Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Results for Engineering & Architecture jobs in Jeffreys Bay
1
SavedSave
Our client, a company involved in the construction
and solar industry is urgently seeking the expertise of an experienced Team
Lead Installation Electrician to join their team in the Kouga Area, Eastern
Cape.
Responsibilities (not limited to):Electrical worksSeparating essential and non-essential
consumersFacilitate the electrical installation
process by reading drawings and implementing electrical designs.Carrying out inspections on electrical
components, such as transformers and circuit breakers Training and
directing workers to install, maintain, and/or repair electrical wiring equipment
Installing electrical apparatus, equipment, and fixtures.Ensure the necessary material and/or
equipment is available for the duration of the construction phase. Creating material listsReviewing construction drawings and
technical diagrams.Overseeing the installation and
maintenance of wiring, control, and lighting systems Troubleshooting
electrical issues with the appropriate utilization of relevant testing
devices Complying strictly with National Electrical Code and local
building regulations.
Solar PV electrical installationsGrid tied inverter
installations with integration to the incoming supply.Battery backup
installations with integrated PV either full or partial backupCommissioning of systemsSetting up of internet
monitoringInstallation of monitoring systemsSolar system maintenancePre-emptive maintenance
inspectionsCallouts from client
Management of Installation TeamsManagement of Teams and
subcontractors including but not limited to:Safety File ManagementToolbox talksGuiding and training of
Installation staffMonthly Toolbox inspectionEnsuring Job cards are
completed accurately and timeouslyEnsuring installations run
smoothly and completed in the allocated timeWorking closely with PM
for Calendar planningConducting pre
installation site visitsChecking material lists
pre installationProviding feedback to
Management to implement better processesEnsuring that all
installation works are Electrically and OHS compliant and issuing COC’sEnsuring that teams are
briefed correctly
Diverse tasksReview and update material
listsUpdate project progress
lists such as Monday’s/ teams/ similar systemTeam communication via relevant
channel
Requirements:
Applicable NQF level qualification for
ElectriciansWireman’s licence, mandatoryCertified Installation ElectricianCOC testing and sign-off single phase –
mandatoryValid Drivers LicenseBenefits: Salary: Area
Market related salary Construction Electricians - negotiablekouga.hr@gmail.com - We will contact you in 3 days should
you be suitable for this vacancy.
11d
Ads in other locations
1
*Reference: PE000790-MVDM-1*
Our client is seeking a Sheet Metal Fabricator to join their team.
Open position : Sheet Metal Fabricator
Location : Port Elizabeth
Salary : Market related
Type : Contract position
Job requirements :
* Relevant mechanical engineering qualification beneficial
* Previous work experience as a metal fabricator.
* Certification and advanced welding experience.
* Advanced knowledge of engineering design and manufacturing procedures.
* Ability to read and interpret technical drawings.
* Proficiency with metal fabrication tools including shears, rollers, and drill presses.
* Advanced mathematical and engineering skills.
* Ability to lift and manipulate large metal objects.
Duties :
* Reading and interpreting drawings
* Constructing base templates if necessary.
* Measuring and marking out cutting and bending lines.
* Setting up metalwork machinery including rollers, drill presses, brakes, and shears.
* Double-checking design specifications before commencing with cutting work.
* Fabricating and constructing metal components.
* Grinding and finishing completed products.
* Performing quality checks on completed products.
* Conforming with state and company safety regulations.
* Completing job reports.
Should you meet the above job requirements, please email your CV to (jason@zwanda.co.za)(mailto:jason@zwanda.co.za)
Please add “Sheet Metal Fabricator” to the subject line of your email.
No reply after 2 weeks indicates that you have been unsuccessful.
R
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzU0MjMxX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1241612&xid=1555_54231
2y
1
SavedSave
Reference: JC52256
Our client who specializes in automotive components is seeking a fitter and turner within the Port Elizabeth region
Duties include, but are not limited to:
* Must run a shift on his own.
* Must work shifts and overtime as required
* Assist the EMSEC GOLDWING in maintaining machine safety and meet deadline as required
* Do fault finding and repairs on machines.
* Ensure that TPM2 are done correctly and on time.
* Must be competent in hydraulics and pneumatics.
* Be able to do minor welding repairs.
* Be actively involve with continuous improvement of machinery.
* Be involved with apprentice training.
* Be able to do pipe fitting.
* Assist with projects.
