Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Results for Engineering & Architecture jobs in Brackenfell
7
Dear Potential Candidate:
Kindly read the ad in detail until the end, before sending your CV.
We have a vacancy for a Senior Commissioning Technician to work on Fire Detection, CCTV, Access Control and other Security related systems. We operate in the middle to high-end of this specific market segment and are well established within the industry.
Minimum Requirements:
Minimum 3 years relevant experience is a definite pre-requisite. SAQCC registration for Fire Detection Systems is required. Training certificates to work on Fire Detection, Access Control & CCTV Systems will be an advantage and make you stand out from the rest of the applicants.
If you are looking for a new exciting career opportunity, please send your detailed CV with contactable references to hr@integratek.co.za.
We are looking for candidates who are seeking long term employment and are dedicated to develop their career within our company.
Responsibility:In return for your commitment and dedication we offer:
• 13th cheque
• Performance Incentives
• External Product Specific Training opportunities
• Company Cell Phone & Laptop if needed
• Company Vehicle with petrol card
• Market related Salary
Please apply by e-mailing a detailed professional CV with references to hr@integratek.co.za
Please note:
Should you not hear from us within 4 weeks, please consider your application unsuccessful. We advertise on a permanent basis to find suitable candidates to expand and grow the company.
PLEASE ONLY send your CV if:
You have a South African ID Document – we do not employ foreign nationals
You currently live in the Cape Town, Stellenbosch or George areas
You DO NOT have a criminal record
You have relevant technical experience – this position is NOT for general workers, security guards or technicians without relevant experience.
If you currently live in the Cape Town, Stellenbosch or George Areas – we do not employ people outside of the Cape Town, Stellenbosch and George areas.
Thank you, we look forward to receive your updated and most recent CV.Job Reference #: SnrCommissioningTechnician
4d
12
Dear Potential Candidate:
Kindly read the ad in detail until the end, before sending your CV.
Do you want to be a part of a company where staff are being respected and hard work and dedication being noticed and appreciated? We offer a work environment where people can grow and based on their performance and commitment can excel within the company.
We are focussed and dedicated and work hard to ensure we meet our targets, to offer annual increases and performance bonuses. We believe that “hard work pays” and we work hard as a team to achieve our goals. Teamwork is one of our core values and we believe that teamwork helps us to grow together and create a working environment where people look out for each other.
If you are an individual who is serious about your future and personal growth, please look at the current opportunity that we have available to grow our team.
We are looking for an experienced individual to fulfil the role as a Technical Site Manager to join our dynamic Projects team. You will be required to manage installations and the teams on site. We operate in the Electronic Security and Building Systems industry and are well established within the industry.
Our market focus is: Electronic Systems including: Access Control, CCTV & Fire Detection Systems and also Network infrastructure.
We require a minimum of 5 years relevant TECHNICAL & MANAGEMENT experience in the same field, this is a definite pre-requisite. Please DO NOT apply if you do not have any technical back ground in the Security and Electronic building systems industry.
If you are aged between 30 – 45 and looking for a new exciting career opportunity, please send your recently updated detailed CV with a recent colour photo and contactable references.
Minimum pre-requisites:
• Minimum of 5 years technical and site management experience in the same industry
• Experience in building relationships with clients
• Excellent communication skills - verbal and written
• High level of attention to detail and accuracy
• Strong planning and organising skills
• Strong interpersonal skills
• Self-managed and self-motivated
• Valid driver’s license
In return for your commitment and dedication we offer:
• a 13th cheque
• Company Vehicle, Cell phone and Laptop
• Pension & disability benefits
• Market related Salary
• Internal & External Product specific training
Please apply by e-mailing a detailed professional CV with references to hr@integratek.co.za
PLEASE NOTE: This position is for Cape Town, our office is located in the Brackenfell area, please DO NOT send your CV if you do not already stay in Cape Town.
Should you not hear from us within 4 weeks, please consider your application unsuccessful. We advertise on a permanent basis to find suitable candidates to expand and grow the company.
