based on requirements.
* Set up components for welding according to specifications (e.g. cut material with powered saws, gas cutting equipment to match measurements).
* Operate angle grinders to prepare the parts that must be welded.
* Align components using calipers, rules etc. and clamp pieces.
* Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead).
* Repair machinery and other components by welding pieces and filling gaps.
* Test and inspect welded surfaces and structure to discover flaws.
* Maintain equipment in a condition that does not compromise safety
* Relationships: Factory Management, Safety and Quality Coordinator, Maintenance personnel and operators
MILLWRIGHT
* Maintenance of machinery and plant as a whole and specific designated individual responsible area to ensure continued mechanical operation.
* To report to the Maintenance Manager any problems or faults and breakdowns occurring within the plant.
* To plan and discuss preventative maintenance with the Maintenance Manager.
* To comply with the standby schedule, safety requirements as prescribed by Company and any requirements of the OHS Act that are indicated as your responsibilities by the Maintenance Manager.
* Has the authority to stop any machine or practice that is unsafe, or not producing quality products – in consultation with either the supervisor, maintenance manager or factory manager.
* To develop and improve all aspects of the production lines technically.
* To correctly complete work orders issued to him or generated by him,
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzE5NjUxX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1172425&xid=1555_19651
2y
1
Millwright Johannesburg Gauteng Purpose of Position: Complement Recruitment are recruiting for a Qualified Millwright for a permanent position in Sedibeng, Gauteng. The purpose of this position is Maintenance of machinery and plant to ensure continued mechanical operation andperformance within a Lean Manufacturing environment. Ensure that all maintenance operations are conducted within the quality, health and safety requirements of the company. This role reports directly into the Maintenance Manager. Salary market related depending on experience and industry skillset.Check out Our Site Apply Directly for this Job by clicking here - https://bit.ly/3LkgmiK Minimum Requirements :Matric (Standard 10) or recognized equivalent qualificationTrade Test Certification (Millwright)At least 5 (five) years working experience, a strong aptitude for electrical fault finding and trouble-shooting, experience in hydraulics and pneumatics, and be able to liaise effectively with suppliers for spares specifications and requirements.Located in Vanderbijlpark, Vereeniging or surrounding areas in the Sedibeng AreaGood working knowledge and experience in steel manufacturing, as well as a good understanding of PLCs and general programming (Siemens S5/S7 preferably) would be an added advantage.Be prepared to work overtime and be placed on standby when required.Be prepared to use their initiative and be able to complete tasks successfully and expeditiously with minimum supervision.Able to demonstrate good communication skills and be fully literate in English.Be a strong team player and have a passion to learn new things.Exposure to world class manufacturing techniques like Lean Manufacturing, TPM andSix Sigma would be an added advantage. Duties: Daily, Weekly, Monthly KPIs Maintenance of machinery and plant as a whole and specific designated individual responsible area to ensure continued mechanical operation.To report to the Maintenance Manager any problems or faults and breakdowns occurring within the plant.To plan and discuss preventative maintenance with the Maintenance Manager.To comply with the standby schedule, safety requirements as prescribed by Company and any requirements of the OHS Act that are indicated as your responsibilities by the Maintenance Manager.Has the authority to stop any machine or practice that is unsafe, or not producing quality products in consultation with either the supervisor, maintenance manager or factory manager.To develop and improve all aspects of the production lines technically.To correctly complete work orders issued to him or generated by him, and to return them to the Maintenance Manager. (E.g. the fabrication of machinery / safety guards according to drawings, refurbishing machinery and moving parts, attending to breakdowns.To fur
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzY3MTU0X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1166091&xid=1109_67154
2y
1
SavedSave
To oversee the manufacturing process of personal protective equipmentProduction plan for factory floor on daily basis, including key personnel and sales staffEstablish and monitor daily targetsManage and oversee all production according to production plan and delivery scheduleEnsure maximum efficiency by assessing operations and adjusting where necessaryOversee and manage machine operatorsOversee cutting room and outwork flowManage all production floor staff presently 18Oversee quality and control according to ISO 9001:2015Daily reporting to Management using excelOverseeing stock Management systemRequirements:Minimum 5 years experience with supervising clothing / PPE manufacturingExcellent understanding of production processes, lead times and deadlinesTechnical knowledge of sewing machines and operationsAbility to manage and improve efficiencies where possibleExperience with quality control using ISO 9001:2015Leadership and staff ManagementProblem solving and decision makingAbility to work under pressureExcellent communicationMust be able to use own initiative and have the ability to think out of the boxExcellent computer skills using excel is essential for reportingWorking hours 7am to 16:30 Monday to Thursday7am to 15:00 on FridayOne Saturday every month for overseeing stock plus weekends work required when necessary
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5Xzk2MjQ4X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1251039&xid=1109_96248
2y
1
SavedSave
Full-timeCompany DescriptionCompetitive PayDay 1 Benefits including: MedicalDentalVisionEmployer match 401KTuition ReimbursementCompany paid Life InsuranceCompany paid Retirement AccountCompany paid Short Term Disability / Long Term DisabilityTwelve paid Holidays each full calendar yearTwo weeks paid vacation in first yearFive personal days each full calendar yearThe Drive and Control Technology Division in North America develops internationally leading products, systems and services for machine tool and factory automation applications. Bosch Rexroth is the world leader in the drive, motion andcontrol technologies that power today’s most advanced manufacturing systems. We combine a passion for solving complex engineering challenges with unmatched applications expertise across a broad range of industries. Our proven machine and automation products equip you to operate platforms engineered to the highest levels of energy efficiency, productivity, flexibility and long-term value.Job DescriptionUtilize SAP determine items to be ordered, generate purchase requisitions and production orders, as well as following up on all changes that are proposed by the system.Constantly optimize material master data and other settings to obtain highest efficiency in acknowledging orders, producing orders, managing inventory and shipping material to meet customer