* Must be able to work under minimum supervision.
* Ensure that minimum stock levels on critical spares are kept intact.
* Be able to do minor machining. (milling, grinding, turning)
* Be involve with machine upgrades.
Position requirements as follows:
* Education/Experience:
Trade tested artisan (Fitter Trade) with at least 5 years related experience in areas such as Preventative maintenance, machine breakdowns and safety systems. Must have a sound working knowledge of Hydraulics and Pneumatics.
* Reasoning Ability:
Ability to work as a team member, under pressure with good organizational skills and problem-solving capabilities.
* Computer Skills:
To perform this job successfully, an individual should be computer literate in MS Word and MS Excel.
Position requirements as follows:
* Education/Experience:
Trade tested artisan (Fitter Trade) with at least 5 years related experience in areas such as Preventative maintenance, machine breakdowns and safety systems. Must have a sound working knowledge of Hydraulics and Pneumatics.
* Reasoning Ability:
Ability to work as a team member, under pressure with good organizational skills and problem-solving capabilities.
* Computer Skills:
To perform this job successfully, an individual should be computer literate in MS Word and MS Excel.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI1MTY1X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1187491&xid=1555_25165
2y
1
SavedSave
Job Advertisement: Financial Manager with Foundry Experience
Are you an experienced financial manager with a background in foundry operations? Are you ready to take your financial expertise to the next level and drive growth in a dynamic environment? We are seeking a highly qualified and visionary individual to join our team as a Financial Manager.
Key Qualifications:
- A degree in Finance and (a higher degree is a plus)
- Extensive experience in foundry operations
- Energetic, vibrant, and proactive attitude
- Willingness to take on challenging workloads
- Strong analytical and decision-making skills
- Exceptional attention to detail
Responsibilities:
As the Financial Manager, your role will be instrumental in overseeing our financial operations and contributing to our growth. You will be responsible for:
- Financial Oversight: Ensure efficient financial management, cost control, and budgeting to maximize profitability.
- Operational Analysis: Regularly review foundry operations, particularly mold costs, and identify any discrepancies compared to previous months. Promptly report any cost increases and suggest strategies to revert to previous cost levels.
- Cost Savings: Identify opportunities for cost savings and operational improvements across the business.
- Strategic Input: Collaborate with senior management to develop and implement financial strategies that align with our business goals.
- Team Leadership: Lead and mentor a team of financial professionals, fostering a culture of growth and development.
Career Growth:
This position offers the opportunity for rapid career growth, with the potential to advance to a director-level role as our business continues to expand. We are looking for a candidate who can grow with us and become an integral part of our leadership team.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yMTI0NjMwMTY2P3NvdXJjZT1ndW10cmVl&jid=1746057&xid=2124630166
19h
1
We are looking to employ ,mentor and train a young mechanical engineering graduate.
REQUIREMENTS
Degree or Diploma in Mechanical Engineering
Under the age of 27.
Two years prior working experience as an intern in the OEM or Component Manufacturing Industry
Strong technical affinity to mould design and manufacturing bringing the component into production.
Mentorship directly under the Plant Director.
Preference given to a AA candidate
Please send your CV to info@mcrecruit.co.za Salary: R28 000 Cost to Company Consultant Name: Skye Cotterell
20h
1
SavedSave
We are seeking a Component Industry Plant Manager reporting to the MD.
REQUIREMENTS
Mechanical Engineering Degree or Diploma
15 years of Manufacturing experience in the Mobility Industry - Cars,Trucks,Components,Yellow Metal of which 8 should be as a Plant Manager
Responsible for Design and Production of a Plant doing a Turnover of R 400 million per annum.
Tier 1 or 2 component or OEM experience.
Please send your CV to info@mcrecruit.co.za Salary: R120 000 Cost to Company Consultant Name: Mike Cotterell
20h
1
SavedSave
*Reference: PE000780-NV-1*
Our client is seeking a Spares Coordinator to join their team.
Open position: Spares Coordinator
Location: Port Elizabeth
Salary: Market Related
Type: Permanent
Reports to: Management
Job Requirements:
* Minimum of Matric
* 3 – 5 years’ experience in Administration Work and Stock Control
* MS Office – Sound knowledge of Excel
* Able to oversee a team (main requirement)
* SAP Experience essential or equivalent ERP System
* Accounting background advantageous
* Knowledge in the use of shipping and courier services would be advantageous
Duties:
* Preparation of quotes
* Loading of Sales Order when Customer PO is received
* Co-ordinating of supply of spares to internal and external customers.