Thank you, we look forward to your application
Responsibility:Roles & Responsibilities:
Planning and Project Implementation:
o Ensure proper pre-planning and adjust to the constant changes on site
o Follow the site installation plan of action
o Prepare site for commissioning
o Installation of equipment on site
o Ensure that handover deadlines are met
Site Management:
o Promote safe working practises and ensure safe working conditions
o Manage projects effectively and profitably (Minimize wastage of resources, equipment and cabling)
o Ensure that stock requirements are communicated daily to the stock department
o Ensure accurate commissioning of systems/sites within project budget/time limits
o Ensure high quality level of all installations and workmanship
o Provide supervision of installation team on site
o Ensure effective management of team and resources on site.
o Attend all site meetings
o Correct Technical abilities to complete installations and basic commissioning at a high standard with the focus to get the job done right the first time.
o Ensure that all Vehicles/Tools/Equipment is in working order on site and in your vehicle and that any identified issues are communicated immediately.
Project Admin:
o Detailed capturing of as-built details on site drawings.
o Timeously submit Job Cards for invoicing
o Complete and manage all Health & Safety file requirements on site.
o Detailed daily feedback of active projects.
o Provide email feedback regarding site meetings
o Inform construction supervisor of site delays via email
o Manage telephone and email enquiries in a timely, efficient and professional manner
o Ensure Internal documents are accurate, filed and up to da
o Escalate any unresolved problems or issues of importance to Management
o Ensure that all deadlines are met within the given timeframe
Thank you, we look forward to receive your updated and most recent CV.
4d
1
Our client is based in Brackenfell, and they are seeking to employ Bending Operator / Lazer Cutting (CNC Operator).
Do you have a matric certificate and at least two years CNC working experience?
STRICT REQUIREMENTS:
• Completed Grade 12 / Matric Certificate (certificate will be requested).
• Milling and lathing experience will be an advantage.
• CNC Operating experience (Min 2 Years)
• Must be hardworking and dedicated.
• Clean criminal record.
To apply, send your updated CV to reception@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
reception@personastaff.co.za
3d
1
SavedSave
Our client based in the Northern Suburbs; Cape Town is seeking to employ a Semi-Skilled Carpenter with experience in Assembling / Carpentry work.
Requirements:
·Grade 12 / Senior Certificate
·Must have at least 1 years’ experience in a similar position.
·Must be available immediately.
·Be able to travel to Brackenfell.
·Cupboards, steel, tables, chairs, etc and welding.
To apply, please send your CV to reception@personastaff.co.za
Please note that only shortlisted candidates that meet the requirements will be contacted.
Persona Staff (Pty) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
reception@personastaff.co.za
4d
1
SavedSave
Our client is an innovative manufacturer of retail shop displays and furniture and they are looking to appoint a suitably qualified Mechanical Engineer to join their team.
Description of duties:
•Managing and overseeing the refrigeration and electrical division of the workshop.
•Act as support to the Production and Project Engineers.
•Assist with Technical design and drawing of all new and/or existing drawings as required in all departments.
•Improve, and develop design of existing processes, production units, machine parts, techniques and/or relevant components of plant machines.
•Assist and support maintenance team with the modification and correct application of mechanical changes to existing machinery.
•Accurate record keeping, issuing, and general control of all drawings at all times.
•Research of current / existing processes, machine parts, machine components, and/or techniques.
•Provide sound advice and support to R&D, Plant and Project engineers at all times.
•Costing, quoting and procurement of projects.
•Liaising with customers and site visits for project scoping and measurements
•Assist with mechanical design, development, review, documentation, and delivery.
•Project planning, updates, and reports.
Requirements:
•Matric / Grade 12.
•National Diploma / BTech or BEng Mechanical Engineering.
•Electrical / Refrigeration experience advantageous.
•Experience on Solid works & AutoCAD – Advantageous.
•Minimum of 3-5 years’ similar experience.
•Own transport and valid license.
•Fully computer literate.
Please send your application to craig@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
craig@personastaff.co.za
4d
1
SavedSave
Our client is an innovative manufacturer of retail shop displays and furniture and they are looking to appoint a suitably qualified junior draughtsman to join their team. The primary role of the Draughtsman is to provide working drawings and additional supplementary information to facilitate the design, manufacture and installation of bespoke joinery and metalwork.
Description of duties:
•Responsibilities include gathering drawings and specifications, calculating material and setting up production methods.
•Preparing, reviewing and redrafting alongside project teams.
•Create detailed designs with computer-aided design software.
•Assist with Production Planning.
•Assisting with programming of machines.
•Ensure regular housekeeping activities are execute and the execution of Standard Operating Procedures.
•Ensure efficient loading and unloading of sheet metal parts into and from Bending Machine.
Requirements:
•Matric / Grade 12.
•National certificate OR Diploma in Drafting.
•Minimum of 1-3 years’ similar experience as a draughtsman
•Joinery / furniture design experience
•Valid driver’s license with own transport.
