Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Results for Manufacturing Jobs in Goodwood
Under general supervision, the Beam Saw Operator is
primarily responsible for the set up and operation of the CNC Beam Saw.
ESSENTIAL DUTIES AND RESPONSIBLITIES (duties include but are
not limited to:
Loads or unloads materials from machine
Inspects machinery or equipment to determine adjustments to
machine
Reads and interprets shop drawings
Verifies accuracy of machined work pieces against blueprints
or drawings
Ensures that work order specifications are followed
according to established schedule
Inspects and measures workpieces to mark for cuts and to
verify the accuracy of cuts
Troubleshoots saw for problems and makes proper adjustments
Follows all safety and OSHA standards and ensures a safe
working environment
Attends departmental meetings as required
Performs other duties as assigned or required
REQUIRED EDUCATION AND EXPERIENCE:
High school diploma or equivalent
Previous experience in woodworking industry a plusForklift License Advantageous3 Years experience requiredPlease send your detailed CV to roux@codesigns.co.za
1mo
A well established office furniture manufacturer is looking for a skilled wood CNC machine operator.Essential Duties & Responsibilities Include:
Establishes and sets controls to regulate factors such as
speed, feed, and depth and angle of cut according to established guidelines and
procedures.
Evaluate and validate CNC tools and paths for each component
part and be able to adjust parameters if needed.
Properly install, calibrate and test machine tooling.
Properly load raw materials and/or parts onto machines.
Starts and observes machine operation for malfunctions or
out-of-tolerance machining.
Verifies conformance of finished workpiece to specifications
using measuring and inspection tools.
Performs routine maintenance tasks on machines as required
to ensure functionality.
Confers with engineers, production personnel, programmers,
or others to resolve machining or assembly problems.
Maintain a clean and organized work area and maintain all
equipment in like-new appearance, according to maintenance plans and
established procedures.
Perform duties in accordance with the production schedule
within allotted budgets.
Capacity to handle multiple priorities with a high degree of
accuracy, attention to detail and urgency.
Interpret complex drawings, apply knowledge to solutions and
incorporate changes when deemed necessary.
Perform other duties assigned by supervisor.This position requires 3 years of experience.You can send your full CV with references to roux@codesigns.co.za
1mo
2
Job Position: Technical Production Foreman -mechanical / welding / maintenance
Ref: 4106
Location: Cape Town (Northern area – Blackheath)
Salary: commensurate with experience
Email your updated CV to recruit@onlinepersonnel.co.za
URGENT APPOINTMENT – MUST BE AVAILABLE TO START IMMEDIATELY
Qualifications / Requirements:
• Minimum of Matric
• Proven competence in managing and motivating a production workforce
• Valid drivers license
• Technical qualification such as in Welding / Boilermaking or equivalent
• Staff management experience
• Minimum of 3 years experience from either one of the following industries - Maintenance, Technical, Production, Boiler making, Mechanical or Manufacturing
• Ability to speak, read and write Afrikaans and / or English
Key Performance Areas:
• The Production Foreman will take complete responsibility for production within the company
• Managing and controlling the production processes and output
• Ensuring that production volumes, quality standards, and cost targets are achieved
• Driving the implementation of processes for new products
• Oversee the management and control of the production store function
• Planning, budgeting, costing and capex responsibilities
• To manage, direct and monitor the performance of subordinates to ensure that critical performance areas and targets are achieved
Responsibility:Email your updated CV to recruit@onlinepersonnel.co.za
URGENT APPOINTMENT – MUST BE AVAILABLE TO START IMMEDIATELY
Qualifications / Requirements:
• Minimum of Matric
• Proven competence in managing and motivating a production workforce
• Valid drivers license
• Technical qualification such as in Welding / Boilermaking or equivalent
• Staff management experience
• Minimum of 3 years experience from either one of the following industries - Maintenance, Technical, Production, Boiler making, Mechanical or Manufacturing
• Ability to speak, read and write Afrikaans and / or English
Key Performance Areas:
• The Production Foreman will take complete responsibility for production within the company
• Managing and controlling the production processes and output
• Ensuring that production volumes, quality standards, and cost targets are achieved
• Driving the implementation of processes for new products
• Oversee the management and control of the production store function
• Planning, budgeting, costing and capex responsibilities
• To manage, direct and monitor the performance of subordinates to ensure that critical performance areas and targets are achieved
Job Reference #: TechnicalProductionForeman
1y
Ads in other locations
1
The area of expertise for our client is creating and designing displays for the retail industry. They are searching for motivated and passionate Assemblers to join their team.