* Creating Invoicing / Delivery Notes for Customers and e-mailing said Invoices
* Filing, Scanning & Uploads to SAP
* Dealing with Queries from Customers
* Arrange collections for Local and International Shipments.
* Following up on deliveries that are late
* Ensure Delivery POD is received and uploaded to SAP, after being scanned in
* Assisting Finance with outstanding payments
* Assisting External & Internal Auditors with request in-regards to Spares Department
* Monthly Stock Take
* Issuing Stock to Projects
* Booking in and out of Stock for various reasons
* Year-end Stock Take with External Auditors & Internal Auditors
* Writing off of obsolete stock
* Improve processes where necessary
Should you meet the above job requirements please email CV to (nanette@kingrec.co.za)(mailto:nanette@kingrec.co.za)
Please add “Spares Coordinator” into the subject line of your email.
No reply after 2 weeks indicates that you have been unsuccessful.
R
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzUxMDA5X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1236726&xid=1555_51009
2y
1
a Company in Port Elizabeth is looking for a suitable person for a position vacant of Injection Moulding Tooling Engineer.
The requirements are minimum of 5 years experience in plastic injection mould tool design, development and implementation. Salary is around R42k - R50k basic plus benefits.
To work with IM Engineers to resolve issues, work with Tool room on Tool improvements, do Mould Flow Analysis and sit in when new tools are designed and reviewed with Product Development. Provide feedback to Management.
Minimum of Five years experience in plastic injection mould tool design, development and implementation
Mechanical/ Technical Diploma/ Degree or equivalent experience in injection moulding
Toolmaker Trade tested with Ten years experience
Ability to use basic functions of Microsoft Excel, Word and PowerPoint
Mould Flow Analysis and software experience
Design software experience
Automotive injection mould tooling experience
Injection moulding process and equipment knowledge and experience
Working knowledge of pneumatics, hydraulics and equipment design
R42-R50k basic plus benefits
Minimum of Five years experience in plastic injection mould tool design, development and implementation
Mechanical/ Technical Diploma/ Degree or equivalent experience in injection moulding
Toolmaker Trade tested with Ten years experience
Ability to use basic functions of Microsoft Excel, Word and PowerPoint
Mould Flow Analysis and software experience
Design software experience
Automotive injection mould tooling experience
Injection moulding process and equipment knowledge and experience
Working knowledge of pneumatics, hydraulics and equipment design
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzQ0NDUzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1234090&xid=1555_44453
2y
1
SavedSave
*Reference: JHB000254-CC-1*
Leading engineering and mining supplier requires a Sales Engineer This position is based in Middelburg, Mpumalanga. Mineral processing industry experience is essential
Bachelor’s Degree or BTECH in Mechanical or Metallurgical Engineer
2-3 years related technical sales experience in minerals processing equipment and mining environment
The successful candidate will need to be energetic and have a passion for sales
They should be technically sound
Have the ability to promote and generate new business from existing customers
Grow the market share by providing value adding solutions to products and processes for our customers
High level of computer literacy using Microsoft Office suite
Increase sales of full range and increase process engineering services offered to customers making the branch a solutions provider
Proactive in seeking growth in all products
Always adhere to all Safety Health Environment (SHE) and housekeeping requirements at the branch and customer sites
R Monthly plus Medical Aid and Provident fund and Car Allowance
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzM2MDEzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1230917&xid=1555_36013
2y
1
SavedSave
*Reference: PE000773-NV-1*
Our client is seeking a Chassis Engineer to join our team
Open position: Chassis Engineer
Location: Uitenhage / Kariega
Salary: Market related
Type: Permanent
Strictly EE/AA position
Job Requirements:
* NDip Mechanical Engineering / BTech Mechanical Engineering / BSc Mechanical Engineering
* Minimum 5 years relative experience in the field.
* Knowledge of modern Chassis components and systems.
* Knowledge of modern automotive production methods.
* Knowledge of project management principles.
* Understanding of basic financial principles.
* Self-motivation, good time management, report writing and presentation ability.
* The ability to conduct Technical Presentations.
* The ability to work and communicate effectively with people at all levels.
* MS Office computer literacy.
* A working knowledge of the German language will be an advantage.
* Code 08 Drivers Licence.