•Experience with Solid works and CAD software .
• Must have exposure to the following:
o Sheet Metal Manufacturing including laser cutting, bending, and welding
o Process Design
o Been involved in the test phase.
o Been involved in the manufacturing phase.
o Staff and production management
Please send your application to craig@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff (PTY) Ltd. is POPIA (Protection of Personal Information Act, 2013) compliant.
craig@personastaff.co.za
4d
1
SavedSave
Our client based in the Northern Suburbs in the manufacturing industry is seeking a qualified Production Engineer to join their team.
Responsibilities:
Responsible for the planning of overall day to day production.
Management of production staff and all other related resources in the manufacturing system.
Develop daily or weekly production schedules to ensure that production deadlines are met.
Implement and maintain production processes and procedures that enhances productivity and efficiency.
Enforce regular housekeeping in the production facility.
Determine material, equipment, and labor requirements, prepare status and performance reports, and resolve production issues.
Provide weekly feedback to senior management on the progress of each job and proactively report all issues experienced.
Implement and maintain quality system that enhances and monitor the quality of all products produced.
Assist with administrative related duties to ensure all paperwork for jobs are done.
Requirements:
Matric / Grade 12.
National Diploma / BTech or BEng Mechanical or Industrial Engineering.
Electrical / Refrigeration experience advantageous
Minimum of 3-5 years’ similar experience
Own transport and valid license
Fully computer literate
Please send your application to hannah@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff (Pty) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
For more information please contact:
Hannah Boast on hannah@personastaff.co.za
hannah@personastaff.co.za
4d
1
SavedSave
Our client based in the Northern Suburbs is seeking a Millwright to join their team.
Requirements:
Grade 12 or equivalent.
N2 – N3 Engineering qualification.
Trade test certificate.
+3 years experience in a production environment.
Ability to do physical labor and work at heights.
A valid driver’s license.
Own reliable vehicle.
Willing to work overtime. (Shifts)
Responsibilities:
Read and interpret machine drawings to identify any problems.
Repairing of machinery as and when required (inclusive of breakdowns).
Service of machinery as per service guides.
Lubricate machinery as and when required.
Fitment of parts.
Ordering spares required to ensure machinery is maintained at an optimal condition.
Conduct preventative and routine maintenance as per machine guides.
Ensure that company tools and equipment are kept in a good condition.
Assist with production maintenance.
Assist with the training of Millwright Apprentices.
Ensure that machines are stopped if they are operating in an unsafe manner.
Ensure that the company’s quality standards are met and maintained in terms of the efficiency of the company’s machinery.
Adhere to the company’s Health and Safety policies and procedures as well as relevant Health and Safety legislation.
Maintain general housekeeping.
Any other tasks and duties as assigned.
To apply, please send your CV with your salary expectations to hannah@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff (Pty) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
hannah@personastaff.co.za
4d
1
SavedSave
Responsible for the set up and operate of machine to bend metal structural shapes, such as bars, rods, angles, pipes, and tubes, to angle or contour specified by work order, drawings, templates, or layout: Selects and bolts holding clamp, die block, and guide clamp to machine.
Education & Experience
• Matric.
• Minimum of 1-2 years’ experience in a similar position.
• Experience as a Bending Machine Operator or similar position.
• Experience in the Manufacturing and or Engineering sector.
• Bilingual (Afrikaans and English).
• Computer Literate.
• Driver’s license.
• Attention to detail.
• Good interpersonal communication skills both verbally and written.
• Problem-solving skills.
• Hardworking.
• Dedicated and reliable.
• Can work under pressure.
• Multi-tasking.
• Always willing to learn.
• Flexible with the ability to manage stress.
• Operate machines or equipment which weld, solder, bolt, screw or rivet metal parts together.
• Read specifications or follow verbal instructions.
• Troubleshoot and perform corrective action or minor repairs.
• May select and transport material to work area manually or using crane or hoist.
• Troubleshoot and perform corrective action or minor repairs.
• Build staging or erect scaffolding as required for heavy metalworking jobs.
• Clean or lubricate equipment and replace parts as required.
• Troubleshoot and perform corrective action or minor repairs.
• Check products for correct shapes, dimensions and other specifications.
• Observe and follow company safety rules and regulations.
• Work with others in order to ensure that equipment is in proper working order.
• Operate tools in order to aid in the manufacturing process.
• Responsible for complete of documentation.