Minimum Requirements
• Matric (certificate will be requested)
• Minimum of 2 years’ experience in a similar position
• Experience in the Manufacturing / Engineering sector
• Ability to use tools (e.g., clamps) and machines (e.g., presses)
• Excellent hand-eye coordination and physical condition
• Bilingual (Afrikaans and English)
• Forklift License (beneficial)
Responsibilities:
• Maintains equipment and conveyors and performs basic repairs when needed
• Performs other related duties as assigned
• Read and comprehend instructions and follow established procedures
• Responsible for assembling materials using hands or tools
• Responsible for following assembly guidelines
• Inventory and manage all stock products within a warehousing environment
• Uses various machines and hand tools to accomplish assigned tasks
• Keeping a clean and tidy workspace
• Meeting all safety requirements of the company and industry
• Assembles machinery, fabricated metal products, electrical equipment, appliances, and more according to directions
• Reads blueprints, schematics, or similar documentation, then builds to those specifications
• Take precision measurements to ensure perfect fit of components
• Align material and put together parts to build more complex units
• Check output to ensure highest quality
• Maintains logs, records, and reports concerning production, machine maintenance, and product inconsistencies
• Report on issues, malfunction, or defective parts
HOW TO APPLY: Send your CV and all documents to liza-nelle@personastaff.co.za or phone 021 975 8297 for more information.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.Job Reference #: AssemblerConsultant Name: Liza-Nelle Swanepoel
20min
2
We are looking for an experience material cutter to join our dynamic team. Must have experience in marking and cutting of industrial fabrics, Be able to work with heavy fabrics, work well under pressure and communicate well in a team.
2d
1
Furniture manufacturing company in Montague Gardens requires the skills of a
driver / cabinet maker with a valid driver’s licence. The Candidate would be
required to work in all the other areas of the factory. Assembly of furniture,
cleaning, loading and delivery of furniture etc.
Send a short CV to admin@aheadoffice.co.za
4d
1
CNC Operator / Bending Operator
Our client is based in Brackenfell and they are seeking to employ CNC Operators / Bending Operators.
Do you have a matric certificate and at least two years CNC / Bending Operators working experience?
STRICT REQUIREMENTS:
• Completed Grade 12 / Matric Certificate (certificate will be requested).
• Milling and lathing experience will be an advantage.
• CNC Operating experience (Min 2 Years)
• Mic, Micrometers, size experience is a MUST.
• Must be hardworking and dedicated.
• Clean criminal record.
Apply: Send your UPDATED CV (including all work experience) to megan@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
Consultant Name: Megan Ockhuis
6d
1
Stores Assistant
Our client is based in Brackenfell and they are seeking to employ Storeman. The ideal candidate must be diligent, have the ability to work independently and have previous relevant experience.
Requirements:
• Matric Certificate / Grade 12.
• Receiving and dispatching of stock.
• Warehouse and stores notes and reports.
• Computer Literate.
• Communications skills – English and Afrikaans.
To apply, please send your CV and salary expectations to megan@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
Consultant Name: Megan Ockhuis
6d
1
Our client, based in Stikland, is seeking to employ Assistant Operators for a project (Contract position) that is available immediately.
If you have a Matric certificate with at least one year working experience and are willing to work 12-hour shifts that include nightshifts and weekends then contact me today!
STRICT REQUIREMENTS:
• Completed Grade 12 / Matric Certificate (certificate will be requested).
• Machine operating experience.
• Welding experience (Advantageous)
• Forklift license is beneficial.
• Must be hardworking and dedicated.
• Ability and willingness to work 12-hour shifts, including nightshifts and weekends.
• Clean criminal record.
HOW TO APPLY: Send your CV and all documents to liza-nelle@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Salary: R59 p/hJob Reference #: A/OPConsultant Name: Liza-Nelle Swanepoel
8d
1
Our client within the Manufacturing industry, based in Brackenfell, is seeking to employ an experienced Bending Operator who is available immediately.
Requirements:
• Matric Certificate
• Proven experience as a Bending Operator or similar role
• Proficiency in reading technical drawings and blueprints
• Familiarity with various bending machinery and equipment
• Strong attention to detail and commitment to producing high-quality results
• Ability to work in a fast-paced environment and meet production deadlines
• Good communication and teamwork skills
Key Responsibilities:
• Operate bending machinery to shape materials according to precise specifications
• Read and interpret technical drawings and blueprints to ensure accurate bending processes (beneficial)
• Conduct quality checks to guarantee the precision and consistency of the bent materials
• Collaborate with the production team to meet project deadlines and targets
• Perform routine maintenance on bending machines to ensure optimal functionality
HOW TO APPLY: Send your CV and all documents to liza-nelle@personastaff.co.za or phone 021 975 8297 for more information.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.Job Reference #: B/OConsultant Name: Liza-Nelle Swanepoel
8d
Seeking a all round machinist , put in zips, button holes, button soles and work on golfer t shirts atleast min 2 years experience will be tested on samplesplease contact Gertrude 0836722617 do not contact the number on the add
9d
Job descriptionDuties:Operating and setting of a Fanuc bridge milling machine.Previous CAM experience essential.Programming using Mastercam would be advantageous.Complete QC checks on parts throughout the shift.Maintain good housekeeping.Daily machine maintenance.Competencies:Good planning and organising skills, with regards to daily job planning, tools and equipment preparation and checking of information (correct drawing revision number, queries of any confusing information or instructions prior to machining).Attention to detail, meticulous and accurate.Decisiveness and ability to initiate action.Good understanding and adherence to principles, values, instructions and procedures.Ability to work effectively with people.Coping with pressures and setbacks.Must be able to do repetitive work without losing focus and making mistakes.Job Qualification & Experience -Preferred Requirements:3-5 years of CNC milling experience is a requirementKnowledge Fanuc operating systems..Must be able to read and interpret technical drawings, especially tolerances and surface finishes.Own transport is a requirementWilling to work long hours/ nightshift rotation.Job Type: Full-timeExperience:CNC Turning: 3 years (Required)Ability to Commute:Bellville South, Western Cape (Required)Email Copy of CV and ID to recruitment@sppsa.co.za Subject: REF:CNC001
9d
2 - 3 years
of hands-on carpentry experience
Great hand
dexterity and an eye for detail
Excellent
understanding of carpentry techniques and methods of installation and
construction
Proficient
in using electrical and manual equipment and measurement tools (powered saws,
hammers, rulers, etc.)