Duties:
* Responsibility for the design, development and release of chassis components
* The resolution of design related problems on manufactured platforms (ability to problem solve complex components).
* Project management of components under your responsibility, ensuring that chassis components are timeously introduced into production within the specified time and cost parameters.
* Preparing technical feasibility studies, cost analysis of components, systems and projects.
* Creating and tracking development timing plans.
* Evaluation and implementation of the Group design changes.
* Maintenance of Technical Data Systems for chassis components.
* Assist with line and quality problems, special investigations, etc.
* Evaluation and implementation of Product cost optimisations
Should you meet the above job requirements please email your CV to (nanette@zwanda.co.za)(mailto:nanette@zwanda.co.za)
Please add “Buyer” into the subject line of your email.
No reply after 2 weeks indicates that you have been unsuccessful.
R
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzM5MjE3X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1231877&xid=1555_39217
2y
1
SavedSave
a Company in Port Elizabeth is looking for a suitable person for a position vacant of Injection Moulding Tooling Engineer.
The requirements are minimum of 5 years experience in plastic injection mould tool design, development and implementation. Salary is around R42k - R50k basic plus benefits.
To work with IM Engineers to resolve issues, work with Tool room on Tool improvements, do Mould Flow Analysis and sit in when new tools are designed and reviewed with Product Development. Provide feedback to Management.
Minimum of Five years experience in plastic injection mould tool design, development and implementation
Mechanical/ Technical Diploma/ Degree or equivalent experience in injection moulding
Toolmaker Trade tested with Ten years experience
Ability to use basic functions of Microsoft Excel, Word and PowerPoint
Mould Flow Analysis and software experience
Design software experience
Automotive injection mould tooling experience
Injection moulding process and equipment knowledge and experience
Working knowledge of pneumatics, hydraulics and equipment design
R42-R50k basic plus benefits
Minimum of Five years experience in plastic injection mould tool design, development and implementation
Mechanical/ Technical Diploma/ Degree or equivalent experience in injection moulding
Toolmaker Trade tested with Ten years experience
Ability to use basic functions of Microsoft Excel, Word and PowerPoint
Mould Flow Analysis and software experience
Design software experience
Automotive injection mould tooling experience
Injection moulding process and equipment knowledge and experience
Working knowledge of pneumatics, hydraulics and equipment design
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzM1Njk3X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1230784&xid=1555_35697
2y
1
SavedSave
*Reference: PE000770-NV-1*
Our client is seeking a Product Engineer to join our team.
Open position: Product Engineer
Location: Kariega
Salary: Market Related
Type: Permanent
Strictly EE/AA position
Job Requirements:
ESSENTIAL:
* National N Diploma /National Diploma in Mechanical Engineering/National Diploma in Operations Management.
* Have at least 3 years technical experience in the automotive industry and extensive knowledge of the vehicle production process
PREFERRED:
* Relevant Qualification in Mechanical Engineering
* A tool making trade
* German language proficiency
* Experience in (CATIA, CAD, Hyper KVS)
* Previous Body Shop / Vehicle dimensional experience
Skills, Attributes & Other requirements
* Be familiar with detailed technical drawings and fixture drawings
* Have proven analytical skills with an innovative approach to Problem Solving
* Be able to create detailed reports for distribution to relevant departments and Senior Management
* Have good communication skills (able to communicate at all levels, through presentations, verbal and in writing)
* Be willing to work overtime at short notice and willing to work shifts, be on call out/Standby.
* Be competent in Microsoft Packages (e.g. Excel and PowerPoint
DUTIES:
* Assisting supporting departments in pre-series build
* Supporting launch team with facility introduction and achieving all the Group standard quality milestones.
* Series Production, Investigate all vehicle non-conformities (Root cause analysis, containment and implementation of corrective actions).
* Assisting Process Engineer and Cross Functional Team leader to define and implement process and facility improvements
* Providing feedback in Management Reviews (Written and Verbal)
* Managing of problem sheets (Creating, Follow up and Closure )
* Ensuring Stability of assemblies. Liaise with other departments to ensure (Parts, Facilities and Process)
Should you meet the above job requirements please email your CV to (nanette@zwanda.co.za)(mailto:nanette@zwanda.co.za)
Please add “Product Engineer” into the subject line of your email.
No reply after 2 weeks indicates that you have been unsuccessful.