demands.Monitor, analyze and improve key performance indicators for planning (e.g. delivery performance, inventory, costs).Lead continuous improvement efforts in the area of information flow between customer, sales and supplying plants to establish and improve the material supply chain and service level to the customer by applying lean principles.Increase automation of planning by applying industry 4.0 principles.Collaborate with appropriate areas to plan work center capacity requirements based on the order profile (customer requirements) and to schedule/release customer orders into the appropriate work center.Start and manage escalations with customers and suppliers to solve various types of supply chain issues.Run reports and analyze data for uncovering improvement potentials and determining root causesPerform other essential and related duties as may be assigned.QualificationsBachelor’s degree in Business Management, Supply Chain Management, Computer Science or similar discipline from an accredited institution (ex. CHEA) or High School diploma from an accredited institution with 5 years’ experience in Logistics Management, Supply Chain Management, Capacity Planning, Production Planning, Purchasing or similar discipline.MS Office familiarity and proficiency at using IT systems used in Logistics (e.g. ERP-systems like SAP, database software, data mining, MS SQL, Power BI, etc).Ability to effectively communicate and interface with international suppliers on a regular basis. This inc
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18yOTJfMjM1NTQxX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1165383&xid=292_235541
2y
1
SavedSave
This is a rare senior Production opportunity to join a high quality South African team, in an FMCG business whose products are distributed globally. This person will be based at their factory in the East Rand, Gauteng. This role is responsible for managing the throughput of the plant in its entirety.The successful candidate will have experience managing diverse teams with varying capabilities in a fast paced, technical production environment. Responsible for strategically and practically contributing to the overall continuous improvement of plant availability, and productivity, implement and maintain where necessary a best-in-class manufacturing and production operation as well as lead and contribute to projects identification, development and implementation. This is a “hands-on” role, and this person will spend the majority of her/his time in the factory ensuring efficiencies across the entire operation. A key aspect to this role is PACKAGING experience on the lines (technical experience of how the filler, capping and shrink-wrap), machines work, knowledge of bulk manufacturing and printing would be preferred. The candidate must have packaging production management experience of 8 years minimum in addition to his/her proven Production skills. Key areas:Contribute to improvements and expansion projectsIdentify performance improvement opportunitiesCollaborate with departments to roll out required improvement projectsCollaborate with departments to ensure the staff are dynamically resourced across lines. Lead a team developing excellence in line management and people engagementImplement and maintain where necessary a best-in-class manufacturing and production operation The ideal candidate should have:A university degree, preferably MECHANICAL or INDUSTRIAL ENGINEERINGMinimum of 8 years’ experience within the FMCG sector, in a packaging / production management roleProven track record in successful bulk manufacturing within FMCGStrong technical PACKAGING lines knowledge (filler, capping and shrink-wrap)You understand and accept that, by applying for this role, you authorise Candidate Connect to obtain your personal information and utilise said information for recruitment purposes for this role. Your information will be stored on our database. Should you wish for us to remove any personal information from our database, please contact us at info@candidateconnect.co.za. Your data will not be used for any unsolicited marketing purposes, and will not be transferred to any third parties without your direct consent. Please note that if you do not receive a response from us within 2 weeks of your application, please consider it as unsuccessful for this particular role – thank you.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18yOTJfMjMwNDY5X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1165308&xid=292_230469
2y
1
SavedSave
Head of ProductionThis is a rare senior Production opportunity to join a high quality South African team, in an FMCG business whose products are distributed globally. This person will be based at their factory in the East Rand, Gauteng. This role is responsible for managing the throughput of the plant in its entirety.The successful candidate will have experience managing diverse teams with varying capabilities in a fast paced, technical production environment. Responsible for strategically and practically contributing to the overall continuous improvement of plant availability, and productivity, implement and maintain where necessary a best-in-class manufacturing and production operation as well as lead and contribute to projects identification, development and implementation. This is a “hands-on” role, and this person will spend the majority of her/his time in the factory ensuring efficiencies across the entire operation. A key aspect to this role is PACKAGING experience on the lines (technical experience of how the filler, capping and shrink-wrap), machines work, knowledge of bulk manufacturing and printing would be preferred. The candidate must have packaging production management experience of 8 years minimum in addition to his/her proven Production skills. Key areas:Contribute to improvements and expansion projectsIdentify performance improvement opportunitiesCollaborate with departments to roll out required improvement projectsCollaborate with departments to ensure the staff are dynamically resourced across lines. Lead a team developing excellence in line management and people engagementImplement and maintain where necessary a best-in-class manufacturing and production operation The ideal candidate should have:A university degree, preferably MECHANICAL or INDUSTRIAL ENGINEERINGMinimum of 8 years’ experience within the FMCG sector, in a packaging / production management roleProven track record in successful bulk manufacturing within FMCGStrong technical PACKAGING lines knowledge (filler, capping and shrink-wrap)You understand and accept that, by applying for this role, you authorise Candidate Connect to obtain your personal information and utilise said information for recruitment purposes for this role. Your information will be stored on our database. Should you wish for us to remove any personal information from our database, please contact us at info@candidateconnect.co.za. Your data will not be used for any unsolicited marketing purposes, and will not be transferred to any third parties without your direct consent. Please note that if you do not receive a response from us within 2 weeks of your application, please consider it as unsuccessful for this particular role – thank you.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQ4OTAxX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1185412&xid=1266_48901
2y
Save this search and get notified
when new items are posted!