Ability to
read and understand technical documents and drawings
Must follow
safety guidelines at all times
Good
knowledge of English
Good
physical condition and endurance
Ability to
work evenings, weekends, and holidays if needed.
Job Type:
Full-time and Part-timePlease email your CV to: jobs@supersonicafrica.co.za
9d
1
Assistant Operator
Our client is based in Stikland and they are seeking to employ Assistant Operator. Do you have a matric certificate and at least one year’s manufacturing experience?
Are you willing and able to work 12-hour shifts that include nightshifts and weekends?
STRICT REQUIREMENTS:
• Completed Grade 12 / Matric Certificate (certificate will be requested).
• Machine operating experience.
• Must be hardworking and dedicated.
• Ability and willingness to work 12-hour shifts, including nightshifts and weekends.
• Clean criminal record.
AREA: Stikland (Transport will be own responsibility)
PAY RATE: R59 per hour
APPLY: Send your CV and all documents to megan@personastaff.co.za or phone 021975 8297 for more information.
Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
Consultant Name: Megan Ockhuis
10d
1
Assembler (Electrical)
Our client, located in the Northern Suburbs, is seeking an assembler with some electrical experience to join their team.
If you are available immediately, then contact us today.
REQUIREMENTS:
• Grade 12 / Senior Certificate
• Minimum 1 years working experience in a similar role
• Experience with assembling Cupboards, steel components, tables, cabinets and displays.
• Experience with assembling electrical components (lights, ovens etc.)
AREA: Brackenfell (Transport is your own responsibility)
PAY RATE: R45 p/h
HOW TO APPLY: Send your CV and all documents to megan@personastaff.co.za or phone 021 975 8297 for more information.Consultant Name: Megan Ockhuis
10d
1
Assembler
Our client, located in the Northern Suburbs, is seeking an assembler with some Electrical, HVAC, Aircon or Refrigeration experience to join their team.
If you are available immediately, then contact us today.
REQUIREMENTS:
• Grade 12 / Senior Certificate
• Minimum 1 years working experience in a similar role
• Experience with assembling Cupboards, steel components, tables, cabinets and displays.
• Experience with assembling electrical components (lights, ovens etc.) or HVAC, Aircon or Refrigeration.
AREA: Brackenfell (Transport is your own responsibility)
HOW TO APPLY: Send your CV and all documents to megan@personastaff.co.za or phone 021 975 8297 for more information.Consultant Name: Megan Ockhuis
10d
1
A semi-skilled carpenter with experience in assembling / carpentry work is needed by our client, who is located in the Northern suburbs.
If you are available immediately, then contact us today!
REQUIREMENTS:
• Grade 12 / Senior Certificate
• Minimum 1 years working experience in a similar role
• Able to travel to Brackenfell
• Cupboards, steel, tables, chairs and welding
HOW TO APPLY: Send your CV and all documents to liza-nelle@personastaff.co.za or phone 021 975 8297 for more information.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.Job Reference #: Semi-CarpConsultant Name: Liza-Nelle Swanepoel
13d
Machine OperatorWe require young, energetic applicants who are eager to learn and grow with us. Please only send CV's if you have minimum 2 years experience as an operator in the manufacturing industry.Send CV's to revocandy@gmail.com
16d
Manufacturing company for retail branding solutions, signmaking, Perspex fabrication, metal fabrication,custom furniture,etc, aswell as Vacforming.We design, make mould, form product (sign),cut, trim, finish (LEDs/backing) and assemble complete sign/product to clients specifications.Machine bed size 2,3x1,3m,forms from small to large moulding, positive) negative in various materials, gauges, colours, vinyl, printed,etc.For faster service, you can supply own mould, material,etc. or otherwise.We also specialise in CNC work, printing, embroidery, outdoor signs,car branding, lightboxes,banners,flags, signage, posters, canvas frames, gazebo, etc.for more information ph 0657137957 or WhatsApp 0676959450 or email davidaugus563@gmail.com for latest projects or enquiries, thank you David,God Bless.Please note my location is Parow, Cape town, thanks David
8d
Servmat is a sheet metal service centre in Parow Industria. We are looking for laser operators and a press brake operator with relevant experience. Please send your CV to cncbend@servmat.co.za, or contact Herbert at 021-933 3153 (w) or whatsapp at 082 922 7596.
17d
Save this search and get notified
when new items are posted!