R
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzM2NjM3X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1231167&xid=1555_36637
2y
1
SavedSave
Responsible for developing and implementing process strategies
Managing process resources
Optimizing current processes and updating engineering documentation (Process Flow, FMEA, Control plan, SWI).
* *Must be able to work as part of an industrial process, project engineering and technical services team to think creatively in solving equipment, project and production manufacturing problems*
* Relevant Engineering qualification or a relevant trade tested qualification
* Two-Five years’ relevant experience in an Automotive Manufacturing Environment
* Mitsubishi PLC, Motoman Yaskawa Spray Robotics, HVAC Clean Room Systems, Krauss Maffei Injection Moulding, BMC technology
* Jig design for technical services, paint processes and new projects
* Vacuum Plating Technology
* Auto Cad and Project Management experience is advantages
* Relevant Engineering qualification or a relevant trade tested qualification
* Two-Five years’ relevant experience in an Automotive Manufacturing Environment
* Mitsubishi PLC, Motoman Yaskawa Spray Robotics, HVAC Clean Room Systems, Krauss Maffei Injection Moulding, BMC technology
* Jig design for technical services, paint processes and new projects
* Vacuum Plating Technology
* Auto Cad and Project Management experience is advantages
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzQ0NDQ4X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1229990&xid=1555_44448
2y
1
Our client is seeking a Senior Manager - Industrial Development to join their team, based in East London to lead and promote the industrial development of various sectors in the Eastern Cape. Minimum Requirements:- *Post Graduate Qualification in Commerce or Engineering *10+ Years working experience with at least 5 years at a role relevant to Industrialisation Agro-processing or Manufacturing as a Senior Manager or Consultant
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQ4NzAwX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1184070&xid=1266_48700
2y
1
SavedSave
One of our clients in Uitenhage, Eastern Cape is looking for a Reliability Specialist to join their successful team. If you are a pro-active person and have strong customer focus, then this is the perfect opportunity for you.Requirements include:N6 or National Diploma in Engineering/NGF equivalent5+ years of manufacturing experience in maintenance and/or engineering2+ years experience of planning maintenance activities
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQ3MjM3X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1177923&xid=1266_47237
2y
1
Middelburg - Our client is a mineral processing company providing solutions for the recovery of ultra-fine minerals, operating in Projects and Engineering services, Operations Management and Process Equipment. Currently, they have an opportunity Procurement, Quality and Expediting Engineer to join their team within the mining process industry.Purpose of Role:Taking lead with technical procurement in accordance with client-specific standards.Taking the lead in terms of quality on all disciplinesExpediting of procured equipment Job Experience:BEng / BSc in Electrical / Mechatronics / Metallurgical / Mechanical / IndustrialSkills Required:Technical project procurement for equipment and instrumentation requiredConducting quality controlExpediting of procured equipment, managing OEM project schedules and ensure timeous delivery of goodsManage OEM contracts – including negotiations and management of order placedGenerating of contracts with OEMEnsure engineering design integration is done in terms of procured equipment with design officeManage income & expenditure of the projectManage installation and commissioning of all designs and systemsSetting up of meetings with relevant stakeholders and compiling reports
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQ5MDg5X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1185554&xid=1266_49089
2y
1
SavedSave
Our client is seeking a Project Engineer to join their team.Open position : Project Engineer (MPE)Location : UitenhageSalary : Market relatedType : Permanent positionJob requirements :National Diploma or Degree in Mechanical/Mechatronic EngineeringMinimum 3-5 years project management experience including specifications, competitive tenders, project management and legal compliance in a manufacturing environment.Ability to manage projects and interface with a diverse team from various departmentsAbility to read and interpret technical drawingsHave strong MS Office skills (Word, Excel, PowerPoint, MS Project)Organizing, coordinating, planning as well as resourcefulness skillsAbility to deal with complex tasksGood people skills and an ability to communicate effectively at all levelsProven analytical skills with an innovative approach to problem-solvingAbility to work independently and be self-motivated to achieve targetsHave initiative and be able to work under pressure Duties :Planning, procuring & introducing (project management) new / upgrades to facilities incorporating.Preparing investment studies and options for possible new facilities / product by developing specification for the installation of Systems / Facilities / Equipment and Buildings / Civils.Preparing and presenting approval documentation for new facilities / product including technical evaluation of tenders.Overseeing project implementation by establishing sites, managing change points, coordinating stakeholders during construction, commissioning, Budget and Timing adherence.Tracking actual expenditure versus budget, progress payments and final payment.Updating layouts for projects and submitting to HLS layout specialist.Buy-off of new equipment with Final Acceptance Schedule (end of commissioning).Ensuring suppliers provide documentation for facility (operating manuals, maintenance manuals, drawings etc.)Asset tagging Please add “Project Engineer” to the subject line of your email
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzUzODc2X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1202170&xid=1266_53876
2y
1
SavedSave
SJ04
*Key Performance Areas would include, but are not limited to:*
* Repairs and maintenance to machinery and equipment in line with prescribed regulations and standards;
* Regular inspections, fault finding and preventative maintenance jobs;
* Innovation and business improvements in support of operational and segment goals;
* Implemented initiatives of business plans;
* Turning, milling, welding and fitting for fabrication of components;
* Participate in the mini-business activities (E²);
* Adhering to relevant health, risk & safety regulations and quality standards.