• Must be able to analyze situations and find solutions.
reception@personastaff.co.za
4d
1
SavedSave
A client based in Northern Suburbs; Cape Town is seeking to employ Semi-Skilled candidates with experience in:
- Assembling / Carpentry work (Cupboards, steel, tables, and chairs etc.)
- Welding and/or boiler making skills.
All candidates must have basic experience with at least one of the mentioned skills.
Must have Matric.
Any welding / Boiler making, or carpentry / woodwork certificates is beneficial.
Must have at least 1 year experience.
Must be available immediately.
To apply, please send your CV to reception@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
Persona Staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
Please note that only shortlisted candidates that meet the requirements will be contacted.
Persona Staff (Pty) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy
reception@personastaff.co.za
4d
1
• Responsible for running the machines that prepare products.
• Operate packaging machinery of several types at varying stages of the production line, always performing actions quickly and safely.
Education & Experience:
• Matric.
• Relevant Tertiary Qualification.
• Minimum of 2 years’ experience in a similar position.
• Experience as a Packaging and Filling Machine Operator or similar position.
• Experience in the Manufacturing and or Engineering sector.
• Bilingual (Afrikaans and English).
• Computer Literate.
• Driver’s license.
• Attention to detail.
• Good interpersonal communication skills both verbally and written.
• Problem-solving skills.
• Hardworking.
• Dedicated and reliable.
• Can work under pressure.
• Multi-tasking.
• Always willing to learn.
• Flexible with the ability to manage stress
Description of duties:
• Responsible for filling containers, seal them and weigh them, and may prepare them in other ways as well.
• Sort and weigh products after packaging to ensure requirements are met and no mistakes have been made.
• Apply labels and transfer products to the final shipping area, keeping them organized to aid in shipping crew’s job.
• Complete paperwork and other minor administrative tasks at the beginning and end of your shift, carefully ensuring all information is entered correctly and clearly.
• Perform simple hourly maintenance on your machine to ensure it is completely functional and safe to operate.
• Support other machine operators to ensure no workers become fatigued or distracted during daily operation.
• Perceive the production line ahead of you to anticipate errors and adjust as needed to prevent slowing down more than necessary.
• Assist with duties in other departments.
• Teamwork is a key performance to ensure client satisfaction.
• Report malfunctions or errors to supervising staff immediately and relay important information about the issue.
reception@personastaff.co.za
4d
1
SavedSave
A client based in Brackenfell Northern Suburbs is seeking to employ CNC Machine Operator candidates.
Requirements:
Must have Matric.
Must be able to commute to the Brackenfell area.
Must have 1-2 years experience as a CNC operator.
Cnc Laser cutting experience (advantageous).
Relevant Machine Operation certificates (advantageous).
Must be available immediately.
Send CV to reception@personstaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
reception@personastaff.co.za
4d
1
Our client is based in Brackenfell, and they are seeking to employ Bending Operator/ Lazer Cutting (CNC Operator).
Do you have a matric certificate and at least two years CNC working experience?
STRICT REQUIREMENTS:
• Completed Grade 12 / Matric Certificate (certificate will be requested).
• Milling and lathing experience will be an advantage.
• CNC Operating experience (Min 2 Years)
• Must be hardworking and dedicated.
• Clean criminal record.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
reception@personastaff.co.za
4d
1
SavedSave
Our client based in Brackenfell Northern suburbs is seeking to employ candidates with assembling and electrical experience.
The position is mainly for refrigeration duties.
Able to learn for Troubleshoot, repair, or overhaul equipment such as, heat exchangers, other environmental changing devices, other mechanical equipment, or electronic components.
Execute the installation, maintenance, or repairing of refrigeration equipment at the client’s premises as and when the need arises on callouts.
Able to read gauges and instruments, and adjusts mechanisms such as valves, controls, and pumps to control level of fluid pressure and distribution in systems.
Execute soldering (brass, silver, copper), layout, and fitting of piping to industry standards.
Tests malfunctioning systems and components using electrical, mechanical, digital controls. and distribution in systems.
Requirements:
Grade 12 / Matric Certificate
Certificate: Electrical, Plumbing or Refrigeration (advantageous)
Must reside in Cape Town - able to commute to Brackenfell.
To apply, please send your CV and salary expectations to reception@personastaff.co.za
Please note that only shortlisted candidates will be contacted. If you have not heard from us within 48 hours after submitting your application, please consider yourself unsuccessful.
Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance with the legislation, you are welcome to request out POPI Act Policy.
reception@personastaff.co.za
4d
1
SavedSave
Our client based in Brackenfell, Northern suburbs is seeking to employ candidates with assembling and electrical experience.
The position is mainly for assembling and repairing of Refirgeration equipment.
Able to learn for Troubleshoot, repair, or overhaul equipment such as, heat exchangers, other environmental changing devices, other mechanical equipment, or electronic components.
Execute the installation, maintenance, or repairing of refrigeration equipment at the client’s premises as and when the need arises on callouts.
Able to read gauges and instruments, and adjusts mechanisms such as valves, controls, and pumps to control level of fluid pressure and distribution in systems.
Execute soldering (brass, silver, copper), layout, and fitting of piping to industry standards.
Tests malfunctioning systems and components using electrical, mechanical, digital controls. and distribution in systems.
Requirements:
Grade 12 / Matric Certificate
Certificate: Electrical, Plumbing or Refrigeration (advantageous)
Welding experience (beneficial)
Must reside in Cape Town - able to commute to Brackenfell.
Send your CV to reception@personastaff.co.za
Persona Staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
reception@personastaff.co.za
4d
1
SavedSave
Join Our Team as a junior project manager.
Are you passionate about merging technology with the art of food and drink? Do you thrive in dynamic environments where innovation is key? If so, we have the perfect opportunity for you!
About Us:
We are a leading manufacturing concern dedicated to crafting innovative and world-class retail merchandising solutions. As we venture into the realm of digital touchscreens in order to give our customers a better retail shopping experience. Were seeking a skilled Junior project manager to spearhead this exciting new division.
Your Role:
As a Junior Project Manager for our digital touchscreen division, you will:
•Facilitate the installation and setup of digital touchscreens ensuring seamless integration with our clients needs.
•Act as the primary liaison between our team and our valued clients, fostering strong relationships and understanding their unique requirements.
•Attend all Teams/Google Meets meetings with clients, providing expertise and support throughout the project lifecycle.
•Travel to sites locally and nationally as needed, immersing yourself in diverse environments to deliver exceptional solutions.
•As the junior projects manager, you will be the sole liaison in South Africa and will work directly with our seasoned international partner on the rollout of local projects.
Requirements:
To thrive in this role, youll need:
•Passion for technology with a keen interest in digital solutions.
•Excellent communication and interpersonal skills to collaborate effectively with clients and internal teams.
•Flexibility and adaptability to navigate varied project requirements and environments.
•Willingness to travel, with access to your own vehicle (which will be used and claimed back at the AA Rates)
•An IT background will be advantageous, but not essential.
Why Join Us?
By joining our team, youll be at the forefront of innovation in the retail industry, shaping the future of retail merchandising. Youll work alongside a talented and passionate team dedicated to excellence, with ample opportunities for growth and development.
Email your CV to craig@personastaff.co.za
Persona Staff (PTY) Ltd. is POPIA (Protection of Personal Information Act, 2013) compliant.
craig@personastaff.co.za
4d
1
SavedSave
Our client is based in Brackenfell, and they are seeking to employ Welders. Do you have a matric certificate and at least one years working experience within a welding or semi-skilled boiler making position?
Responsibilities:
· Completed Grade 12 / Matric Certificate (certificate will be requested).
· Welding experience a must (Arc / Mig / Stick).
· Fabrication experience is a MUST.
· Forklift license is beneficial.
· Assistant operating of machinery experience beneficial.
· Must be hardworking and dedicated.
· Ability and willingness to work 12-hour shifts, including nightshifts and weekends.
· Clean criminal record.
AREA: Brackenfell (Transport will be own responsibility)
APPLY: Send your CV and all documents to reception@personastaff.co.za
Please note that only short-listed candidates will be contacted.
reception@personastaff.co.za
21d
SavedSave
Must be in possession of a
valid driver’s licence.
·
Have at least 3 years trade
experience with balustrades, and steel staircases.
·
Be PC literate to liaise with
clients.
·
Provide updates on job
progressions.
·
Have at least 2 years Auto-cad
or Solid works experience.
·
Take accurate measurements on
site.
·
Provide shop drawings for
approval, and covert to fabrication drawings.
·
Be self-motivated and willing
to contribute as a team member.
·
Assist with initial site layout
with installation teams.
In return we offer:
·
Competitive salary.
·
Pleasant working
environment.
·
A chance to work with young
dynamic people.
4d
Save this search and get notified
when new items are posted!