*The successful candidate must preferably have the following experience/skills:*
* N3 equivalent Mechanical qualification (NQF 4), Mechanical Trade (Fitter/ Turner/ Millwright)
* 2 years experience in a Manufacturing environment
* N4 – N6 Technical qualification will be advantageous
* Experience in an FMCG environment will be advantageous
* Working experience with high speed bottling machinery a distinct advantage
* Labelling experience advantageous
* Ability to work accurately and according to precise measurements and specifications
* Competent in turning, milling, argon and arc welding
* Competent in pneumatics and hydraulics
* Reflect good leadership behaviour - towards colleagues, superior and company values
* Able to do in depth problem solving and fault finding
* Able to cope with the inherent physical demands of the position
* Able to work shifts, on weekends and flexible hours
* Have reliable transport to and from work
*Qualification required:*
* N3 equivalent Mechanical qualification (NQF 4), Mechanical Trade (Fitter/ Turner/ Millwright)
Market Related
*The successful candidate must preferably have the following experience/skills:*
* N3 equivalent Mechanical qualification (NQF 4), Mechanical Trade (Fitter/ Turner/ Millwright)
* 2 years experience in a Manufacturing environment
* N4 – N6 Technical qualification will be advantageous
* Experience in an FMCG environment will be advantageous
* Working experience with high speed bottling machinery a distinct advantage
* Labelling experience advantageous
* Ability to work accurately and according to precise measurements and specifications
* Competent in turning, milling, argon and arc welding
* Competent in pneumatics and hydraulics
* Reflect good leadership behaviour - towards colleagues, superior and company values
* Able to do in depth problem solving and fault finding
* Able to cope with the inherent physical demands of the position
* Able to work shifts, on weekends and flexible hours
* Have reliable transport to and from work
*Qualification required:*
* N3 equivalent Mechanical qualification (NQF 4), Mechanical Trade (Fitter/ Turner/ Millwright)
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI0NzI2X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1185916&xid=1555_24726
2y
1
SavedSave
Our client based in Port Elizabeth / Gqeberha is looking for a experienced Electrical Draughtsman to join their team.
MINIMUM REQUIREMENTS:
Educational Qualifications:
• Grade 12.
• N6 in Electrical Engineering (NQF 6)
• BSc in Electrical Engineering (NQF 7) - Advantageous
Experience:
• Up to 3 years’ experience in Drawings/Design within the Manufacturing environment.
MINIMUM REQUIREMENTS:
Educational Qualifications:
• Grade 12.
• N6 in Electrical Engineering (NQF 6)
• BSc in Electrical Engineering (NQF 7) - Advantageous
Experience:
• Up to 3 years’ experience in Drawings/Design within the Manufacturing environment.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI0MjgzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1184216&xid=1555_24283
2y
1
SavedSave
*Reference: PE000720-NV-1*
Our client is seeking an Semi-skilled Electrician to join their team.
Open position : Semi-skilled Electrician
Location : Nelson Mandela Bay Area
Salary : Market related
Type : Project based (Contract)
Job requirements :
* Must only apply within the Nelson Mandela Bay Area
* Project based (Contract)
* Must be able to start immediately
Should you meet the above job requirements, please email your CV to (nanette@zwanda.co.za)(mailto:nanette@zwanda.co.za)
Please add “Semi-skilled Electrician” into the subject line of your email.
No reply after 2 weeks indicates that you have been unsuccessful.
R
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzIzNTAxX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1183280&xid=1555_23501
2y
Save this search and get notified
when new items are posted!
